Articles containing the keyword 'sahatavara'

A mathematical model was developed for determining the value of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) stems on the basis of sawing and pulping. The model was based on selling prices of sawn goods, pulp and other products as well as processing costs. Sawing was applied to large-dimension parts of stems and pulping to other parts and small stems. Bark and other residues were burned. The quality of pine stems was described by the distance of the lowest dead branch. In spruce only stem size affected the quality-

According to the results, the size of stem affects considerably the value of pine stems and clearly that of spruce stems. The main reason is an increase in the productivity of frame sawing as the stem size increases. In pine another factor is the higher price of sawn goods. The effect of pulp price increases as the stem size decreases. Even in large sized stems the effect of pulp was notable as the value of chips and saw dust was determined on the basis of product values in export. The competition ability of mechanical pulp was greatly affected by the price of electricity.

The PDF includes an abstract in English.

• Kärkkäinen, E-mail: mk@mm.unknown

Totally 653 battens and planks sawn from butt logsof Scots pine (Pinus sylvestris L.) were chosen from 3 saw mills. The sawn goods were sorted according to normal sorting principles. In order to determine growth rate in the youth, the mean value of the average ring width was measured at the butt end at various distances from the pith.

The average ring width increased as the quality of the sawn goods decreased. The difference between the quality classes in ring width was measured between 2 and 4 cm from the pith. As the size of sawn goods, and, simultaneously, the log size increased, the average ring width increased in a given quality class. Research reinforced previous results, in which slow diameter growth of young Scots pines has been shown to reflect the good quality of sawn goods.

The PDF includes a summary in English.

• Halinen, E-mail: mh@mm.unknown

A test sawing was made of 807 Scots pine (Pinus sylvestris L.) saw logs of varying size and quality. The most important knot characteristic affecting the value of sawn goods was the diameter of the thickest dry knot. The new minimum requirements for pine logs were proposed on the basis of top diameter of the log and the diameter of the thickest dry and living knot.

The PDF includes a summary in English

• Kärkkäinen, E-mail: mk@mm.unknown
• Halinen, E-mail: mh@mm.unknown

In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.

The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.

The PDF includes a summary in English.

• Kärkkäinen, E-mail: mk@mm.unknown
• Hakala, E-mail: hh@mm.unknown

The present paper presents studies on the influence of some relatively common defects of Scots pine logs in Northern Finland on both the sawing yield and on the quality of the sawn goods. The study was based on test sawing of 25 logs for each of the defects (upright limb, heart shake and various kinds of wounds and scars) at Karihaara sawmill. The yield was graded into grades used for export timber according to the system of the sawmill. The proportion of the different export grades (U/S), fifths, sixths and culls) were used as characteristics together with the ratio of raw-wood consumption expressed as cu.ft/std.

Upright limbs occurring in a piece of sawn timber was shown to lower its quality to fifth grade in 43.5%, to sixth grade in 46.8% and to the category of culls in 6.5% of all cases. Only 3.2% of the cases the piece remained in U/S-grades. The size of the upright limb was the most important factor lowering the quality and affecting the ratio of raw-wood consumption.

Heart shakes are relatively common defects in pine logs deriving from over-mature trees. The quality-decreasing influence on the sawing yield depends clearly on the length of the shake in the cross-section. The same characteristics also decreases the ratio of raw-wood consumption. In addition, twisting and star shakes are considerably more harmful than straight ones. If rot occurs in connection with shakes, the places marred by the shakes are only capable of yielding sixth-grade sawn goods or culls.

Scar encountered in logs affect the sawn yield and its quality to quite a varying degree, but these defects themselves may also vary considerably both in size and quality. The length of the scar is highly significant as a quality-decreasing factor. If, in addition, rot is encountered, the defect is of a severe nature.

The PDF includes a summary in English.

• Heiskanen, E-mail: vh@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

Quality grading has been rarely used in pricing of saw logs due to lack of knowledge on how the quality of logs affects the value of the sawn wood. This presentation discusses the subject based on unpublished data professor Ilmari Vuoristo collected in 1930s on effects of timber grading on the quality and value of sawn wood. The quality classification developed by professor Vuoristo is presented.

• Heiskanen, E-mail: vh@mm.unknown

Silva Fennica Issue 69 includes presentations held in 1948-1950 in the fourth professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.

This presentation describes the grading of sawn timber for export and domestic use, and suggests improvements to grading of the sawn products in the saw mills to better answer the needs of export.

• Siimes, E-mail: fs@mm.unknown

The issue 39 of Silva Fennica includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level.

This presentation describes the quality of timber and coniferous forests in the point of view of saw industry.

• Vuoristo, E-mail: iv@mm.unknown

The objectives of the paper were to find out structure of the sawing time when using field circular saws, influence of the different factors on the sawing time and its structure, average sawing time per unit of raw material and sawn goods, and the fundamentals for the creation of an equitable system for the determination of the basis of payment in sawing work. The observations of the time study were made on both a single log and a work period basis. The material was collected using four saws of different brands.

The results showed that the season when the work was done, and top diameter of the logs to be sawn affected the constant times included in the total sawing time and the time used for sawing of center pieces. While the tree species did not affect the constant times, the grade of the logs of different tree species did have effect, especially in winter sawing. The factors affecting the different phases of the work are described in detail. The length of sawing time was longer in the winter than in the summer. The preparatory jobs in sawing required in average 82 cmin per log, and the time increased with increasing top diameter. The actual sawing is the most time-consuming part of the work, it took in average 132 cmin. 

The PDF includes a summary in English.

• Granvik, E-mail: bg@mm.unknown

This study concentrates on claims made against Finnish shippers or referred to arbitration by foreign buyers. The material is collected from two inquiries on claims and arbitrations, sent by the Finnish Sawmill Owners’ Association to Finnish sawmills engaged to exportation in 1954 and 1958.

On average the claims concerned about 5% of the sawn goods exported from Finland. They affected about 3% of the deliveries from the large sawmills, 10% of the deliveries of medium-sized sawmills and 15–20% of the small sawmills. In large consignments of raw material, variations in quality are not so marked as in smaller ones. Also, the grading of goods is stricter in the larger sawmills, and as they have well-established business relations, they have better opportunities to select goods with a view to demand of the buyer and the marketing areas.

The ratio of goods claimed was least in exports to remote countries, on the Western European markets in exports to Great Britain and the Netherlands. In Belgium, the ratio was high. In 1954 and 1958 approximately 12% of the claims were referred to arbitration. The bigger the sawmills, then on average the smaller the ratio of cases of arbitration in the number of claims. In Belgium, disputes have had to be settled by arbitration most frequently. Over 90% of the claims were made because of defects in quality or condition. About 5% were in respect of the specification of dimensions, and only 5% were related to other reasons than the good themselves. The sums paid for claims connected to the goods in 1958 represented only 54% of those demanded by the buyers. It would perhaps be advisable to consider the formulation of generally acceptable rules of the grading of export timber according to categories of shippers with definition of the minimum standard for each grade.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The investigation examines export sales of Finnish sawn softwood sales in 1951-1958, concentrating on the volume of the sales. The material was collected from the archives of Finnish Sawmill Owner’s Association and the Finnish Sawmill Control Organization and the annual reports of the former. Correlation analysis was used in assessing the interdependence of the monthly sales volume and the price, and opening sales and the total sales volume of the year.

A slightly negative correlation was seen between the sale price and the monthly sales volume. Goods sold at under average prices are more abundant than goods sold at over average prices. Generally, with a rising price trend, the annual sales volume increased, but with falling prices the situation was reverse. The sales volume has been dependent on the business cycle development of prices. There was positive correlation between the opening sales and the total sales quantity for the year. The sales volume was at its maximum in the period between November and January, and at the minimum between March and September.

The time of the sales made to different countries differed little judged by quarterly statistics. It seems that the major shippers have generally concluded opening sales first. Northern Finnish shippers and the small shippers of Southern Finland have sold proportionately least during the last quarter. In general, the poorer the qualities in question the smaller on an average the proportion of opening sales but the greater the share of clearance sales.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The aim of the investigation was to estimate the changes in the price ratios of different tree species of sawn timber, timber sizes and qualities, the ratios of the prices obtained by different shippers and from different countries, and their changes, especially the trends and business cycles. The data can be utilized in the organization of sawing and the drawing up of the price scales. The price ratios were calculated by taking 100 as the basic quantity and calculating the values for the other quantities accordingly, the values are called price indices. The data is collected from the sales reports in the archives of the Finnish Sawmill Owners’ Association.

Comparing the ratios of the basic prices, the prices of unsorted pine goods by shipper B (the leading marks of Northern Finland), were considerably higher than the others. The North Finnish pine goods are of the best quality in Finland. The price differences between the other shippers were small. The prices of unsorted spruce goods differed very little with different shippers. In some years the basic prices obtained for pine from different countries showed considerable differences although, in the overall view, the differences were small.

In the leading marks of Northern Finland, the differences between pine and spruce prices was greater than the other price differences. The quality of pine logs in Northern Finland is extremely high. During the periods of prosperity, the price difference between pine and spruce was relatively smaller than during depression. With spruce goods, the relative price difference for the qualities is smaller than with pine goods. For the both species the relative price differences diminished with the increase in the basic price. In the broadest sizes of unsorted pine goods, the price difference of the inch class is much bigger than in the small sizes. This is true especially for boards. The relative price difference between boards and battens increased distinctly with the advance in the basic price. A similar, though not as clear change took place in the price ratio of board and 7” sizes. The price differences between battens and boards are much smaller for spruce than for pine. The trends of the price indices of the different sizes show from the middle of 1920s and as far as the 9” u/s pine sizes very gentle, and in regards of the corresponding spruce sizes, a fairly sharp rising tendency.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The objective of the investigation was to study the trends and fluctuations in the composition of sawn goods, changes due to business cycles, and casual fluctuations. The subject is confined to sawn softwood export to Great Britain, the Netherlands, Belgium and France (The North Sea countries) in 1920-1952. The data was based mainly on statistics of the Board of Customs, Series of Foreign Trade, Finnish Sawmill Owner’s Association and the Finnish Official Statistics.

The North Sea countries took 75-85% of the sawn softwood exported from Finland before World War II, and 50-70% of the quantity exported since the war. Sawn softwood export from Finland is almost exclusively long and small-dimension timber. The composition of the export from Finland to the North Sea countries was defined already during the 1900^th century, and no big chances were observed even during the period of 1920-1952. The only definite trend was decrease in the proportion of u/s grade.

The PDF includes a summary in English.

• Ervasti, E-mail: se@mm.unknown

The purpose of the investigation was to examine the seasonal pattern in Finnish export shipments and export sales of sawn softwood in 1927-1953. Statistics concerning shipments have been obtained from the Board of Customs, and material relating to sales has been provided by the Finnish Sawmill Owner’s Association (now Finnish Sawmills Association). On the basis of original monthly statistics, 13-month moving averages were computed. Finally, a seasonal index was calculated.

According to the results, the export shipments have a fairly apparent seasonal pattern with very low figures from January to April, a peak from June to August, and thereafter a gradual decline up to the end of the year. There are also considerable variations from year to year but in general the exports follow this rhythm. In contrast to export shipments the seasonal pattern of export sales is characterised by significant irregularity. Market developments and speculation play a far greater role than the seasonal factors. Indeed, a seasonal character in export sales can scarcely be discerned.

The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.

The PDF includes a summary in English.

• Holopainen, E-mail: vh@mm.unknown

The investigation studies the development of a logger’s daily earnings, a sawmill worker’s hourly earnings, saw timber stumpage prices and saw timber export prices, expressed in marks in Finland in 1913-1953, concentrating upon the trends of real value.

Although worker’s earnings in forestry and sawmilling have developed differently especially in the 1920s, the late 1930s and the early 1940s, their general long-time development has been very similar. On the other hand, the stumpage prices increased in real value much sharply than wages before the World War II. The real value of stumpage prices dropped because of economic regulation measures in the 1940s until regulation was abolished and the Korean War boom raised them in 1951, to fall after that. The development depends partly of the development of export prices for sawn timber.

Without changing the distribution of income from exports the real value of labour earnings, measured by export prices, may rise at most at a pace corresponding to the productivity of work. In logging there has been no actual increase in the productivity in the 20th century. As the increase in the productivity in timber transportation has probably been absorbed in increased wages and capital costs in the branch, a rise in forest labour’s real earnings and stumpage is possible only by means of a rise in the productivity of sawmilling or a change in the distribution of export income. It seems that from the end of World War I up to the middle of 1920s this increase of productivity and in export prices of sawn timber was shared only by capital and possibly mill labour. After that up to World War II stumpage prices rose so steeply that they swallowed the entire increase in productivity and reduced capital’s share of the export price. In the 40s the level of earnings followed the trend of productivity in industry, made possible by a sharp reduction in stumpage.

The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.
The PDF includes a summary in English.

• Heikinheimo, E-mail: lh@mm.unknown

A survey was conducted to investigate the domestic trade of saw timber in Finland in 1932. The inquiry complemented the investigation of consumption of wood made at the same time. In 1932 there were 383 sawmills in Finland, the total production of which was 814,630 std (1 std = 4.672 m³). Only 12.9% of the production was sold in the home market. Of the domestic sales, the share of costal sawmills was 25.7% and the inland sawmills 74.3%. The domestic sales were proportionally largest (55.5%) in the smallest sawmills, and they decreased gradually as the production of the sawmill increased. Comparatively more of the sawn timber of birch is sold in the domestic market than of pine or spruce. The depression of the building trade that begun in 1930 affected the trade still in 1932.

The PDF includes a summary in English.

• Hartikainen, E-mail: eh@mm.unknown