Bror-Anton Granvik 
Havusahatavaran valmistus kenttäpyörösahalla : työtieteellinen tutkimus
Granvik B.-A. (1967). Havusahatavaran valmistus kenttäpyörösahalla : työtieteellinen tutkimus. Acta Forestalia Fennica vol. 84 no. 3 article id 7184. https://doi.org/10.14214/aff.7184
English title: The preparation of coniferous sawn goods using circular saws. A work studyAbstract
The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.
The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin.
The PDF includes a summary in English.
Original keywords
sahatavara;
aikatutkimus;
sahaus;
kenttäpyörösahaus;
havusahatavara
English keywords
time study;
sawing;
sawn goods;
circular saw;
softwood timber
Published in 1967
Views 5767
Available at https://doi.org/10.14214/aff.7184 | Download PDF
Send to email
