Current issue: 53(1)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Acta Forestalia Fennica no. 226 | 1992

Category: Article

article id 7672, category Article
Herman Hakala. (1992). Mäntytukkien sahauksen järeyden mukainen taloudellinen tulos ja siihen vaikuttavia tekijöitä. Acta Forestalia Fennica no. 226 article id 7672. https://doi.org/10.14214/aff.7672
English title: Financial result of sawing Scots pine logs as influenced by top diameter and other associated factors.

The influence of log properties (diameter, length, taper, volume, density and quality), sawing pattern, yield, sawing efficacy, stoppages, consumption of electric power and thereby on the financial result of sawing was examined. In addition, the significance of various revenues and costs were studied from the point of view of the financial result of sawing. The revenues from sawing are composed of revenues obtained from sawn goods, chips, sawdust and bark. The costs in sawing are made of raw material, capital, labour, energy and other costs. The results were calculated per diameter class and applying the basic principle of targeting all returns and costs on the different diameter classes.

The results are based on test sawings of a total of 1,606 Scots pine logs representing eight diameter classes,  using conventional frame saw sawing patterns. In addition, a sawing simulator was used. Log top diameter had a significant influence on the financial result obtained when calculations were made per log volume. The financial result obtained for the biggest diameter class exceeded that of the smallest diameter class by FIM 99.1/m3. Sawing revenues accounted for FIM 66.0/m3 and sawing costs for FIM 33.1/m3 of this difference. In addition to being influenced by the top diameter, the yield and sawing efficacy were observed to have a clear influence on the financial result. The influence of stoppages was smaller.

The only means of gaining significant improvement in the annual result obtained from sawing were improvements in the revenues from sawn goods or reductions in the cost of raw material. Increase of the minimum diameter led to a significant improvement in the annual result obtainable from sawing only if the production time remained unchanged; i.e., when correspondingly more logs from the other diameter classes were sawn. If the production time was reduced by an amount corresponding to the increase in minimum diameter, then the annual result fell dramatically except in the case of minimum diameter.

The PDF includes a summary in English.

  • Hakala, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive