Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'lodgepole pine'.

Category: Research article

article id 273, category Research article
Stefan Mattson, Urban Bergsten, Tommy Mörling. (2007). Pinus contorta growth in boreal Sweden as affected by combined lupin treatment and soil scarification. Silva Fennica vol. 41 no. 4 article id 273. https://doi.org/10.14214/sf.273
Effects of combining lupin (Lupinus nootkatensis L.) establishment and soil scarification on stem volume and stem biomass yield of lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) were studied on a poor boreal site in Sweden 18 years after plantation. A field randomized block experiment was established with three different scarification techniques (disc trenching, moulding and ploughing) followed by establishment of lupins by either seeds or roots. There were three blocks without and two blocks with lupins. Overall, on average for the three soil scarification techniques, the lupin treatment significantly increased the volume per hectare by 102%.The lupin treatment significantly increased the stem volume per hectare by 236% for mounding and 139% for disc trenching, whereas the 55% increase for ploughing was not significant. The increase in the total stem biomass yield per tree was more pronounced for larger trees; 46% for average trees and 106% for dominant trees. However, there were no significant differences between scarification techniques for the lupin treatment in total stem biomass yield. Over the 18-year period, the increased growth rate following the lupin treatment resulted in a significantly decreased average stem basic wood density (on average 6%) for the sample trees. Because lupin is a nitrogen-fixing plant species, the large increase in tree growth following the lupin treatment was probably an effect of increased amount of nitrogen in the soil. The results indicate that use of lupin is a possible alternative to increase site productivity of lodgepole pine on poor boreal sites.
  • Mattson, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden ORCID ID:E-mail:
  • Bergsten, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden ORCID ID:E-mail:
  • Mörling, Swedish University of Agricultural Sciences, Dept of Forest Ecology and Management, SE-901 83 Umeå, Sweden ORCID ID:E-mail: tommy.morling@ssko.slu.se (email)

Category: Research note

article id 914, category Research note
Ingegerd Backlund, Urban Bergsten. (2012). Biomass production of dense direct-seeded lodgepole pine (Pinus contorta) at short rotation periods. Silva Fennica vol. 46 no. 4 article id 914. https://doi.org/10.14214/sf.914
Lodgepole pine (Pinus contorta) is a fast-growing species that is suitable for producing woody biomass in Nordic countries. Direct seeding of this species is cheaper than planting and creates dense, stable stands. The objective of this study was to quantify the stem volume and biomass production of direct seeded lodgepole pine stands grown under different site conditions with different stem densities, at an age that would permit extensive harvesting of biomass. A circle-plot inventory was performed in 16 of the oldest direct seeded lodgepole pine stands in mid-northern Sweden. Stemwood production of almost 200 m3/ha was achieved on average on the best sites, rising to about 300 m3/ha for the best circle-plots within 30 years of direct seeding despite the fact that pre-commercial thinning was made once or twice. This corresponds to 100 and 140 tons of dry weight biomass/ha, respectively. Higher stand stem densities (≥3000 st/ha) yielded more biomass with only slight reductions in diameter at breast height. The development of stem volume with respect to dominant height in direct seeded stands was becoming comparable to that in planted stands with similar spacing. It therefore seems that there is an unutilized potential for cost-effectively growing lodgepole pine in dense stands for biomass production after direct seeding. It may be possible to devise regimes for short(er) rotation forestry that would yield substantial amount of inexpensive biomass for biorefineries within a few decades.
  • Backlund, Department of Forest Ecology and Management, Swedish University of Agricultural Sciences, Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID:E-mail: ingegerd.backlund@slu.se (email)
  • Bergsten, Department of Forest Ecology and Management, Swedish University of Agricultural Sciences, Skogsmarksgränd, SE-901 83 Umeå, Sweden ORCID ID:E-mail: urban.bergsten@slu.se

Category: Article

article id 5621, category Article
Pentti Hakkila. (1997). Peter Koch. 1996. Lodgepole pine in North America. Volumes I, II and III. Silva Fennica vol. 31 no. 2 article id 5621. https://doi.org/10.14214/sf.a8522

This article is a book review on a book ’Lodgepole pine in North America’ by Peter Koch, which is based partly on a synthesis of more than 6,000 papers on lodgepole pine, and partly on a systematic collection and analysis of wood and bark from branches, stems, stumps, and roots, as well as of foliage, of lodgepole pines.

  • Hakkila, ORCID ID:E-mail:
article id 5228, category Article
Pekka Saranpää. (1985). Kontortamännyn runkopuun trakeidien pituuden, halkaisijan ja soluseinän paksuuden vaihtelu. Silva Fennica vol. 19 no. 1 article id 5228. https://doi.org/10.14214/sf.a15407
English title: Length, diameter and cell wall thickness of tracheids in mature lodgepole pine bole wood.

Variation in tracheid morphology were examined for the bole wood of lodgepole pine (Pinus contorta Douglas ex Loudon) grown in Southern and Central Finland. Tracheid lengths were examined in a fast-grown and in slow-grown trees from three stands. Tracheid length increased with increasing height to 4–8 metres and decreased after that, and increased also with increasing age from the pith. The variation between stems was high. The shortest tracheids were about 1.11 mm near the piths and the longest about 4.10 mm near the bark.

Tracheid diameter and cell wall thickness were measured for the total number of 16 stems from Southern and Central Finland. Tracheid diameter increased with increasing distance from pith and the largest tracheids were at a height of 4–8 metres. Cell wall thickness varied independently of height in the stem. Summerwood cell wall thickness was twice that of springwood. There was a difference of 0.6 μm in springwood and 1.0 μm in summerwood double cell wall thickness between the two stands. Cell wall percentage was 29±4.7 in springwood and 69±7.3 in summerwood.

The PDF includes a summary in English.

  • Saranpää, ORCID ID:E-mail:
article id 5065, category Article
Juhani Niiranen. (1980). Methods used in cutting propagation of forest trees in Finland. Silva Fennica vol. 14 no. 1 article id 5065. https://doi.org/10.14214/sf.a15006

Cutting propagation of forest trees has recently been done in Finland mainly by the Foundation for Forest Tree Breeding. The aim has been to develop methods which could be used in forest nurseries for large scale production of rooted cuttings. Methods are being developed for tree species which seem to offer possibilities for economically profitable vegetative propagation. The most important tree species has been Norway spruce (Picea abies (L.) RH. Karst.), and also larches (Larix sp.), lodgepole pine (Pinus contorta), birches (Betula sp.), alders (Alnus sp.) and hybrid aspen (Populus tremula x P. tremuloides) are propagated. The sensitive rooting phase takes place in plastic greenhouses which have ventilation on the roof top, mist irrigation equipment and separate heating systems for the air and the ground. Methods used for cutting propagation of Norway spruce, lodgepole pine, larch species and broadleaved trees are described.

The PDF includes a summary in Finnish

  • Niiranen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive