Current issue: 55(1)

Under compilation: 55(2)

Scopus CiteScore 2019: 3.1
Scopus ranking of open access forestry journals: 6th
PlanS compliant
Silva Fennica 1926-1997
Acta Forestalia Fennica

Articles containing the keyword 'noise'.

Category: Research article

article id 984, category Research article
Christian Rottensteiner, Petros Tsioras, Heinz Neumayer, Karl Stampfer. (2013). Vibration and noise assessment of tractor-trailer and truck-mounted chippers. Silva Fennica vol. 47 no. 5 article id 984.
Highlights: Truck-mounted chippers were associated with higher vibration values, while tractor-trailer chippers had higher noise level; Chipping hardwood produced higher vibration magnitudes than softwood; Vibration and noise values in most cases did not exceed the exposure limit values set by the European Union.
During chipping, machine operators are exposed to whole-body vibration and noise bearing a risk to health. Vibration on the operator’s seat and noise inside the chipper cab was measured and analyzed. The factorial design considered two setup variants (tractor-trailer and truck-mounted) of two chipper models from different manufacturers during chipping of softwood and hardwood tree species. Furthermore, exposure to noise was measured during chipping of hardwood. Vibration and noise during chipping, driving between wood piles, and operational delays were measured separately. The results associated truck-mounted chippers with higher vibration values and tractor-trailer chippers with higher noise levels. The highest vibration levels were recorded while driving on the forest road from one log pile to another and the second highest during chipping. On the contrary, the lowest vibration levels were measured during operational delays with the chipper in idling condition. Chipping hardwood produced higher vibration magnitudes than softwood. Exposure to noise was significantly higher during chipping compared to driving and operational delays. Vibration and noise data were combined with time studies data, for the calculation of eight-hour energy equivalent total values, both for vibration and noise. In all cases, the exposure limit values set by the European Union were not exceeded, with the exception of truck-mounted chippers, which are likely to exceed the exposure action value for vibration.
  • Rottensteiner, University of Natural Resources and Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Straße 82, 1190 Wien, Austria ORCID ID:E-mail: (email)
  • Tsioras, Aristotle University, P.O. Box 227, GR-541 24 Thessaloniki, Greece ORCID ID:E-mail:
  • Neumayer, Specialist in Occupational Medicine, Wörndlestraße 10, 6020 Innsbruck, Austria ORCID ID:E-mail:
  • Stampfer, University of Natural Resources and Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Straße 82, 1190 Wien, Austria ORCID ID:E-mail:

Category: Article

article id 5029, category Article
Seppo Kellomäki. (1979). Metsän tarjoamat fyysiset hyödyt yhdyskuntasuunnittelussa. Silva Fennica vol. 13 no. 2 article id 5029.
English title: Benefits of forests in urban environment .

The potentials of forests in abatement of urban noise and air impurities are discussed based on literature and calculations. Excess attenuation of 6–7 dB seems to be possible in noise abatement applying Norway spruce (Picea abies (L.) H. Karst.) plantations. The potential in dust sedimentation is of 10,000–20,000 kg/ha/year and absorbtion to 7 kg/ha/yr. Forests seem also have considerable potential for control of climatic conditions in urban areas. Management of forests in urban environment is discussed. 

This paper was presented in the ‘Man and the Biosphere’ programme Project 2 seminar held on August 24–25 1978 in Hyytiälä research station of University of Helsinki. 

The PDF includes a summary in English. 

  • Kellomäki, ORCID ID:E-mail:
article id 4949, category Article
Seppo Kellomäki, Antti Haapanen, Hellevi Salonen. (1976). Tree stands in urban noise abatement. Silva Fennica vol. 10 no. 3 article id 4949.

The aim of the study was to determine which characteristics of tree stands could be used in urban noise control and to develop guidelines for practical urban forestry. The attenuation of artificially produced noise was measured in various types of stands. The effect of tree stands on noise attenuation has been analysed using a model based on the physics of sound propagation.

The results show that the excess noise attenuation caused by trees can be in good situations 60% measured in energy units, compared with the attenuation caused by geometric spreading. This is 5–8 dB. The total amount of needles, leaves and branches of a stand proved to be the most important factors in noise attenuation. However, the density and height of a stand had rather high value in predicting the behaviour of noise in tree stands. Based on multiple regression between noise attenuation and tree species composition, density and height of a stand it was developed the nomograms with which the noise level at a certain point can be predicted when the tree stand characteristics, the distance and the noise level of the noise source are known and on the opposite way.

The PDF includes a summary in Finnish.

  • Kellomäki, ORCID ID:E-mail:
  • Haapanen, ORCID ID:E-mail:
  • Salonen, ORCID ID:E-mail:

Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive