Current issue: 55(3)

Under compilation: 55(4)

Scopus CiteScore 2019: 3.1
Scopus ranking of open access forestry journals: 6th
PlanS compliant
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'bundling'.

Category: Research article

article id 454, category Research article
Paula Jylhä, Olli Dahl, Juha Laitila, Kalle Kärhä. (2010). The effect of supply system on the wood paying capability of a kraft pulp mill using Scots pine harvested from first thinnings. Silva Fennica vol. 44 no. 4 article id 454. https://doi.org/10.14214/sf.454
The efficiencies of wood supply systems based on cut-to-length (CTL) harvesting, the harvesting of loose whole trees, and whole-tree bundling were compared using the relative wood paying capabilities (WPC) of a kraft pulp mill as decisive criteria. The WPCs from mill to stump were calculated for three first-thinning stands of Scots pine (Pinus sylvestris L.) with mean breast-height diameter of the removal of 6, 8, and 12 cm. Pulp price had a strong effect on the WPC, and the CTL system resulted in the highest WPC per m3 at stump. The savings in procurement costs and gains in energy generation from additional raw material acquired with the harvesting of loose whole trees did not compensate the losses in pulp production. Considering removal per hectare, loose whole trees gave the highest WPCs at stump in the two stands with the smallest trees and the highest proportion of additional raw material. Decrease in pulp price and increase in energy price improved the competitiveness of the whole-tree systems. In the case of whole-tree bundling, savings in transportation costs did not balance the high cutting and compaction costs, and the bundling system was the least competitive alternative.
  • Jylhä, Finnish Forest Research Institute, Kannus, Finland ORCID ID:E-mail: paula.jylha@metla.fi (email)
  • Dahl, Aalto University School of Science and Technology, Department of Forest Products Technology, Espoo, Finland ORCID ID:E-mail:
  • Laitila, Finnish Forest Research Institute, Joensuu, Finland ORCID ID:E-mail:
  • Kärhä, Metsäteho Oy, Helsinki, Finland ORCID ID:E-mail:

Category: Research note

article id 470, category Research note
Paula Jylhä, Juha Laitila. (2007). Energy wood and pulpwood harvesting from young stands using a prototype whole-tree bundler. Silva Fennica vol. 41 no. 4 article id 470. https://doi.org/10.14214/sf.470
The productivity of cutting and bundling whole trees using the first prototype of a bundle-harvester comprised of a harwarder as the base machine, an accumulating felling head, and a compacting device was studied in three young stands in order to facilitate the further development of the concept. In addition, the removal and its composition were studied as a means of laying the foundations for developing methods for work rating and measurement on delivery. Bundling enables in-depth integration of pulpwood and energy wood procurement. Both energy wood (crown biomass) and pulpwood can be incorporated into the same bundles, and the subsequent separation of these fractions takes place at the debarking phase at the pulpmill. Bundle-harvesting productivities were relatively low (2.8–3.7 m3/E0-h) when compared to current harvesting technology. Improving working techniques, machine structure, and components showed great potential for increasing the efficiency of the concept. The bundles were dimensionally uniform. Their solid volume varied between 0.350 m3 and 0.513 m3, depending on the bundle assortment and stand properties. Integrating energy wood harvesting with pulpwood harvesting increased removal even by 59 per cent.
  • Jylhä, Finnish Forest Research Institute, Kannus Research Unit, P.O. Box 44, FI-69101 Kannus, Finland ORCID ID:E-mail: paula.jylha@metla.fi (email)
  • Laitila, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland ORCID ID:E-mail:

Category: Article

article id 4677, category Article
Yrjö Roitto. (1958). Pölkyn koon vaikutus niputustulokseen ja sen huomioon ottaminen taksassa. Silva Fennica no. 96 article id 4677. https://doi.org/10.14214/sf.a9123
English title: Effect of log size on the bundling result and how it is taken into account in bundling wage payments.

In Finland, the wage norms of forest wages have been defined by the government since 1935. However, no official tariffs have been drawn for mechanical bundling in water for floating in bundles. The aim of the investigation was to find out the correlation between the bundling result and the size of logs to be bundled, and how it affects the differences observed in earnings between the different types of devices used in the work. The aim is a more equal bundling tariff in cases where the log size is not the variable. The investigation was based mainly on diaries of bunders of Enso-Gutzeit Oy.

A tariff was formulated based on the results of the investigation. A unit tariff was obtained for bundling of timber differing in size by dividing the earnings of bundling an average timber by the unit number of logs differing in size from the average and bundled in a corresponding period. The tariff was not able to produce even earnings on all bunching machines, but a tariff that takes account log size may be recommended when the aim is an equal wage payment.

The article includes a summary in English.

  • Roitto, ORCID ID:E-mail:
article id 4677, category Article
Yrjö Roitto. (1958). Pölkyn koon vaikutus niputustulokseen ja sen huomioon ottaminen taksassa. Silva Fennica no. 96 article id 4677. https://doi.org/10.14214/sf.a9123
English title: Effect of log size on the bundling result and how it is taken into account in bundling wage payments.

In Finland, the wage norms of forest wages have been defined by the government since 1935. However, no official tariffs have been drawn for mechanical bundling in water for floating in bundles. The aim of the investigation was to find out the correlation between the bundling result and the size of logs to be bundled, and how it affects the differences observed in earnings between the different types of devices used in the work. The aim is a more equal bundling tariff in cases where the log size is not the variable. The investigation was based mainly on diaries of bunders of Enso-Gutzeit Oy.

A tariff was formulated based on the results of the investigation. A unit tariff was obtained for bundling of timber differing in size by dividing the earnings of bundling an average timber by the unit number of logs differing in size from the average and bundled in a corresponding period. The tariff was not able to produce even earnings on all bunching machines, but a tariff that takes account log size may be recommended when the aim is an equal wage payment.

The article includes a summary in English.

  • Roitto, ORCID ID:E-mail:
article id 4677, category Article
Yrjö Roitto. (1958). Pölkyn koon vaikutus niputustulokseen ja sen huomioon ottaminen taksassa. Silva Fennica no. 96 article id 4677. https://doi.org/10.14214/sf.a9123
English title: Effect of log size on the bundling result and how it is taken into account in bundling wage payments.

In Finland, the wage norms of forest wages have been defined by the government since 1935. However, no official tariffs have been drawn for mechanical bundling in water for floating in bundles. The aim of the investigation was to find out the correlation between the bundling result and the size of logs to be bundled, and how it affects the differences observed in earnings between the different types of devices used in the work. The aim is a more equal bundling tariff in cases where the log size is not the variable. The investigation was based mainly on diaries of bunders of Enso-Gutzeit Oy.

A tariff was formulated based on the results of the investigation. A unit tariff was obtained for bundling of timber differing in size by dividing the earnings of bundling an average timber by the unit number of logs differing in size from the average and bundled in a corresponding period. The tariff was not able to produce even earnings on all bunching machines, but a tariff that takes account log size may be recommended when the aim is an equal wage payment.

The article includes a summary in English.

  • Roitto, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive