Current issue: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'sawn goods'.

Category: Article

article id 7184, category Article
Bror-Anton Granvik. (1967). Havusahatavaran valmistus kenttäpyörösahalla : työtieteellinen tutkimus. Acta Forestalia Fennica vol. 84 no. 3 article id 7184. https://doi.org/10.14214/aff.7184
English title: The preparation of coniferous sawn goods using circular saws. A work study.

The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.

The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin. 

The PDF includes a summary in English.

  • Granvik, ORCID ID:E-mail:
article id 7126, category Article
Viljo Holopainen. (1960). On the price elasticity of the supply of sawn wood for export. Acta Forestalia Fennica vol. 73 no. 4 article id 7126. https://doi.org/10.14214/aff.7126

The present investigation is concerned with the price elasticity of sawn wood, concentrating on the price elasticity of sawn wood supply for export. The supply of sawn wood for export is referred to the joint attitude to price changes of all producers participating in the market.

The study concludes that producers cannot in the short- and medium-term view use the price parameter to increase total utilization in the sawn wood market. Demand holds a primary position in price formation. The capacity reserve of the sawmills permits great variations in output at the mill level, and thus elasticity in the supply of sawn wood. High timber costs are typical for the industry. Supply of roundwood can easily be adapted even to large variations in demand. The price elasticity of roundwood supply is rather great.

The long process of sawn wood production and the resulting relatively long lead-time of deliveries result in a long adaptation time of supply. Expansion and contraction of sawn wood exports cause, via the effect of exports, on income similar fluctuations in the domestic sales of sawn wood. This weakens the price elasticity of exports in some degree.

The ‘instantaneous elasticity’ upwards of sawn wood supply might be great, but speculation with stocks at the different levels of production often makes it ‘incalculable’. The price elasticity of a medium-long and long period can be expected to be relatively great upwards. The downward elasticity of a period of medium length is probably small. The elasticity of a prolonged period may be influenced by the substitution of other materials for sawn wood.

The PDF includes a summary in Finnish.

  • Holopainen, ORCID ID:E-mail:
article id 7484, category Article
Seppo Ervasti. (1959). Suomen havusahatavaranmyynnin kausi- ja suhdannevaihteluista vuosina 1951-1958. Acta Forestalia Fennica vol. 68 no. 2 article id 7484. https://doi.org/10.14214/aff.7484
English title: On the seasonal and business cycle fluctuations of Finnish sawn softwood sales in 1951-1958.

The investigation examines export sales of Finnish sawn softwood sales in 1951-1958, concentrating on the volume of the sales. The material was collected from the archives of Finnish Sawmill Owner’s Association and the Finnish Sawmill Control Organization and the annual reports of the former. Correlation analysis was used in assessing the interdependence of the monthly sales volume and the price, and opening sales and the total sales volume of the year.

A slightly negative correlation was seen between the sale price and the monthly sales volume. Goods sold at under average prices are more abundant than goods sold at over average prices. Generally, with a rising price trend, the annual sales volume increased, but with falling prices the situation was reverse. The sales volume has been dependent on the business cycle development of prices. There was positive correlation between the opening sales and the total sales quantity for the year. The sales volume was at its maximum in the period between November and January, and at the minimum between March and September.

The time of the sales made to different countries differed little judged by quarterly statistics. It seems that the major shippers have generally concluded opening sales first. Northern Finnish shippers and the small shippers of Southern Finland have sold proportionately least during the last quarter. In general, the poorer the qualities in question the smaller on an average the proportion of opening sales but the greater the share of clearance sales.

The PDF includes a summary in English.

  • Ervasti, ORCID ID:E-mail:
article id 7480, category Article
Seppo Ervasti. (1958). Suomesta myydyn havusahatavaran hintasuhteiden muutokset vuosina 1932-38 ja 1951-56. Acta Forestalia Fennica vol. 67 no. 6 article id 7480. https://doi.org/10.14214/aff.7480
English title: Changes in the price ratios of sawn softwood sold by Finland in 1932-38 and 1951-56.

The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.

Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.

In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.

The PDF includes a summary in English.

  • Ervasti, ORCID ID:E-mail:
article id 7462, category Article
Seppo Ervasti. (1955). Suomesta Pohjanmeren maihin vuosina 1920-1952 viety havusahatavara : koostumuksen muutokset. Acta Forestalia Fennica vol. 64 no. 2 article id 7462. https://doi.org/10.14214/aff.7462
English title: Export of sawn softwood from Finland to the North Sea Countries in 1920-1952.

The objective of the investigation was to study the trends and fluctuations in the composition of sawn goods, changes due to business cycles, and casual fluctuations. The subject is confined to sawn softwood export to Great Britain, the Netherlands, Belgium and France (The North Sea countries) in 1920-1952. The data was based mainly on statistics of the Board of Customs, Series of Foreign Trade, Finnish Sawmill Owner’s Association and the Finnish Official Statistics.

The North Sea countries took 75-85% of the sawn softwood exported from Finland before World War II, and 50-70% of the quantity exported since the war. Sawn softwood export from Finland is almost exclusively long and small-dimension timber. The composition of the export from Finland to the North Sea countries was defined already during the 1900th century, and no big chances were observed even during the period of 1920-1952. The only definite trend was decrease in the proportion of u/s grade.

The PDF includes a summary in English.

  • Ervasti, ORCID ID:E-mail:
article id 5267, category Article
Matti Kärkkäinen. (1986). Mänty- ja kuusirunkojen arvosuhteet. Silva Fennica vol. 20 no. 2 article id 5267. https://doi.org/10.14214/sf.a15446
English title: Value relations of Scots pine and Norway spruce stems.

A mathematical model was developed for determining the value of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) stems on the basis of sawing and pulping. The model was based on selling prices of sawn goods, pulp and other products as well as processing costs. Sawing was applied to large-dimension parts of stems and pulping to other parts and small stems. Bark and other residues were burned. The quality of pine stems was described by the distance of the lowest dead branch. In spruce only stem size affected the quality-

According to the results, the size of stem affects considerably the value of pine stems and clearly that of spruce stems. The main reason is an increase in the productivity of frame sawing as the stem size increases. In pine another factor is the higher price of sawn goods. The effect of pulp price increases as the stem size decreases. Even in large sized stems the effect of pulp was notable as the value of chips and saw dust was determined on the basis of product values in export. The competition ability of mechanical pulp was greatly affected by the price of electricity.

The PDF includes an abstract in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5251, category Article
Markku Halinen. (1985). Männyn nuoruusvaiheen kasvunopeuden vaikutus sahatavaran laatuun. Silva Fennica vol. 19 no. 4 article id 5251. https://doi.org/10.14214/sf.a15430
English title: The effect of the growth rate of young Scots pine on the quality of sawn goods.

Totally 653 battens and planks sawn from butt logsof Scots pine (Pinus sylvestris L.) were chosen from 3 saw mills. The sawn goods were sorted according to normal sorting principles. In order to determine growth rate in the youth, the mean value of the average ring width was measured at the butt end at various distances from the pith.

The average ring width increased as the quality of the sawn goods decreased. The difference between the quality classes in ring width was measured between 2 and 4 cm from the pith. As the size of sawn goods, and, simultaneously, the log size increased, the average ring width increased in a given quality class. Research reinforced previous results, in which slow diameter growth of young Scots pines has been shown to reflect the good quality of sawn goods.

The PDF includes a summary in English.

  • Halinen, ORCID ID:E-mail:
article id 5246, category Article
Matti Kärkkäinen, Markku Halinen. (1985). Mäntysahatukkien minimivaatimusten täsmentäminen. Silva Fennica vol. 19 no. 3 article id 5246. https://doi.org/10.14214/sf.a15425
English title: Reappraisal of minimum requirements of Scots pine saw logs.

A test sawing was made of 807 Scots pine (Pinus sylvestris L.) saw logs of varying size and quality. The most important knot characteristic affecting the value of sawn goods was the diameter of the thickest dry knot. The new minimum requirements for pine logs were proposed on the basis of top diameter of the log and the diameter of the thickest dry and living knot.

The PDF includes a summary in English

  • Kärkkäinen, ORCID ID:E-mail:
  • Halinen, ORCID ID:E-mail:
article id 5238, category Article
Matti Kärkkäinen. (1985). Suomalaisen kuusen puuaineen vertailua Keski-Euroopassa kasvaneiden kuusi- ja jalokuusilajien puuaineeseen. Silva Fennica vol. 19 no. 2 article id 5238. https://doi.org/10.14214/sf.a15417
English title: Norway spruce wood grown in Finland compared with spruce and fir wood grown in Central Europe.

The aim of this literature review was to compare Finnish Norway spruce (Picea abies (L.) H. Karst.) sawn goods to Central European spruce sawn goods which contain fir in some amount. However, it was found that no statistically valid comparisons have been made. Therefore, conclusions have been based mainly on the relationship between various properties and growth rate. According to this analysis, most properties of Finnish spruce are better, although small in practice.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 5182, category Article
Matti Kärkkäinen, Herman Hakala. (1983). Kuusitukin koon vaikutus sivulautojen taivutus- ja puristuslujuuteen. Silva Fennica vol. 17 no. 2 article id 5182. https://doi.org/10.14214/sf.a15098
English title: Effect of log size on the bending and compression strength of side boards in Norway spruce.

In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.

The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Hakala, ORCID ID:E-mail:
article id 4768, category Article
Veijo Heiskanen. (1968). Havaintoja eräiden vikaisuuksien vaikutuksesta mäntytukkien sahauksessa. Silva Fennica vol. 2 no. 3 article id 4768. https://doi.org/10.14214/sf.a14553
English title: Influence of some log defects in sawing of pine logs.

The present paper presents studies on the influence of some relatively common defects of Scots pine logs in Northern Finland on both the sawing yield and on the quality of the sawn goods. The study was based on test sawing of 25 logs for each of the defects (upright limb, heart shake and various kinds of wounds and scars) at Karihaara sawmill. The yield was graded into grades used for export timber according to the system of the sawmill. The proportion of the different export grades (U/S), fifths, sixths and culls) were used as characteristics together with the ratio of raw-wood consumption expressed as cu.ft/std.

Upright limbs occurring in a piece of sawn timber was shown to lower its quality to fifth grade in 43.5%, to sixth grade in 46.8% and to the category of culls in 6.5% of all cases. Only 3.2% of the cases the piece remained in U/S-grades. The size of the upright limb was the most important factor lowering the quality and affecting the ratio of raw-wood consumption.

Heart shakes are relatively common defects in pine logs deriving from over-mature trees. The quality-decreasing influence on the sawing yield depends clearly on the length of the shake in the cross-section. The same characteristics also decreases the ratio of raw-wood consumption. In addition, twisting and star shakes are considerably more harmful than straight ones. If rot occurs in connection with shakes, the places marred by the shakes are only capable of yielding sixth-grade sawn goods or culls.

Scar encountered in logs affect the sawn yield and its quality to quite a varying degree, but these defects themselves may also vary considerably both in size and quality. The length of the scar is highly significant as a quality-decreasing factor. If, in addition, rot is encountered, the defect is of a severe nature.

The PDF includes a summary in English.

  • Heiskanen, ORCID ID:E-mail:
article id 4694, category Article
Seppo Ervasti. (1960). Metsäntuotteet Ison-Britannian rakennusaineiden mainonnassa. Silva Fennica no. 104 article id 4694. https://doi.org/10.14214/sf.a9133
English title: The position of forest products in advertising of building materials in Great Britain.

This paper concentrates on analysing advertising of building materials used in residential, agricultural and factory building, power station construction, warehouse building and the joinery industry in Great Britain, concentrating on advertising to consumers, including architects, engineers, building entrepreneurs, farmers and do-it-yourself practitioners. The material is based on questionnaires answered by 8 professionals of the field, and assessment of two leading English paper in the field of construction in January 1 – June 30, 1959.

It was concluded that forest products were clearly less advertised than other building materials. The unweight average degree of advertising of all forest products was. 1.7, while the score was 2.6 for other materials. Of the different forest products stand out advertising of plywood and sawn good. The most extensively advertised materials were metals, concrete and cement, and some covering materials. Forest products accounted only ¼ of the advertising space in the publications.

The most important media used in advertising building materials were trade journals, calendars and yearbooks, courses and lectures, exhibitions and fares and direct advertising. The most important audience of advertising were architects, followed by the entrepreneurs. It is suggested that the advertising of Finnish products in Great Britain might be best organized by placing it in the hands of two organizations: the sales organisation and a separate body for advertising. The producers would manage the advertising of individual brands to sales level, while the other levels (agents, importers, merchants) would manage the joint advertising of the forest products to the lower sales levels and consumers. A Finnish market research and information offices might be established in Great Britain.

The PDF includes a summary in Finnish.

  • Ervasti, ORCID ID:E-mail:
article id 7186, category Article
Bror-Anton Granvik. (1968). Sahaustuloksen määrä ja laatu havutukkien kenttäpyörösahauksessa. Acta Forestalia Fennica no. 86 article id 7186. https://doi.org/10.14214/aff.7186
English title: The quantity and quality of the sawing yield in sawing coniferous logs with circular saw.

The aim of the study was to find out the ratio of raw wood consumption and the quantity and quality of the sawing yield using circular saws. The unit of study was one single log, the Norway spruce logs were divided into two grades and Scots pine logs in three grades. The principal material of the study was collected in 1950-51 using four types of saws of type EKA-50. The data consisted of 1,690 logs.

On the basis of the material, the efficiency of centre-piece sawing was 63.9% of the technical volume. On the average, 32.1% was unsorted goods, 11.5% fifths, 19.1% sixths and 1.2% culls. For spruce, the efficiency was superior to pine, which means that the consumption of raw wood for preparation of one standard of sawn goods is smaller in spruce than in pine. The volume of side boards trimmed reached about 2% of the total log volume. The efficiency of sawing and the ratio of raw-wood consumption were calculated both on the basis of the estimated and actual volume of trimmed goods. The raw-wood consumption is particularly good in logs of small and large top-diameter.

Goods sawn with circular saw have a characteristic shape. They are thinner at the ends than in the middle parts, and the deviation from the correct measure is larger in the first than in the last end of the pieces. They are also wedge-shaped because of the first piece sawn is thinner than the second one. The deviation from the correct measure exceeded the allowance for shrinking in seasoning. The goods are often under sized even if surplus measure occurs. In goods sawn using frame saws, however, it was difficult to discover any deviation from the correct measure.

The PDF includes a summary in English.

  • Granvik, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive