Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'laatu'.

Category: Article

article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7167, category Article
Veijo Heiskanen. (1966). Tutkimuksia rauduskoivikon karsimisen kannattavuudesta. Acta Forestalia Fennica vol. 81 no. 2 article id 7167. https://doi.org/10.14214/aff.7167
English title: Studies on the profitability of pruning of common birch (Betula pendula) stands.

The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.

The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.

Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.

The PDF includes a summary English.

  • Heiskanen, ORCID ID:E-mail:
article id 7165, category Article
Veijo Heiskanen. (1966). Tutkimuksia koivujen vikaisuuksista, niiden vaikutuksesta sorvaustulokseen sekä niiden huomioonottamisesta laatuluokituksessa. Acta Forestalia Fennica vol. 80 no. 3 article id 7165. https://doi.org/10.14214/aff.7165
English title: Studies on the defects of birch, their influence on the quality and quantity of rotary cut veneer, and their consideration in veneer birch grading.

The objective of this paper was to study the influence of defects of Betula pendula Roth and Betula pubescens Ehrh. on the quality, value and quantity of veneer cut produced by rotary cutting, to prepare grading rules for veneer birch and to determine the minimum quality for veneer birch, and to assess the quality and quantity of veneer yield in rotary cutting of bolts of different grades. Data for the study was collected in 1953-1963 from six plywood factories in Finland.

The effect of knot marks, knot bumps, dry and rotten knots, sound knots, sweep and crookedness, upright limbs, heart rot, open and overgrown scars and bark peeling defects in the bolt on the quality and yield of veneer is described. Recommendations for grading rules were defined on the basis of the result. The rules include three grades, for which certain defects are allowed. In the first grade are accepted bolts, which of the veneer yield included at least 30% of veneer of grades A and B when all jointing and end-clipped sheets were taken into account. In the second grade were accepted bolts, which of the main part of the veneer yield still is surface veneer on the basis of the wood quality. Of the third-grade bolts at least one third of the veneer yield ought to be surface veneer.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 7164, category Article
Veijo Heiskanen. (1965). Puiden paksuuden ja nuoruuden kehityksen sekä oksaisuuden ja sahapuulaadun välisistä suhteista männiköissä. Acta Forestalia Fennica vol. 80 no. 2 article id 7164. https://doi.org/10.14214/aff.7164
English title: Relation between the development of the early age and thickness of trees and their branchiness in Scots pine stands in Finland.

The objective of the study was to establish the influence of the founding density of a stand and the intensity of intermediate cutting on the quality of pine saw logs stems, primarily on their branchiness. Measurements were carried out in 68 Myrtillus-type and 32 Vaccinium-type Scots pine (Pinus sylvestris L.) stands. The quality of 1,982 sample trees was assessed.

According to the results, the branchless part of the stem is longest in the older age classes of trees. In all age classes the percentage of the branchless part is highest in medium sized stems. The relative height of the crown limit is greatest in small diameter classes and continues as the thickness of the tree increases. The crown is longer in the thicker tree. The grade of the butt log is on average highest in medium sized stems. Knottiness of a log made it unsuitable for a saw log only among the thickest stems. The relative share of the u/s grade decreased as the thickness of the trees increased.

From the point of view of early development of the trees it was concluded that in all age classes the branchless part is the shorter the faster the tree has grown in diameter when it was young. Also, branches of the butt log are the bigger the faster the tree has developed when it was young. The grade of the butt log improves as the thickness of the annual rings diminishes.

To produce good quality sawn timber, the pine stands should be established dense, and the first thinnings should be delayed as much as possible. The best time for the thinning would be when the diameter of the dominant trees at stump height is 12–15 cm and when all the branches have died on the length of the butt log. After the first thinning, comparatively intense intermediate thinning may be applied.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 7164, category Article
Veijo Heiskanen. (1965). Puiden paksuuden ja nuoruuden kehityksen sekä oksaisuuden ja sahapuulaadun välisistä suhteista männiköissä. Acta Forestalia Fennica vol. 80 no. 2 article id 7164. https://doi.org/10.14214/aff.7164
English title: Relation between the development of the early age and thickness of trees and their branchiness in Scots pine stands in Finland.

The objective of the study was to establish the influence of the founding density of a stand and the intensity of intermediate cutting on the quality of pine saw logs stems, primarily on their branchiness. Measurements were carried out in 68 Myrtillus-type and 32 Vaccinium-type Scots pine (Pinus sylvestris L.) stands. The quality of 1,982 sample trees was assessed.

According to the results, the branchless part of the stem is longest in the older age classes of trees. In all age classes the percentage of the branchless part is highest in medium sized stems. The relative height of the crown limit is greatest in small diameter classes and continues as the thickness of the tree increases. The crown is longer in the thicker tree. The grade of the butt log is on average highest in medium sized stems. Knottiness of a log made it unsuitable for a saw log only among the thickest stems. The relative share of the u/s grade decreased as the thickness of the trees increased.

From the point of view of early development of the trees it was concluded that in all age classes the branchless part is the shorter the faster the tree has grown in diameter when it was young. Also, branches of the butt log are the bigger the faster the tree has developed when it was young. The grade of the butt log improves as the thickness of the annual rings diminishes.

To produce good quality sawn timber, the pine stands should be established dense, and the first thinnings should be delayed as much as possible. The best time for the thinning would be when the diameter of the dominant trees at stump height is 12–15 cm and when all the branches have died on the length of the butt log. After the first thinning, comparatively intense intermediate thinning may be applied.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 7163, category Article
Jaakko Meriluoto. (1965). Raaka-ainetekijöiden vaikutus sorvatun koivuviilun määrään ja laatuun. Acta Forestalia Fennica vol. 80 no. 1 article id 7163. https://doi.org/10.14214/aff.7163
English title: The influence of raw material factors on the quantity and quality of rotary cut birch veneer.

The objective of the present investigation was to clarify the influence of raw material on the quantity, and especially quality of rotary cut birch veneer by running cutting tests with constant tool setting under factory conditions and with bolts of normal size. The quality of the veneer was mainly examined in laboratory.

The result showed that with an increase in bolt size the yield increases and reaches the maximal value in the diameter range of 251–275 mm and 226–250 mm for 60-inch and 50-inch bolt, respectively. With a decrease in bolt length the yield becomes higher. With the increase in the bolt size the quality of the veneer improves.

Defects in the shape of the bolt, such as crookedness, taper and oval form, decrease the yield. The good quality of the bolts affects most the yield of full-size sheets. Increase of knottiness decreases the yield by 4–5%. Lowering of the bolt temperature below 0 °C causes a sharp decline in the yield. Moisture content of the wood did not markedly affect the yield, but it improved the quality of the veneer. The minimum moisture content was 75%.

For the technical quality of the veneer, bolt temperature was the most decisive raw material factor. Also shape defects, of which crookedness was most serious, decreased the technical quality. Increase in summerwood percentage improved the quality.

The PDF includes a summary in English.

  • Meriluoto, ORCID ID:E-mail:
article id 7119, category Article
Paavo J. Ollinmaa. (1960). Eräistä ojitetuilla soilla kasvavan puun fysikaalisista ominaisuuksista. Acta Forestalia Fennica vol. 72 no. 2 article id 7119. https://doi.org/10.14214/aff.7119
English title: Physical properties of wood growing on drained peatlands.

The objective of the investigation was to determine the differences between faultless timber grown on a peatland before and after draining, in respect of compressive strength to the grain, volume weight, and shrinkage. In addition, the influence of the boundary zone between the close-ringed wood formed before draining and the wide-ringed wood produced after draining on strength of the timber was studied. The material consisted of 15 sample trees of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), white birch (Betula pubescens Ehrh.) and silver birch (B. Pendula Roth).

The volume weight of wood of the tree species in ascending order is; spruce, pine, white birch, silver birch. The volume weight of Scots pine seems to decrease from the butt end upwards, while no trend was revealed for spruce. In the coniferous trees, the wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior draining. No distinct trend was seen in the birch species. The volume weight of pine and spruce increased with decreasing width of the growth rings up to a certain limit, after which the conditions inverted.

The compressive strength of the different kinds of wood seems to increase from the butt end upwards, but after height of two meters it begins to decrease considerably. In birch, this point of inversion is in somewhat greater height. In spruce timber, the compressive strength parallel to the grain is lowest for wood which contains exclusively wide-ringed wood formed after draining. The boundary zone between the woods formed before and after draining is very distinguishable, but has no remarkable influence on the compressive strength parallel to the grain. Shrinkage of close-ringed wood is higher in all three principal directions than that of wide-ringed wood. This can be explained by the variations in volume weight and fibrillar orientation of the tracheid walls.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:
article id 7480, category Article
Seppo Ervasti. (1958). Suomesta myydyn havusahatavaran hintasuhteiden muutokset vuosina 1932-38 ja 1951-56. Acta Forestalia Fennica vol. 67 no. 6 article id 7480. https://doi.org/10.14214/aff.7480
English title: Changes in the price ratios of sawn softwood sold by Finland in 1932-38 and 1951-56.

The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.

Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.

In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.

The PDF includes a summary in English.

  • Ervasti, ORCID ID:E-mail:
article id 7407, category Article
Olli Vaartaja. (1951). Alikasvosasemasta vapautettujen männyn taimistojen toipumisesta ja merkityksestä metsänhoidossa. Acta Forestalia Fennica vol. 59 no. 3 article id 7407. https://doi.org/10.14214/aff.7407
English title: On the recovery of released Scots pine undergrowth and its silvicultural importance.

There are contrary opinions on the ability of Scots pine (Pinus sylvestris L.) seedlings to withstand oppression by hold-overs and recover after their felling. The recovery potential of oppressed pine stands in Southern and Northern Finland was studied using two kinds of material, fully recovered Scots pine stands and stands recently released. The volume and volume increment of the stand were measured, and the health of the sample trees was determined.

The study showed that those released pine stands that had been in oppressed state very long (25-60 years) had recovered after clear-cutting. After the release the stands grew at first slowly, but after recovery at about the same rate as natural normal stands of a similar height. The smaller, younger, and less stunted the seedlings were when they were released, and the better the site, the faster was the recovery. At the base of released pine stands various defects was detected. When the trees were released, the defects decrease their technical value. A heavy partial cutting had generally a disadvantageous effect on the stand. Recovering seedlings were found clearly to hinder the development of younger seedlings nearby. This inhibition seemed to be a result of the rapid spread of the root system of released pine trees.

The PDF includes a summary in English.

  • Vaartaja, ORCID ID:E-mail:
article id 7400, category Article
P. S. Tikka. (1949). Perä-Pohjolan koivikoiden laadusta. Acta Forestalia Fennica vol. 57 no. 4 article id 7400. https://doi.org/10.14214/aff.7400
English title: Quality of birch (Betula sp.) stands in the northernmost Finland.

The quality of birch (Betula sp.) stands in Perä-Pohjola in Northern Finland is low due to the harsh environment, unsuitable sites for the species and unsatisfactory silvicultural state. A total of 236 sample trees were felled and measured in 8 sample plots. The trees were over 80 years old.

Only third of the stand volume of birch in the stands had adequate quality for merchantable timber. This is due to birch growing often in sites unsuitable for the species, the low density of the stands, the small average size of stems, and the low amount of large sized trees. These problems may contribute to the fact that birch seem to be susceptible to decay. The trees have often grown from sprouts, which leads often to poor stem form and decay. The volume and quality of both pure and mixed birch stands was sufficient only in the most fertile sites. Also, decay was more common in poor sites.

The PDF includes a summary in German.

  • Tikka, ORCID ID:E-mail:
article id 7389, category Article
P. S. Tikka. (1947). Perä-Pohjolan kuusikoiden laadusta. Acta Forestalia Fennica vol. 55 no. 1 article id 7389. https://doi.org/10.14214/aff.7389
English title: Quality of Norway spruce stands in Peräpohjola in Northern Finland.

The different kinds of injuries in Norway spruce (Picea abies (L.) Karst.) stands was studied in 52 sample plots in Peräpohjola in the northernmost Finland. The age classes of the stands varied from 100 years to over 220 years. Most of the stands were unevenaged, as is usual in the area.

In the younger age classes (121-160 years) majority of the trees were of normal quality or had smaller injuries in all forest types. In age classes over 160 years the trees of merchantable quality decreased markedly in all forest types. The quality of the trees decreases with the age especially because of butt rot, braking of trees and crooks, forks and heart and top decay caused by the injuries. To ensure future quality it would be important that the stand is healthy from the beginning. When old spruce stands of the area are in large extent diseased by the root rot, it is questionable if they can be regenerated using natural regeneration. The spruce stands of the area are also relatively branchy. This could be prevented by growing the young stands dense. Changing the dominant tree species to Scots pine (Pinus sylvestris L.) in the dry upland forest sites could be a way to improve the quality of the forests in the area.

The PDF includes a summary in German.

  • Tikka, ORCID ID:E-mail:
article id 7317, category Article
Erkki Laitakari. (1935). Tutkimuksia metsikön ja kasvupaikan vaikutuksesta kuusen rungon kelpoisuuteen. Acta Forestalia Fennica vol. 41 no. 4 article id 7317. https://doi.org/10.14214/aff.7317
English title: Studies on the influence of stand and forest site type on the quality of Norway spruce stem.

Healthy, straight, more or less free from branches and slowly tapering stems are good raw material for woodworking industry. The aim of the study was to investigate, from the stand point of forest management, the influence of stand and forest site type on the technical quality of the stems. Sample plots were measured in Norway spruce (Picea abies (L.) H. Karst.) stands in Eastern Finland. Norway spruce growing in a stand with closed crowns developed thin branches and self-pruned, if the stand was dense in the early stages. The decisive time for the stand is, therefore, when it is at seedling stage and young stand. The stems are more branchy if the stand has been planted. The adequate planting density is discussed based on earlier studies. The sufficient density seems to be achieved when the spacing is at maximum two meters. When the stems are branchless up to four meters, thinning of spruce stand does not affect knottiness or stem form. A sparsely stocked, knotty young stand does not produce good-quality timber even if the stand is later dense. Selective thinning from above can be used to improve the quality of the wood.

The PDF includes a summary in German.

  • Laitakari, ORCID ID:E-mail:
article id 7317, category Article
Erkki Laitakari. (1935). Tutkimuksia metsikön ja kasvupaikan vaikutuksesta kuusen rungon kelpoisuuteen. Acta Forestalia Fennica vol. 41 no. 4 article id 7317. https://doi.org/10.14214/aff.7317
English title: Studies on the influence of stand and forest site type on the quality of Norway spruce stem.

Healthy, straight, more or less free from branches and slowly tapering stems are good raw material for woodworking industry. The aim of the study was to investigate, from the stand point of forest management, the influence of stand and forest site type on the technical quality of the stems. Sample plots were measured in Norway spruce (Picea abies (L.) H. Karst.) stands in Eastern Finland. Norway spruce growing in a stand with closed crowns developed thin branches and self-pruned, if the stand was dense in the early stages. The decisive time for the stand is, therefore, when it is at seedling stage and young stand. The stems are more branchy if the stand has been planted. The adequate planting density is discussed based on earlier studies. The sufficient density seems to be achieved when the spacing is at maximum two meters. When the stems are branchless up to four meters, thinning of spruce stand does not affect knottiness or stem form. A sparsely stocked, knotty young stand does not produce good-quality timber even if the stand is later dense. Selective thinning from above can be used to improve the quality of the wood.

The PDF includes a summary in German.

  • Laitakari, ORCID ID:E-mail:
article id 7309, category Article
I. Lassila. (1934). Kestävyys puun laadun tunnuksena. Acta Forestalia Fennica vol. 40 no. 32 article id 7309. https://doi.org/10.14214/aff.7309
English title: Durability as indication of wood quality.
Original keywords: puuaine; lujuus; kestävyys; puun laatu
English keywords: wood; timber; strength; durability

The article reviews the change in how the most sufficient wood material was chosen for different uses. The craftsmen used different characteristics to determine the quality of wood, for instance, tree species, location in the stem, whether it was sapwood or heartwood etc. Scientifically, the quality of the wood has been described by, for instance, specific gravity, bending strength and compressive strength. Durability would, however, be better attribute than strength to describe the quality of wood, because circumstances, like humidity and temperature can change where the wood is used. The article discusses further the development of durability indexes.

The PDF includes a summary in German.

  • Lassila, ORCID ID:E-mail:
article id 7302, category Article
M. Lappi-Seppälä. (1934). Karsimisesta ja sen metsänhoidollisesta merkityksestä. Acta Forestalia Fennica vol. 40 no. 25 article id 7302. https://doi.org/10.14214/aff.7302
English title: The silvicultural influences of pruning.

Pruning growing trees influences tree growth and value of the wood and yield of timber of the stand. Pruning living branches create open wounds on the stems that can risk the growth of tree species that are vulnerable to injuries. For instance, pruning has been shown to cause decay in Norway spruce (Picea abies (L.) H. Karst.), while Scots pine (Pinus sylvestris L.) can quickly heal over the branch scars. Pruning of living branches reduces the crown, the effect of which remains small if only the lowest branches are pruned. Pruning of dry branches has little effect on the health of the tree. The main objective of pruning is to improve the quality of timber. Knottiness decreases strength and appearance of timber. Pruning increases the yield of knot-free sapwood, which is especially valuable in veneer timber. Pruning is, therefore, at present most suitable for birch and aspen which are used in veneer industry. In both species pruning should be directed mainly to dry branches.

The PDF includes a summary in German.

  • Lappi-Seppälä, ORCID ID:E-mail:
article id 7286, category Article
Matti Jalava. (1934). Havaintoja puun aseman vaikutuksesta puun ominaisuuksiin. Acta Forestalia Fennica vol. 40 no. 9 article id 7286. https://doi.org/10.14214/aff.7286
English title: Influence of the position of a tree in the stand upon the properties of the wood.

The growth of a tree is influenced by inherited properties and external circumstances, including climate, soil, the position of the tree in the stand, and the position of the wood in the stem. The tree species have optimum climate and optimum conditions. The aim of this study was to determine if the summerwood content of the wood of Scots pine (Pinus sylvestris L.) is dependent on the rate of growth of the tree. Comparing the position of the sample trees in the stand, it seems that the position of the tree and the size of its crown influences strongly the quality of the wood. In a dense stand the summerwood content was higher in the trees that had small crowns. Thinning of the stand decreased the difference in summerwood content of the trees.

The PDF includes a summary in English.

  • Jalava, ORCID ID:E-mail:
article id 5632, category Article
Annikki Mäkelä, Veli-Pekka Ikonen, Petteri Vanninen. (1997). An application of process-based modelling to the development of branchiness in Scots pine. Silva Fennica vol. 31 no. 3 article id 5632. https://doi.org/10.14214/sf.a8534

A process-oriented tree and stand growth model is extended to be applicable to the analysis of timber quality, and how it is influenced by silvicultural treatments. The tree-level model is based on the carbon balance and it incorporates the dynamics of five biomass variables as well as tree height, crown base, and breast height diameter. Allocation of carbon is based on the conservation of structural relationships, in particular, the pipe model. The pipe-model relationships are extended to the whorl level, but in order to avoid a 3-dimensional model of entire crown structure, the branch module is largely stochastic and aggregated. In model construction, a top-down hierarchy is used where at each step down, the upper level sets constraints for the lower level. Some advantages of this approach are model consistency and efficiency of calculations, but probably at the cost of reduced flexibility. The detailed structure related with the branching module is preliminary and will be improved when more data becomes available. Model parameters are identified for Scots pine (Pinus sylvestris L.) in Southern Finland, and example simulations are carried out to compare the development of quality characteristics in different stocking densities.

  • Mäkelä, ORCID ID:E-mail:
  • Ikonen, ORCID ID:E-mail:
  • Vanninen, ORCID ID:E-mail:
article id 7194, category Article
T. Heikkilä. (1925). Kasvututkimuksia Perä-Pohjolasta. Acta Forestalia Fennica vol. 29 no. 4 article id 7194. https://doi.org/10.14214/aff.7194
English title: Growth studies in the northernmost Finland.

There is little knowledge about the value increment of the stands that are about to become mature for felling. Sample plots were measured in Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) stands in the most common forest site types in Rovaniemi, in northernmost Finland. Sample trees were chosen from dominant and codominant trees of the stand.

The value increments for the stands were generally very low. The average rotation of the studied stands would be 160 years. In the better forest site type, the increments of basal-area, volume and form height decrease slowly as the diameter of the tree increases. The value increment can give valuable information for intermediate fellings. They should be targeted mainly to large codominant trees and partly also in dominant trees that do not yet give logs, because their value increment is low.

The PDF includes a summary in German.

  • Heikkilä, ORCID ID:E-mail:
article id 5412, category Article
Jari Parviainen. (1990). Metsäpuiden paakkutaimituotannon nykynäkymät. Silva Fennica vol. 24 no. 1 article id 5412. https://doi.org/10.14214/sf.a15564
English title: Future trends for containerized tree seedling production: A literature review.

Containerized tree seedlings will be used on an increasing scale in the future in different parts of the world. There are number of techniques for the production of small one-year-old seedlings but it has not been possible to develop a completely satisfactory methods for large containerized seedlings production. In the long-term development of pine plantations established with containerized seedlings the greatest problem has been deformation of the root system. With a new method, based on a sheet of peat and root pruning, it has been possible to produce conifer seedlings with a good root regeneration potential and favourable morphological root system development. The use of small containerized seedlings allows an increase in planting density without any marked increase in regeneration costs.

The PDF includes an abstract in English.

  • Parviainen, ORCID ID:E-mail:
article id 5388, category Article
Martti Varmola. (1989). Männyn istutustaimikoiden lustonleveysmalli. Silva Fennica vol. 23 no. 4 article id 5388. https://doi.org/10.14214/sf.a15546
English title: A model for ring width of planted Scots pine.

Ring width at breast height is presented as a function of stem radius at breast height, the ratio between the diameter of a tree and the basal area median diameter, site index, and density of stand. By means of a conversion model ring width at stump height can be estimated as a function of ring width at breast height.

According to previous studies substantially better wood quality can be expected if mean width near the pith at stump height decreases from 3 to 2 mm. According to the present study only on the poorest sites suitable for Scots pine (Pinus sylvestris L.) planting (poor Vaccinium type) the ring width is less than 3 mm at stump height even in the thickest trees. On more fertile sites a substantial increase in the recommended planting density is required, if the mean ring width is aimed to be less than 3 mm. On the best sites it is impossible to reach mean ring width of less than 2 mm, when the density is less than 4,000 stems/ha. Only the thinnest trees on the poorest sites can have a mean ring width less than 2mm.

The PDF includes an abstract in English.

  • Varmola, ORCID ID:E-mail:
article id 5266, category Article
Matti Kärkkäinen. (1986). Malli männyn, kuusen ja koivun puuaineen oksaisuudesta. Silva Fennica vol. 20 no. 2 article id 5266. https://doi.org/10.14214/sf.a15445
English title: Model of knottiness of wood material in pine, spruce and birch.

A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.

The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5251, category Article
Markku Halinen. (1985). Männyn nuoruusvaiheen kasvunopeuden vaikutus sahatavaran laatuun. Silva Fennica vol. 19 no. 4 article id 5251. https://doi.org/10.14214/sf.a15430
English title: The effect of the growth rate of young Scots pine on the quality of sawn goods.

Totally 653 battens and planks sawn from butt logsof Scots pine (Pinus sylvestris L.) were chosen from 3 saw mills. The sawn goods were sorted according to normal sorting principles. In order to determine growth rate in the youth, the mean value of the average ring width was measured at the butt end at various distances from the pith.

The average ring width increased as the quality of the sawn goods decreased. The difference between the quality classes in ring width was measured between 2 and 4 cm from the pith. As the size of sawn goods, and, simultaneously, the log size increased, the average ring width increased in a given quality class. Research reinforced previous results, in which slow diameter growth of young Scots pines has been shown to reflect the good quality of sawn goods.

The PDF includes a summary in English.

  • Halinen, ORCID ID:E-mail:
article id 5246, category Article
Matti Kärkkäinen, Markku Halinen. (1985). Mäntysahatukkien minimivaatimusten täsmentäminen. Silva Fennica vol. 19 no. 3 article id 5246. https://doi.org/10.14214/sf.a15425
English title: Reappraisal of minimum requirements of Scots pine saw logs.

A test sawing was made of 807 Scots pine (Pinus sylvestris L.) saw logs of varying size and quality. The most important knot characteristic affecting the value of sawn goods was the diameter of the thickest dry knot. The new minimum requirements for pine logs were proposed on the basis of top diameter of the log and the diameter of the thickest dry and living knot.

The PDF includes a summary in English

  • Kärkkäinen, ORCID ID:E-mail:
  • Halinen, ORCID ID:E-mail:
article id 5172, category Article
Pekka Hynninen, Pentti Sepponen. (1983). Erään suoalueen ojituksen vaikutus purovesien laatuun Kiiminkijoen vesistöalueella, Pohjois-Suomessa. Silva Fennica vol. 17 no. 1 article id 5172. https://doi.org/10.14214/sf.a15087
English title: The effect of drainage on the quality of brook waters in the Kiiminkijoki River basin, Northern Finland.

The present study deals with the effect of forest drainage on some quality factors of brook waters. Under study were several brooks in the basin of the Kiiminkijoki River as well as its main tributary, the Nuorittajoki River. These are located in Northern Finland and belong to the international water program Project Aqua.

The following values were determined for the water samples: pH, electric conductivity, colour, concentration of suspended solids., NO2, NO3, and NH4 nitrogen concentrations, dissolved and total phosphorus, and Ca, Mg, K and Fe concentrations. Water quality in the brooks was monitored prior to and after ditching. A statistically significant change was noted in colour, in the concentration of suspended solids, in the NH4 concentration and in some brooks also in the pH value and in the total phosphorus, K, and Fe concentrations.

The PDF includes a summary in English.

  • Hynninen, ORCID ID:E-mail:
  • Sepponen, ORCID ID:E-mail:
article id 5076, category Article
Veikko Koski. (1980). Minimivaatimukset männyn siemenviljelyksille Suomessa. Silva Fennica vol. 14 no. 2 article id 5076. https://doi.org/10.14214/sf.a15017
English title: Minimum requirements for seed orchards of Scots pine in Finland.

