Current issue: 53(3)

Impact factor 1.683
5-year impact factor 1.950
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles containing the keyword 'vuosiluston leveys'.

Category: Article

article id 5199, category Article
Pekka Saranpää. (1983). Puuaineen tiheyden ja vuosiluston leveyden vaikutus kuusen iskutaivutuslujuuteen Etelä- ja Pohjois-Suomessa. Silva Fennica vol. 17 no. 4 article id 5199. https://doi.org/10.14214/sf.a15182
English title: The influence of basic density and growth ring width on the impact strength of Norway spruce wood from Southern and Northern Finland.

Basic density and absorbed energy in impact bending were measured for 500 Norway spruce (Picea abies (L.) H. Karst.) samples from Northern and Southern Finland. Statistical analysis showed that the relationship between impact strength and basic density was significant and regression analysis showed that it was linear.

Furthermore, with constant density, the impact strength was higher in Northern than in Southern Finland. This was due to growth ring width: i.e. when density was kept constant the impact strength increased with decreasing growth ring width. In addition, when the growth ring width was kept constant, the basic density of wood was higher in Southern Finland than in Northern Finland.

The PDF includes a summary in English.

  • Saranpää, ORCID ID:E-mail:
article id 5182, category Article
Matti Kärkkäinen, Herman Hakala. (1983). Kuusitukin koon vaikutus sivulautojen taivutus- ja puristuslujuuteen. Silva Fennica vol. 17 no. 2 article id 5182. https://doi.org/10.14214/sf.a15098
English title: Effect of log size on the bending and compression strength of side boards in Norway spruce.

In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.

The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Hakala, ORCID ID:E-mail:
article id 5181, category Article
Matti Kärkkäinen, Olle Dumell. (1983). Kuusipuun taivutuslujuuden riippuvuus tiheydestä ja vuosiluston leveydestä Etelä- ja Pohjois-Suomessa. Silva Fennica vol. 17 no. 2 article id 5181. https://doi.org/10.14214/sf.a15097
English title: Effect of basic density and growth ring width on the bending strength of Norway spruce wood from southern and northern Finland.

A population consisting of 450 Norway spruce (Picea abies (L.) H. Karst.) samples was gathered from northern and southern Finnish wood. The static bending strength was affected greatly by the density of the wood. However, keeping the density constant, the bending strength was higher in northern than in southern Finnish wood. The reason was the effect of the growth ring width.

The basic density was affected by the growth rate. Keeping the growth ring width constant, the basic density was over 5 kg/m3 lower in northern than in southern Finnish wood. This result supports the earlier findings on the effect of latitude.

The PDF includes a summary in English.

  • Kärkkäinen, ORCID ID:E-mail:
  • Dumell, ORCID ID:E-mail:
article id 5128, category Article
Paavo J. Ollinmaa. (1981). Eräistä ojitetuilla soilla kasvaneen puun fysikaalisista ominaisuuksista. Silva Fennica vol. 15 no. 3 article id 5128. https://doi.org/10.14214/sf.a15069
English title: Physical properties of wood growing on drained swamps.

The objective of the investigation was to determine the differences between timber grown on a peatland before and after draining, in respect of compressive strength parallel to the grain, static bending strength and density. In addition, the characteristics of boundary zone between the wood formed before, and after the draining with wider growth rings was studied. 41 Scots pine (Pinus sylvestris L.) and 22 Norway spruce (Picea abies (L.) H. Karst.) trees were studied.

The compressive strength of pine usually decreased from the butt end upwards, but no trend was observed in spruce wood. In coniferous trees, wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior the draining. The density of pine as well as spruce increases as the width of the growth rings decrease up to a certain limit. The strength of the different kinds of wood seems to decrease from the butt end upwards.

In both species, the compressive strength parallel to the grain and the bending strength are lowest in such wood that contains exclusively wide-ringed wood formed subsequent to draining. Also, compressive and bending strength increase with decreasing width of the growth rings. The longitudinal shrinkage of compression wood in spruce was several times that of normal wood, and the bending strength was lower than that of normal wood particularly in spruce. The compressive strength parallel to the grain in dry condition was, however, higher than in normal wood both in pine and spruce.

The PDF includes a summary in English.

  • Ollinmaa, ORCID ID:E-mail:

Register
Click this link to register for Silva Fennica submission and tracking system.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles

Committee on Publication Ethics A Trusted Community-Governed Archive