Håkan Lindström

Intra-tree models of juvenile wood in Norway spruce as an input to simulation software

Lindström H. (2002). Intra-tree models of juvenile wood in Norway spruce as an input to simulation software. Silva Fennica vol. 36 no. 2 article id 542. https://doi.org/10.14214/sf.542

Abstract

Juvenile wood found in the first 5–25 growth rings of a conifer has a structure and properties that differ from mature wood. Juvenile wood is therefore said to influence processing and the end-use of sawn products. Consequently, models describing the juvenile wood content, within and between trees, could be useful in improving the utilisation and value of wood as an industrial raw material. The objective of the present study was to develop juvenile wood models, based on Norway spruce trees, which could be used within a model system for conversion simulation studies. Nineteen stands of Norway spruce (Picea abies [L.] Karst.) were selected throughout Sweden. Based on DBH, two small, two medium, and two large diameter timber trees were taken from each stand. DBH varied between 180–470 mm, tree height between 17–34 m, and total age between 51–152 years. Each selected tree was cross-cut into logs; discs were prepared from the large end of each log and from the top end of the top log. Image analysis was used to determine growth ring development on sampled discs. Using tree and growth variables, the juvenile core radius and the logarithmic value of juvenile wood percentage were modelled. The two models had an R2Adj of 0.71 and 0.88 respectively.

Keywords
Picea abies; image analysis; juvenile wood; growth conditions

Received 6 March 2000 Accepted 16 January 2002 Published 31 December 2002

Views 2538

Available at https://doi.org/10.14214/sf.542 | Download PDF