Two felling methods in final cutting of shelterwood, single-grip harvester productivity and damage to the regeneration
Glöde D., Sikström U. (2001). Two felling methods in final cutting of shelterwood, single-grip harvester productivity and damage to the regeneration. Silva Fennica vol. 35 no. 1 article id 604. https://doi.org/10.14214/sf.604
Abstract
In order to find an efficient and careful way of final-cutting shelterwoods, two felling methods, in a single-grip harvester system, were compared with respect to productivity and damage caused to the regeneration. The shelterwood (140–165 m3/ha) consisted of Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.) and the natural regeneration (9530–11 780 seedlings/ha) mostly of Norway spruce. Treatments were: (i) conventional felling on both sides of the harvester striproad, preferably in blanks of the regeneration; (ii) felling of the trees top-end first into the striproad using a method named “tossing the caber”. Both treatments included forwarding after felling. Conventional felling had a non-significantly higher productivity (27.4 m3/E15–h) and lower cost (25.9 SEK/m3) than tossing the caber (26.1 m3/E15–h and 27.2 SEK/m3). However, tossing the caber was significantly more efficient in the felling and processing of pine trees compared with conventional felling. The mean proportions of the disappeared and damaged seedlings were approximately 40% after both treatments. The logging-related damage to the regeneration decreased with increased distance to the striproad in the tossing the caber treatment but not in conventional felling. The conclusions were that there were no differences between the treatments regarding productivity, cost and total damage to the regeneration in mixed conifer shelterwoods but that tossing the caber could be a more productive method than conventional felling in pine dominated stands. Tossing the caber could also be beneficial at a regeneration height of 2–3 m since at this height the damage to the regeneration seems less than at conventional felling.
Keywords
silviculture;
time study;
cost;
forest operations;
felling technique;
logging-damage
Received 24 March 2000 Accepted 9 January 2001 Published 31 December 2001
Views 3430
Available at https://doi.org/10.14214/sf.604 | Download PDF