In order to be recorded in the national list of untested seed orchards, set by law, a seed orchard must attain certain objectives. It is impossible to define universal requirements for all categories of seed orchards of all species. The present paper suggests minimum requirements for a clonal region seed orchards of Pinus sylvestris L in Finland. The clonal composition as well as factors influencing on the mating pattern have been given precise numerical threshold values. To be approved the seed orchard must fulfil all the requirements at the same time. The goal is to control the genetic superiority of the forest reproductive material obtained from registered untested seed orchards.

The PDF includes a summary in English.

  • Koski, ORCID ID:E-mail:
article id 5018, category Article
Pertti Laakso, Olli Saikku. (1979). Havaintoja karsituista männyistä sorvatun viilun laadusta. Silva Fennica vol. 13 no. 1 article id 5018. https://doi.org/10.14214/sf.a14872
English title: Observations on the quality of veneer from pruned Scots pine stems.
Original keywords: mänty; pystykarsinta; vaneri; laatu; viilu

The material was obtained from Scots pine (Pinus sylvestris L.) stems which were pruned 27 years earlier up to the height of 5–6 m. Rotary cutting was made from 16 pruned stems and 3 unpruned ones. The length of bolts was 70 cm and the thickness of veneer 1.5 mm. The proportion of good quality veneer was 46% in pruned stems and 14% in the others. Veneer with exellent quality was obtained from pruned stems up to the height of tree meters, that is to say a little under the pruning line.
The PDF includes a summary in English.

  • Laakso, ORCID ID:E-mail:
  • Saikku, ORCID ID:E-mail:
article id 5008, category Article
Jyrki Raulo, Gustaf Sirén. (1978). Neljän visakoivikon päätehakkuun tuotos ja tuotto. Silva Fennica vol. 12 no. 4 article id 5008. https://doi.org/10.14214/sf.a14862
English title: Yield in volume and money of final cutting in four curly birch stands.
Original keywords: visakoivu; tuotos; laatu

Curly birch (Betula pendula f. carelica Sok.) is characterized by large variations in stem form and the internal structure of the wood, and is generally divided in to four types on the basis of visible external stem characteristics. First plantation experiments in Finland in the 1920’s in experimental areas of the Finnish Forest Institute, had become ripe for cutting and were felled. The study material of this study consists of one 52-year old and three 42–43 -year old stands of curly birch.

The yield suitable for plywood manufacture from the oldest stand was 34,777 kg/ha and that of curly grained branch wood 39,452 kg/ha. The corresponding figures of the other stands were, on average 24,219 and 57,271 kg/ha. The yield from the stands were sold at the present-day price. The result was economically better than from any other forest tree species grown in Finland. The younger stands were obviously cut too early. It was concluded that the genetic quality of the seedlings used in the plantations in the 1920’s and 1930’s was not very high.

The PDF includes a summary in English.

  • Raulo, ORCID ID:E-mail:
  • Sirén, ORCID ID:E-mail:
article id 4966, category Article
Markku Mäkelä. (1977). Seulontatuloksia Algol-monikäyttöhakkurin hakkeesta. Silva Fennica vol. 11 no. 2 article id 4966. https://doi.org/10.14214/sf.a14817
English title: Screening results on the chips made by Algol-multipurpose chipper.
Original keywords: hake; hakkurit; hakkeen laatu

The first part of this paper consists of a study based on the available literature concerning the analysis of chip quality in the sulphate pulp process and the factors having an effect on chip quality. Using the empirical material, the suitability of the Williams chip classifier in evaluating the quality of chips made by the Algol chipper is first studied. The distribution of length and thickness of pulpwood-, long logs-, whole tree-, and logging residue chips in different conditions determined by screening is then presented.

The PDF includes a summary in English.

  • Mäkelä, ORCID ID:E-mail:
article id 4768, category Article
Veijo Heiskanen. (1968). Havaintoja eräiden vikaisuuksien vaikutuksesta mäntytukkien sahauksessa. Silva Fennica vol. 2 no. 3 article id 4768. https://doi.org/10.14214/sf.a14553
English title: Influence of some log defects in sawing of pine logs.

The present paper presents studies on the influence of some relatively common defects of Scots pine logs in Northern Finland on both the sawing yield and on the quality of the sawn goods. The study was based on test sawing of 25 logs for each of the defects (upright limb, heart shake and various kinds of wounds and scars) at Karihaara sawmill. The yield was graded into grades used for export timber according to the system of the sawmill. The proportion of the different export grades (U/S), fifths, sixths and culls) were used as characteristics together with the ratio of raw-wood consumption expressed as cu.ft/std.

Upright limbs occurring in a piece of sawn timber was shown to lower its quality to fifth grade in 43.5%, to sixth grade in 46.8% and to the category of culls in 6.5% of all cases. Only 3.2% of the cases the piece remained in U/S-grades. The size of the upright limb was the most important factor lowering the quality and affecting the ratio of raw-wood consumption.

Heart shakes are relatively common defects in pine logs deriving from over-mature trees. The quality-decreasing influence on the sawing yield depends clearly on the length of the shake in the cross-section. The same characteristics also decreases the ratio of raw-wood consumption. In addition, twisting and star shakes are considerably more harmful than straight ones. If rot occurs in connection with shakes, the places marred by the shakes are only capable of yielding sixth-grade sawn goods or culls.

Scar encountered in logs affect the sawn yield and its quality to quite a varying degree, but these defects themselves may also vary considerably both in size and quality. The length of the scar is highly significant as a quality-decreasing factor. If, in addition, rot is encountered, the defect is of a severe nature.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 4760, category Article
Veijo Heiskanen. (1968). Kuusitukkien laatuluokkajakautuma Etelä-Suomessa. Silva Fennica vol. 2 no. 1 article id 4760. https://doi.org/10.14214/sf.a14544
English title: Grade distribution of Norway spruce logs in Southern Finland.

The aim of the present study was to find the factors influencing the distribution of Norway spruce (Picea abies (L.) H. Karst.) logs on various grades with special stress on the effects of the grade on the value of logs. The material was obtained from ten sawmills located in Southern Finland by grading a total of 13,559 logs.

The results showed that knottiness in its different forms of appearance is the most important factor influencing the quality of spruce logs. Its significance is clearly greater in spruce than in Scots pine saw logs. Among the other defects, the most common are crooks. Even scars and decay occur to a considerable degree, but other defects seldom affect the grade. The quality of butt logs is markedly better than that of top logs. Both in butt and top logs the smallest logs in diameter are of poorer quality. However, in the largest diameter classes the quality begins again to decrease.

The difference in the quality of logs of the same grade at various sawmills is very small. The results of grading at varying times at the same sawmill show greater differences than can be observed between different sawmills. However, the logs of sawmills that procure the timber from coastal areas and islands are inferior to those which procure the timber from the mainland.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 4744, category Article
Pekka Tiililä. (1967). Tutkimuksia eräiden ulkomaisten puulajien siemensadon laadusta Suomessa. Silva Fennica vol. 1 no. 2 article id 4744. https://doi.org/10.14214/sf.a14454
English title: Studies on the quality of seed yields in some foreign tree species in Finland.

The aim of this present study was to elucidate the quality of seed of foreign tree species grown in Finland, and the factors which have affected the quality of the seed yields. Due to the smallness of the material, however, no far-fetching conclusions can be drawn. The bulk of the seeds were collected in the fall of 1964. The samples of seeds were X-rayed and their classification to empty seeds and full seeds of four quality classes was done on the basis of the anatomical structures. The species studied (a total of 34 species) belonged to the following genera: Abies, Chamaecyparis, Larix, Picea, Pinus, Pseudotsuga, Thuja and Tsuga.

The percentage of empty seeds was throughout quite high. The reasons for the generation of empty seeds probably originate from the special nature of the stands from which the seeds were collected. As a rule, the stands were young and small in area, which may have caused weak pollination and self-pollination leading to embryo mortality. Also, insect damages were observed.

Seeds with albumen still discernible, although the embryo had died, occurred to some extent. In some Larix species, even the bulk of the seeds recorded as full belonged in this group.

The ripening of seeds with embryos was quite successful in spite of the fact that the temperature sum of the year of ripening was slightly below the average in Finland. For instance, all Abies species ripened almost completely.

According to the results, it can be expected that the tree species examined in this study are able to produce rich yields of good-quality seed in Finland, provided that the ovules are well pollinated and self-pollination does not take place to a large extent.

The PDF includes a summary in English.

  • Tiililä, ORCID ID:E-mail:
article id 7186, category Article
Bror-Anton Granvik. (1968). Sahaustuloksen määrä ja laatu havutukkien kenttäpyörösahauksessa. Acta Forestalia Fennica no. 86 article id 7186. https://doi.org/10.14214/aff.7186
English title: The quantity and quality of the sawing yield in sawing coniferous logs with circular saw.

The aim of the study was to find out the ratio of raw wood consumption and the quantity and quality of the sawing yield using circular saws. The unit of study was one single log, the Norway spruce logs were divided into two grades and Scots pine logs in three grades. The principal material of the study was collected in 1950-51 using four types of saws of type EKA-50. The data consisted of 1,690 logs.

On the basis of the material, the efficiency of centre-piece sawing was 63.9% of the technical volume. On the average, 32.1% was unsorted goods, 11.5% fifths, 19.1% sixths and 1.2% culls. For spruce, the efficiency was superior to pine, which means that the consumption of raw wood for preparation of one standard of sawn goods is smaller in spruce than in pine. The volume of side boards trimmed reached about 2% of the total log volume. The efficiency of sawing and the ratio of raw-wood consumption were calculated both on the basis of the estimated and actual volume of trimmed goods. The raw-wood consumption is particularly good in logs of small and large top-diameter.

Goods sawn with circular saw have a characteristic shape. They are thinner at the ends than in the middle parts, and the deviation from the correct measure is larger in the first than in the last end of the pieces. They are also wedge-shaped because of the first piece sawn is thinner than the second one. The deviation from the correct measure exceeded the allowance for shrinking in seasoning. The goods are often under sized even if surplus measure occurs. In goods sawn using frame saws, however, it was difficult to discover any deviation from the correct measure.

The PDF includes a summary in English.

  • Granvik, ORCID ID:E-mail:
article id 7186, category Article
Bror-Anton Granvik. (1968). Sahaustuloksen määrä ja laatu havutukkien kenttäpyörösahauksessa. Acta Forestalia Fennica no. 86 article id 7186. https://doi.org/10.14214/aff.7186
English title: The quantity and quality of the sawing yield in sawing coniferous logs with circular saw.

