Current issue: 58(5)
Observatons of drying of Norway spruce (Picea abies (L.) Karst.) stands increased in 1930s in Southern Finland. The aim of the study was to analyse the advance and causes of drying. The work was begun in 1930s before the Second World War, and the damages caused to the forests by the war was used as supplemental observations in the study. A special method, drying analysis, was developed to study the process. It was used both in cases of insect and fungal diseases in the four research areas in Raivola and Ruotsinkylä. In addition, 7 observation areas were studied.
Several causes for drying of the trees were observed in the Norway spruce stands. These included European spruce bark beetle (Dendroctonus micans), root rot (Heterobasidion annosum), pine weevils (Pissodes sp.), bark beetles and honey fungus (Armillaria mellea).
The role of primary and secondary causes for drying, resistance of the trees and the drying process are discussed. Finally, the influence of forest management in drying process is analysed. Forests in natural state can be considered to be in an ideal balance. On the other hand, forest management can be used to maintain the vitality and resistance of the forests. Drying of Norway spruce stands can be taken into consideration when the stands are managed.
The PDF includes a summary in German.
The article gives a detailed review on the history and principles of forest management in Finland from the 19th century to the beginning of 21th century. Organized forest management begun in Finland in the middle of 19th century. The first method applied in Finland was based on annual cutting area and mainly used in state forests. By the beginning of 20th century saw-timber selection became the most usual felling method. Gradually the main principle changed to forest management by stands and revision of forest working plan.
The PDF includes a summary in German.
Systematic resin collection has not been practiced in Finland or other Nordic areas. One reason is the short growing season. Also, the local pine species, Scots pine (Pinus sylvestris L.) gives smaller resin yield than the southern species, such as Pinus maritima. In Nordic boreal forests resin has been collected only in the Soviet Union, where it has been practised also in Eastern Karelia, near the Finnish border. Resin collection experiments were arranged in former resin collection stands in Karelia in 1943. A so-called German method for running resin had been used in the stands. 30-40 sample trees were chosen in five sample sites.
Forest type did not have big influence in the resin yield. The yield seemed to be slightly higher in Scots pine stands growing in fertile sites compared to poorer sites. The diameter of the tree had largest effect on the yield. It is recommended to focus on stands with large trees, and trees with a large, vital crown. In this kind of stands it is possible to get best yield in relation to the work required. The height of the patch that was cut in the stem had no influence on the yield. The size of the patch should, however, not exceed 35-50% of the diameter of the tree.
The PDF includes a summary in German.
The aim of the investigation was to study the effect of size of a forest holding to its forest resources or state and quality of the forests. The data was collected in the second national forest inventory in Finland, carried out in 1936-1938. The study focuses on farms in two areas in Southern Finland: provinces of Pohjois-Häme and Satakunta, and provinces of Uusimaa and Kaakkois-Häme.
In 1938 about 53% of forests in Finland were owned by private forest holdings, the sizes of which varied from under 5 ha to over 1,000 ha. About 75 % of the holdings were under 50 ha. After 1918 the number of private forest holdings increased markedly, mainly due to settlement and tenant farmers gaining ownership to their farms.
The smaller the forest holdings were, the poorer was the silvicultural state of the forests and the smaller the standing stock. When the area of the forest holding increases, also the volume of the standing stock per hectare, the number of timber-trees, and average size of the timber trees increases. This is due to larger proportion of older age-classes and somewhat better forest management. Fellings have usually been stronger in the smaller forest holdings. The poor state of the forests originates often from use of the forests before the present ownership, such as slash and burn culture, grazing and cutting wood for household use. To improve the state of the forests, education and forest improvement practices are needed.
The PDF includes a summary in German.
The article is a report of land purchases of wood manufacturing industry, commissioned by the Ministry of Agriculture and Forestry in Finland in 1935. Second World War postponed publishing of the report. The land purchases of wood manufacturing industry, especially farms with agricultural land, was considered a concern in the end of 19th century, because it caused social problems related to landless people. To solve the problem, the government of Finland enacted in 1915 an act that restricted land purchase of the companies. The aim of this report was to collect statistics on the extent of the land purchases.
According to the investigation, forest manufacturing industry and companies operating on timber sales intensified land purchases in 1890s. After 1894 the companies purchased 80,000-100,000 ha land yearly. When the regulations restricting purchases of land came into act in 1915, the companies evaded the regulations by using private people or other companies to buy the land. Still, the annual purchases decreased to in average 21,000 ha in 1915-1936. The companies were still allowed to buy forest land when it did not affect agriculture in the farm. During and after the war the land purchases were interrupted. The report concludes that the regulations have worked as expected, and suggests some improvements in the legislation.
The PDF includes a summary in German.