Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'equipment'.

Category: Article

article id 7202, category Article
I. Lassila. (1926). Piirteitä sahan ja saharaamin alkukehityksestä. Acta Forestalia Fennica vol. 31 no. 3 article id 7202. https://doi.org/10.14214/aff.7202
English title: Features in the early development of saws and saw frames.
Original keywords: saha; saharaami; sahalaitteisto; kehäsaha

The article describes the evolution of sawmills, focusing on four parts: the frame and sliding devices, the fastening of the blade into the frame, appliances for fastening the timber, and feeding devices. The earlier equipment had adaptability that has been lost in the more developed equipment, because the raw materials have been too expensive and hard to acquire, among other things. It is remarked that many inventions of the sawmills have not been adopted in the actual equipment.

The PDF includes a summary in English.

  • Lassila, ORCID ID:E-mail:
article id 7202, category Article
I. Lassila. (1926). Piirteitä sahan ja saharaamin alkukehityksestä. Acta Forestalia Fennica vol. 31 no. 3 article id 7202. https://doi.org/10.14214/aff.7202
English title: Features in the early development of saws and saw frames.
Original keywords: saha; saharaami; sahalaitteisto; kehäsaha

The article describes the evolution of sawmills, focusing on four parts: the frame and sliding devices, the fastening of the blade into the frame, appliances for fastening the timber, and feeding devices. The earlier equipment had adaptability that has been lost in the more developed equipment, because the raw materials have been too expensive and hard to acquire, among other things. It is remarked that many inventions of the sawmills have not been adopted in the actual equipment.

The PDF includes a summary in English.

  • Lassila, ORCID ID:E-mail:
article id 5240, category Article
Pertti Harstela, Kimmo Piirainen. (1985). Effect of whole-body vibration and driving a forest machine simulator on some physiological variables of the operator. Silva Fennica vol. 19 no. 2 article id 5240. https://doi.org/10.14214/sf.a15419

The influence of horizontal whole-body vibration of fairly low intensity alone and combined with the mental load and motor action typical for the forest machine drive on heart rate variability (HRV), respiration rate (RR) and heart rate (HR) was studied by testing five subjects. Horizontal vibration had an influence on HR, HRV and RR. ’Control activities’ had the most influence on RR and HRV, but some influence on HR, too. ’Moving the control devices’ (motor action) gave the same response in HR as ’control activities’, but not in HRV and RR. ’Control activities’ together with ’vibration’ had a more effect on HRV and RR than these two factors singly, but not on HR. The possibilities of using these variables in field studies are discussed.

The PDF includes a summary in Finnish.

  • Harstela, ORCID ID:E-mail:
  • Piirainen, ORCID ID:E-mail:
article id 5130, category Article
Martti Saarilahti. (1981). Mikroaaltotutka jään paksuuden mittaukseen. Silva Fennica vol. 15 no. 4 article id 5130. https://doi.org/10.14214/sf.a15187
English title: Radar measurement of ice thickness on ice roads and landing.

Light and economic FM-CW radar has been developed for controlling the bearing capacity of ice roads and landings on ice used for timber transportation and storage of timber in Finland. It was tested on natural ice and ice roads of three lakes in Southern Finland and one location on sea on the southren coast of Finland (a total of 166 observations). Ice thickness varied from 0 to 100 cm. Correlation coefficient between auger and radar measured ice thickness was r=0.99 and absolute error varied from -10 to +7 cm. The quality of ice had no influence, but by improving the interpretation of results, also the quality factors might be detected.

The PDF includes a summary in Finnish.

  • Saarilahti, ORCID ID:E-mail:
article id 5127, category Article
Simo Kaila, Juhani Päivänen. (1981). Metsämaanmuokkauksen suoritemäärät ja konekalusto vuosina 1976-1979. Silva Fennica vol. 15 no. 3 article id 5127. https://doi.org/10.14214/sf.a15068
English title: Forest soil cultivation areas and machinery in 1976–1979 in Finland.

The areas of soil cultivation in regeneration sites using different methods in 1976–1979 and the cultivation units in use in Finland in 1979 were studied by means of a questionnaire. Application of soil cultivation methods appears to have become strongly polarized: in Southern Finland disc plowing with wheel tractors are used, whilst in Northern Finland wing plowing with crawler tractors is the most popular method, each being practically the only alternative in the respective area.

The PDF includes a summary in English.

  • Kaila, ORCID ID:E-mail:
  • Päivänen, ORCID ID:E-mail:
article id 4999, category Article
Tapio Klen, Veikko Louhevaara. (1978). Metsurin suojavarusteiden aiheuttama lisäkuormitus. Silva Fennica vol. 12 no. 3 article id 4999. https://doi.org/10.14214/sf.a14853
English title: The additional physical strain caused by safety equipment in logging work.

The safety clothing, rubber safety boots, belt with lifting hooks and personal protectors can weight about 3 kg more than the normal work clothing including rubber boots. In order to evaluate the increase off the physical strain in logging work due to them, laboratory tests performed on tread mill were made. The physical strain increased 3–11% as estimated from heart rate and 4–8% as estimated from oxygen consumption measurements.

The PDF includes a summary in English.

  • Klen, ORCID ID:E-mail:
  • Louhevaara, ORCID ID:E-mail:
article id 4818, category Article
Matti Kärkkäinen. (1970). Moottorisahojen valinnasta teknisten ominaisuuksien ja hinnan perusteella. Silva Fennica vol. 4 no. 2 article id 4818. https://doi.org/10.14214/sf.a14607
English title: The choice of power saws on the basis of the price and technical properties.

This investigation studies the effect of the retail price and the technical properties of preference ordering of buyers of power saw. According to the model derived, the preference ordering of power saws is due to technical properties xj. If no such restrictions in the function are supposed that could have bearing on the preferences of the buyers, there may be N ! possible combinations, when there are N power saws. If one can presume that each price corresponds with a technical level it is possible that each buyer has an optimum price of his own. The bigger the difference between the optimum and actual price, the less preferred the actual power saw is. In this case one may notice the amount of possible orderings is much less than that based on the model. Thus, the mode may be used.

In this paper some models are presented for cases when only n pieces of the population of N power saws are studied. 16 power saws of differing ages and technical levels were investigated. It was noted that many criteria of technical goodness were positively intercorrelated. The price correlated positively with every criterium used. According to the profile analysis, it was concluded that there were many development lines. For example, the idea of a light and the idea of an effective power saw.

According to the principal component analysis, it seemed obvious that there was little room for one- or two-dimensional preference ordering by the technical properties and price.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 4564, category Article
Sulo Järvinen. (1939). Metsähallinnon kalustokirjanpito ja kaluston hoito. Silva Fennica no. 52 article id 4564. https://doi.org/10.14214/sf.a13971
English title: Bookkeeping and maintenance of equipment in forest administration.

Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the principles of bookkeeping and maintenance of forestry equipment, which reform was in progress in 1938.

  • Järvinen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive