Current issue: 53(2)

Under compilation: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'GIS'.

Category: Research article

article id 9902, category Research article
Perttu Anttila, Vesa Nivala, Olli Salminen, Markus Hurskainen, Janne Kärki, Tomi J. Lindroos, Antti Asikainen. (2018). Regional balance of forest chip supply and demand in Finland in 2030. Silva Fennica vol. 52 no. 2 article id 9902. https://doi.org/10.14214/sf.9902
Highlights: The impact of increasing forest chip demand in 2030 was analyzed in Finland; Demand of small trees may exceed potential at the national level; Surplus potential will remain in logging residues and stumps; Hot spots of demand call for efficient logistical solutions.

According to the National Energy and Climate Strategy of Finland in 2016, the demand for forest chips, that is, wood chips made of forest biomass directly for energy use, could even double by 2030 compared to the present situation. A spatially explicit impact analysis of regional supply and demand balances for forest chips was carried out. The balances were calculated as the difference between technical harvesting potentials and demand. First, the technical potentials were estimated based on the national forest inventory data. Secondly, three demand scenarios were defined for 2030 and subsequently deducted from the potentials. The results suggested that there would be increasing competition for feedstock in southern and western Finland, whereas in eastern and northern Finland there would still be surplus potential. Moreover, due to the remarkable deficit of small trees in southern Finland, there might be pressure towards using more pulpwood-sized and/or imported wood in energy production. The results also showed that, in particular, large new plants consuming substantial amounts of forest chips could have a significant effect on the regional availability of forest chips. Moreover, with increasing transport distances, new logistical solutions will be needed.

  • Anttila, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland ORCID ID: http://orcid.org/0000-0002-6131-392X E-mail: perttu.anttila@luke.fi (email)
  • Nivala, Natural Resources Institute Finland (Luke), Eteläranta 55, FI-96300 Rovaniemi, Finland ORCID ID:E-mail: vesa.nivala@luke.fi
  • Salminen, Natural Resources Institute Finland (Luke), Latokartanonkaari 9, FI-00790 Helsinki, Finland ORCID ID:E-mail: olli.salminen@luke.fi
  • Hurskainen, VTT Technical Research Centre of Finland Ltd, Koivurannantie 1, FI-40400 Jyväskylä, Finland ORCID ID:E-mail: markus.hurskainen@vtt.fi
  • Kärki, VTT Technical Research Centre of Finland Ltd, Koivurannantie 1, FI-40400 Jyväskylä, Finland ORCID ID:E-mail: janne.karki@vtt.fi
  • Lindroos, VTT Technical Research Centre of Finland Ltd, Vuorimiehentie 3 (Espoo), P.O. Box 1000, FI-02044 VTT, Finland ORCID ID:E-mail: tomi.j.lindroos@vtt.fi
  • Asikainen, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland ORCID ID:E-mail: antti.asikainen@luke.fi
article id 1405, category Research article
Lauri Korhonen, Daniela Ali-Sisto, Timo Tokola. (2015). Tropical forest canopy cover estimation using satellite imagery and airborne lidar reference data. Silva Fennica vol. 49 no. 5 article id 1405. https://doi.org/10.14214/sf.1405
Highlights: The fusion of airborne lidar data and satellite images enables accurate canopy cover mapping; The zero-and-one inflated beta regression is demonstrated in large area estimation; Forest/non-forest classification should be done directly, for example by using logistic regression.

The fusion of optical satellite imagery, strips of lidar data and field plots is a promising approach for the inventory of tropical forests. Airborne lidars also enable an accurate direct estimation of the forest canopy cover (CC), and thus a sample of lidar strips can be used as reference data for creating CC maps which are based on satellite images. In this study, our objective was to validate CC maps obtained from an ALOS AVNIR-2 satellite image wall-to-wall, against a lidar-based CC map of a tropical forest area located in Laos. The reference CC values which were needed for model training were obtained from a sample of four lidar strips. Zero-and-one inflated beta regression (ZOINBR) models were applied to link the spectral vegetation indices derived from the ALOS image with the lidar-based CC estimates. In addition, we compared ZOINBR and logistic regression models in the forest area estimation by using >20% CC as a forest definition. Using a total of 409 217 30 × 30 m population units as validation, our model showed a strong correlation between lidar-based CC and spectral satellite features (root mean square error = 12.8%, R2 = 0.82). In the forest area estimation, a direct classification using logistic regression provided better accuracy than the estimation of CC values as an intermediate step (kappa = 0.61 vs. 0.53). It is important to obtain sufficient training data from both ends of the CC range. The forest area estimation should be done before the CC estimation, rather than vice versa.

  • Korhonen, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland; (current) University of Helsinki, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland ORCID ID: http://orcid.org/0000-0002-9352-0114 E-mail: lauri.z.korhonen@helsinki.fi (email)
  • Ali-Sisto, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: dheikkil@student.uef.fi
  • Tokola, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland. ORCID ID:E-mail: timo.tokola@uef.fi
article id 1377, category Research article
Raul Fernandez-Lacruz, Fulvio Di Fulvio, Dimitris Athanassiadis, Dan Bergström, Tomas Nordfjell. (2015). Distribution, characteristics and potential of biomass-dense thinning forests in Sweden. Silva Fennica vol. 49 no. 5 article id 1377. https://doi.org/10.14214/sf.1377
Highlights: Biomass-dense thinning forests (BDTF) cover 2.1–9.8 M ha in Sweden, which represents 9–44% of the country’s productive forest land area, depending on the constraints applied; 65% of BDTF area is found in northern Sweden; Analyses revealed a yearly harvesting potential of at least 4.3 M OD t of undelimbed whole trees (3.0 M OD t of delimbed stemwood including tops).

Understanding the characteristics of unutilized biomass resources, such as small-diameter trees from biomass-dense thinning forests (BDTF) (non-commercially-thinned forests), can provide important information for developing a bio-based economy. The aim of this study was to describe the areal distribution, characteristics (biomass of growing stock, tree height, etc.) and harvesting potential of BDTF in Sweden. A national forest inventory plot dataset was imported into a geographical information system and plots containing BDTF were selected by applying increasingly stringent constraints. Results show that, depending on the constraints applied, BDTF covers 9–44% (2.1–9.8 M ha) of the productive forest land area, and contains 7–34% of the total growing stock (119–564 M OD t), with an average biomass density of 57 OD t ha–1. Of the total BDTF area, 65% is located in northern Sweden and 2% corresponds to set-aside farmlands. Comparisons with a study from 2008 indicate that BDTF area has increased by at least 4% (about 102 000 ha), in line with general trends for Sweden and Europe. Analyses revealed that the technical harvesting potential of delimbed stemwood (over bark, including tops) from BDTF ranges from 3.0 to 6.1 M OD t yr–1 (7.5 to 15.1 M m3 yr–1), while the potential of whole-tree harvesting ranges from 4.3 to 8.7 M OD t yr–1 (10.2 to 20.6 M m3 yr–1) depending on the scenario considered. However, further technological developments of the harvest and supply systems are needed to utilize the full potential of BDTF.

  • Fernandez-Lacruz, Swedish University of Agricultural Sciences (SLU), Department of Forest Biomaterials and Technology (SBT), Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID: http://orcid.org/0000-0001-9284-8911 E-mail: raul.fernandez@slu.se (email)
  • Di Fulvio, Swedish University of Agricultural Sciences (SLU), Department of Forest Biomaterials and Technology (SBT), Skogsmarksgränd, SE-901 83 Umeå, Sweden; International Institute for Applied Systems Analysis (IIASA), Ecosystems Services and Management Program (ESM), Schlossplatz 1, A-2361 Laxenburg, Austria ORCID ID:E-mail: Fulvio.di.Fulvio@slu.se
  • Athanassiadis, Swedish University of Agricultural Sciences (SLU), Department of Forest Biomaterials and Technology (SBT), Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID:E-mail: Dimitris.Athanassiadis@slu.se
  • Bergström, Swedish University of Agricultural Sciences (SLU), Department of Forest Biomaterials and Technology (SBT), Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID:E-mail: Dan.Bergstrom@slu.se
  • Nordfjell, Swedish University of Agricultural Sciences (SLU), Department of Forest Biomaterials and Technology (SBT), Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID:E-mail: Tomas.Nordfjell@slu.se
article id 949, category Research article
Ken Olaf Storaunet, Jørund Rolstad, Erlend Rolstad. (2014). Effects of logging on the threatened epiphytic lichen Usnea longissima: an experimental approach. Silva Fennica vol. 48 no. 1 article id 949. https://doi.org/10.14214/sf.949
Highlights: A re-inventory of the threatened lichen Usnea longissima in ten Norway spruce forest stands where experimental selective loggings had been conducted 5 to 8 years before revealed that the number of lichen thalli had increased with 34%; The number of thalli increased more where the forest was open whether or not the low tree density was caused by the loggings.
Usnea longissima Ach. is a circumboreal epiphytic lichen draping tree canopies in moist coastal and mountainous forests. It is extinct from many European and North-American localities, presumably due to industrial forestry and air pollution, but still has a stronghold in parts of Scandinavia and U.S. and Canadian Pacific Northwest. In 2005/06 we used a comparative and retrospective approach to evaluate how present and historic tree and stand characteristics influenced the occurrence and abundance of the lichen (Storaunet et al. 2008). In 2012, we re-inventoried ten Norway spruce forest stands with 401 U. longissima-bearing trees and recorded changes in the number of U. longissima thalli. Seven of the stands had been experimentally, selectively logged 5–8 years before, where the lichen-bearing trees had been marked in the field and were avoided during the logging operation. Total number of lichen-bearing trees decreased slightly (2.9%), whereas the number of thalli had increased with 34%. Number of thalli increased more where the forest was open (low basal area, m2ha-1) whether or not the low tree density was caused by the logging events. At high tree densities the change in number of thalli was negligible. We suggest that selective logging, securing lichen-bearing trees, may be a viable management option to keep tree density from becoming too dense, thereby enhancing growth and establishment of U. longissima.
  • Storaunet, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail: stk@skogoglandskap.no (email)
  • Rolstad, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail: roj@skogoglandskap.no
  • Rolstad, Skogfaglig Rådgivning, Holmsida 126, NO-1488 Hakadal, Norway ORCID ID:E-mail: roe@skogoglandskap.no
article id 952, category Research article
Lauri Korhonen, Inka Pippuri, Petteri Packalén, Ville Heikkinen, Matti Maltamo, Juho Heikkilä. (2013). Detection of the need for seedling stand tending using high-resolution remote sensing data. Silva Fennica vol. 47 no. 2 article id 952. https://doi.org/10.14214/sf.952
Seedling stands are problematic in airborne laser scanning (ALS) based stand level forest management inventories, as the stem density and species proportions are difficult to estimate accurately using only remotely sensed data. Thus the seedling stands must still be checked in the field, which results in an increase in costs. In this study we tested an approach where ALS data and aerial images are used to directly classify the seedling stands into two categories: those that involve tending within the next five years and those which involve no tending. Standard ALS-based height and density features, together with texture and spectral features calculated from aerial images, were used as inputs to two classifiers: logistic regression and the support vector machine (SVM). The classifiers were trained using 208 seedling plots whose tending need was estimated by a local forestry expert. The classification was validated on 68 separate seedling stands. In the training data, the logistic model’s kappa coefficient was 0.55 and overall accuracy (OA) 77%. The SVM did slightly better with a kappa = 0.71 and an OA = 86%. In the stand level validation data, the performance decreased for both the logistic model (kappa = 0.38, OA = 71%) and the SVM (kappa = 0.37, OA = 72%). Thus our approach cannot totally replace the field checks. However, in considering the stands where the logistic model predictions had high reliability, the number of misclassifications reduced drastically. The SVM however, was not as good at recognizing reliable cases.
  • Korhonen, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: lauri.korhonen@uef.fi (email)
  • Pippuri, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: inka.pippuri@uef.fi
  • Packalén, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: petteri.packalen@uef.fi
  • Heikkinen, School of Computing, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: ville.heikkinen@uef.fi
  • Maltamo, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: matti.maltamo@uef.fi
  • Heikkilä, Finnish Forest Centre, Public Services, Maistraatinportti 4 A, FI-00240 Helsinki, Finland ORCID ID:E-mail: juho.heikkila@metsakeskus.fi
article id 899, category Research article
Franz Holzleitner, Christian Kanzian, Norbert Höller. (2013). Monitoring the chipping and transportation of wood fuels with a fleet management system. Silva Fennica vol. 47 no. 1 article id 899. https://doi.org/10.14214/sf.899
Controlling and organizing the complex forest-to-consumer supply chain of wood fuels is a challenging task, especially for the chipping and transport processes. Truck mounted chippers and transport trailer-trucks must be scheduled to minimize delay to be profitable. Job management within the supply chain, including machine activity based controlling, offers a new way to increase efficiency and productivity. However, detailed data are required to detect and analyze potential gaps and improve forest fuel supply. Generally, data regarding the wood fuel supply chain process are obtained from extensive time studies that are based on a specific process step. Although time studies can detect details during the production of forest fuels, they only describe certain time frames. Long-term data that are recorded during the entire year could encompass seasonal and short term effects. This study aims to monitor the forest fuel supply processes (semi-automated), specifically regarding time and fuel consumption. Large data sets were automatically and efficiently gathered with little effort by drivers and operators. Data were recorded with fleet management equipment for more than 14 months. Vehicle data, including GPS data, were logged at an interval of one minute. Data management was conducted in a pre-configured database that contained pre-defined reports and were run by the Institute of Forest Engineering, Vienna. Work step assignments were implemented with Structured Query Language (SQL)-routines by using the raw machine activities data and GPS. The chipping and transport activities of more than 240 loads were analyzed by focusing on fuel consumption, time needed and traffic. The average distance between chipping sites and plants was approximately 54 kilometers. Fuel consumption from transport reached 50 l/100 km. The chipping unit reached a productivity of 12.8 odt/PSH15 and had a fuel consumption of 58 liters per operating hour.
  • Holzleitner, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria ORCID ID:E-mail: franz.holzleitner@boku.ac.at (email)
  • Kanzian, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria ORCID ID:E-mail: christian.kanzian@boku.ac.at
  • Höller, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria ORCID ID:E-mail: norbert.hoeller@boku.ac.at
article id 49, category Research article
Kalle Karttunen, Kari Väätäinen, Antti Asikainen, Tapio Ranta. (2012). The operational efficiency of waterway transport of forest chips on Finland’s Lake Saimaa. Silva Fennica vol. 46 no. 3 article id 49. https://doi.org/10.14214/sf.49
New and cost-efficient methods for use in supply chains for energy wood should be found, to reach the targets of the renewable energy utilisation set by the European Union. The long-distance waterway transportation of forest fuels should be thoroughly investigated, especially in areas where the transport distance is long and waterways could provide a feasible method of conveying forest fuel. In comparison to transport of forest chips by truck, barge-based waterway transport shows a competitive advantage due to the larger loads and higher bulk density of chips it allows. The cost-efficiency of waterway transportation operations related to forest chips in Finland’s Lake Saimaa region was studied using practical demonstrations and discrete-event simulation. The varying demand for fuel wood in three separate bio-power plants on the Saimaa lakeside (near the cities of Varkaus, Mikkeli, and Savonlinna) was addressed in several barge transportation scenarios. Finally, the economy of barge transportation was compared to the economy of truck transportation as a function of transportation distance and in terms of the annual performance of the transportation methods examined. The waterway supply chain of forest chips was cost-competitive to road transport by truck after 100–150 km. According to the simulation study, the most economical waterway transport options were based on fixed barge system and shift-independent harbor logistics where loading and unloading of barges were carried-out with a wheeled loader and a belt conveyor. Total supply chain costs including the best waterway logistics from road side storage to power plant ranged from 10.75 euros to 11.64 euros/MWh in distances of 100–150 km by waterways. The energy-density of forest chips in the barge load was found to be, on average, 25% higher than that in truck hauling, because of the better compaction of chips. Waterway transport is a viable option for long-distance transportation of forest chips in Eastern Finland.
  • Karttunen, Lappeenranta University of Technology, LUT Savo Sustainable Technologies, Mikkeli, Finland ORCID ID:E-mail: kalle.karttunen@lut.fi (email)
  • Väätäinen, The Finnish Forest Research Institute, Joensuu, Finland ORCID ID:E-mail: kari.vaatainen@metla.fi
  • Asikainen, The Finnish Forest Research Institute, Joensuu, Finland ORCID ID:E-mail: antti.asikainen@metla.fi
  • Ranta, Lappeenranta University of Technology, LUT Savo Sustainable Technologies, Mikkeli, Finland ORCID ID:E-mail: tapio.ranta@lut.fi
article id 100, category Research article
Annika Kangas, Lauri Mehtätalo, Antti Mäkinen, Kalle Vanhatalo. (2011). Sensitivity of harvest decisions to errors in stand characteristics. Silva Fennica vol. 45 no. 4 article id 100. https://doi.org/10.14214/sf.100
In forest planning, the decision maker chooses for each stand a treatment schedule for a predefined planning period. The choice is based either on optimization calculations or on silvicultural guidelines. Schedules for individual stands are obtained using a growth simulator, where measured stand characteristics such as the basal area, mean diameter, site class and mean height are used as input variables. These characteristics include errors, however, which may lead to incorrect decisions. In this study, the aim is to study the sensitivity of harvest decisions to errors in a dataset of 157 stands. Correct schedules according to silvicultural guidelines were first determined using error-free data. Different amounts of errors were then generated to the stand-specific characteristics, and the treatment schedule was selected again using the erroneous data. The decision was defined as correct, if the type of harvest in these two schedules were similar, and if the timings deviated at maximum ±2 for thinning and ±3 years for clear-cut. The dependency of probability of correct decisions on stand characteristics and the degree of errors was then modelled. The proposed model can be used to determine the required level of measurement accuracy for each characteristics in different kinds of stands, with a given accuracy requirement for the timing of treatments. This information can further be utilized in selecting the most appropriate inventory method.
  • Kangas, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland ORCID ID:E-mail: annika.kangas@helsinki.fi (email)
  • Mehtätalo, University of Eastern Finland, School of Forest Sciences, Joensuu, Finland ORCID ID:E-mail:
  • Mäkinen, Simosol Oy, Riihimäki, Finland ORCID ID:E-mail:
  • Vanhatalo, Department of Forest Sciences, P.O. Box 27, FI-00014 University of Helsinki, Finland ORCID ID:E-mail:
article id 108, category Research article
Back Tomas Ersson, Urban Bergsten, Ola Lindroos. (2011). The cost-efficiency of seedling packaging specifically designed for tree planting machines. Silva Fennica vol. 45 no. 3 article id 108. https://doi.org/10.14214/sf.108
Today’s crane-mounted planting heads plant seedlings with biologically similar or better results than operational manual planting. However, the total cost of mechanized tree planting in southern Sweden must decrease at least 25% to compete economically with manual planting. Although seedlings packed in machine-specific packaging increase the productivity of planting machines by reducing seedling reloading time, they also increase logistics and investment costs. In this study, we analyzed the total cost of outplanting seedlings with an excavator-mounted Bracke Planter and seedlings packed according to four different concepts: cultivation trays, cardboard boxes, band-mounted seedlings in cardboard boxes and linked pots in container modules. The total cost per planted seedling was calculated for each packaging system as the sum of all costs from nursery to the recovery of empty packaging. The results showed that today’s system of transporting seedlings in cultivation trays is the most cost-efficient of the four alternatives. Machine-specific seedling packaging was 16–23% costlier per planted seedling than cultivation trays when trucking distances were 100 km. Sensitivity analyses indicated that machine-specific seedling packaging increased in cost-efficiency relative to cultivation trays primarily when more planting machines were contracted, but also as planting machine fixed costs and productivity increased. Moreover, the relative cost-efficiency of band-mounted seedlings, but not seedlings in container modules, increased with increasing trucking distance. Thus, we show that investments in machine-specific seedling packaging for today’s planting machines are justified only when the fixed costs, productivity and number of contracted planting machines increase substantially.
  • Ersson, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden ORCID ID:E-mail: back.tomas.ersson@slu.se (email)
  • Bergsten, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden ORCID ID:E-mail:
  • Lindroos, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden ORCID ID:E-mail:
article id 124, category Research article
Johannes Windisch, Lauri Sikanen, Dominik Röser, David Gritten. (2010). Supply chain management applications for forest fuel procurement – cost or benefit? Silva Fennica vol. 44 no. 5 article id 124. https://doi.org/10.14214/sf.124
It is commonly agreed that logistics is very demanding in forest fuel business. Even though logistics and supply chain management (SCM) tools already have found their way into forestry business, for example, in roundwood operations, they are not yet very widespread in the field of forest fuel procurement. The present study investigates if modern supply chain management applications are capable of increasing the profitability of forest fuel procurement operations. Since margins are low, decreasing the provision costs could boost wood-based bioenergy business. The study is based on the investigation of two Finnish forest owners associations (FOA) involved in forest fuel procurement using a modern SCM tool. The investigation is done by cost-benefit analysis (CBA) using the net present value (NPV) methodology to determine the profitability. According to the estimates made by the staff, which are based on data such as work time records and delivery notes from before and after introduction of the new system, in both FOAs, the benefits far outweigh the costs over a considered timespan of ten years. However, the amount of the NPV varied significantly. For FOA1, with an annual chip production of 150 000 loose m3, the NPV is 212 739 euro, while for FOA2, with an annual chip production of 37 000 loose m3, the NPV is 969 841 euro. Even if the NPV of FOA2 seems to be very high, the profitability of SCM tools in forest fuel procurement is clearly demonstrated. Additionally, the results indicate that a considerable cost saving potential in forest fuel procurement is attainable through improving work flows and thus reduce the work input.
  • Windisch, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail: johannes.windisch@metla.fi (email)
  • Sikanen, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail:
  • Röser, Finnish Forest Research Institute, Joensuu Research Unit, Yliopistokatu 6, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:
  • Gritten, University of Eastern Finland, School of Forest Science, Yliopistokatu 7, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail:
article id 141, category Research article
Per Kristian Rørstad, Erik Trømborg, Even Bergseng, Birger Solberg. (2010). Combining GIS and forest modelling in estimating regional supply of harvest residues in Norway. Silva Fennica vol. 44 no. 3 article id 141. https://doi.org/10.14214/sf.141
New and ambitious targets for renewable energy production put attention to increased supply of biomass. Harvest residues are only to a limited extent demanded by the traditional forest industries and represent an unutilized resource for increased production of renewable energy in Norway. The overall objective of this paper is to study how GIS and forest modelling can be combined to improve estimates of the supply of harvest residues, taking different environmental and economic constraints into consideration. The analyses are based on a case study of a forest area of more than 40 000 ha in Southern Norway divided into about 500 private forest properties. The study was carried out by computations of timber harvest using the forestry scenario model SGIS based on extensive forest inventory data at stand level. In the studied area energy utilization of harvest residues is not profitable below an energy price of about EUR 3.2/GJ (NOK 0.10 /kWh) when the distance from roadside to industry is 20 km. Above this level supply increases rapidly over a rather narrow price range and is nearly inelastic above EUR 4.1/GJ (NOK 0.12/kWh). We did not find significant negative shifts in the residues supply caused by changes in location of roundwood harvest over time. Exclusion of collection from stands with a site index (H40) below 14 reduced the potential supply of residues by 16–27%. The optimisation method combined selection of exogenous variables in order to map observed harvesting level and is probably the best approach to map future harvest.
  • Rørstad, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway ORCID ID:E-mail: per.kristian.rorstad@umb.no (email)
  • Trømborg, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway ORCID ID:E-mail:
  • Bergseng, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway ORCID ID:E-mail:
  • Solberg, Norwegian University of Life Sciences, Dept of Ecology and Natural Resource Management, Ås, Norway ORCID ID:E-mail:
article id 177, category Research article
Tuomo Nurminen, Heikki Korpunen, Jori Uusitalo. (2009). Applying the activity-based costing to cut-to-length timber harvesting and trucking. Silva Fennica vol. 43 no. 5 article id 177. https://doi.org/10.14214/sf.177
The supply chain of the forest industry has increasingly been adjusted to the customer’s needs for precision and quality. This has changed the operative environment both in the forest and on the roads. As the total removal of timber is increasingly divided into more log assortments, the lot size of each assortment decreases and the time consumed in sorting the logs increases. In this respect, the extra assortments have made harvesting work more difficult and affected the productivity of both cutting and forest transport; this has thus increased the harvesting costs. An activity-based cost (ABC) management system is introduced for timber harvesting and long-distance transport, based on the cut-to-length (CTL) method, in which the logistic costs are assigned to timber assortments and lots. Supplying timber is divided into three main processes: cutting, forest transport, and long-distance transportation. An ABC system was formulated separately for each of these main operations. Costs were traced to individual stands and to timber assortment lots from a stand. The cost object of the system is thus a lot of timber that makes up one assortment that has been cut, forwarded, and transported from the forest to the mill. Application of the ABC principle to timber harvesting and trucking was found to be relatively easy. The method developed gives estimates that are realistic to actual figures paid to contractors. The foremost use for this type of costing method should be as a tool to calculate the efficiency of an individual activity or of the whole logistic system.
  • Nurminen, Metsätoimisto Tuomo Nurminen, Joensuuntie 5 B 8, FI-41800 Korpilahti, Finland ORCID ID:E-mail:
  • Korpunen, Finnish Forest Research Institute, Parkano Research Unit, Kaironiementie 54, FI-39700 Parkano, Finland ORCID ID:E-mail:
  • Uusitalo, Finnish Forest Research Institute, Parkano Research Unit, Kaironiementie 54, FI-39700 Parkano, Finland ORCID ID:E-mail:
article id 464, category Research article
Christian Kanzian, Franz Holzleitner, Karl Stampfer, Sarah Ashton. (2009). Regional energy wood logistics – optimizing local fuel supply. Silva Fennica vol. 43 no. 1 article id 464. https://doi.org/10.14214/sf.464
The promotion of electric energy production from solid biomass by the Austrian government has lead to a boom in the construction of new combined heat and power plants. The current total demand for wood chips in the research area for energy purposes is 70 400 m3 of loose volume chips per year. The expected increase in demand due to these new plants is more than 4 times greater than current demand: up to 302 700 m3 of loose volume per year. Even if the energy wood feedstock potential is satisfactory, the design of the supply chain is still unresolved. The aim of this study is to give decision-makers a base for further development. To accomplish this, we designed and tested four different supply scenarios: one for 9 plants and one for 16 plants. The scenarios were developed using a combination of geographic information systems (GIS) and linear programming methods. The results indicate that direct transport of solid fuel wood as round wood and chipping at the plant is the cheapest supply system with a resulting cost of 5.6–6.6 EUR/m3 loose. Using harvesting residues can only be recommended for large plants because of poor fuel quality. In this case, residues would be chipped at or near the landing, piled and transported via self-loading trucks at a cost between 8.4 and 9.1 EUR/m3 loose. In order to meet increasing demand and to ensure a continuous supply, especially during the winter and spring seasons it is necessary to optimize the supply chain by including storage terminals. However, using terminals and increased demand both lead to higher logistical costs. For example, if the total volume is handled via terminals, the average supply costs including storage will increase by 26%. Higher demand increases the costs by 24%.
  • Kanzian, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail: christian.kanzian@boku.ac.at (email)
  • Holzleitner, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail:
  • Stampfer, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail:
  • Ashton, Southern Regional Extension Forestry, Forestry Bldg. 4-420, University of Georgia, Athens, GA 30602, USA ORCID ID:E-mail:
article id 464, category Research article
Christian Kanzian, Franz Holzleitner, Karl Stampfer, Sarah Ashton. (2009). Regional energy wood logistics – optimizing local fuel supply. Silva Fennica vol. 43 no. 1 article id 464. https://doi.org/10.14214/sf.464
The promotion of electric energy production from solid biomass by the Austrian government has lead to a boom in the construction of new combined heat and power plants. The current total demand for wood chips in the research area for energy purposes is 70 400 m3 of loose volume chips per year. The expected increase in demand due to these new plants is more than 4 times greater than current demand: up to 302 700 m3 of loose volume per year. Even if the energy wood feedstock potential is satisfactory, the design of the supply chain is still unresolved. The aim of this study is to give decision-makers a base for further development. To accomplish this, we designed and tested four different supply scenarios: one for 9 plants and one for 16 plants. The scenarios were developed using a combination of geographic information systems (GIS) and linear programming methods. The results indicate that direct transport of solid fuel wood as round wood and chipping at the plant is the cheapest supply system with a resulting cost of 5.6–6.6 EUR/m3 loose. Using harvesting residues can only be recommended for large plants because of poor fuel quality. In this case, residues would be chipped at or near the landing, piled and transported via self-loading trucks at a cost between 8.4 and 9.1 EUR/m3 loose. In order to meet increasing demand and to ensure a continuous supply, especially during the winter and spring seasons it is necessary to optimize the supply chain by including storage terminals. However, using terminals and increased demand both lead to higher logistical costs. For example, if the total volume is handled via terminals, the average supply costs including storage will increase by 26%. Higher demand increases the costs by 24%.
  • Kanzian, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail: christian.kanzian@boku.ac.at (email)
  • Holzleitner, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail:
  • Stampfer, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria ORCID ID:E-mail:
  • Ashton, Southern Regional Extension Forestry, Forestry Bldg. 4-420, University of Georgia, Athens, GA 30602, USA ORCID ID:E-mail:
article id 465, category Research article
Ken Olaf Storaunet, Jørund Rolstad, Målfrid Toeneiet, Erlend Rolstad. (2008). Effect of logging on the threatened epiphytic lichen Usnea longissima: a comparative and retrospective approach. Silva Fennica vol. 42 no. 5 article id 465. https://doi.org/10.14214/sf.465
Usnea longissima is a conspicuous circumboreal “beard lichen” draping tree canopies in moist coastal and mountainous forests. It is extirpated in many European and North-American localities, presumably due to industrial forestry and air pollution, but still has a stronghold in parts of Scandinavia and U.S. and Canadian Pacific Northwest. Using a retrospective approach, we reconstructed the stand histories in 24 plots (0.1 ha) of mature Norway spruce (Picea abies) forest stands in Lillehammer, Norway, of which 21 was selected due to the presence of U. longissima. Number of trees with U. longissima present within plots varied from 4 to 37 and number of visible thalli from 12 to 469. The detailed stand reconstructions were done by means of tree-ring analysis of 517 living trees and the size and decay stage of 1423 stumps from logging and 467 dead trees. Total harvested volume during the last 100 years ranged 100–370 m3ha–1 (representing 40–350% of the present-day standing volume), and present amount of dead wood ranged 2–87 m3ha–1 (1.0–37% of the standing volume). All stands had been selectively logged 2–4 times during the last 100 years, of which 5 stands almost to a clearcut appearance. We used a variety of present-day and historic forest structural variables, both at the scale of study plots and individual trees, to predict the occurrence and abundance of U. longissima. Although most forest stand variables failed in this respect, there were indications of a certain negative influence of the historic logging activity. Number of thalli present on trees showed a unimodal relationship to present-day tree density, indicating that medium dense forest stands are most favorable for U. longissima. We tentatively suggest that selective logging, securing lichen-rich trees, may be a viable management option to keep tree density at a moderate level in the long run, thereby enhancing growth and establishment of U. longissima.
  • Storaunet, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail: ken.storaunet@skogoglandskap.no (email)
  • Rolstad, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail:
  • Toeneiet, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail:
  • Rolstad, Norwegian Forest and Landscape Institute, P.O. Box 115, NO-1431 Ås, Norway ORCID ID:E-mail:
article id 284, category Research article
Tuomo Nurminen, Jaakko Heinonen. (2007). Characteristics and time consumption of timber trucking in Finland. Silva Fennica vol. 41 no. 3 article id 284. https://doi.org/10.14214/sf.284
Cost efficiency and flexibility have become increasingly important in the logistics of cut-to-length harvesting operations. At the same time, the operating conditions for long-distance transportation have become more demanding and variable. Since the number of log products has increased and the size of harvesting sites has decreased, loads of timber must increasingly be collected from several log decks, increasing the time consumption and costs of the trucking operation. The objectives of this study were to formulate time-consumption models for typical timber transportation activities in Finland and introduce a statistical procedure for examining the variation in time consumption during the trucking phases. The study used a combination of time studies and follow-up studies based on empirical data for 368 loads (a total volume of nearly 18 000 m3) collected from one wood procurement district in central Finland. The model included the following explanatory factors: driving distance, number of log decks, log product and load volume. Since transportation includes several phases and since many factors affect the work performance, significant variation in the total transportation time was observed. This makes planning and cost accounting more difficult. The models developed in this study are a promising initial tool to support route planning and optimization, and cost and profitability calculations for trucking entrepreneurs and the forest industry.
  • Nurminen, University of Joensuu, Faculty of Forest Sciences; Forest Agency Tuomo Nurminen, Joensuuntie 5 B 8, FI-41800 Korpilahti, Finland ORCID ID:E-mail:
  • Heinonen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:
article id 473, category Research article
Ulla Mattila, Tuula Nuutinen. (2007). Assessing the incidence of butt rot in Norway spruce in southern Finland. Silva Fennica vol. 41 no. 1 article id 473. https://doi.org/10.14214/sf.473
The aim of this study was to analyze the occurrence of butt rot damage to Norway spruce in different parts of southern Finland and to quantify the associated loss of quality. The data used in the study are from the 9th National Forest Inventory and consist of 5998 sample plots and 8007 spruce sample trees of saw-timber size. To predict the probability of damage to stands and trees, logistic regression models were constructed. Separate models were made for the whole study area, for the area where the general risk of Heterobasidion root and butt rot damage is high and for the area where the damage frequency is relatively low. In the high-risk area, the probability of damage decreased with increasing elevation and increased with increasing temperature sum. In addition, damage was more common on fertile sites and less common on peatlands; and thick peat layer decreased the risk of damage. The probability of damage was also higher in stands where special or selective cuttings had been carried out. In the sample tree data, the probability of damage increased slightly with increasing diameter and age of the tree. In the low-risk areas, elevation was the only variable that explained the probability of damage to a spruce tree. Site fertility and previous cuttings (more than ten years ago) explained the probability of damage to stands only weakly. For spruce damaged by butt rot, the saw-timber volume was reduced, on average, by 60% both in the high-risk area and in the low-risk area.
  • Mattila, The Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:
  • Nuutinen, The Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:
article id 316, category Research article
Sonja Vospernik. (2006). Probability of bark stripping damage by red deer (Cervus elaphus) in Austria. Silva Fennica vol. 40 no. 4 article id 316. https://doi.org/10.14214/sf.316
Bark stripping by red deer (Cervus elaphus) causes considerable damage to Austrian forests, however, the incidence of bark stripping was never examined from large scale survey data. In this manuscript we present a logistic regression model for bark stripping damage (static model) and a model for recent (5-year period) bark stripping damage to previously undamaged trees (dynamic model) developed from Austrian National Forest Inventory data. Both models showed bark stripping damage to be most frequent in core red deer habitat areas and less frequent in less suitable habitat. Damage was concentrated at elevations of 400–1200 m and in alluvial forests (only static model). Norway spruce (Picea abies), European ash (Fraxinus excelsior), Sweet chestnut (Castanea sativa) and Sorbus spp. had 11–12 times more injuries than all the other species. Red deer preferred the smallest trees with a breast height diameter of 5 cm for bark stripping and damage probability decreased rapidly for trees with a breast height diameter greater than 25 cm. Our static model showed a maximum of bark stripping damage in stands with a mean height of 20 m. In the dynamic model the probability for bark stripping damage decreased with decreasing mean height. Also, in the static model the probability for bark stripping damage increased with increasing spruce proportion and with increasing stand density whereas in the dynamic model the proportion of previous bark stripping damage was a good predictor. Goodness of fit and discrimination of both models were good. In combination with forest growth models, the bark stripping models can be used to predict the risk of damage associated with different forest and habitat management options.
  • Vospernik, University of Natural Resources and Applied Life Sciences, Institute of Forest Growth Research, Department of Forest and Soil Sciences, Peter-Jordan-Stra§e 82, A-1190 Vienna, Austria ORCID ID:E-mail: sonja.vospernik@boku.ac.at (email)
article id 347, category Research article
Gordon M. Hickey, John L. Innes. (2006). Monitoring and information reporting through regulation: an inter-jurisdictional comparison of forestry-related hard laws. Silva Fennica vol. 40 no. 2 article id 347. https://doi.org/10.14214/sf.347
In most jurisdictions, the rule of law has been the core instrument used to implement rules, regulations and restrictions relating to forests. The results of this approach have relied on the effectiveness of the system for regulating through monitoring and reporting. Despite the obvious differences in the wider operating environment of forestry internationally, issues related to globalization have increased the need for comparison. The potential impact of certain social, economic and environmental differences on the nature of monitoring and information reporting is, therefore, important to forest policy and management. The analysis presented here considered data associated with forestry-related monitoring and information reporting to provide a comparative description of certain hard-law requirements in a sample of jurisdictions. This was done to shed light on the potential for coordinated monitoring and information reporting objectives to be mandated through inter-jurisdictional hard law. Our research suggests that further comparative analysis of hard law monitoring and information reporting requirements could form a central theme in defining the ‘ground rules’ of a global forest law.
  • Hickey, University of British Columbia, Faculty of Forestry, Department of Forest Resources Management, 2045, 2424 Main Mall, UBC, Vancouver, Canada V6T 1Z4 ORCID ID:E-mail: ghickey@interchange.ubc.ca (email)
  • Innes, University of British Columbia, Faculty of Forestry, Department of Forest Resources Management, 2045, 2424 Main Mall, UBC, Vancouver, Canada V6T 1Z4 ORCID ID:E-mail:
article id 365, category Research article
Raffaele Spinelli, Carla Nati, Natascia Magagnotti. (2005). Harvesting and transport of root biomass from fast-growing poplar plantations. Silva Fennica vol. 39 no. 4 article id 365. https://doi.org/10.14214/sf.365
Recovery of tree root biomass can be attractive, since the stump-root system represents a substantial portion of the tree mass and its removal may prove instrumental to re-cultivation. Most available studies concern Nordic technologies, particularly suited to mature conifer stands. Unlike spruce, plantation poplar develops a deep taproot, whose extraction requires completely different methods. The aim of the study was to investigate poplar root recovery operations in plantations with time studies, and to determine the productivity and delivery costs of the operations. Seven operation systems developed to work with poplar plantations in Italian conditions were studied. Extraction and cleaning units were based on general-purpose prime movers. Under favourable conditions extraction and cleaning units achieved a very high productivity: 150 stumps per hour for the extraction unit and 170 for the cleaning unit. Delivered cost varied widely, ranging from 28 to 66 Euros Mg–1. Transportation was the most expensive single work task. It accounted for about 40% of the total recovery cost. Extraction and cleaning contributed approximately 25% each to the total cost, and loading 9%. Guidelines to recovery system improvement and efficient operation are provided.
  • Spinelli, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy ORCID ID:E-mail: spinelli@ivalsa.cnr.it (email)
  • Nati, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy ORCID ID:E-mail:
  • Magagnotti, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy ORCID ID:E-mail:
article id 519, category Research article
Magnus Lindén, Gudmund Vollbrecht. (2002). Sensitivity of Picea abies to butt rot in pure stands and in mixed stands with Pinus sylvestris in southern Sweden. Silva Fennica vol. 36 no. 4 article id 519. https://doi.org/10.14214/sf.519
Repeatedly sampled data from permanent experimental plots in southern Sweden were used to model butt rot development in Norway spruce growing in pure stands and in mixed stands with Scots pine. The data come from 29 sites with pure spruce, altogether 100 plots, and from 15 sites of mixed spruce and pine, altogether 22 plots. A logistic model provided the best fit to the data. The study material revealed that in mixed stands the proportion of spruce trees with butt rot is lower than in pure Norway spruce stands. The difference in the incidence of butt rot cannot be explained by silviculture or windthrow since both factors are accounted for in the study. The most significant effect on butt rot development in Norway spruce by an admixture of Scots pine, was found when the Scots pine admixture was 50%. In order to reduce the incidence of butt rot in Norway spruce, the study material indicate that there is little to be gained by increasing the Scots pine admixture to much more than 50%.
  • Lindén, Southern Swedish Forest Research Centre c/o Asa Experimental Forest, SLU, S-360 30 Lammhult, Sweden ORCID ID:E-mail: magnus.linden@ess.slu.se (email)
  • Vollbrecht, Southern Swedish Forest Research Centre c/o Asa Experimental Forest, SLU, S-360 30 Lammhult, Sweden ORCID ID:E-mail:
article id 593, category Research article
Anneli Jalkanen. (2001). The probability of moose damage at the stand level in southern Finland. Silva Fennica vol. 35 no. 2 article id 593. https://doi.org/10.14214/sf.593
The probability of moose damage was studied in sapling stands and young thinning stands in southern Finland. Data from the eighth National Forest Inventory in 1986–92 were used for modelling. The frequency of damage was highest at the height of two to five meters and at the age of ten to twenty years (at the time of measurement). Moose preferred aspen stands the most and least preferred Norway spruce stands. Scots pine and silver birch were also susceptible to damage. Logistic regression models were developed for predicting the probability that moose damage is the most important damaging agent in a forest stand. The best predictive variables were the age and dominant species of the stand. Variables describing the site were significant as cluster averages, possibly characterizing the area as a food source (fertility and organic soil), as well as the lack of shelter (wall stand). When sample plot, cluster and municipality levels were compared, it was found that most of the unexplained variance was at the cluster level. To improve the model, more information should be obtained from that level. The regression coefficients for aspen as supplementary species, and for pine as dominant species, had significant variance from cluster to cluster (area to area). It was also shown that the occurrence of aspen is closely connected to the occurrence of moose damage in pine sapling stands.
  • Jalkanen, Finnish Forest Research Institute, Unioninkatu 40 A, FIN-00170 Helsinki, Finland ORCID ID:E-mail: anneli.jalkanen@metla.fi (email)

Category: Review article

article id 9984, category Review article
Christoph Kogler, Peter Rauch. (2018). Discrete event simulation of multimodal and unimodal transportation in the wood supply chain: a literature review. Silva Fennica vol. 52 no. 4 article id 9984. https://doi.org/10.14214/sf.9984
Highlights: Focus on discrete event simulation, wood supply chain and multimodal transport; Analyses of 12 review articles and a core of 32 research papers, complemented by 48 related ones; Research focus from unimodal to multimodal transport to build efficient, resilient, green and socially sustainable supply chains; Development of robust risk management considering supply risks, demand risks and external risks is needed.

This review systematically analyses and classifies research and review papers focusing on discrete event simulation applied to wood transport, and therefore illustrates the development of the research area from 1997 until 2017. Discrete event simulation allows complex supply chain models to be mapped in a straightforward manner to study supply chain dynamics, test alternative strategies, communicate findings and facilitate understanding of various stakeholders. The presented analyses confirm that discrete event simulation is well-suited for analyzing interconnected wood supply chain transportation issues on an operational and tactical level. Transport is the connective link between interrelated system components of the forest products industry. Therefore, a survey on transport logistics allows to analyze the significance of entire supply chain management considerations to improve the overall performance and not only one part in isolation. Thus far, research focuses mainly on biomass, unimodal truck transport and terminal operations. Common shortcomings identified include rough explanations of simulation models and sparse details provided about the verification and validation processes. Research gaps exist concerning simulations of entire, resilient and multimodal wood supply chains as well as supply and demand risks. Further studies should expand upon the few initial attempts to combine various simulation methods with optimization.

  • Kogler, Institute of Production and Logistics, Department of Economics and Social Sciences, University of Natural Resources and Life Sciences, Vienna, Feistmantelstrasse 4, A-1180 Vienna, Austria ORCID ID: https://orcid.org/0000-0001-8811-152X E-mail: christoph.kogler@boku.ac.at (email)
  • Rauch, Institute of Production and Logistics, Department of Economics and Social Sciences, University of Natural Resources and Life Sciences, Vienna, Feistmantelstrasse 4, A-1180 Vienna, Austria ORCID ID: http://orcid.org/0000-0002-5812-4415 E-mail: peter.rauch@boku.ac.at

Category: Research note

article id 60, category Research note
Dominik Röser, Blas Mola-Yudego, Robert Prinz, Beatrice Emer, Lauri Sikanen. (2012). Chipping operations and efficiency in different operational environments. Silva Fennica vol. 46 no. 2 article id 60. https://doi.org/10.14214/sf.60
This research analyses the productivity of energy wood chipping operations at several sites in Austria and Finland. The aim of the work is to examine the differences in productivity and the effects of the operational environment for the chipping of bioenergy at the roadside. Furthermore, the study quantifies the effects of different variables such as forest energy assortments, tree species, sieve size and machines on the overall productivity of chipping. The results revealed that there are significant differences in the chipping productivity in Austria and Finland which are largely based on the use of different sieve sizes. Furthermore, the different operational environments in both countries, as well as the characteristics of the raw material also seem to have an effect on productivity. In order to improve the chipping productivity, particularly in Central European conditions, all relevant stakeholders need to work jointly to find solutions that will allow a greater variation of chip size. Furthermore, in the future more consideration has to be given to the close interlinkage between the chipper, crane and grapple. As a result, investments costs can be optimized and operational costs and stress on the machines reduced.
  • Röser, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail: dominik.roser@metla.fi (email)
  • Mola-Yudego, University of Eastern Finland, School of Forest Sciences, Joensuu, Finland ORCID ID:E-mail:
  • Prinz, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:
  • Emer, University of Padova, Department of Land, Agriculture and Forest Systems, Legnaro (PD), Italy ORCID ID:E-mail:
  • Sikanen, University of Eastern Finland, School of Forest Sciences, Joensuu, Finland ORCID ID:E-mail:
article id 269, category Research note
Christian Kiffner, Elisabeth Rössiger, Oliver Trisl, Rainer Schulz, Ferdinand Rühe. (2008). Probability of recent bark stripping damage by red deer (Cervus elaphus) on Norway spruce (Picea abies) in a low mountain range in Germany – a preliminary analysis. Silva Fennica vol. 42 no. 1 article id 269. https://doi.org/10.14214/sf.269
Red deer (Cervus elaphus) can cause considerable damage to forest stands by bark stripping. Here, we examined the probability of bark stripping of susceptible Norway spruce (Picea abies) during winter in relation to local environmental characteristics in the western Harz Mountains, Lower Saxony, Germany. We present the results of a multiple logistic regression model for recent bark stripping damage by red deer which we developed from two systematic cluster sampling inventories after two winter periods along with associated meteorological data and records of bagged deer. Our model suggests that the risk of bark stripping increased significantly (P  0.05) with rising slope angle, cumulating snow depth and increasing index values of red deer population density. Spruces growing in closed forest stands were debarked at a higher probability than spruces located close to forest edges. Further on, spruce stands on eastern slopes had a lower probability of bark damage than spruce stands on northern slopes. Other tested variables (altitude, length of daily solar irradiation, duration of snow cover, age of spruce stand within the age range of 16–50 years) had no significant effect on the probability of new bark stripping. We conclude that red deer in the western Harz Mountains seem to use bark as food resource at preferred locations and in times of low food availability. To improve fit and predictive power of bark stripping models we recommend including stand characteristics. We propose to reduce the population size of red deer in order to diminish bark stripping damages to an economically acceptable level.
  • Kiffner, University Göttingen, Büsgen-Institute, Department of Forest Zoology and Forest Protection incl. Wildlife Biology and Game Management, Büsgenweg 3, 37077 Göttingen, Germany ORCID ID:E-mail: ckiffne@gwdg.de (email)
  • Rössiger, University Göttingen, Büsgen-Institute, Department of Forest Zoology and Forest Protection incl. Wildlife Biology and Game Management, Büsgenweg 3, 37077 Göttingen, Germany ORCID ID:E-mail:
  • Trisl, Planungsbüro Trisl, In der Schleene 7, 36037 Waake, Germany ORCID ID:E-mail:
  • Schulz, University Göttingen, Büsgen-Institute, Department of Ecological Informatics, Biometry and Forest Growth, Büsgenweg 4, 37077 Göttingen, Germany ORCID ID:E-mail:
  • Rühe, University Göttingen, Büsgen-Institute, Department of Forest Zoology and Forest Protection incl. Wildlife Biology and Game Management, Büsgenweg 3, 37077 Göttingen, Germany ORCID ID:E-mail:

Category: Article

article id 7427, category Article
Toivo J. Komsi. (1954). Metsänhoitolain kaavailua sotatalvena 1944. Acta Forestalia Fennica vol. 61 no. 15 article id 7427. https://doi.org/10.14214/aff.7427
English title: Draft proposals for a forest management act in Finland drawn up in the wartime winter of 1944.

A state committee report proposing the enactment of a Forest Management Act has recently been published in Finland. The act is intended to be considerably more binding on forest owners than the present law concerning private forests which it would replace. The author assumes that the publication will raise a keen discussion that will ensue pro and contra the proposed law. The article includes a review of the first draft for a Forest Management Act prepared in the wartime winter of 1944. At that time the then minister of forestry N.A. Osara and professor Eino Saari had studied the draft. The former commented the act to the author by saying that after the return of peace the forests would have to be prepared to be restored to good condition, using radical measures if necessary. He foresaw that a proposal for the forest management law might meet with some resistance, but thought it was important enough to be forced through nevertheless. Professor Saari pointed out that bearing in mind that hardly any other country in the world is dependent upon her forests to such a decree as Finland, the requirement expressed in the draft (forests must be managed with a view to the most advantageous return as regards tree species, quality and quantity) must be considered justified. The author hopes that despite the prevailing resistance foreseen by Osara, a law will be enacted to correct the situation under the present law which tends to leave the management of our forests to the mercy of arbitrary decisions.

The Silva Fennica issue 61 was published in honour of professor Eino Saari‘s 60th birthday.

The PDF includes a summary in English.

  • Komsi, ORCID ID:E-mail:
article id 7420, category Article
Thorsten Streyffert. (1954). Forest policy in Sweden. Acta Forestalia Fennica vol. 61 no. 8 article id 7420. https://doi.org/10.14214/aff.7420

Forest policy can be traced several hundred years back in Sweden. One of the early restrictions was related to iron industry, which was dependent on supply of charcoal. This led in the 17th century to the regulation of the industry in order to fit its capacity to the sustained yield of the forests. Also the early sawmill industry was kept under supervision in the mining districts in order not to compete with the iron industry of the forests resources.

In 1903 the fears of shortage of wood, caused by a few decades of unrestricted use of forests and the rise of pulp and paper industries, resulted in the first forest law (enacted in 1905). The leading principle of the law was that the owner of the forest had to secure reforestation after felling. When previously the regulation had limited the fellings within the sustainable yield of the forests, the new law aimed at promoting the productive capacity of the forests. New felling methods were developed and the new practices were spread to the forest owners with help of education, propaganda and giving advice. One important factor in the success of the forest law was founding of County forestry boards, which are the main agencies to materialize the constructive ideas of the new forest policy.

The First National Forest Survey was conducted in 1923-29, followed by the second in 1938, and third in 1954. A new forest law came into force in 1923, which prohibited the cutting of immature forests in other ways than by thinning. In 1948, new amendments of the law were introduced, which, for instance allowed the forest owner to put part of the income derived from the timber sales into a bank account to be later used in reforestation.

The Silva Fennica issue 61 was published in honour of professor Eino Saari‘s 60th birthday.

  • Streyffert, ORCID ID:E-mail:
article id 7237, category Article
A. Oppermann. (1929). De danske skovlove og deres historie. Acta Forestalia Fennica vol. 34 no. 24 article id 7237. https://doi.org/10.14214/aff.7237
English title: Danish forest legislation and its history.

The paper describes the history of legislation concerning the use of forests in Denmark. The land area covered by forests has decreased to only 3–4% of the total land area of Denmark already for several hundreds of years ago. Regulations concerning the right to cut forests have been included in the legislation as early as in the 1200s. In 1781 was enacted a decree that stipulated the use of state forests and peatlands. In 1920, a forest act that concerns all the forests in the state was prepared.

  • Oppermann, ORCID ID:E-mail:
article id 7233, category Article
Nils Schager. (1929). Nordsveriges skogspolitiska problem. Acta Forestalia Fennica vol. 34 no. 20 article id 7233. https://doi.org/10.14214/aff.7233
English title: Forest policy problems in northern Sweden.

Forests and forestry in northern Scandinavia is affected by the climate, as well as economic and demographic questions. In northern Norway the issues of forest management are related to broadleaved forests, in Northern Sweden and Finland, the forests are mainly coniferous. These forests are still mostly primeval forests as the exploitation of the forests have begun slower than in the south. The Finnish forests are mainly owned by the state which makes the challenges of forestry a management problem within the Forest Service. In Sweden, the rational use of forest resources of the north has been lively discussed. Rational management of forests has begun in the southern and central parts of the country, but as the rationalization process reached the northern Sweden, many biological, economic and forest policy problems emerged. This paper outlines the forest resources, forest policy and legislation (so called lappmarkslag, an act that regulate the use of forest in the region) concerning the problems of forest management in northern Sweden.

  • Schager, ORCID ID:E-mail:
article id 5617, category Article
Teijo Palander. (1997). A local DLP-GIS-LP system for geographically decentralized wood procurement planning and decision making. Silva Fennica vol. 31 no. 2 article id 5617. https://doi.org/10.14214/sf.a8518

Linear programming (LP) is an important method for allocation of wood inventory stock. It is, for instance, used alone in tactical planning systems, which currently are in wide use at the higher hierarchical level in the functionally decentralized planning of the Finnish forest industry. Unfortunately, LP as a solution method has not been capable of handling spatial data that seem to characterize planning systems in geographical decentralization. In the present study, GIS was used to assimilate data from different wood procurement functions, to calculate transportation distances and cost figures, and to write the data in ASCII files, which were then used as input for the LP model. Using the experiments and methods of GIS on a planning system developed according to participatory planning, the results of this study suggest that the participatory method was faster than the conventional LP method, when solved using actual data. The participatory method was also capable of providing the same global optimum for a wood allocation problem. The implications of these results for improving operational and tactical planning of wood procurement in Finland are discussed.

  • Palander, ORCID ID:E-mail:
article id 5614, category Article
Mika Jääskelä, Kari Heliövaara, Mikko Peltonen, Hannu Saarenmaa. (1997). Comparison of protection methods of pine stacks against Tomicus piniperda. Silva Fennica vol. 31 no. 2 article id 5614. https://doi.org/10.14214/sf.a8515

Three most promising protection methods of pine pulp wood stacks against the attacks of Tomicus piniperda L. were compared. The methods were the covering of stacks by fibreglass-strengthened paper or twofold achrylene netting, removing the upper parts of stacks, and enhanced planning of the placement of the timber store using ARC/INFO GIS-software. T. piniperda was observed to strongly prefer the upper parts of the stacks: 90 % of the beetles occurred within 0.5 meters of the top of the stacks. Covering of the stacks decreased the attack density of T. piniperda, and the protection effect of covering was 80 %. Due to long transport distances and fragmentation of forest landscape the relocation of timber store was found to be an unsuitable method in the practical level. Also, taking into account the costs of the method, removing of the upper parts of stacks was considered to be the optimal solution.

  • Jääskelä, ORCID ID:E-mail:
  • Heliövaara, ORCID ID:E-mail:
  • Peltonen, ORCID ID:E-mail:
  • Saarenmaa, ORCID ID:E-mail:
article id 5584, category Article
Tarmo Virtanen, Seppo Neuvonen, Pekka Niemelä, Ari Nikula, Martti Varama. (1996). Climate change and the risks of Neodiprion sertifer outbreaks on Scots pine. Silva Fennica vol. 30 no. 2–3 article id 5584. https://doi.org/10.14214/sf.a9229

The European Pine Sawfly (Neodiprion sertifer Geoffroy) is one of the most serious defoliators of Scots pine (Pinus sylvestris L.) in northern Europe. We studied the pattern in the regional occurrence of the outbreaks of N. sertifer in Finland in years 1961-90, and made predictions about the outbreak pattern to the year 2050 after predicted winter warming. We tested whether minimum winter temperatures and forest type and soil properties could explain the observed outbreak pattern. We analysed outbreak patterns at two different spatial levels: forest board- and municipal-level.

The proportion of coniferous forests on damage-susceptible soils (dry and infertile sites) explained a significant part of the variation in outbreak frequency at small spatial scale (municipalities) but not at large spatial scale (forest boards). At the forest board level, the incidence of minimum temperatures below -36 °C (= the critical value for egg mortality) explains 33% of the variation in the outbreak pattern, and at the municipal level the incidence of cold winters was also the most significant explaining variable in northern Finland. Egg mortality due to cold winters seems to be the most parsimonious factor explaining why there have been so few N. sertifer outbreaks in northern and north-eastern Finland. We predict that climate change (increased winter temperatures) may increase the frequency of outbreaks in eastern and northern Finland in the future.

  • Virtanen, ORCID ID:E-mail:
  • Neuvonen, ORCID ID:E-mail:
  • Niemelä, ORCID ID:E-mail:
  • Nikula, ORCID ID:E-mail:
  • Varama, ORCID ID:E-mail:
article id 5555, category Article
Mauno Pesonen, Arto Kettunen, Petri Räsänen. (1995). Modelling non-industrial private forest landowners’ strategic decision making by using logistic regression and neural networks: Case of predicting the choice of forest taxation basis. Silva Fennica vol. 29 no. 2 article id 5555. https://doi.org/10.14214/sf.a9206

In this study, logistic regression and neural networks were used to predict non-industrial private forests (NIPF) landowners’ choice of forest taxation basis. The main frame of reference of the study was the Finnish capital taxation reform of 1993. As a consequence of the reform, landowners were required to choose whether to be taxed according to site-productivity or realized-income during the coming transition period of thirteen years.

The most important factor affecting the landowners’ choice of taxation basis was the harvest rate during the transition period, i.e. the chosen timber management strategy. Furthermore, the estimated personal marginal tax rate and the intention to cut timber during next three years affected the choice. The descriptive landowner variables did not have any marked effect on the choice of forest taxation basis.

On average, logistic regression predicted 71% of the choices correctly; the corresponding figure for neural networks was 63%. In both methods, the choice of site-productivity taxation was predicted more accurately than the choice of realized-income taxation. An increase in the number of model variable did not significantly improve the results of neural networks and logistic regression.

  • Pesonen, ORCID ID:E-mail:
  • Kettunen, ORCID ID:E-mail:
  • Räsänen, ORCID ID:E-mail:
article id 5296, category Article
Russell K. Henly, Paus V. Ellefson. (1986). Cost and effectiveness of legal mandates for the practice of forestry on private land. Silva Fennica vol. 20 no. 4 article id 5296. https://doi.org/10.14214/sf.a27752

Comprehensive state laws regulating the practice of forest management on private lands are in effect in seven of the United States. Established to protect a wide range of non-timber forest resources and to ensure reforestation after harvest, these laws may impose significant administrative costs on states and significant compliance costs on landowners and timber operators. Total state administration costs for 1984 are estimated at $10.1 and total private sector compliance costs are estimated at $120.5 million, for a total regulation cost of $130.6 million.

The resource protection effectiveness of state forest practice regulation is difficult to quantify. However, agreement is strong that regulation has led to significant improvements in forest resource conditions and has helped to increase reforestation.

  • Henly, ORCID ID:E-mail:
  • Ellefson, ORCID ID:E-mail:
article id 5289, category Article
Karl Gustaf Löfgren. (1986). Effects of permanent and non-permanent forest policy means on timber supply. Silva Fennica vol. 20 no. 4 article id 5289. https://doi.org/10.14214/sf.a27745

To conduct an efficient forest policy, both a normative and a positive theory are necessary. In addition, however, the explicit intertemporal considerations in natural resource economics demand that it is made crystal clear which means are permanent and which are non-permanent. The permanent case is far from easy to solve.

That the theoretical problems have practical relevance is shown by Swedish experience. A practical course of action is to weight possible positive effects from a permanent subsidy against possible deleterious outcomes. It is also desirable to avoid jerkiness in forest policy, which is likely to create uncertainty about the permanence of permanent means.

Law may sometimes be more efficient in creating ”credibility” than economic incentives. Regeneration has been mandatory in Sweden since 1903, and nobody refrains from cutting because he believes that regeneration duty will be abolished in some near future.

  • Löfgren, ORCID ID:E-mail:
article id 5282, category Article
Franz Schmithüsen. (1986). The changing role of legislation related to forest conservation and forest resources development. Silva Fennica vol. 20 no. 4 article id 5282. https://doi.org/10.14214/sf.a27719

Forest legislation is one of the important institutional elements for the development and expansion of the forest sector. It provides the structural framework within which national forest policies are set and in turn reflects or should reflect their objectives and priorities. It is also an indispensable instrument for the implementation of those policies.

Forest laws in the sector specific sense have been modified and developed considerably during the last decades. They tend to incorporate more and more provisions on environmental protection and natural resources management and become de facto part of such legislation. Forest legislation as a whole can today only be interpreted meaningfully if it is considered within the framework of an expanding legal system for environmental conservation and social development.

  • Schmithüsen, ORCID ID:E-mail:
article id 5107, category Article
Lars Lönnstedt. (1981). The influence of Swedish forestry policy on the annual cuts of private woodlot owners. Silva Fennica vol. 15 no. 1 article id 5107. https://doi.org/10.14214/sf.a15048

The purpose of this paper is to discuss the effect that the various measures by society have on bringing the level of the annual cut by private woodlot owners in line with the forestry policy goal of a long-term sustained yield of wood. The objectives and measures of forest policy in Sweden are described, as well as the central relations which explain the development in the logging policies of the private woodlot owners.

The goal of Swedish forestry policy has long been to safeguard a sustained yield of wood. This demand has successively been tightened, defined and detailed. The principle measure employed by the authorities to obtain the goal has been silvicultural legislation.

The author summarises that of all the means available of influencing the logging policy of private woodlot owners the most effective is silvicultural legislation. However, when viewed in an historical perspective, the legislation has not been able to significantly regulate the level of the annual cut. Nevertheless, at a time when there is a shortage of wood materials the legislation will undoubtedly exert a greater influence. Changes in forest taxation could prove to be an effective means in future of, for example, achieving an increase in the annual cut of private woodlot owners.

  • Lönnstedt, ORCID ID:E-mail:
article id 7023, category Article
August Renvall. (1919). Suojametsäkysymyksestä III. Metsän suojeleminen kuloilta. Acta Forestalia Fennica vol. 11 no. 2-3 article id 7023. https://doi.org/10.14214/aff.7023
English title: Protection forests III.

The third part of the six-article series about protection forest in Northern Finland describes prevention of forest fires in the pine timber line area. The article gives a proposal for a forest fire decree. According to the proposal, lighting a campfire should be prohibited in dry and windy times. Vegetation should be cleared around a campfire in the summertime. The local people should be obliged to help to extinguish any forest fire, and given compensation for the work. The compensation would be claimed from the person who lit the fire, if that is known. A fine is collected if forest fire breaks out by negligence. 

The article is divided in six parts. The parts II and III of the article series are included in the same PDF. A German summary is in a separate PDF.

  • Renvall, ORCID ID:E-mail:
article id 4914, category Article
Antero Piha. (1975). Metsänhoitoyhdistyslain syntyvaiheet. Silva Fennica vol. 9 no. 1 article id 4914. https://doi.org/10.14214/sf.a14758
English title: The creation of the Act on Forest Owners’ Associations passed in 1950.

The paper, which was written already at the turn of the year 1950–51, gives a quite detailed description of the early history of the Act on Forest Owners’ Associations, which was passed on 17 November 1950 and is still in force, of the long-lasting and multifarious preparations involved with it, and of its consideration in the parliament. In most parties there were both supporters and opponents; only the social democrats voted harmoniously for the act and the people’s democrats against it.

The PDF includes a summary in English.

  • Piha, ORCID ID:E-mail:
article id 7017, category Article
A. J. Bonsdorff. (1918). Beiträge zur Kenntnis der Sturmschäden in Finnland. Acta Forestalia Fennica vol. 8 no. 2 article id 7017. https://doi.org/10.14214/aff.7017
English title: Writings on knowledge on wind damages in Finland.

The article represents, based on meteorological data from 1900-1910 and 1911-1915 and annual reports of forest directorate with descriptions or statistics about wind damages of trees in state owned lands, the biggest storms in Finland and the damage they have caused to forests. The most powerful storms of the studied period and damages they caused are presented.  

It was found out that the storm damages take place primarily during the growing season. Frozen ground and a snow cover protects the trees from falling.
  • Bonsdorff, ORCID ID:E-mail:
article id 7016, category Article
A. J. Bonsdorff. (1917). Studien über die Sturmrichtungen in Finnland. Acta Forestalia Fennica vol. 8 no. 1 article id 7016. https://doi.org/10.14214/aff.7016
English title: Studies on directions of the storms in Finland.

There are lot of storm damages in the Finnish forests. They are particularly common in forests logged as strips or with clear cuts, but not absent in selection forestry either. To protect the forests from natural disasters requires more intensive management. For the forestry purposes it is important to know the most common wind directions of different parts of the country. The paper finds out which stormy wind directions are most dangerous to Finnish forests and hence need to be mostly taken into consideration when planning logging operations.  The study is based on meteorological data that has been compared with the reports of storm damages in state owned forests.

The most storm damage take place during the growing season, and to some extent in late fall. The regeneration felling should take place against the primary direction of the stormy winds. The paper represents the most common wind directions for different parts of the country. However, the wind directions may vary from the primary with local conditions such as altitude differences. 

  • Bonsdorff, ORCID ID:E-mail:
article id 7514, category Article
Pekka Ripatti. (1996). Factors affecting partitioning of private forest holdings in Finland. Acta Forestalia Fennica no. 252 article id 7514. https://doi.org/10.14214/aff.7514

Questions of the small size of non-industrial private forest (NIPF) holdings in Finland are considered and factors affecting their partitioning are analysed. This work arises out of Finnish forest policy statements in which the small average size of holdings has been seen to have negative influence on the economics of forestry. A literature survey indicates that the size of holdings is an important factor determining the costs of logging and silvicultural operations, while its influence on the timber supply is slight.

The empirical data are based on a sample of 314 holdings collected by interviewing forest owners in 1980–86. In 1990–91 the same holdings were resurveyed by means of a postal inquiry and partly by interviewing the forest owners. The principal objective was to collect data to assist in quantifying ownership factors that influence partitioning among different kinds of NIPF holdings. Thus, the mechanism of partitioning was described and a maximum likelihood logistic regression model was constructed using seven independent holding and ownership variables.

One out of four holdings had undergone partitioning in conjunction with a change in ownership, one fifth among family owned holdings and nearly a half among jointly owned holdings. The results of the logistic regression model indicate, for instance, that the odds on partitioning is about three times greater for jointly owned holdings than for family owned ones. Also, the probabilities of partitioning were estimated and the impact of independent dichotomous variables on the probability of partitioning ranged between 0.02 and 0.01. The low value of Hosmer-Lemeshow test statistics indicates a good fit of the model, and the rate of correct classification was estimated to be 88% with a cut-off point of 0.5.

The average size of holdings undergoing ownership changes decreased from 29.9 ha to 28.7 ha over the approximate interval 1983–90. In addition, the transition probability matrix showed that the trends towards smaller size categories mostly concerned the small size categories. The results can be used in considering the effects of the small size holdings for forestry and if the purpose is to influence partitioning through forest or rural policy.

  • Ripatti, ORCID ID:E-mail:
article id 7505, category Article
Rauno Väisänen, Kari Heliövaara. (1994). Assessment of insect occurrence in boreal forests based on satellite imagery and field measurements. Acta Forestalia Fennica no. 243 article id 7505. https://doi.org/10.14214/aff.7505

The presence/absence data of 27 forest insect taxa (Retinia resinella, Formica spp., Pissodes spp., several scolytids) and recorded environmental variation were used to investigate the applicability of modelling insect occurrence based on satellite imagery. The sampling was based on 1,800 sample plots (25 m by 25 m) placed along the sides of 30 equilateral triangles (side 1 km) in a fragmented forest area (approximately 100 km2) in Evo, Southern Finland. The triangles were overlaid on land use maps interpreted from satellite images (Landsat TM 30 m multispectral scanner imagery 1991) and digitized geological maps. Insect occurrence was explained using either environmental variables measured in the field or those interpreted from the land use and geological maps. The fit of logistic regression models carried between species, possibly because some species may be associated with characteristics of single trees while other species with stand characteristics. The occurrence of certain insect species at least, especially those associated with Scots pine, could be relatively accurately assessed indirectly on the basis of satellite imagery and geological maps. Models based on both remotely sensed and geological data better predicted the distribution of forest insects except in the case of Xylechinus pilosus, Dryocetes sp. and Trypodendron lineatum, where the differences were relatively small in favour of the models based on field measurements. The number of species was related to habitat compartment size and distance from the habitat edge calculated from the land use maps, but logistic regressions suggested that other environmental variables in general masked the effect of these variables in species occurrence at the present scale.

  • Väisänen, ORCID ID:E-mail:
  • Heliövaara, ORCID ID:E-mail:
article id 7684, category Article
Pekka Mäkinen. (1993). Puutavaran kuljetusyritysten menestymisen strategiat. Acta Forestalia Fennica no. 238 article id 7684. https://doi.org/10.14214/aff.7684
English title: Strategies used by timber truck companies to ensure business success.

The aim of the study was to determine how timber truck transport business succeeds in the competition within its sector, and the effect it has on profitability structure of the sector. Furthermore, strategic groups were looked at in depth, as well as the competitive strategies of the most successful companies and groups of companies. The theoretical competitive strategy was operationalized.

A total of 53 timber truck transport entrepreneurs were interviewed. The average age of the entrepreneurs was 51 years. Of the businesses, 35% were partnership companies, 6% open companies, and 59% self-employed. The business owned an average 1.5 trucks, and at the time of interviewing their average age was four years. Nearly nine out of ten entrepreneurs had no schooling for the line of business, and four out of five had no short-term training. The attitude of the timber truckers toward their activities was more like that of self-employed persons than that of entrepreneurs. A total of 61.5% of them reporter that they carried on entrepreneurship simply to assure themselves a job.

The operational profitability of the sector has been good in the years 1984 to 1990, and the business profitability fairly good. The median equity ratio in the sector has remained at about 20% and the ratio of debts to turnover about 40%. The sector has been more profitable than forest machine contracting primarily due to the barriers to entry into the sector.

Cluster analysis, using Ward’s method, was used for seeking out strategic groups. The lengths of the customer relationships proved a significant barrier to mobility. The most successful business used the competitive strategy of cost weighted focussing. This was done through optimization of the capacity utilization rate and through choice of correct customers. The strategic position for successful business was judged to be good in the future. Success in the future will require above all activeness and innovation ability.

The PDF includes a summary in English.

  • Mäkinen, ORCID ID:E-mail:
article id 7675, category Article
Erkki Tomppo. (1992). Satellite image aided forest site fertility estimation for forest income taxation. Acta Forestalia Fennica no. 229 article id 7675. https://doi.org/10.14214/aff.7675

Two operative forest site class estimation methods utilizing satellite images have been developed for forest income taxation purposes. For this, two pixelwise classification methods and two post-processing methods for estimating forest site fertility are compared using different input data. The pixelwise methods are discriminant analysis, based on generalized squared distances, and logistic regression analysis. The results of pixelwise classifications are improved either with mode filtering within forest stands or assuming a Markov random field type dependence between pixels. The stand delineation is obtained by using ordinary segmentation techniques. Optionally, known stand boundaries given by the interpreter can be applied. The spectral values of images are corrected using a digital elevation model of the terrain. Some textural features are preliminary tested in classification. All methods are justified by using independent test data.

A test of the practical methods was carried out and a cost-benefit analysis computed. The estimated cost saving in site quality classification varies from 14% to 35% depending on the distribution of the site classes of the area. This means a saving of about 2.0–4.5 million FMK per year in site fertility classification for income taxation purposes. The cost savings would rise even to 60% if that version of the method were chosen where field checking is totally omitted. The classification accuracy at the forest holding level would still be similar to that of traditional method.

The PDF includes a summary in Finnish.

  • Tomppo, ORCID ID:E-mail:
article id 7606, category Article
Kari Heliövaara, Rauno Väisänen, Auli Immonen. (1991). Quantitative biogeography of the bark beetles (Coleoptera, Scolytidae) in northern Europe. Acta Forestalia Fennica no. 219 article id 7606. https://doi.org/10.14214/aff.7606

Biogeographical patterns of the Scolytidae in Fennoscandia and Denmark, based on species incidence data from the approximately 70 km x 70 km quadrats (n = 221) used by Lekander et al. (1977), were classified to environmental variables using multivariate methods (two-way indicator species analysis, detrended correspondence analysis, canonical correspondence analysis).

The distributional patterns of scolytid species composition showed similar features to earlier presented zonations based on vegetation composition. One major difference, however, was that the region was more clearly divided in an east-west direction. Temperature variables associated with the location of the quadrat had the highest canonical coefficient values on the first axis of the CCA. Although these variables were the most important determinants of the biogeographical variation in the beetle species assemblages, annual precipitation and the distribution of Picea abies also improved the fit of the species data.

Samples with the most deviant rarity and typicality indices for the scolytid species assempblages in each quadrat were concentrated in several southern Scandinavian quadrats, in some quadrats in northern Sweden, and especially on the Swedish islands (Öland, Gotland, Gotska Sandön) in the Baltic Sea. The use of rarity indices which do not take the number of species per quadrat, also resulted high values for areas near Stockholm and Helsinki with well-known faunas. Methodological tests in which the real changes in the distribution of Ips acuminatus and I. amitinus were used as indicators showed that the currently available multivariate methods are sensitive to small faunal shifts even, and thus permit analysis of the fauna in relation to environmental changes. However, this requires more detailed monitoring of the species’ distributions over longer time spans.

Distribution of seven species (Scolytus intricatus, S. laevis, Hylurgops glabratus, Crypturgus cinereus, Pityogenes salasi, Ips typographus, and Cyleborus dispar) were predicted by logistic regression models using climatic variables. In spite of the deficiencies in the data and the environmental variables selected, the models were relatively good for several but not for all species. The potential effects of climate change on bark beetles are discussed.

The PDF includes a summary in Finnish.

  • Heliövaara, ORCID ID:E-mail:
  • Väisänen, ORCID ID:E-mail:
  • Immonen, ORCID ID:E-mail:
article id 4729, category Article
Puutavaranmittauskomitea. (1966). Puutavaranmittauskomitean mietintö : Osamietintö I. Silva Fennica no. 118 article id 4729. https://doi.org/10.14214/sf.a14287
English title: Report of timber scaling committee.

A Timber Scaling Committee was appointed by the Government of Finland in 1959, commissioned with the regulations concerning the scaling of timber and to draw a proposal for their amendments. The commission suggest revision of the regulations in their entire extent. The largest alterations should be made in the act which incorporates the provisions concerning the actual technical methods of procedure in measuring. Thus, also amendments were also posed for the Timber Scaling Law and the law concerning the scaling of timber for the purpose of paying wages.

The inclusion of the setting of the grades and quantities are considered important, since most of the disagreements occurring in measuring are concerned with quality of the timber. Inside of the sphere of application of the law would also be settling of the problems of the quality, and the measuring procedure, also when measuring for the purpose of paying wages.

According to the bill, the necessary number of official scalers and scaling boards would be appointed. The duties of the present officers would be changed. In the boards would be presented sellers, buyers, employers and employees besides the chairman. The freedom of contract in the scaling of timber will be preserved from the present law.

The report includes a bill for the Timber scaling Act, a draft for the timber scaling act, and a draft for an act which includes the timber scaling rules.

The PDF includes a summary in English.

  • Puutavaranmittauskomitea, ORCID ID:E-mail:
article id 4685, category Article
Metsänhoitoyhdistyslain tarkistamiskomitea. (1959). Metsänhoitoyhdistyslain tarkistamiskomitean mietintö. Silva Fennica no. 98 article id 4685. https://doi.org/10.14214/sf.a9126
English title: Report of the committee set out to revise the Law on Forest Management Associations.

The Law on Forest Management Associations was passed in 1950. According to the law, forest owners have to pay a forestry fee, which is used to finance local forest management associatons. The effect of the law on Finnish private forestry is considered to be significant.
The number of consulting forest officers has increased by 95% and the labour input by 107% since the law came into effect. Thus, the guidance available for forest owners has increased markedly. 85% of timber cut from private forests are marked by professional foresters, while the share was earlier less than 30%. The amount of forest management work, such as clearing of felling sites, sowing and care of plantations, has also increased.
On the other hand, experience has pointed out a need for revising some points of the law. To this aim, the Government of Finland appointed a committee to outline the ammendments. The present article contains the report of the committee.
The committee suggests that the forestry fee, that according to the present law is 2-6% of the net yield computed for communal income tax, will be changed to 2-5%. Further, forest holding in which the annual increment is less than 20 cu.m. are at the moment exempt from the fee. It is suggested that holdings with an annual increment of less than 30 cu.m. pay half a fee. In addition, the committee suggests some clarifying provisions to be adopted.

The article includes a summary in English.

  • Metsänhoitoyhdistyslain tarkistamiskomitea, ORCID ID:E-mail:
article id 4649, category Article
E. A. Jamalainen. (1955). Männyn karisteen torjunta kemiallisilla aineilla Leksvallin taimitarhassa. Silva Fennica no. 88 article id 4649. https://doi.org/10.14214/sf.a9110
English title: The control of needle cast of Scots pine with chemicals at the Leksvall nursery.

In 1953 and 1954 needle cast (Peridermium pinastri (Shrad.) Chev., now Lophodermium) caused much damage at the Leksvall nursery at Tammisaari as well as at some other nurseries in Southern Finland.

Experiments were conducted at the Leksvall nursery with different fungicides. The results showed that with spraying done every second week during the whole growing season beginning on May 20th and ending on 27th September in 1954, the damage caused by needle cast was entirely controlled with 2% Bordeaux mixture and the zineb preparation (Dithane Z-78); nabam preparation (Dithane D-14) being somewhat less effective. Lime sulphur, Burgundy mixture, thiram preparation, captan preparation, and PCNB preparation were rather ineffective, in addition, of these the lime sulphur and the Burgundy mixture caused damage to the needles. Phenylmercury preparation proved useless.

The article includes an abstract in English.

  • Jamalainen, ORCID ID:E-mail:
article id 4641, category Article
Metsänhoitolakikomitea. (1953). Metsänhoitolakikomitean mietintö. Silva Fennica no. 83 article id 4641. https://doi.org/10.14214/sf.a9104
English title: Report of the Forest Management Law Committee.

A Committee was appointed in 1946 by the government of Finland to draw a draft to substitute the 1928 Law on Private Forests. The article is a report of the committee, and gives a suggestion to a new Forest Management Law and Forest Management Decree.

The aim of the 1928 law was to prevent devastating fellings. The committee introduces a new concept, duty to tend forests in accord with the principle of progressive forestry. This principle is drafted in the first paragraph of the law: Forest should be so tended, protected and used that, as far as possible, the productive capacity of the soil will be fully utilized and economically profitable, and increasing yield secured.

The proposal also includes measures to prevent devastation, the concept of which has been changed from the previous law. For instance, a cutting which is in disproportion to the growing stock of the forestry holding is considered devastation. Responsibility for the measures to secure regeneration after felling rests with the forest owner if the felling has been carried out in line with sound silvicultural practice. The district forestry boards are suggested to be the organizations that supervise the observance of the law.

The article includes a summary in English.

  • Metsänhoitolakikomitea, ORCID ID:E-mail:
article id 4621, category Article
Metsähallintakomitea. (1951). Metsähallintoa koskevat säännökset : metsähallintokomitean mietintö. Silva Fennica no. 71 article id 4621. https://doi.org/10.14214/sf.a9093
English title: Statutes of Forest Service.

The government of Finland appointed in 1949 a committee to compose new legislation for Forest Service. The article includes proposals for a Forest and Park Service Act and a Forest and Park Service Decree. The proposals are based on the previous decree on forest administration. The committee proposes changes in the sections of Forest Service. The management of peatlands and forests of the state will be in a same section, and all issues concerning the private forests in one section. State forests would be divided in three districts instead of the present four districts.

The committee will make a separate report on necessary reforms in the administration of Forest Service to ensure that the state forests of Finland will be managed effectively.

  • Metsähallintakomitea, ORCID ID:E-mail:
article id 4594, category Article
Kustaa Kallio. (1948). Maanhankintalaki ja sen metsäkysymykset. Silva Fennica no. 64 article id 4594. https://doi.org/10.14214/sf.a13996
English title: Forest related issues of land acquisition act.

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica.

This presentation describes execution of land acquisition act that came into effect in 1945. The act gave principles of transfer of state forest land for settlement.

  • Kallio, ORCID ID:E-mail:
article id 4593, category Article
Toivo J. Komsi. (1948). Työväen huoltoa koskevasta lainsäädännöstä. Silva Fennica no. 64 article id 4593. https://doi.org/10.14214/sf.a13995
English title: Application of labour legislation in forest work.

 

Silva Fennica Issue 64 includes presentations held in 1947 in the third professional development courses, arranged for foresters working in the public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. Two of the presentations were published in other publications than Silva Fennica.

This presentation describes application of labour legislation and occupational safety act in forest work.

  • Komsi, ORCID ID:E-mail:
article id 4577, category Article
Metsäverotuksen uudistamiskomitea. (1942). Metsäverotuksen uudistamissuunnitelma. Silva Fennica no. 57 article id 4577. https://doi.org/10.14214/sf.a9081
English title: Reform of forest taxation.

A committee was appointed in 1940 to prepare a proposal for reform of forest taxation. The taxation based on net income of forestry was considered to have limitations, and the actual net income had been observed to be markedly higher than the income that was used in taxation.

The report describes in detail the principles and shortcomings of taxation used since 1922. These include inaccuracies in the forest areas of a woodland estate, and weaknesses in classification of forest land and demand zones. The committee suggests several improvements in calculating the taxable income, which in the new calculations is based on yield on terms of value.

The article includes an abstract in German.

  • Metsäverotuksen uudistamiskomitea, ORCID ID:E-mail:
article id 4561, category Article
Toivo J. Komsi. (1939). Oikeudesta toisen omaan. Silva Fennica no. 52 article id 4561. https://doi.org/10.14214/sf.a13968
English title: The use property without property rights.

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation discusses legal aspects of cases when property has been used without property rights. Examples related to forestry, hunting, fishing and reindeer husbandry are presented.

  • Komsi, ORCID ID:E-mail:
article id 4572, category Article
Arvo Lähde. (1940). Metsä- ja uittotyöläisten asunto- ja ravinto-oloista. Silva Fennica no. 51 article id 4572. https://doi.org/10.14214/sf.a13954
English title: Housing and nourishment of forest workers and log floaters.

Due to constantly changing working sites often in remote places the working conditions of forest workers and log floaters have been inadequate. The article discusses the requirements of the act on the housing of forest workers and log floaters that came into force in 1928, and assesses how it affected the working conditions of the laborers. 

The employers had positive attitude towards the new legislation and they had improved the housing conditions to match the requirements. Most complaints in the inspections of the working conditions were found in Eastern Finland. The shortages were considered to be mostly minor ones. Even if the act concerned only housing, it improved indirectly also nourishment in the working sites. Other factors affecting the working conditions were shelters for the draught horses, health care, and newspapers and other spare-time activities available for the workers. 

The article includes a German summary. 

  • Lähde, ORCID ID:E-mail:
article id 4541, category Article
Toivo J. Komsi. (1938). Rikoslaki ja metsä. Silva Fennica no. 46 article id 4541. https://doi.org/10.14214/sf.a13950
English title: Criminal law and forests.

Silva Fennica issue 46 includes presentations held in professional development courses, arranged for foresters working in public administration in 1937. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service. 

This presentation describes how criminal law affects the use of forests.

  • Komsi, ORCID ID:E-mail:
article id 4545, category Article
Metsänhoidon edistämiskomitea. (1938). Yksityismetsätalouden edistäminen. Silva Fennica no. 45 article id 4545. https://doi.org/10.14214/sf.a9070
English title: Promotion of private forestry in Finland.

The government of Finland appointed a commission to study how the work of forest owners’ associations could be promoted. In 1936 there was 232 forest owners’ associations in Finland. They had 20,632 members, who owned 1,841,304 hectares of forests. The owners of large forest holdings were overpresented among the members. The associations together with forestry boards were important actors in increasing the productivity of the private forests.

The commission concluded that rational forest management should be extended to all private forests, which could be best achieved through the forest owners’ associations. It suggested that the membership should remain voluntary, and that the financing of the associations would be arranged by self-taxation of the forest owners. The so called forest management tax should be devoted to the local forest owners’ associations. Also the state should continue to support the associations. Both state and the smallest forest holdings would be released from the forest management tax. The companies, estates and other large forest owners that employ their own forest management staff would pay a quarter of the tax. The tax could be based on the area of the forest, income of the timber sold or a combination of these. The commission suggested a forest management law, which would deal with the forest management tax and the forest owners’ associations.
The PDF includes a summary in Swedish and English.

  • Metsänhoidon edistämiskomitea, ORCID ID:E-mail:
article id 4507, category Article
Mauno Pekkala. (1937). Uuden asutuslainsäädännön ja erittäinkin valtion metsämaiden asuttamista koskevien säännöksien pääkohdat. Silva Fennica no. 42 article id 4507. https://doi.org/10.14214/sf.a14085
English title: Main points of the new legislation concerning settlement policy and land settlement in state forests.

Silva Fennica issue 42 includes presentations held in professional development courses, arranged for foresters working in public administration in 1936. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service

This presentation describes legislation concerning settlement policy in the state lands.

  • Pekkala, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive