Current issue: 55(3)

Under compilation: 55(4)

Scopus CiteScore 2019: 3.1
Scopus ranking of open access forestry journals: 6th
PlanS compliant
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'dimensional stability'.

Category: Research article

article id 257, category Research article
Nadir Ayrilmis. (2008). Effect of compression wood on dimensional stability of medium density fiberboard. Silva Fennica vol. 42 no. 2 article id 257. https://doi.org/10.14214/sf.257
This study evaluated the effect of compression wood on dimensional stability of medium density fiberboards (MDF) manufactured from fiber furnishes of pine (Pinus nigra Arnold var. pallasiana) containing compression wood. Two panel types were manufactured from two different compression wood (CW) portion / normal wood (NW) portions in the furnish, 75/25 and 10/90, respectively. Linear and thickness variations of the panels exposed to various relative humidites at 20 °C, linear expansion/contraction and thickness swelling/shrinkage, were measured according to the procedures defined by DIN EN 318 (2005) standard test method. Panels made from fiber furnish containing 75% the CW had higher linear expansion and linear contraction values with an average value of 0.286% and 0.247% than those of panels made from fiber furnish containing 10% the CW with an average value of 0.184% and 0.152%, respectively. As for thickness swelling and thickness shrinkage properties, panels made from fiber furnish containing 75% the CW had the thickness swelling and thickness shrinkage values with an average of 5.042% and 4.402% while panels made from fiber furnish containing 10% the CW had the values with 3.621% and 2.861%, respectively. Consequently, based on the findings obtained from this study, expansion and swelling properties of the MDF panels were negatively affected by compression wood increase.
  • Ayrilmis, University of Istanbul, Faculty of Forestry, Department of Wood Mechanics and Technology, Bahcekoy, TR-34473 Istanbul, Turkey ORCID ID:E-mail: nadiray@istanbul.edu.tr (email)
article id 278, category Research article
Katri Luostarinen. (2007). The effect of annual ring orientation and drying method on deformations, casehardening and colour of silver birch (Betula pendula) boards. Silva Fennica vol. 41 no. 4 article id 278. https://doi.org/10.14214/sf.278
Deformations of timber, caused mainly by anisotropic shrinkage, can be partially directed by controlling annual ring orientation through different sawing patterns. Ring orientation also affects the movement of water from within the board to its surface, with rapidity of drying having implications for the wood colour. Here sawn silver birch (Betula pendula Roth) timber was classed into two groups according to ring orientation. Two drying methods were used. The final moisture content was lower and the colour lighter in dried boards with radial than with tangential flats, but deformations were larger in radial than in tangential boards. Both drying and ring orientation affected the final moisture content and moisture gradient of the boards. Very small differences in board sizes or shape had an effect on both colour and deformations. The results support the need for accurate sawing and for classing silver birch timber sawn into parquet billets according to ring orientation in order to optimise the drying quality.
  • Luostarinen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland ORCID ID:E-mail: katri.luostarinen@joensuu.fi (email)

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive