Current issue: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'raw material'.

Category: Research article

article id 1611, category Research article
Ilpo Ervasti. (2016). Wood fiber contents of different materials in the paper industry material chain expressed in roundwood equivalents (RWEs). Silva Fennica vol. 50 no. 4 article id 1611. https://doi.org/10.14214/sf.1611
Highlights: The paper industry material recycling chain consists of different material streams; Consumed paper products form a huge fiber source for industry. However, a reliable measuring system should be developed to quantify these fiber volumes; Converting factors are introduced to quantify the wood fiber contents of different paper industry-related materials of the chain, namely, wood pulp, paper and recovered paper; By using these conversion factors it is possible to convert for example global recovered paper utilization volumes into wood fiber volumes expressed in roundwood equivalents (RWEs).

At present, there are no means for reliably comparing the wood fiber contents of different material streams within the paper industry material chain with each other. The aim of this article is to introduce conversion factors that make it possible to quantify the volume of wood expressed in roundwood equivalent (RWE) values for different paper industry-related materials in the material chain. These conversion factors apply to wood pulp, paper, and recovered paper. European data are used in quantifying the paper industry material streams and calculating the RWE conversion factors. The introduced conversion factors can be used to estimate RWE volumes at a global scale. With assumption that paper recycling did not occur and that paper production volume remained unchanged, an additional volume of 666 million m3 RWEs would be required globally per annum to produce 167 million tons of virgin wood pulp to replace 222 million tons of recovered paper utilized by the paper industry in 2010. This volume is approximately the same as 1.6 times the total removal of wood in Europe (EU27), or the total annual removal of wood in the USA, Canada, and Brazil combined.

  • Ervasti, Aalto University, Industrial Engineering and Management, Maarintie 8, 02150 Espoo, Finland ORCID ID:E-mail: ilervasti@gmail.com (email)
article id 1342, category Research article
Blas Mola-Yudego, Gianni Picchi, Dominik Röser, Raffaele Spinelli. (2015). Assessing chipper productivity and operator effects in forest biomass operations. Silva Fennica vol. 49 no. 5 article id 1342. https://doi.org/10.14214/sf.1342
Highlights: A model is constructed to assess the productivity in chipping of wood biomass at roadside; The data includes 172 trials and 67 operators in Italy; The operator effect was included in a mixed model approach; The R2 were 0.76 (fixed part) and 0.88 (incl. operator effects).

The present research focuses on the productivity of energy wood chipping operations at several sites in Italy. The aim was to assess the productivity and specifically the effect attributed to the operator in the chipping of wood biomass. The research included 172 trials involving 67 operators across the country that were analysed using a mixed model approach, in order to assess productivity, and to isolate the operator effect from other potential variables. The model was constructed using different predictors aiming to explain the variability due to the machines and the raw-materials. The final model included the average piece weight of raw material chipped as well as the power of the machine. The coefficients of determination (R2) were 0.76 for the fixed part of the model, and 0.88 when the effects due to the operators were included. The operators’ performance compared to their peers was established, and it was compared to a subjective classification based on the operator’s previous experience. The results of this study can help to the planning and logistics of raw material supply for bioenergy, as well as to a more effective training of future forest operators.

  • Mola-Yudego, School of Forest Sciences, University of Eastern Finland, P.O. Box 111, FI-80101 Joensuu, Finland; NIBIO Norwegian Institute of Bioeconomy Research, P.O. Box 115, 1431 Ås, Norway ORCID ID: http://orcid.org/0000-0003-0286-0170 E-mail: blas.mola@uef.fi (email)
  • Picchi, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy ORCID ID:E-mail: picchi@ivalsa.cnr.it
  • Röser, Forest Feedstocks Group, FPInnovations, Vancouver, British Columbia, Canada ORCID ID:E-mail: dominik.roser@fpinnovations.ca
  • Spinelli, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy ORCID ID:E-mail: spinelli@ivalsa.cnr.it

Category: Article

article id 7482, category Article
Kullervo Kuusela. (1959). Management and cutting budget problems in the Himalayan conifer forestry. Acta Forestalia Fennica vol. 67 no. 8 article id 7482. https://doi.org/10.14214/aff.7482

An investigation was carried out in the area of Beas River in India in the conifer forests of the region to study the possible supply of raw material for forest industries. The investigation based on an agreement between the Government of Finland and the Government of India about techcnical assistance to India.

The results of the survey suggest that though the Himalayan conifer forests are scattered and they lie on high altitude and in difficult terrain, their potential value is very important to the Indian national economy. Their extraction is feasible in much larger scale than now. The present yield coming to the markets is 30-10%, or even less, of the obtainable yield under intensive management and integrated utilization of wood. The obtainable yield could support comparatively large saw milling as well as pulp and paper industries.

The problems in developing the Himalayan conifer forestry cover the field of forest management, silviculture, re-forestation, logging, relations between forestry and the local population, forest administration, sales policy and industrial planning. Estimating the actual possibilities requires reliable resource inventories. Cultivation of trees for primitive sleeper production should be abandoned, management systems modified in accordance with the principle of progressive yield. The future management should be based on the exploitation of the existing over-mature stock and on the growth of the new stands.

The PDF includes a summary in Finnish.

  • Kuusela, ORCID ID:E-mail:
article id 5267, category Article
Matti Kärkkäinen. (1986). Mänty- ja kuusirunkojen arvosuhteet. Silva Fennica vol. 20 no. 2 article id 5267. https://doi.org/10.14214/sf.a15446
English title: Value relations of Scots pine and Norway spruce stems.

A mathematical model was developed for determining the value of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) stems on the basis of sawing and pulping. The model was based on selling prices of sawn goods, pulp and other products as well as processing costs. Sawing was applied to large-dimension parts of stems and pulping to other parts and small stems. Bark and other residues were burned. The quality of pine stems was described by the distance of the lowest dead branch. In spruce only stem size affected the quality-

According to the results, the size of stem affects considerably the value of pine stems and clearly that of spruce stems. The main reason is an increase in the productivity of frame sawing as the stem size increases. In pine another factor is the higher price of sawn goods. The effect of pulp price increases as the stem size decreases. Even in large sized stems the effect of pulp was notable as the value of chips and saw dust was determined on the basis of product values in export. The competition ability of mechanical pulp was greatly affected by the price of electricity.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5261, category Article
Matti Kärkkäinen. (1986). Koivuvaneritukkien ja -runkojen arvosuhteet. Silva Fennica vol. 20 no. 1 article id 5261. https://doi.org/10.14214/sf.a15440
English title: Value relations of birch veneer logs and stems in Finland.

A model was developed in order to describe the peeling of veneer for determining value relationship for birch veneer logs and stems. The model was based on selling prices of veneer and other products as well as processing costs. The model was utilized for determining the effect of various input variables on the log value.

According to the results, the effect of tree size was important for the value of raw material. Even knottiness had an effect although only in the higher manufacturing costs of knotty veneer were taken into account. Pruning was a method to increase substantially the proportion of knotless veneer.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5162, category Article
Jarmo Eronen. (1982). Soviet pulp and paper industry: Factors affecting its areal expansion. Silva Fennica vol. 16 no. 3 article id 5162. https://doi.org/10.14214/sf.a15077

Planners of the Soviet pulp and paper industry are constantly faced with the problem: which investment policy guarantees the best location structure? Should one invest in existing localities or expand to new areas, especially in heavily forested parts of Siberia? A location theory for the pulp and paper industry, based on three factors (markets, wood raw materials, relative costs) has been suggested by the Soviet authors Antonov and Trusova. In the present study the theory is – for the first time – given empirical contents and the feasible areas for future growth of the industry are tentatively determined. One of the main findings of the study is the detecting of considerable unutilized wood reserves in the European USSR. This supports those Soviet views advocating a European-oriented location in investment strategy for the industry, as market and cost factors are unfavourable to Siberian location.

The PDF includes a summary in Finnish.

  • Eronen, ORCID ID:E-mail:
article id 4765, category Article
Jouko Einola. (1968). Raakapuuvaraston suunnittelusta ja tarkkailusta. Silva Fennica vol. 2 no. 2 article id 4765. https://doi.org/10.14214/sf.a14550
English title: On the planning and control of raw-wood inventories.

The present study is an examination of the problems involved in raw-wood inventory from the viewpoint of business economics. The term inventory used here includes the standing timber marked for cutting as well as delivery contracts. The task of inventory is to buffer the differences in timing, locality, quantity and quality caused by purchase, production and delivery processes. The basic problem is concerned with profits.

The basic aim is to keep the inventory small. Its limits are determined by comparing the storage costs and costs of shortage. The costs may be decreased without risking the reliability of deliveries by technical development and road improvement, which also decrease dependence on the seasonal variation of harvesting of timber. A model based on present practices, statistics and practical experiences can be used to calculate different alternatives. The volume of purchases, felling, deliveries, transportation, and differences in quantities and transfer is used to estimate the target level of the inventory. It forms a forecast which the future performances can be compared to. In addition to monitoring turnover rate of the total inventory and capital tied to the inventory, also the exceptions in structure, time and quantity of the inventory and the factors changing it should be monitored. A special difficulty in timber inventory book-keeping are the continuous variations in the measured volumes even if no loss occurs.

The PDF includes a summary in English.

  • Einola, ORCID ID:E-mail:
article id 7585, category Article
Jorma Ahvenainen. (1976). Suomen paperiteollisuuden kilpailukyky 1920- ja 1930-luvulla. Acta Forestalia Fennica no. 151 article id 7585. https://doi.org/10.14214/aff.7585
English title: The competitive position of the Finnish paper industry in the inter-war years.

The aim of the present study was to explain how the Finnish paper industry increased its production and its exports, broadened its markets and managed to show a profit in its activities during the period between the two world wars, despite the restrictive international commercial policies then prevailing, and despite the economic depression of the thirties. Newsprint has been treated as a subject for detailed examination.

The study is based on a comparative investigation of the price received by the paper mills for their paper and the costs of production. Since the market price of paper fell during the twenty years in question, one must examine how the mills responded to the reduction in selling price. Technically the study ranges from the valuation of the standing timber to the handing over of the finished product to the buyer. Between 1929 and 1933 the cost of producing newsprint fell by 387 marks per ton.

The most significant factor in maintaining competitive power was the technical development and increased output brought about in the mills. That alone accounted for half the savings achieved. The reduction in the buying price of wood and in delivery costs accounted for about a third of the difference in production costs, and other factors for the remaining fifth. In addition, the devaluation of the Finnish mark was crucial. Measures taken to reduce costs were effective in so far as the paper mills, with only one or two exceptions, maintained their competitiveness in international markets and managed not only to retain but also to extend their markets.

The PDF includes a summary in English.

  • Ahvenainen, ORCID ID:E-mail:
article id 7574, category Article
Olavi Isomäki. (1974). Sahateollisuuden kuorintajätteiden käyttömahdollisuudet. Erityisesti käyttö maanparannusaineena ja kasvualustana. Acta Forestalia Fennica no. 140 article id 7574. https://doi.org/10.14214/aff.7574
English title: Using possibilities of barking waste in sawmill industry specially using as a soil improver and substrate for plants.

Residue of the wood is good raw material for pulp and board industries, but the question of the use of barking waste still remains to a great extent unsolved. This research deals with the possibilities to utilize the barking waste of sawmill industry in general and, in particular, its use as a soil improver and substrate for plants. It also explains the industrial manufacturing method of composted bark, bark humus, developed by the author as well as the properties of bark humus and the economy of bark humus and the economy of manufacturing.

The PDF includes a summary in Finnish.

  • Isomäki, ORCID ID:E-mail:
article id 4728, category Article
Yrjö Roitto. (1965). Polttopuun käyttö Euroopassa vv. 1950.1960 sekä mahdollisuudet polttopuun teolliseen käyttöön v. 1975. Silva Fennica no. 117 article id 4728. https://doi.org/10.14214/sf.a14286
English title: Use of fuel wood in Europe in 1950-60 and possibilities of converting fuelwood to industrial uses by 1975.

According to the statistics, the fuel wood consumption in Europe has declined since 1925/1929, when the total fuel wood consumption was 144 million m3. In 1960 the consumption was 108 million m3. Because of insufficient statistics in the early years, the drop may even be larger than shown by the figures. The aim of this paper is to assess what part of European fuel wood removals in 1960 could be used for industrial purposes by 1975.

It was estimated that in 1975 the use of fuel wood in Europe will be about 45–55 million m3 less than in 1960 and about 10 million m3 of this amount will consist of coniferous species. It is believed that about 45 million m3 could be transferred to industrial use by 1975, and 55 million m3 is supposed to be the maximum reduction achievable by 1975. The estimates are based on the revised European fuel wood removal figures.

The new European timber trends and prospects study reveals a shortage of small-sized coniferous wood of about 25–43 million m3, depending on whether the exports from Europe are curtailed or not. The decrease of coniferous fuel wood of 10 million m3 could almost entirely be transferred for the use of industry.

A more important question is, is there demand for the extra small-size broadleaved wood. It is important to note that there is no longer any technical limitations on the use of this kind of wood for producing pulp, paper paperboard and wood-based panel products.

Fuelwood is often collected by the farmer and used near the farm. If the wood is to be used in the industry, harvesting and transport costs need to be decreased. However, productivity of the logging and transportation may be significantly improved by cutting the trees into longer lengths and professional harvesting. About 40% of the potential transfer of fuelwood to industrial uses is concentrated in Finland (7 million m3), France (5 million m3), and Italy (7 million m3). Other countries with significant potential shifts could be Romania, Spain and Yugoslavia.

The PDF includes a summary in French, German, Dutch, Russian and Finnish.

  • Roitto, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive