Current issue: 53(3)

Under compilation: 53(4)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'puuaines'.

Category: Article

article id 5310, category Article
Petri Kärenlampi. (1987). Puun lahonkestävyys ja kosteusdynamiikka. Silva Fennica vol. 21 no. 2 article id 5310. https://doi.org/10.14214/sf.a15467
English title: The decay resistance and moisture dynamics of wood.

In laboratory studies the heartwood content seems to be the only natural property of a wood of different tree species influencing the decay resistance. Moistening and drying by diffusion happen quite slowly. Scots pine (Pinus sylvestris L.) sapwood takes moisture by capillary action quicker than pine heartwood and Norway spruce (Picea abies (L.) H. Karst.) wood. Swelling and shrinkage are also greatest in pine sapwood. Impregnation of pine sapwood can give it better hydrophobic and dimensional stability than that of pine heartwood.

The PDF includes an abstract in English.

  • Kärenlampi, ORCID ID:E-mail:
article id 5277, category Article
Kirsi Maasalo. (1986). Pihlajan puuaineen ominaisuuksia. Silva Fennica vol. 20 no. 3 article id 5277. https://doi.org/10.14214/sf.a15456
English title: Properties of the wood of the rowan tree (Sorbus aucuparia).

The basic density of the wood of the rowan tree (Sorbus aucuparia L.) is almost the same along the stem but that of the bark is increasing along the stem. The moisture content of the wood and of the bark is increasing along the stem. Its strength in the bending and in the compression is high. The volume shrinkage is high.

The PDF includes an abstract in Finnish

  • Maasalo, ORCID ID:E-mail:
article id 5238, category Article
Matti Kärkkäinen. (1985). Suomalaisen kuusen puuaineen vertailua Keski-Euroopassa kasvaneiden kuusi- ja jalokuusilajien puuaineeseen. Silva Fennica vol. 19 no. 2 article id 5238. https://doi.org/10.14214/sf.a15417
English title: Norway spruce wood grown in Finland compared with spruce and fir wood grown in Central Europe.

The aim of this literature review was to compare Finnish Norway spruce (Picea abies (L.) H. Karst.) sawn goods to Central European spruce sawn goods which contain fir in some amount. However, it was found that no statistically valid comparisons have been made. Therefore, conclusions have been based mainly on the relationship between various properties and growth rate. According to this analysis, most properties of Finnish spruce are better, although small in practice.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5228, category Article
Pekka Saranpää. (1985). Kontortamännyn runkopuun trakeidien pituuden, halkaisijan ja soluseinän paksuuden vaihtelu. Silva Fennica vol. 19 no. 1 article id 5228. https://doi.org/10.14214/sf.a15407
English title: Length, diameter and cell wall thickness of tracheids in mature lodgepole pine bole wood.

Variation in tracheid morphology were examined for the bole wood of lodgepole pine (Pinus contorta Douglas ex Loudon) grown in Southern and Central Finland. Tracheid lengths were examined in a fast-grown and in slow-grown trees from three stands. Tracheid length increased with increasing height to 4–8 metres and decreased after that, and increased also with increasing age from the pith. The variation between stems was high. The shortest tracheids were about 1.11 mm near the piths and the longest about 4.10 mm near the bark.

Tracheid diameter and cell wall thickness were measured for the total number of 16 stems from Southern and Central Finland. Tracheid diameter increased with increasing distance from pith and the largest tracheids were at a height of 4–8 metres. Cell wall thickness varied independently of height in the stem. Summerwood cell wall thickness was twice that of springwood. There was a difference of 0.6 μm in springwood and 1.0 μm in summerwood double cell wall thickness between the two stands. Cell wall percentage was 29±4.7 in springwood and 69±7.3 in summerwood.

The PDF includes a summary in English.

  • Saranpää, ORCID ID:E-mail:
article id 5181, category Article
Matti Kärkkäinen, Olle Dumell. (1983). Kuusipuun taivutuslujuuden riippuvuus tiheydestä ja vuosiluston leveydestä Etelä- ja Pohjois-Suomessa. Silva Fennica vol. 17 no. 2 article id 5181. https://doi.org/10.14214/sf.a15097
English title: Effect of basic density and growth ring width on the bending strength of Norway spruce wood from southern and northern Finland.

A population consisting of 450 Norway spruce (Picea abies (L.) H. Karst.) samples was gathered from northern and southern Finnish wood. The static bending strength was affected greatly by the density of the wood. However, keeping the density constant, the bending strength was higher in northern than in southern Finnish wood. The reason was the effect of the growth ring width.

The basic density was affected by the growth rate. Keeping the growth ring width constant, the basic density was over 5 kg/m3 lower in northern than in southern Finnish wood. This result supports the earlier findings on the effect of latitude.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Dumell, ORCID ID:E-mail:
article id 4958, category Article
Matti Kärkkäinen. (1977). Araukaarian ja männyn puuaineen ominaisuuksien vertailua. Silva Fennica vol. 11 no. 1 article id 4958. https://doi.org/10.14214/sf.a14809
English title: Comparison of wood properties of Parana pine and Scots pine.

According to the available literature, the appearance of Parana pine (Araucaria angustifolia (Bertol.) Kuntze) wood resembles that of Scots pine (Pinus sylvestris L.). The anatomy is quite different, however. There are no resin canals and fusiform rays with resin canals in Parana pine. They are abundant in Scots pine, however. The basic density of Parana pine is higher. In both species the density increases from the pith outwards, the maximum being reached at the age of 100 years. Compression wood is more common in Parana pine than in Scots pine, and this makes the longitudinal shrinkage of Parana pine greater than that of Scots pine. Otherwise the shrinkage properties do not differ. The mechanical strength is of the same magnitude with the exception of hardness, where Parana pine is superior.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 4879, category Article
Matti Kärkkäinen. (1973). Mäntyrunkojen ydinsäteiden määrä ja koko. Silva Fennica vol. 7 no. 2 article id 4879. https://doi.org/10.14214/sf.a14713
English title: Amount and size of rays in Scots pine stems.

The material consists of four Scots pine (Pinus sylvestris L.) stems from which 757 samples were taken from various heights and distances from the pith. According to the results, the number of rays and their sizes are greater at the stump level than higher up in the stem. The size increases, and the number decreases on moving from the pith outwards. However, there are differences between stems as regards the variation model. The ratio between the number of fusiform rays and that of uniseriate rays seems to be lower than anticipated earlier, about 1:40–1:50. The average proportion of ray volume varied from 5.6% to 7.3%.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive