Current issue: 53(2)

Under compilation: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'time consumption'.

Category: Research article

article id 1159, category Research article
Grzegorz Szewczyk, Janusz Michał Sowa, Włodzimierz Grzebieniowski, Mariusz Kormanek, Dariusz Kulak, Arkadiusz Stańczykiewicz. (2014). Sequencing of harvester work during standard cuttings and in areas with windbreaks. Silva Fennica vol. 48 no. 4 article id 1159. https://doi.org/10.14214/sf.1159
Highlights: In standard cutting stands and thinning areas with windbreaks there occurred three-activity operational cycles. In mature stands with windbreaks the occurrence of stable sequences supplemented with five-activity cycles was noted. Consequently, the operational time in post-disaster thinning stands should be increased by 55% whereas in mature stands it should be 30% longer in comparison with standard stands.
The aim of the study was to characterize repetitive cycles of harvester operation. The study was conducted in thinning, mature and post-disaster pine stands. The sequences of the activities characteristic of harvester operation were described as time series. In order to detect the cyclic variable structure of the analysed time series, the methodology of the single spectrum Fourier analysis was applied. In standard stands, post-disaster late-thinning stands and mature stands, the existence of stable operational cycles with the length of three activities was discovered while in post-disaster mature stands additional five-activity operational phases were noted. Described in this way, the lengths of the operational cycles of harvesters working in post-disaster areas were higher by about 55% and 30% respectively, as compared to standard thinning and mature stands.
  • Szewczyk, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest and Wood Utilization, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: rlszewcz@cyf-kr.edu.pl (email)
  • Sowa, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest and Wood Utilization, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: rlsowa@cyf-kr.edu.pl
  • Grzebieniowski, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest and Wood Utilization, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: wrzoswj@interia.pl
  • Kormanek, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest Work Mechanisation, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: rlkorma@cyf-kr.edu.pl
  • Kulak, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest and Wood Utilization, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: rlkulak@cyf-kr.edu.pl
  • Stańczykiewicz, University of Agriculture in Krakow, Faculty of Forestry, Institute of Forest Utilization and Forest Technology, Department of Forest and Wood Utilization, Al. 29-Listopada 46, 31-425 Krakow, Poland ORCID ID:E-mail: rlstancz@cyf-kr.edu.pl
article id 177, category Research article
Tuomo Nurminen, Heikki Korpunen, Jori Uusitalo. (2009). Applying the activity-based costing to cut-to-length timber harvesting and trucking. Silva Fennica vol. 43 no. 5 article id 177. https://doi.org/10.14214/sf.177
The supply chain of the forest industry has increasingly been adjusted to the customer’s needs for precision and quality. This has changed the operative environment both in the forest and on the roads. As the total removal of timber is increasingly divided into more log assortments, the lot size of each assortment decreases and the time consumed in sorting the logs increases. In this respect, the extra assortments have made harvesting work more difficult and affected the productivity of both cutting and forest transport; this has thus increased the harvesting costs. An activity-based cost (ABC) management system is introduced for timber harvesting and long-distance transport, based on the cut-to-length (CTL) method, in which the logistic costs are assigned to timber assortments and lots. Supplying timber is divided into three main processes: cutting, forest transport, and long-distance transportation. An ABC system was formulated separately for each of these main operations. Costs were traced to individual stands and to timber assortment lots from a stand. The cost object of the system is thus a lot of timber that makes up one assortment that has been cut, forwarded, and transported from the forest to the mill. Application of the ABC principle to timber harvesting and trucking was found to be relatively easy. The method developed gives estimates that are realistic to actual figures paid to contractors. The foremost use for this type of costing method should be as a tool to calculate the efficiency of an individual activity or of the whole logistic system.
  • Nurminen, Metsätoimisto Tuomo Nurminen, Joensuuntie 5 B 8, FI-41800 Korpilahti, Finland ORCID ID:E-mail:
  • Korpunen, Finnish Forest Research Institute, Parkano Research Unit, Kaironiementie 54, FI-39700 Parkano, Finland ORCID ID:E-mail:
  • Uusitalo, Finnish Forest Research Institute, Parkano Research Unit, Kaironiementie 54, FI-39700 Parkano, Finland ORCID ID:E-mail:

Category: Article

article id 4978, category Article
Paavo Valonen. (1977). Ajouraväli ja tekomiehen fyysinen kuormittuminen kuitupuun teossa. Silva Fennica vol. 11 no. 4 article id 4978. https://doi.org/10.14214/sf.a14832
English title: Strip road spacing and the physical strain put on forest workers during pulpwood cutting.

The physical strain put on forest workers and work time consumption during pulpwood cutting were compared when the bolts were stacked at the side of strip road, the strip road spacings being 15–25 m and 26–35 m, and when stacked at scattered points along the cutting strip.

When stacking at scattered points along cutting strip work time consumption was 17–21% and the heart rate 9–12% less than when stacking at the side of the strip road, strip road spacing being 15–25 m. When the strip road spacing was increased to 26–35 m, the time consumption increased by 18–30%, but the heart rate appeared unchanged. This result suggests that the forest worker compensates for increased physical strain caused by an increased stacking distance by changing his working technique and rate and by increasing the number of his breaks.

The PDF includes a summary in English.

  • Valonen, ORCID ID:E-mail:
article id 4890, category Article
Rihko Haarlaa. (1973). Maaston vaikutuksesta metsäteiden rakennukseen. Silva Fennica vol. 7 no. 4 article id 4890. https://doi.org/10.14214/sf.a14728
English title: Effect of terrain on forest road construction.

As a subproblem in the joint Nordic Terrain-Machine Project the requirements set by forest road construction on the terrain classifications were studied during the summer 1973 in ten operations, in which either a bulldozer or an excavator method was used.

The most important terrain factors of the ground factors affecting the construction time of the road base were the so-called depth index and the moisture content of the soil, and in addition to these the amount of stumps as a ground roughness factor. These variables explained, however, only a rather minor part of the wide variation in the construction output of the practical operations.

The PDF includes a summary in English.

  • Haarlaa, ORCID ID:E-mail:
article id 4874, category Article
Matti Kärkkäinen. (1973). Runkojen järeys puunkorjuun monitoimikoneiden ajanmenekin ennustamisessa. Silva Fennica vol. 7 no. 1 article id 4874. https://doi.org/10.14214/sf.a14704
English title: The size of stems in estimating the time consumption of processors.

The problem considered in this paper is how to analyse the usefulness of some average volume values of stems in predicting the average time consumption of some processors. In this connection, the usual arithmetic mean, the arithmetic mean weighted with volume and the geometric mean were used. The functions describing the dependence of time consumption per tree on the volume of the tree were obtained from previous studies, as were the stand properties.

The results were obtained with the aid of computer simulation techniques and the deterministic model described above. According to the results, the usual arithmetic mean is very applicable for predicting the time consumption. The geometric mean is nearly as good, or in some cases even better. However, as a rule its computation is much more tedious than that of the arithmetic average volume for the purpose.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
article id 4867, category Article
Matti Kärkkäinen. (1972). Näkökohta keskimääräisestä tuotoksesta metsätyötieteessä. Silva Fennica vol. 6 no. 2 article id 4867. https://doi.org/10.14214/sf.a14670
English title: A point of view on the average output in forest work science.

The paper deals with the concepts of time consumption and output in forest work science. When output is defined as the inverse of time consumption and vice versa, it is possible to show the important consequences in probability functions. For instance, it is not the same if the dependent variable in a regression analysis is output or time consumption. Also, the average differ depending on if they are based on the time consumption figures or on the average output.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive