First-thinning harvesting alternatives for industrial or energy purposes based on regional Scots pine stand simulations in Finland

Combining research into forest management stand conditions and wood supply chain processes has been missing from earlier forestry studies. There is a clear need to develop more cost-efficient small-diameter wood production, harvesting and transportation methods from first thinning, which could be used for either industrial or energy wood purposes. This study considers the total cost for small-diameter wood originating from young Scots pine (Pinus sylvestris L.) dominated stands. Pine pulpwood is the most harvested and most used roundwood assortment, use of which is expected to rise following new pulp-mill investments in Finland. In addition, utilisation of smalldiameter trees directly for energy purposes has been increasing steadily in recent years. The aim of the study was to determine the cost-reduction potential of alternative forest management options and supply chains for small diameter-wood in the regional case of South Savo in eastern Finland. The total costs of three distinct scenarios were studied on the basis of forest management, firstthinning harvesting methods, and transportation: 1) industrial wood, 2) delimbed energy wood, and 3) whole trees for energy purposes. The cost-reduction potential for energy-wood supply chains from first thinning was compared to the industrial supply chain. Small-diameter delimbed wood delivered straight for energy purposes was found to be the most cost-efficient as far as the total cost of the supply chain is concerned. More cost-efficient small-diameter wood processes can be found by linking forest stand simulations with supply chain analysis.


Introduction
Forest biomass is the most important source of renewable energy in Finland, which goes either straight from forests for energy purposes or through processing.Most forest-based bioenergy is generated from by-products of the forest industry (black liquor, bark, and sawdust).The rest of the wood-based energy is generated from forests directly for energy use (by means of firewood and forest chips).In 2014, solid wood fuels, consisting of industrial by-products (bark and sawdust) and direct energy use of forest chips, were used to generate 35.9 TWh of energy in Finland, from 18.7 million cubic metres of material (Ylitalo 2015).Consumption of forest chips, which are currently the country's most used solid wood fuel, came to 8.2 million (M) m 3 , from heating and power plants (7.5M m 3 ) and from small buildings (0.7M m 3 ) (Ylitalo 2015).Small-diameter wood accounted for the largest proportion of forest-based chips (3.7M m 3 ) (Ylitalo 2015).In addition, approximately 6.7 million cubic metres of firewood is estimated to be burnt in small fireplaces each year (Torvelainen 2009).Young Scots pine (Pinus sylvestris L.) stands represents the biggest source of small-diameter energy wood (2.5-5M m 3 year -1 ) in Finland (Anttila et al. 2013).However, it must be noted that the harvesting potential depends on the quality requirements and dimensions for industrial roundwood.In addition, pine pulpwood is the most harvested and most used sort of timber in Finland, with 15.9M m 3 utilised in 2012; it represented 46% of total pulpwood use (36.7M m 3 ) and 26% of all timber used (61.5Mm 3 ) (Ylitalo 2013).The Finnish national strategy for renewable energy specifies using 13.5 million cubic metres of forest-based chips annually by 2020 (Finnish Ministry of Employment and the Economy 2010).The material streams of small-diameter wood from first thinning for either the industrial use of chemical pulping or as forest chips for energy purposes constitute an interesting issue for study because, in line with demand, this material has been used for both purposes in recent years.
Cutting has proved to be the largest cost component in the supply chain, and stem size has been the factor explaining cost-efficiency (Laitila et al. 2010).The cost of cutting depends on stem size, defined either as tree diameter at breast height (DBH), expressed in centimetres, or as volume (in litres), whereas supply-chain costs from stand to mill are usually presented as a function of distance or procurement volume (Laitila et al. 2010;Jylhä et al. 2010;Nivala et al. 2015).Profitable mechanised energy-wood harvesting comes about through having a large enough stem size and thinning removal, which also increases the proportion of commercial wood (Jylhä et al. 2011;Pasanen et al. 2014;Petty and Kärhä 2014).
Single-grip harvester heads equipped with multi-tree handling equipment capable of cutting whole trees and multi-stem delimbed stemwood (Belbo 2011;Laitila et al. 2010) have proved to be the most competitive and flexible solution for harvesting young stands (Kärhä et al. 2009;Laitila and Väätäinen 2012;Petty 2014).A single-grip harvester head that is able to perform single-and multi-tree handling enables cutting trees into various assortments in accordance with market prices and product specifications, and this can increase the value of material recovered at the stand (Nurminen et al. 2009;Iwarson-Wide 2011;Spinelli and Magagnotti 2010;Tolan and Visser 2015).Cutting of whole trees costs less, but the cost difference diminishes as a function of tree size.The productivity of forwarding, transportation, and chipping is significantly higher for delimbed energy wood than for whole trees (Laitila and Väätäinen 2012).In addition, delimbed material produces uniform fuel stock devoid of needles and branches.This may be a benefit especially at some power plants with restricted ability to handle high levels of chlorine and alkali metals contained in the branch material (Nurmi and Hillebrand 2007).Bundling technology has been developed in order to rationalise the harvesting of small-diameter thinning wood and reduce transport costs via load compaction (Jylhä 2011;Jylhä and Laitila 2007;Laitila et al. 2009;Nuutinen et al. 2011;Nuutinen and Björheden 2015), but cost calculations have shown that bundling of whole trees displays poor cost-competitiveness (Jylhä 2011;Jylhä et al. 2010;Kärhä et al. 2009;Laitila and Väätäinen 2012).There is great potential to increase the cost-efficiency of wood harvesting by improving harvesting conditions and methods (Oikari et al. 2010;Bergström and Di Fulvio 2014).The two-pile cutting method has been used in integrated harvesting to separate industrial and energywood fractions in forests.Though integrated harvesting is an interesting way to decide between industrial and energy wood, the harvesting costs have been higher (Karttunen and Laitila 2015).One reason for this is the additional forwarding cost created in conveying the respective timber assortments to different piles (Kärhä 2011).At the same time, the optimal choice of harvesting and supply chain is strongly influenced by harvesting conditions, such as stem size, as indicated by DBH (Laitila 2008;Petty 2014).Using the method of gross-profit analysis, Petty (2014) found a delimbed-energy-wood supply chain to be the most profitable with stem sizes of 7-15 cm DBH when stationary chipping was utilised, whereas pulpwood production was the most profitable in operations with stem sizes greater than 15 cm.
Many harvesting, transportation and supply chain methods for small-diameter wood from first thinning have been studied and can currently be found in practical harvesting operations.The profitability of producing forest biomass for energy purposes, however, has been less studied (Ahtikoski et al. 2008;Heikkilä et al. 2009;Karttunen 2006).Forest-management opportunities should be considered in the innovation process for all aspects of forest-biomass supply chains, to reveal the cost-reduction potential (Karttunen 2015).The aim of the study was to find the most cost-efficient process for small diameter wood, which was determined by using the following three aspects: 1. Forest stand simulation and supply-chain analyses were linked, 2. The harvesting and transportation of industrial and energy wood from first thinning were compared, 3. Accurate stands from the regional case from South Savo (and South Karelia) in eastern Finland were used and compared to other regions of Finland.

Scenarios and formulas
Three alternative scenarios were studied on the basis of harvesting methods from first thinning (Table 1).The first scenario (Scenario 1), which was the baseline for the study, was based on industrial roundwood used for chemical pulping and sawn wood.Other scenarios were based on energy wood harvesting from first thinning, with the second (Scenario 2) representing harvesting of delimbed energy wood and the third (Scenario 3) representing whole trees used for energy purposes.The scenarios varied in their cutting diameter and moisture content at first thinning removal.In addition, forest growth differences were determined for each scenario.The cost-calculation procedure has been used in an earlier study by Karttunen and Laitila (2015).In this study, alternative data, cases and scenarios were determined.Firstly, the bare land value (BLV) for alternative forest-management regimes was measured for all plots, with the income from first thinning in scenarios 2 and 3 set to produce the same BLV as the baseline (Scenario 1) (Eq.1). where: BLV n = bare land value at stand level for Scenario 1, Scenario 2, and Scenario 3, € ha -1 CI i = cutting income at stand age i, € ha -1 t = final cutting SC ik = silvicultural cost for activity k at stand age i, € ha -1 k 1 = cost of forest regeneration (year 0) k 2 = cost of pre-commercial thinning (year 10 if not known) n = time of pre-commercial thinning i = time in years elapsed since the start of the simulation r = interest rate, 3% Secondly, cutting, forwarding and truck transportation were included in the supply chain analysis, in a manner consistent with earlier studies and formulas (Table 2).Finally, the costreduction potential of the other scenarios was compared to the baseline (Scenario 1) (Eq.2).

( )
where: Cost -reduction (%) jn = cost-reduction percentage for the first thinning related to scenario j (j = 2 or 3) and management plot n (n = 1,2,3, …, 18) relative to Scenario 1 (baseline, BL) Cost reduction (%) jn < 0 indicates absence of cost reduction for jn Cost reduction (%) jn > 0 indicates presence of cost reduction for jn C = share cost, € m -3 i = share of estimated stumpage price, harvesting cost, and transportation cost Table 2. Productivity (PMH 15 = Productive machine hour excluding delays longer than 15 minutes), payload (m 3 = solid cubic meter) and cost parameters (€ h -1 ) used in the study scenarios.

Stand data and simulation
The study focused on 15 original stands representative of typical Scots pine stands in the regional case of South Savo (and South Karelia) in eastern Finland.These provided 'the regional case' supply data.Stand data for the regional case came from an accurate plot measurement made in the 11th National Forest Inventory (2009-2013) and plots were selected according to the young Scot´s pine pure or dominated stands before first thinning, with a density between 1000 and 5000 trees per hectare.In addition, the study examined three average stands (with a density of 3000 trees ha -1 ) from southern (1300 dd.'day degrees'), central (1100 dd.), and northern Finland (900 dd.) (Fig. 1, Table 3).The day degrees (dd.) calculation is the growing days multiplied by the average temperature of each day.For all stands, the site type was dryish heath (VT, Vaccinium vitis idaea), and the density of trees varied between 1140 and 4900 trees per hectare.
The MOTTI forest-stand simulator was used in the study.The MOTTI simulator has been designed to simulate and analyse stand development for alternative forest-management regimes in various growth conditions with all major tree species in Finland (Hynynen et al. 2005).It has been implemented via multi-language programming that includes the coupling of models for predicting forest growth with integrated process-based models (Salminen et al. 2005).The input to MOTTI can be either tree-or stand-level data, with each stand simulated separately.The simulation period can be defined as one to five years.Growth and yield models in MOTTI are reliable only in Finnish or similar conditions, but upon construction of a new set of models, the system could be adapted for application elsewhere (Salminen et al. 2005).This simulator's performance with young Scots pine stands has been assessed by Ahtikoski et al. (2004), Huuskonen (2008), and Huuskonen and Ahtikoski (2005), and in mixed stands by Hynynen et al. (2002).Mäkinen et al. (2005) evaluated the reliability of its growth predictions for intensively managed Scots pine stands, with the results indicating that the MOTTI simulator can be applied as an analysis tool to compare stand-management alternatives in Finnish conditions.In this study, the growth of young pine-dominated stands with alternative growth and density conditions was modelled for the whole rotation.The MOTTI application, version 3.2 (see http:// www.metla.fi/metinfo/motti/),was used in line with silvicultural recommendations (Äijälä et al. 2014;Hyvän metsänhoidon… 2006); thinnings were based on basal area models, and regeneration was based on mean diameter or age.The simulation began with a stand age that varied between 11 and 35 years for stands in the regional case and averaged 23 (southern), 27 (central), and 34 (northern) years for the other region-level assessment.The starting point adopted for the simulation represented the number of trees after pre-commercial thinning but before first thinning.In young stands with more than 4000 trees per hectare, pre-commercial harvesting to 3500 trees a hectare was implemented at the beginning of the simulation.Pre-commercial thinning was assumed to be done in the tenth year in the regional case (when there was no evidence to the contrary) and in southern Finland, in the 15th year in central Finland, and in the 20th year in northern Finland.There were 45 simulations (three scenarios × 15 plots) based on the stands from the area of the regional case and nine (three scenarios × 3 plots) based on the other average region-level.The average region level stands were based on the earlier study results (Karttunen and Laitila 2015), with the exception of novel whole-tree simulations.
The profitability of forest management as a silvicultural system was examined through comparisons of the discounted net revenues and costs associated with various management regimes.The discount interest was kept constant at 3%.Average stumpage price was arrived at via an index-based increase from actual stumpage prices for a statistically relevant time period, with stumpage prices broken down among first thinning, other thinnings, and final cutting (2011-2014) in the regional case, whilst the trend price for 2013 was used for southern, central, and northern Finland.The latter was based on real stumpage prices for an intermediate time period (1995)(1996)(1997)(1998)(1999)(2000)(2001)(2002)(2003)(2004)(2005)(2006)(2007)(2008)(2009)(2010)(2011)(2012).
For all areas, the average soil-preparation cost was 194 € ha -1 and the regeneration cost 210 € ha -1 (for sowing) at the start of the rotation (year 0) and the cost of pre-commercial thinning was set at 399 € ha -1 (Metsätilastotiedote 2013).There was assumed to be no difference in operations between alternative scenarios before first thinning.
Table 3. Stand characteristics of plots in the alternative areas of Finland ('Regional case' = South Savo and South Karelia), with different stand density classes.N = number of stems per hectare, G = stand basal area (m 2 ha -1 ), D g = mean diameter at breast height (cm), H g = mean height (m), T = age (years), and V = volume (m 3 ).

Supply-chain analysis
The average costs were presented relative to distance and categorised by stand density: above or below 3000 trees per hectare before first thinning.The average costs for the first-thinning supply chains were presented in euros per solid cubic metre.Minimum tree length for cutting was set to 3 m, and the other basic dimensions were determined by the MOTTI stand simulator.For average-cost analysis, the extent of long-distance transportation was set to 100 km, but distances of 10-150 km were shown in cost curves.The supply chain process for each scenario was kept constant: cutting of first thinning, forwarding to roadside, and truck transportation to the plant terminal.The chipping cost associated with energy wood was not considered in this study.
The main difference between the supply-chain scenarios lies in the removals and the functioning of operations, wherein industrial wood must be transported fresh to the end-use facility, while energy wood is usually dried by the roadside.Wood weight was assumed to vary between scenarios, which may have an influence on transportation payload and costs.The basic density for Scots pine in the study was set to 400 kg m -3 (Lindblad and Verkasalo 2001).The average moisture content assumed for small-diameter delimbed energy wood was 35% (615 kg m -3 ), for whole trees 45% (727 kg m -3 ), and for industrial wood 55% (889 kg m -3 ) at the roadside before long-distance transportation.The moisture content of fresh pine wood in practice has varied with the month of cutting and has been, on average, between 55% and 57% (Gislerud 1974;Hakkila 1962;Hillebrand and Nurmi 2001;2007;Kärkkäinen 1976;Nurmi 1999;Nurmi and Lehtimäki 2011).Normally, the moisture content of energy wood varies greatly with the drying time, seasonal differences (Lindblad et al. 2013), and storage conditions (Nurmi and Hillebrand 2007).In our study, the moisture content of small-diameter wood, which influences the payload in transportation, was kept constant across the individual scenarios.The assumed moisture content of whole trees and delimbed energy wood used in the study was not based on exactly measured data.
The productivity assumed for cutting of industrial roundwood, delimbed stemwood, and whole trees by means of the multi-tree processing technique was based on a study by Laitila and Väätäinen (2013).In the multi-stem cutting time-consumption model, productivity was explained in terms of tree/stem volume (dm 3 ) and harvesting intensity (stem or tree number per hectare).The effective forwarding productivity for industrial roundwood and delimbed enegywood were calculated via the model of Kuitto et al. (1994) and the functions of Laitila et al. (2007) were applied for forwarding of whole trees.The total length of the strip-road network at the stands was assumed to be 600 m ha -1 , based on an average strip-road spacing of 20 m (Niemistö 1992).The forwarding distance was 300 m (e.g., Kärhä et al. 2009;Laitila 2012;Laitila and Väätäinen 2012).The forwarder payload was set to 11 m 3 for industrial wood, 10 m 3 for delimbed energy wood, and 6 m 3 for whole trees.The effective time productivities of cutting and forwarding were converted into gross effective time productivities with the coefficients 1.393 and 1.302 (Jylhä et al. 2010;Laitila and Väätäinen 2012).The hourly-cost data for forest machines were obtained from a study by Laitila et al. (2015).The following operating hourly costs were used: 102.30€ h -1 (0% VAT) for a harvester equipped with multi-tree handling accessories and 81.00 € h -1 (0% VAT) for a forwarder.
Multi-stem-harvested industrial wood and delimbed energy wood were transported by a timber truck with a trailer having a 76-tonne maximum legal weight (Anttila et al. 2012), for a maximum payload of 51 tonnes when the weight of an empty truck was set to 25 tons.The road-transport times were composed of driving without a load, driving with the load, and the terminal times (incl.loading, unloading, waiting, and 'auxiliary time').The time consumption of driving, with full and empty loads both, was calculated as a function of transportation distance in line with the speed functions of Nurminen and Heinonen (2007).Whole trees were transported by truck, with the payload set to 30 m 3 (Laitila and Väätäinen 2012).The payload of the 5-5.5 meter long industrial roundwood and delimbed energy wood were set to 57 m 3 and 67 m 3 (Korpilahti 2013) respectively.The data for vehicles' hourly operating costs came from the study by Laitila et al. (2015): a timber truck's hourly use cost was 72.00 € h -1 (0% VAT), and a whole-tree truck's was 66.00 € h -1 (0% VAT).
The delimbed-energy-wood supply chain (Scenario 2) had the highest cost-reduction potential, coming to, on average, 10.0% (4.00 € m -3 ) relative to the baseline in the regional case.The cost-reduction potential of the delimbed-energy-wood supply chain showed a decrease in the analysis of the three regions with transfer from south to north as follows: southern Finland 9.1% (3.50 € m -3 ), central Finland 8.4% (3.30 € m -3 ), and northern Finland 7.8% (3.30 € m -3 ).Total costs in the various scenarios are presented in relation to distance (Fig. 3).Scenario 2, using delimbed energy wood, represented the lowest total cost in every scenario and area examined.
The forest-stand plots of the regional case were grouped by stand density: under 3000 or over 3000 trees per hectare (Fig. 4).One can see that delimbed-energy-wood supply chains (Scenario 2) had the lowest total cost, and that cost did not depend on stands' density as much as seen in the other scenarios.The cost-reduction potential from denser forests (>3000 trees/ha) is 4.3% (1.60 € m -3 ), on average, when Scenario 2 is compared to the baseline (Scenario 1) with a traditional forest-management stand density (<3000 trees/ha).If Scenario 2 for denser forests is compared to the baseline (Scenario 1) for denser forests, the cost-reduction potential is 13.6% (5.80 € m -3 ).

Removal of forest biomass from first thinning
Removal of forest biomass varied according to plots and scenarios.Whole trees removed from the first thinning constituted 59.6 m 3 ha -1 , on average (Scenario 3), and the delimbed-energy-wood scenario produced, on average, 50.4 m 3 ha -1 (Scenario 2), whereas the scenario for industrial wood (Scenario 1) had the lowest average removal, 44.5 m 3 ha -1 in the regional case (Fig. 5).The average removal volumes for scenarios 1, 2, and 3, were 44.1, 51.0, and 61.3 m 3 ha -1 , respectively, in southern Finland; 39.6, 45.1, and 54.6 m 3 ha -1 in central Finland;and 36.8,41.8,and 49.8 m 3 ha -1 Fig. 4. Average total supply-chain costs in the regional case of South Savo (and South Karelia) (chipping cost is not included) plotted against distance and the density of the stand (>3000 trees ha -1 and <3000 trees/ha, in € m -3 ). in northern Finland.Forest management with whole-tree harvesting (Scenario 3) had the highest annual removal rate, at 5.7 m 3 ha -1 year -1 in the regional case, with the other figures being 5.5 m 3 ha -1 year -1 for southern Finland, 3.6 m 3 ha -1 year -1 for central Finland, and 2.1 m 3 ha -1 year -1 for northern Finland (Fig. 6).The annual removal rate refers to the total cutting removals of forest biomass divided by the rotation period.
Fig. 6.Total annual removal of sawn wood, pulp wood, and energy wood from the whole forest rotation (m 3 ha -1 a -1 ) in the alternative scenarios studied in the regional case of South Savo (and South Karelia), and in the other areas of Finland.

Estimated stumpage price of small-diameter trees
The estimated stumpage price demanded by forest owners so as to achieve the same economic result as at baseline (Scenario 1) for first-thinning removal varied by case and scenario, as shown in Table 4. Average energy-wood stumpage prices were lower (1.30-3.00€ m -3 , 9-25%) than at baseline (Scenario 1) in every alternative case.Estimated stumpage prices in the energy-wood scenarios (Scenarios 2 and 3) in the regional case were lower, but featured more variation than with the baseline scenario.It is notable that the minimum stumpage price of energy-wood scenarios (Scenarios 2 and 3) was 6.70-7.50€ m -3 , which is around half (47-52%) the average stumpage price at baseline (Scenario 1) in the regional case.

Discussion and conclusions
The study determined alternative supply chains for small-diameter wood from Scots pine stands in Finland.The goal was to find the most cost-efficient way of producing and delivering smalldiameter wood in the regional case area of South Savo (and South Karelia) in eastern Finland.Forest stand simulations were combined with supply chain analysis to determine the option with the most potential for first thinning harvesting and transportation of young Scot´s pine stands.The study showed that delimbed small-diameter wood supplied for energy purposes was more cost-efficient than for industrial wood or corresponding energy use of whole trees in all areas and transport distances of Finland, as indicated by the total supply-chain costs.
The economics of forest-resource systems should be studied comprehensively and sitedependently in relation to biomass use, to enable an assessment of the optimal use of forest biomass.Forest-stand location is an important cost element, especially if the forests are far from user sites.Energy wood can usually be used locally, while the user facilities of industrial wood can be situated further away.The average long-distance transport of roundwood by truck is 108 km in Finland (Strandström 2014).Nonetheless, the total supply-chain cost curve produced in our study showed lower costs for delimbed energy wood than with the industrial-wood supply chain at all distances especially due to lower moisture content, which enabled bigger payloads.
The study showed that energy wood from first thinnings can be produced cost-effectively even at around half the stumpage price compared to traditional industrial wood in the regional case.If energy wood is cost-efficient to grow at a considerable lower cost than industrial wood, it can change the optimal way of managing forests and the use of wood.Competitiveness and the ability to pay for energy wood will define the potential use compared with either industrial wood or other fuels, such as fossil fuels.However, the additional costs of energy wood may have an effect on cost-competitiveness.It must be taken into consideration that we did not factor into the study the costs of drying energy wood, further storage, and interest costs, or the cost of dry-material losses for raw material, or the chipping cost of wood material.
Table 4.Estimated average stumpage prices for each scenario and area ('Regional case': = South Savo and South Karelia, 'Regional areas': 'S F' = southern Finland, 'C F' = central Finland, 'N F' = northern Finland).Minimum (min) and maximum (max) values of stumpage prices has been presented in the regional case.It must be noted that it is not only the profitability of forest management and supply-chain costs that matter; the price level at the user-site gate is important too.Comparable gate-price estimates should be subjected to gross-profit-margin analysis (Petty 2014) or examination of the ability to pay for wood (Jylhä et al. 2010).Regrettably, the gate price paid at the user site for industrial wood is not available as statistical data and is seldom presented even at a theoretical level.The current plant prices for forest chips, on the other hand, are available as statistics.However, forest chips have been supported by the state compared to fossil fuels, which make it difficult to compare with other uses.In this study, the stumpage price of energy wood from first thinning was estimated in relation to industrial wood prices and the baseline of traditional forest management so as to redress the effects of statistical unavailability for longer periods.Also, subsidies paid for small-diameter-wood supply from early thinnings have led to confusion surrounding the stumpage prices of energy wood.
The study involved a comparison of the economic results for given plots producing industrial vs. energy wood from first thinning.Two aspects must be separated when analysing the results.Firstly, we explored forest management and its profitability over a time horizon.Secondly, we studied alternative first thinning harvesting methods in constant time.Usually, the larger the removal at first thinning, the lower the net stumpage price needed for the same economic effect in constant time.But when analysing the profitability of alternative forest management regimes over a time horizon, the harvesting method can significantly influence results.Unless whole-tree harvesting yielded the largest removal in this study, removing this forest biomass out of the forest stand influenced later forest growth and decreased the profitability of forest management and further increased the stumpage price.The reason for decreased profitability is due to nutrient loss from whole tree harvesting (Palviainen and Finér 2012), which is already included in the MOTTI stand simulator´s growth models.In addition, the whole-tree supply chain was, in fact, the most expensive option of the alternative supply chains, because of the low bulk density of forwarding and transporting whole trees.

Fig. 1 .
Fig.1.The data points from the study, with highlighting for areas in the regional case of South Savo (and South Karelia) in eastern Finland.

Fig. 5 .
Fig.5.Total first thinning removal of scenarios (Scenario 1: Industrial wood; Scenario 2: Delimbed energy wood; Scenario 3: Whole tree) and plots (plot number 1-18) in the regional case of South Savo (and South Karelia), and in the other regional areas of Finland (S F = southern Finland, 1300 dd., C F = central Finland, 1100 dd., N F = northern Finland, 900 dd.).

Table 1 .
Main scenarios of the study.