Current issue: 58(5)
Flight periods of insects breeding on birch (Betula sp.) timber were observed by means of window flight traps baited with freshly cut birch logs in five locations in Finland from 1972 to 1976. Only few species were caught during the study. In general, these species were on the wing during midsummer, although flight periods of some of them were relatively long. Scolytus ratzeburgi Jans. caused harmful staining of wood within a month from attack, but the damage by the wood-boring pests remained negligible throughout the first storage summer.
The PDF includes a summary in Finnish.
Vegetation data collected from a random sample of mature forest stands representing mesic upland forest sites in Southern Finland were analysed and classified using two-way indicator species analysis (TWINSPAN). The variation of some characteristics of the tree stand and soil fertility between the produced vegetation units were analysed statistically.
Both the species list and the sample list arranged by TWINSPAN reflects the overall site fertility considerably well. The results are in agreement with the main division of mesic forest sites in the Finnish forest site type classification: vegetation units which can be assigned to the Oxalis-Myrtillus site type are clearly separated from the remaining units, and the overall site fertility indicates a statistically significant difference. The within-type variation in the vegetation composition in the Oxalis-Myrtillus site type reflects the variation in site fertility, whereas the within-type variation in the Myrtillus site type is mainly caused by the tree stand factor.
The PDF includes a summary in Finnish.
Two Japanese models regarding the within-stand competition have been reviewed on the basis of relevant literature. Competition-density and 3/2 th power models seem to be applicable also into tree stands. The latter model has been applied into the material obtained from literature. Computations showed consistancy with the results obtained elsewhere in the world. It is concluded that also in Finnish conditions the 3/2 th power law may have great potentials in describing the effects of stand density on tree size.
The PDF includes a summary in English.
Basic density and absorbed energy in impact bending were measured for 500 Norway spruce (Picea abies (L.) H. Karst.) samples from Northern and Southern Finland. Statistical analysis showed that the relationship between impact strength and basic density was significant and regression analysis showed that it was linear.
Furthermore, with constant density, the impact strength was higher in Northern than in Southern Finland. This was due to growth ring width: i.e. when density was kept constant the impact strength increased with decreasing growth ring width. In addition, when the growth ring width was kept constant, the basic density of wood was higher in Southern Finland than in Northern Finland.
The PDF includes a summary in English.
The effects of variations in the intensity of drainage and NPK fertilization on the natural regeneration and planting results and the subsequent development of seedling stands under various climatic conditions on drained nutrient poor pine bogs was investigated in a 16-year-old study.
Comparison of height development of Scots pine (Pinus sylvestris L.) stands on drained peatlands to that of pine stands growing in mineral soil sites show that in Southern Finland the most efficient forest improvement measures (10 m ditch spacing and 1,000 kg/ha NPK-fertilization) resulted in growth that corresponds a to a height index of a stand in a Vaccinium type site. Less efficient treatment (30 m ditch spacing and no fertilizer) resulted in growth corresponding the development of young stand in a Calluna type site. In Northern Finland the effect of fertilization on height growth was almost negligible. This is possibly due to a decrease in the nitrogen mobilization from south to north of Finland. Thus, it seems evident that fertilization of young Scots pine stands on nutrient poor drained peatlands can be recommended only in the southern part of the country.
The effect of ditch spacing is same in the whole country. The narrower the spacing the better the height growth. In the south planted stands thrive better than naturally regenerated stands, but the situation is reversed in the north.
The PDF includes a summary in English.
The effect of nitrogen fertilization and two insecticides on the occurrence of the plant pine bark bug, Aradus cinnamomeus Panzer, was investigated in a young Scots pine (Pinus sylvestris L.) stand in Southern Finland. Three years after the treatment the bug density was lowest in the trees treated with lindane or dimethoate. However, in spite of the increasing height growth of the trees, they did not grow significantly faster than the control trees. Nitrogen fertilization increased both bug density and the height growth of the trees. Thus, the value of nitrogen fertilization against Aradus cinnamomeus remains obscure.
The PDF includes a summary in Finnish.
The concepts of the terms compartment and compartment-wise forest inventory have been studied empirically by repeated delineation and intensive systematic plot samples. The material consisted of 16 study areas of some 8–90 hectares in size in Southern Finland and of more than 1,000 relascope plots. Stands and compartments were found to be rather heterogenous. Alternative photographs, working techniques and test persons were studied. An endeavour for better accuracy in compartment inventories is recommended.
The PDF includes a summary in English.
An inventory of Scots pine (Pinus sylvestris L.) graft collection in Kolari (67°15’ N, 23°45’ S) showed that severe damage by arctic hare (Lepus timidus L.), root and bank vole (Microtus oeconomus Pallas and M. agrestis L.) and moose (Alces alces L.) was done to grafts in size and in rather poor condition. Furthermore, the damage by arctic hare was dependent on the dry matter content of the needles. Another inventory in a fertilization experiment in a pine pole-stage forest showed that nitrogen fertilization increased the damage by arctic hare. On the basis of the present results, an assumption was made that the formation of repellent substances against herbivorous mammals is connected with wintering process of northern pines.
The PDF includes a summary in Finnish.
The tolerance of disturbance of the ground and field layer vegetation in a moderately fertile Norway spruce (Picea abies (L.) H. Karst.) on Oxalis-Myrtillus type forest in Southern Finland was studied. One of the sites, a summer cottage yard had been raked regularly during the last 25 years. The structure of the vegetation was quite different compared to the other sample site situated in a virgin forest. The phytomass and percentual coverage of the vegetation was remarkable lower in the raked habitat. Tall mosses, Pleuroxium schreberi and Hylocomnium splendens had especially disappeared. Most grass shrubs had also deteriorated. Only Deschampsia flexuosa was quite tolerant to raking. The phytomass of the dwarf shrubs was lower in the raked area but their relative production was higher. Three different kinds strategies of species were described: species of virgin shaded forest, species of meadow-like forest floor and species which tolerate or benefit from disturbance. The raked habitat had a higher species diversity than the virgin area. Nitrogen and carbon contents were lower in the soil of the raked area.
The PDF includes a summary in Finnish.
The effect of meteorological factors, the total sulphur content of the needles, and SO2 concentration in the ambient air on total peroxidase activity of Scots pine (Pinus sylvestris L.) needles was investigated in material obtained from Southern Finland. The correlation between temperature and total peroxidase activity was highest during the most active growing period. Linear correlation between relative humidity and total peroxidase activity appears to be low. The correlation between atmospheric SO2 concentration and total peroxidase activity was also low and varied inconsistently. The detected low association between the sulphur dioxide pollutant and the total peroxidase activity was assumed to be related to the sensitivity of peroxidase activity, many eco-physiological factors and to the genetic variation in conifers. It is difficult to separate a response due to this pollutant from environmental and genetic factors in a complex coniferous forest. Using total peroxidase activity as a routine indicator of air pollution seems to be unsuitable because of the large sample size required in order to obtain a reliable measurement of the pollutant’s effect under low pollution levels.
The PDF includes a summary in Finnish.
Sawmilling and Carpentry, Forestry and Hunting, and Food Grains are the economic sectors compared in this study by means of the total input-output coefficient. The coefficient measures the value of direct and indirect demand in the economy caused by a demand worth one monetary unit on the sector in focus. Forestry sector has the weakest linkage to other sectors. The derived coefficients are 1.693 for Sawmilling and Carpentry, 1.183 for Food Grain and 1.167 for Forestry and Hunting.
The PDF includes a summary in Finnish.
Length of the regeneration period is a criterion commonly used for comparing different reforestation methods. The time factor should be evaluated using a realistic system for long-term planning. In this paper the preliminary evaluation is made by simplified calculations based on the development series. The slow regeneration method is assumed to be otherwise equal to the rapid one but it has a 5- or 10-years delay at the beginning, and the rotation is thus the final cutting age plus 5- or 10-years delay. Cost of the time delay is taken to be the difference in reforestation costs that makes the rapid and the slow methods equivalent. Calculations are made using zero costs for the slow method; but if the cost of the slow method increases, the critical cost difference decreases very slowly. The final cutting age and the regeneration method must be decided simultaneously. Therefore, the cost of the time delay is presented as a function of final cutting age. By maximizing the average annual revenue, rotation can be even increased if more rapid but more expensive regeneration method is used.
The PDF includes a summary in English.
The study deals with the distribution of above-ground biomass of Vaccinium myrtillus L. along the vegetation continuum segregated by using phytosociological classification method composite clustering. The qualitative characteristics of forest sites corresponding to different vegetational clusters were defined on the basis of indirect gradient analysis of vegetation data and description of tree stand properties in stands in 160 sample areas in Southern Finland.
Six vegetation types differing from each other mainly in abundance of the most constant and dominant plant species were formed. Sample areas with rich grass-herb vegetation, as well as sample areas representing comparatively dry, barren site type were clearly separated from other groups of sample areas. Stand characteristics, particularly the proportional distribution of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) seems to be another important factor affecting the vegetation composition.
The lowest biomass values of blueberry were connected with herb-rich vegetation and shady spruce-dominated stands. Comparatively low values were connected to also other spruce-dominated sample areas. Pine-dominant or mixed pine-spruce stands the biomass values were significantly higher. Even if the site quality is essentially equal, the abundance relationships between Vaccinium myrtillus and other components of the ground vegetation may vary in wide ranges and cause difficulties in practical site classification.
The PDF includes a summary in English.
A study based on four young Scots pines (Pinus sylvestris L.) showed that the number of needle-covered shoots per crown volume unit was independent on tree position representing a constant value of 600–700 shoots/m3. This was true, even though the total shoot number decreased with deteriorating tree position. In tree crown there were fourth-order shoots in good light conditions but only first- and second-order-shoots, when light conditions were poor. The length of shoots decreased in accordance with increasing order of the shoot.
The share of the needle biomass and growth increased, when the shoot order increased. Similarly, the share of needles increased with deteriorating tree position. This was especially true in the upper crown. On the other hand, the share of the crown from the total biomass and growth increased with improving tree position. The percentage of crown system of a dominant tree in a sparse stand was 64% of that of biomass and 83% of that of growth. The corresponding values for a suppressed tree in a dense stand were 36% and 35%. The growth of wood, bark and needles in crown systems was linearly correlated with prevailing light conditions around the branch. It is evident that the tree position and light condition within the stand control the wood, bark and needle growth in the crown system and their interrelationships.
The PDF includes a summary in English.
The objective of the study was to compare different reforestation methods on ploughed areas in Finnish Lapland. Four species were compared: Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), silver birch (Betula pendula Roth) and Siberian larch (Larix sibirica Ledeb.). The experiments were established in different parts of Lapland on different types of sites in 1970–72.
In Scots pine there was a difference of 15 percentage points in survival of seedlings between the best and worst methods of regeneration. Containerized seedlings and paper pot seedlings had the best survival rates. In Norway spruce the respective difference between sowing and planting was about 20 percentage points. In favour of planting. The survival rate can be increased by about 20 percentage points by selecting the right tree species. The average height varied from 25 cm (the sowed Norway spruce) to 179 cm (the planted silver birch) after 10 growing seasons. The birch was planted at the most fertile sites only. The longer time passed from the afforestation the clearer was the effect of the local growing conditions on the development of the seedlings. The elevation of the site was one factor seemed to influence the success of the seedlings.
The PDF includes a summary in English.
A dynamic programming approach toward stem value estimation for standing Scots pine (Pinus sylvestris L.) trees was developed. The determination of the saw log value was based on the sawing pattern and on the final products composition. The combination of taper curve models and bark models providing taper curves both over bark and under bark, which constituted the basis of the optimum stem scaling. A computer program was developed to determine the optimum log sequence of the stem aiming at maximizing the value of the final products. To examine the reliability of the computation system, 445 Scots pine sample trees from 29 stands were used as a test material. The stem values of sample trees were calculated in two ways: 1) with 12 measured diameters, and 2) with 12 estimated diameters derived from measured tree characteristics. In both cases the values of the intermediate diameters were calculated via cubic spline interpolation.
The PDF includes a summary in Finnish.
The aim of this concise interview survey was to collect information about the servicing properties of forest tractors. Ten interviewees gave grades (in a scale from 4 to 10) concerning two servicing properties of various types of forest tractor. The rating covered the general safety during servicing (structural serviceability) and work postures during the work. Four types of forest tractor widely-used in Finland were chosen. The forwarders were of different size and structure.
According to the rating, the lightest forwarder was clearly superior to the other types. This machine was also the smallest in size and the most modern. Differences between the other three forwarders were not quite so clear. The variation between the machines as regards both so-called easy and troublesome tasks was considerable. Lubrication of the articulated shafts and supporting bearings was, however, very troublesome regardless the machine type. The heaviest tractor was considered the most difficult to service.
The PDF includes a summary in English.
Empirical measurements showed that the strength of a dead branch of Scots pine (Pinus sylvestris L.) was related to the second power of the branch diameter and the third power of the basic density of branch wood. The same factors affected also the strength of living branches. Especially, the contribution of wood density was important. The significance of the results is discussed considering the natural process of self-pruning and its effect on the branchiness of the stem.
The PDF includes a summary in English.
The usefulness of some international bibliographic databases for Finnish forest researchers was studied. In this study, 26 gratis online searches from one or more databases was made. The searches were carried out using mainly AGRICOLA, BIOSIS and CAB databases. The most used database was CAB, which includes Forestry Abstracts. The relevance of the references retrieved was evaluated by the users. Recall, precision, novelty and overlap of the references were measured. The users evaluated the results and costs of their search. Some previous comparable studies are reviewed.
The PDF includes a summary in English.
Methods involving the use of moving averages, trend surfaces and their combination are compared in deriving local values of monthly mean temperatures and precipitation sums from the observations made by the Finnish Meteorological Office. Correlation between meteorological variables and sea index, lake index and height above sea level were used in the trend surface method and in the combined method. Combined method, with a trend surface calculated from means of a long time period, was the most reliable method to estimate long local time series.
A method to calculate unbiased estimates of effective temperature sums from monthly mean temperatures is presented.
The PDF includes a summary in English.
In order to evaluate the strength properties of boards made from small and large Norway spruce (Picea abies) butt logs, 15 small (top end diameter 13 cm) and 15 large (top end diameter 25 cm) logs were sampled from a sawmill in Finland. From each log two test pieces were made in order to measure the bending and compression strength, dry density and average ring width.
The boards from small logs were stronger and their density higher. When the differences between groups were analysed it was found that the strength was determined by the density and ring width. When the density was kept constant, the increase in ring width had a decreasing effect on the strength properties. Because there was a negative correlation between ring width and density, ring width alone had a great effect on the strength properties.
The PDF includes a summary in English.
A population consisting of 450 Norway spruce (Picea abies (L.) H. Karst.) samples was gathered from northern and southern Finnish wood. The static bending strength was affected greatly by the density of the wood. However, keeping the density constant, the bending strength was higher in northern than in southern Finnish wood. The reason was the effect of the growth ring width.
The basic density was affected by the growth rate. Keeping the growth ring width constant, the basic density was over 5 kg/m3 lower in northern than in southern Finnish wood. This result supports the earlier findings on the effect of latitude.
The PDF includes a summary in English.
A study on the bilberry (Vaccinium myrtillus L.) was made in the municipality of Pihtipudas (about 63° 30’ N, 23° 30’ W) in 1977. Berry yield was surveyed by picking along 17 lines, each 1,000 m long. The lines were chosen randomly and were situated on different vegetation types throughout the municipality. The picking and use of bilberries were studied by an inquiry addressed to a random sample of families living in the area. Marketing of bilberry was investigated by means of report based on purchasing certificates.
The total yield of bilberry in Pihtipudas was 2.4 million kg (21.9 kg/ha). The yield per hectare were best on Vaccinium and Myrtillus type sites, and on swampy heath sites, where the yield was about 27–65 kg/ha, 50% of the yield on the Vaccinium type and 25% of that of Myrtillus type. Only 1.8% of the total bilberry yield was picked from old forests. Women contributed 54, men 34 and children 12% of the volume.
72% of the berries were used for home consumption by the families, 24% were sold and 4% were used for other purposes. The earnings from bilberries for the families that sold berries was in average FIM 178.
The PDF includes a summary in English.
Using literature and a simulator experiment, an ordinary processor and a grapple loader processor were compared in conditions corresponding to thinning later than the first commercial thinning. Visual bucking only was employed in the simulator experiment. The strip road spacing was 30 m and there was no preliminary skidding of the trees. The simulator experiment confirmed the view reached in the literature that work productivity of the grappler loader processor is 20–40 % greater than that of an ordinary processor provided that the stem size is under 0.2–0.4 m3.
The PDF includes a summary in English.
Climatological factors determining the natural northern boundary in Europe of oak (Quercus robur L.) were investigated. The natural northern boundary of oak corresponds in detail to the curve at which the growing season, beginning at +5°C in spring and ending at +10°C in autumn, is of a certain constant length. The northern boundaries for more oceanic plants can be explained by prolonged autumn activity. This is obviously the general explanation or the concept of oceanity. Oak spread markedly in Finland in the summers during 1961–1975, which on an average were as warm but much dried than those during 1931–1960. The importance of humidity for oak was discussed.
The PDF includes a summary in English.
The resistance of Finnish softwood timbers to Macrotermitinae termites was tentatively tested under tropical conditions in Zambia using a field microtest method. Picea abies (L.) H. Karst. and Larix sibirica L. sapwood and heartwood, as well as Pinus sylvestris L. sapwood, and the sapwood of the locally grown Pinus kesiya, exhibited no natural termite resistance. On the other hand, Juniperus communis heartwood appeared to be virtually immune and the heartwood of P. Sylvestris had some resistance. There were also some differences in the resistance of the heartwood of the different P. Sylvestris individuals tested, which was correlated with the width of the annual rings in the wood samples. The termite species involved were Microtermes sp. and Odontotermes sp. The possibilities of using different types of Finnish softwood timber in the regions in the tropics where there is a risk of termite damage is discussed.
The PDF includes a summary in Finnish.
The choice of sampling method is of prime importance when seeking relevant information about the height distribution and spatial arrangement of seedlings in the regeneration surveys. It is suggested that the size of sampling plots should depend on the height of the seedlings. Tall seedlings should be sampled from a larger area than short ones since tall seedlings are more important for the future development of the stand. We suggest principles for a technical development task to construct a device which is easy to use in practical regeneration surveys and by which sampling can be made proportional to plant height or any desired function of height.
The PDF includes a summary in Finnish.
The role played by the medium and fine silt and clay contents in determining the quartiles and the degree of stratification from a cumulative particle-size curve was studied in order to determine what time savings could be made in the sedimentation phase of soil mechanical analysis. The clay content of the samples was, in general, found to be so small that it did not affect the parameters studied. In contrast to this, the medium and fine silt content affected the lower quartile of the distribution for many soils classified as finer than medium sand. Consequently, only the omission of the determination of the clay fraction can be recommended as a time-saving measure in mechanical analysis.
The PDF includes a summary in Finnish.
The growth response of aspen (Populus tremula L.) to fertilization was studied in an experiment laid out in a naturally regenerated 35-year old stand on a previously burned-over land. The site was rather fertile. One-tree plot method was used. Applications of nitrogen (150 kg/ha as ammonium nitrate with lime), phosphorus (35 kg/ha as superphosphate), and potassium (66 kg/ha as potassium chloride) separately and in all possible combinations were used; the test included 11 replications. The growth reaction was measured as basal area growth excluding bark during 5 years. The factorial effects were computed using Yates method.
Potassium did not have any effect on basal growth of the trees. The response to phosphorus was also rather small. On the other hand, nitrogen appeared to have increased the basal area growth. The growth increase obtained with nitrogen alone was greater than when it was applied together with phosphorus and/or potassium.
The PDF includes a summary in English.
Altitude fluctuation of mire surface proportional to that of the groundwater table is presented for three virgin pine mires in Eastern Finland during the growing season 1982. The average amplitude of the surface fluctuation was found to be dependent on the period representing a certain type of weather, being limited to a certain maximum. The average amplitude of the surface fluctuation ranged from 18 to 45 mm; each of the mires followed a fluctuation scale of its own.
The daily fluctuation rates were low, generally 0.5–1 mm. No sudden fluctuation peaks occurred. Regularities in the surface fluctuation were caused by the duration of the period representing continuous sinking or rise of the groundwater table, and magnitude of it. The daily rate of the surface fluctuation related to that of the groundwater table was smaller in the beginning of such period than at the end of the same period. The one-directional rise or sinking of the altitude of the mire surface according to the groundwater table fluctuation is responsible for the autocorrelation of the long-term regression data.
The PDF includes a summary in Finnish.
The present study deals with the effect of forest drainage on some quality factors of brook waters. Under study were several brooks in the basin of the Kiiminkijoki River as well as its main tributary, the Nuorittajoki River. These are located in Northern Finland and belong to the international water program Project Aqua.
The following values were determined for the water samples: pH, electric conductivity, colour, concentration of suspended solids., NO2, NO3, and NH4 nitrogen concentrations, dissolved and total phosphorus, and Ca, Mg, K and Fe concentrations. Water quality in the brooks was monitored prior to and after ditching. A statistically significant change was noted in colour, in the concentration of suspended solids, in the NH4 concentration and in some brooks also in the pH value and in the total phosphorus, K, and Fe concentrations.
The PDF includes a summary in English.
The needle area distribution and crown structure of a young planted Scots pine (Pinus sylvestris L.) stand are described. The crown structure and crown shape showed apparent regularity in crown structure regardless of stand dynamics. Similarly, the shoot structure and individual needle area showed regularity in the number of needles per branch and shoot length unit, and consequent phytoarea density inside the needle cylinder. Also, the shoot area and needle area distributions were found to show a regular distribution of needle biomass throughout the crown, also inside the crown, in the dominant trees. In the suppressed trees the needle biomass was located in the upper crown and on the surface area of the crown. Estimates of the canopy needle area and distributions are given. The results were applied in calculations of the within-stand light regime. The results correlated well with the empirical results.
The PDF includes a summary in Finnish.