Dimitris Athanassiadis

Residual stand damage following cut-to-length harvesting operations with a farm tractor in two conifer stands.

Athanassiadis D. (1997). Residual stand damage following cut-to-length harvesting operations with a farm tractor in two conifer stands. Silva Fennica vol. 31 no. 4 article id 5639. https://doi.org/10.14214/sf.a8541

Abstract

The objectives of this study were to record residual stand damage during harvesting operations and evaluate the influence of factors such as distance of the tree from the strip road, machine parts, operational phase, on the occurrence of tree wounds. The machine was a farm tractor equipped with a crane mounted on the front axle and a single grip harvester head. The study was carried out in two stands located in Southeast Sweden. Stand 1 was a 30-year-old Norway spruce (Picea abies (L.) H. Karst.) plantation on an afforested pasture while stand 2 was a 90-year-old mixed stand of Norway spruce, Scots pine (Pinus sylvestris L.), birch (Betula pendula Roth) and aspen (Populus tremula L.).

The mean damage percentage was 6.3% for the first stand and 6.5% for the second stand. Sixty-five percent of the wounds were less than 50 cm², with 91% of the damage occurring on the stem and 91% of the damage on or below the root collar. Sixty-six percent of the wounds produced by the stem under processing or by the harvesting head while only 10% of the wounds were produced by the tractor wheel. Damaged trees were distributed evenly in the crane reach zone. Significant differences were found between rut depths after one, two, four and six passes of the tractor in stand 1.

Keywords
harvesting; logging; thinnings; Sweden; farm-tractors; stand-damage

Published in 1997

Views 2703

Available at https://doi.org/10.14214/sf.a8541 | Download PDF