The aim of the study was to find out the ratio of raw wood consumption and the quantity and quality of the sawing yield using circular saws. The unit of study was one single log, the Norway spruce logs were divided into two grades and Scots pine logs in three grades. The principal material of the study was collected in 1950-51 using four types of saws of type EKA-50. The data consisted of 1,690 logs.

On the basis of the material, the efficiency of centre-piece sawing was 63.9% of the technical volume. On the average, 32.1% was unsorted goods, 11.5% fifths, 19.1% sixths and 1.2% culls. For spruce, the efficiency was superior to pine, which means that the consumption of raw wood for preparation of one standard of sawn goods is smaller in spruce than in pine. The volume of side boards trimmed reached about 2% of the total log volume. The efficiency of sawing and the ratio of raw-wood consumption were calculated both on the basis of the estimated and actual volume of trimmed goods. The raw-wood consumption is particularly good in logs of small and large top-diameter.

Goods sawn with circular saw have a characteristic shape. They are thinner at the ends than in the middle parts, and the deviation from the correct measure is larger in the first than in the last end of the pieces. They are also wedge-shaped because of the first piece sawn is thinner than the second one. The deviation from the correct measure exceeded the allowance for shrinking in seasoning. The goods are often under sized even if surplus measure occurs. In goods sawn using frame saws, however, it was difficult to discover any deviation from the correct measure.

The PDF includes a summary in English.

  • Granvik, ORCID ID:E-mail:
article id 4613, category Article
Veijo Heiskanen. (1951). Mäntysahatukkien laatuarvioinnin tarkkuudesta. Silva Fennica no. 69 article id 4613. https://doi.org/10.14214/sf.a14009
English title: Accuracy of quality grading of Scots pine saw logs.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation discusses accuracy of the quality grading of Scots pine (Pinus sylvestris L.) saw logs suggested by professor Ilmari Vuoristo based on a data collected by Valtiala. According to the study, greatest inaccuracies in the grading by visual inspection was caused by differences between the evaluators.

  • Heiskanen, ORCID ID:E-mail:
article id 4612, category Article
Veijo Heiskanen. (1951). Mäntysahatukkien laadun mukaisista arvosuhteista. Silva Fennica no. 69 article id 4612. https://doi.org/10.14214/sf.a14008
English title: Value grading of Scots pine saw logs.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

Quality grading has been rarely used in pricing of saw logs due to lack of knowledge on how the quality of logs affects the value of the sawn wood. This presentation discusses the subject based on unpublished data professor Ilmari Vuoristo collected in 1930s on effects of timber grading on the quality and value of sawn wood. The quality classification developed by professor Vuoristo is presented.

  • Heiskanen, ORCID ID:E-mail:
article id 4611, category Article
Veijo Heiskanen. (1951). Sahatukkien laatuluokittelulla saavutettavista eduista. Silva Fennica no. 69 article id 4611. https://doi.org/10.14214/sf.a14007
English title: Benefits of qualitative classification of saw logs.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes benefits of the qualitative classification of saw logs to forest owners and forest industry.

  • Heiskanen, ORCID ID:E-mail:
article id 4610, category Article
Veijo Heiskanen. (1951). Sahatukkien laatuluokittelutavat. Silva Fennica no. 69 article id 4610. https://doi.org/10.14214/sf.a14006
English title: Methods of saw log classification according to quality.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the uses and principles of different kinds of grading of saw logs.

  • Heiskanen, ORCID ID:E-mail:
article id 4609, category Article
F. E. Siimes. (1951). Sahatukkien laatuluokittelu sahatavarain käytön, lajittelun ja koesahausten valossa. Silva Fennica no. 69 article id 4609. https://doi.org/10.14214/sf.a14005
English title: Classification according to quality of saw logs in the light of use, grading and sawing tests of sawn timber.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the grading of sawn timber for export and domestic use, and suggests improvements to grading of the sawn products in the saw mills to better answer the needs of export.

  • Siimes, ORCID ID:E-mail:
article id 4608, category Article
V. Pöyhönen. (1951). Teollisuuden raakapuun yleiset laatuvaatimukset. Silva Fennica no. 69 article id 4608. https://doi.org/10.14214/sf.a14004
English title: General quality standards of industrial raw timber.

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the development of standards for timber grades in Finland, and the present quality grades of raw timber for timber sales from state forests.

  • Pöyhönen, ORCID ID:E-mail:
article id 4516, category Article
M. Lappi-Seppälä. (1937). Karsimisesta arvopuun kasvatusta silmällä pitäen. Silva Fennica no. 42 article id 4516. https://doi.org/10.14214/sf.a14094
English title: Pruning as a means to produce quality timber.

 

 

  • Lappi-Seppälä, ORCID ID:E-mail:
article id 4500, category Article
Erkki Laitakari. (1937). Laatupuun kasvattamisesta. Silva Fennica no. 39 article id 4500. https://doi.org/10.14214/sf.a13910
English title: Production of good quality timber.

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes methods of forest management that lead to production of qood quality timber, needed in the saw industry.

  • Laitakari, ORCID ID:E-mail:
article id 4498, category Article
Ilmari Vuoristo. (1937). Havupuumetsien laatuarvo ja laadun arviointi. Silva Fennica no. 39 article id 4498. https://doi.org/10.14214/sf.a13908
English title: Quality of coniferous forests and the value of timber.

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes the quality of timber and coniferous forests in the point of view of saw industry.

  • Vuoristo, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive