Current issue: 53(2)

Under compilation: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'brush saw'.

Category: Research note

article id 379, category Research note
Daniel Ligné, Lars Eliasson, Tomas Nordfjell. (2005). Time consumption and damage to the remaining stock in mechanised and motor manual pre-commercial thinning. Silva Fennica vol. 39 no. 3 article id 379. https://doi.org/10.14214/sf.379
Selective pre-commercial thinning (PCT) is usually carried out by workers with a brush saw in order to increase the growth of the potential crop trees (main stems) through removal of competing trees. In the last decade relative PCT costs have increased, partly because stands are denser and have higher trees when treated, which has led to new interest for mechanised PCT. The objective was to compare mechanised and motor manual PCT regarding productivity and damage to remaining main stems. Time consumption for, and damage after, mechanised and motor manual PCT were studied on 50 plots per treatment in mixed pine birch stands with an initial stand density exceeding 4500 stems ha–1. In the present study productivity was influenced by stand density, stand height and the quota between height and diameter. Irrespectively of these factors, mechanised PCT was 0.74 hours ha–1 slower than motor manual PCT. Motor manual PCT of the average stand (average height 3.69 m, 10 816 stems ha–1) took 5.06 effective hours. In average 2475 and 2805 main stems ha–1 were left after the mechanised and motor manual treatments, respectively, whereof 1.3 and 2.1% were damaged by the treatments. The results show that efficiency in motor manual PCT has increased in dense and tall stands compared to older studies. Motor manual PCT was more time effective than mechanised PCT, and thereby also even more cost-effective. However, the potential for technical and methodological development of mechanised PCT is probably larger than for motor manual PCT.
  • Ligné, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden ORCID ID:E-mail:
  • Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden ORCID ID:E-mail: lars.eliasson@norraskogsagarna.se (email)
  • Nordfjell, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden ORCID ID:E-mail:

Category: Article

article id 5164, category Article
Juhani Kangas, Tapio Klen. (1982). Raivaussahan kantokäsittelylaitteen käyttäjän altistuminen torjunta-aineille. Silva Fennica vol. 16 no. 3 article id 5164. https://doi.org/10.14214/sf.a15079
English title: Exposure of forest workers to herbicides.

The purpose of this study was to measure workers’ exposure to MCPA and glyphosate when sprayers connected to the brush saws was used. A non-pressurized sprayer with a pump and a pressurized sprayer where dosage was regulated with manual control were studied. Exposure was measured from the breathing zone and urine samples.

MCPA collected from the breathing zone gathered into alcohol was 0.05 mg/m3 for the pressurized sprayer, 0.02 mg/m3 for the non-pressurized sprayer, and 0.04 mg/m3 (average) for both types of sprayers together.

MCPA in the breathing zone, collected from splashes and fog into a glass fibre filter, was 0.18 mg/m3 for the pressurized sprayer, 0.09 mg/m3 for the non-pressurized sprayer, and 0.12 mg/m3 for both sprayers used together. Glyphosate in the breathing zone, collected into sodium hydroxide was below 0.05 mg/m3.

In five urine samples taken after the work day there was on the average 0.4 mg/l MCPA, while in 21 samples the MCPA contents were under the definition limit (0.2 mg/l).

The PDF includes a summary in Finnish.

  • Kangas, ORCID ID:E-mail:
  • Klen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive