Articles containing the keyword 'metsätraktorit'

The aim of this concise interview survey was to collect information about the servicing properties of forest tractors. Ten interviewees gave grades (in a scale from 4 to 10) concerning two servicing properties of various types of forest tractor. The rating covered the general safety during servicing (structural serviceability) and work postures during the work. Four types of forest tractor widely-used in Finland were chosen. The forwarders were of different size and structure.

According to the rating, the lightest forwarder was clearly superior to the other types. This machine was also the smallest in size and the most modern. Differences between the other three forwarders were not quite so clear. The variation between the machines as regards both so-called easy and troublesome tasks was considerable. Lubrication of the articulated shafts and supporting bearings was, however, very troublesome regardless the machine type. The heaviest tractor was considered the most difficult to service.

The PDF includes a summary in English.

• Rieppo, E-mail: kr@mm.unknown
• Väyrynen, E-mail: sv@mm.unknown

The mobility of logging tractors was tested in the winter 1969 on difficult snow conditions to gather information for planning of logging operations and for logging machinery design. The tractors tested were Clark Ranger 666, Timberjack C, Valmet Terra, Ford Brunett 5000, Fiskars 510, BM-Volvo SM 660, BM Volvo SM 661, Ford Country 6, MF-Robur I and BM-Boxer T-350.

According to the results, there is a preference of tracked vehicles in difficult snow conditions compared to wheeled tractors. Ford Country with long and bearing full-tracks proved to have the best mobility. On downhill grades it was found significant differences between three-quarter-track-tractors and skidders, although the performance on level ground and uphill grades was relatively similar. The tracked vehicles can easier move on the packed snow layer and reach a higher speed.

The driving speed does not increase significantly until the density of snow has entirely changed through getting wet. Wet top layer of snow affects positively on driving, because it increases packing of the snow. Increasing density of the snow improves especially the mobility of broad-tired wheeled tractors. To be able to predict the driving speed of a tractor in winter working conditions one must know the depth of the snow layer and the density of the snow and the grade of the slope. In addition, the passages on the same route and the packing of the snow must be regarded.

The PDF includes a summary in English.

• Silvennoinen, E-mail: us@mm.unknown
• Haarlaa, E-mail: rh@mm.unknown