Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'parameter prediction'.

Category: Research article

article id 332, category Research article
Marc Palahí, Timo Pukkala, Antoni Trasobares. (2006). Calibrating predicted tree diameter distributions in Catalonia, Spain. Silva Fennica vol. 40 no. 3 article id 332. https://doi.org/10.14214/sf.332
Several probability density functions have been used in describing the diameter distributions of forest stands. In a case where both the stand basal area and number of stems per hectare are assessed, the fitted or predicted distribution is scaled using only one of these variables, with the result that the distribution often gives incorrect values for the other variable. Using a distribution that provides incorrect values for known characteristics means wasting information. Calibrating the distribution so that it is compatible with the additional information on stand characteristics is a way to avoid such wasting. This study examined the effect of calibration on the accuracy of the predicted diameter distributions of the main tree species of Catalonia. The distributions were calibrated with and without considering the prediction errors of the frequencies of diameter classes. When prediction errors were assumed, the calibration was done with and without making allowance for estimation errors in the stand level calibration variables. Calibrated distributions were more accurate than non-calibrated in terms of sums of different powers of diameters. The set of calibration variables that gave the most accurate results included six stand variables: number of trees per hectare, stand basal area, basal-area-weighted mean diameter, non-weighted mean diameter, median diameter, and basal area median diameter. Of the tested three-variable combinations the best was: number of trees per hectare, stand basal area, and basal-area-weighted mean diameter. Means were more useful calibration variables than medians.
  • Palahí, Centre Tecnológic Forestal de Catalunya. Passeig Lluis Companys, 23, 08010, Barcelona, Spain ORCID ID:E-mail: marc.palahi@ctfc.es (email)
  • Pukkala, University of Joensuu, Faculty of Forestry, P.O. Box 111, 80101 Joensuu, Finland ORCID ID:E-mail:
  • Trasobares, Foreco Technologies, Av. Diagonal 416, Estudio 2, Barcelona 08037, Spain ORCID ID:E-mail:
article id 617, category Research article
Jouni Siipilehto. (2000). A comparison of two parameter prediction methods for stand structure in Finland. Silva Fennica vol. 34 no. 4 article id 617. https://doi.org/10.14214/sf.617
The objective of this paper was to predict a model for describing stand structure of tree heights (h) and diameters at breast height (dbh). The research material consisted of data collected from 64 stands of Norway spruce (Picea abies Karst.) and 91 stands of Scots pine (Pinus sylvestris L.) located in southern Finland. Both stand types contained birch (Betula pendula Roth and B. pubescent Ehrh.) admixtures. The traditional univariate approach (Model I) of using the dbh distribution (Johnson’s SB) together with a height curve (Näslund’s function) was compared against the bivariate approaches, Johnson’s SBB distribution (Model II) and Model Ie. In Model Ie within-dbh-class h-variation was included by transforming a normally distributed homogenous error of linearized Näslund’s function to concern real heights. Basal-area-weighted distributions were estimated using the maximum likelihood (ML) method. Species-specific prediction models were derived using linear regression analysis. The models were compared with Kolmogorov-Smirnov tests for marginal distributions, accuracy of stand variables and the dbh-h relationship of individual trees. The differences in the stand characteristics between the models were marginal. Model I gave a slightly better fit for spruce, but Model II was better for pine stands. The univariate Model I resulted in clearly too narrow marginal h-distribution for pine. It is recommended applying of a constrained ML method for reasonable dbh-h relationship instead of using a pure ML method when fitting the SBB model.
  • Siipilehto, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FIN-01301 Vantaa, Finland ORCID ID:E-mail: jouni.siipilehto@metla.fi (email)
article id 650, category Research article
Jouni Siipilehto. (1999). Improving the accuracy of predicted basal-area diameter distribution in advanced stands by determining stem number. Silva Fennica vol. 33 no. 4 article id 650. https://doi.org/10.14214/sf.650
The objective of this paper was to study to what extent the accuracy of predicted basal-area diameter distributions (DDG) could be improved by means of stem number observations in advanced (H > 10 m) stands. In the Finnish forest management planning (FMP) inventory practice, stem number is determined only in young stands; in older stands stand basal area is used. The study material consisted of sixty stands of Norway spruce (Picea abies Karst.) and ninety-one stands of Scots pine (Pinus sylvestris L.) with birch (Betula pendula Roth and B. pubescens Ehrh.) admixtures in southern and eastern Finland. For test data, 167–292 independent, National Forest Inventory-based, permanent sample plots were used. DDGs were estimated with the maximum likelihood method. Species-specific models for predicting the distribution parameters were derived using regression analysis. The two-parameter Weibull distribution was compared to the three-parameter Johnson’s SB distributions in predicting DDGs. The models were based on either predictors that are consistent with current FMP (model G), or assuming an additional stem number observation (model G+N). The predicted distributions were compared in terms of the derived stand variables: stem number, total and timber volumes. The results were similar in modelling and test data sets. Methods, based on the SB distribution obtained with model (G+N), proved to give the most accurate description of the stand structure. Differences were marginal in stand total volumes. However, the error variation in stem number was 20% to 80% lower than when applying model (G). SB and Weibull distributions gave very much the same results if model (G) was applied.
  • Siipilehto, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FIN-01301 Vantaa, Finland ORCID ID:E-mail: jouni.siipilehto@metla.fi (email)

Category: Article

article id 5609, category Article
Matti Maltamo. (1997). Comparing basal area diameter distributions estimated by tree species and for the entire growing stock in a mixed stand. Silva Fennica vol. 31 no. 1 article id 5609. https://doi.org/10.14214/sf.a8510

The purpose of this study was to compare the Weibull distributions estimated for the entire growing stock of a stand and separately for Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) in describing the basal area diameter distributions in mixed stands. The material for this study was obtained by measuring 553 stands located in eastern Finland. The parameters of the Weibull distribution were estimated using the method of maximum likelihood. The models for these parameters were derived using regression analysis. Also, some parameter models from previous studies were compared with the measured distribution. The obtained distributions were compared using the diameter sums of the entire growing stock, diameter sums by tree species and of the sawtimber part of the growing stock. The results showed that far more accurate results were obtained when the distributions were formed using parameter models separately for the different tree species than when using parameter models for the entire growing stock. This was already true when considering the entire growing stock of the stand and especially when the results were examined by tree species. When the models for the entire growing stock were applied by tree species in relation to basal areas, the results obtained were overestimates for Norway spruce and underestimates for Scots pine. The models from earlier studies, where parameter models were estimated separately for tree species from the National Forest Inventory data, showed good fits also in regard to the data of this study.

  • Maltamo, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive