Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Silva Fennica vol. 40 no. 2 | 2006

Category : Research article

article id 477, category Research article

Pete Bettinger, Jianping Zhu. (2006). A new heuristic method for solving spatially constrained forest planning problems based on mitigation of infeasibilities radiating outward from a forced choice. Silva Fennica vol. 40 no. 2 article id 477. https://doi.org/10.14214/sf.477

Keywords: forest management; integer decision variables; integer programming

Abstract | View details | Full text in PDF | Author Info

A new heuristic method to mitigate infeasibilities when a choice is forced into a solution was developed to solve spatially constrained forest planning problems. One unique aspect of the heuristic is the introduction of unchosen decision choices into a solution regardless of the resulting infeasibilities, which are then mitigated by selecting next-best choices for those spatial units that are affected, but in a radiating manner away from the initial choice. As subsequent changes are made to correct the affected spatial units, more infeasibilities may occur, and these are corrected as well in an outward manner from the initial choice. A single iteration of the model may involve a number of changes to the status of the decision variables, making this an n-opt heuristic process. The second unique aspect of the search process is the periodic reversion of the search to a saved (in computer memory) best solution. Tests have shown that the reversion is needed to ensure better solutions are located. This new heuristic produced solutions to spatial problems that are of equal or comparable in quality to traditional integer programming solutions, and solutions that are better than those produced by two other basic heuristics. Three small hypothetical forest examples illustrate the performance of the heuristic against standard versions of threshold accepting and tabu search. In each of the three examples, the variation in solutions generated from random starting points is smaller with the new heuristic, and the difference in solution values between the new heuristic and the other two heuristics is significant (p<0.05) when using an analysis of variance. However, what remains to be seen is whether the new method can be applied successfully to the broader range of operations research problems in forestry and other fields.

Bettinger, Warnell School of Forest Resources, University of Georgia, Athens, GA 30602, USA E-mail: pbettinger@forestry.uga.edu
Zhu, Warnell School of Forest Resources, University of Georgia, Athens, GA 30602, USA E-mail: jz@nn.us

article id 347, category Research article

Gordon M. Hickey, John L. Innes. (2006). Monitoring and information reporting through regulation: an inter-jurisdictional comparison of forestry-related hard laws. Silva Fennica vol. 40 no. 2 article id 347. https://doi.org/10.14214/sf.347

Keywords: forest legislation; grounded theory; constant comparison; Europe; North America

Abstract | View details | Full text in PDF | Author Info

In most jurisdictions, the rule of law has been the core instrument used to implement rules, regulations and restrictions relating to forests. The results of this approach have relied on the effectiveness of the system for regulating through monitoring and reporting. Despite the obvious differences in the wider operating environment of forestry internationally, issues related to globalization have increased the need for comparison. The potential impact of certain social, economic and environmental differences on the nature of monitoring and information reporting is, therefore, important to forest policy and management. The analysis presented here considered data associated with forestry-related monitoring and information reporting to provide a comparative description of certain hard-law requirements in a sample of jurisdictions. This was done to shed light on the potential for coordinated monitoring and information reporting objectives to be mandated through inter-jurisdictional hard law. Our research suggests that further comparative analysis of hard law monitoring and information reporting requirements could form a central theme in defining the ‘ground rules’ of a global forest law.

Hickey, University of British Columbia, Faculty of Forestry, Department of Forest Resources Management, 2045, 2424 Main Mall, UBC, Vancouver, Canada V6T 1Z4 E-mail: ghickey@interchange.ubc.ca
Innes, University of British Columbia, Faculty of Forestry, Department of Forest Resources Management, 2045, 2424 Main Mall, UBC, Vancouver, Canada V6T 1Z4 E-mail: jli@nn.ca

article id 346, category Research article

Tuomo Nurminen, Heikki Korpunen, Jori Uusitalo. (2006). Time consumption analysis of the mechanized cut-to-length harvesting system. Silva Fennica vol. 40 no. 2 article id 346. https://doi.org/10.14214/sf.346

Keywords: cutting; time study; forest haulage; single-grip harvester; forwarder; work phase

Abstract | View details | Full text in PDF | Author Info

The time consumption and productivity of harvesting are dependent on stand conditions, the operators’ skills, working techniques and the characteristics of the forestry machinery. Even if the basic methods and machine types of the cut-to-length harvesting system have not changed significantly in 10 to 15 years, improvements in the operators’ competence, technical solutions in forest machinery and changes in the working environment have undoubtedly taken place. In this study, the objective was to discover the special characteristics in the time consumption of mechanized cutting and forest haulage in Finnish conditions. The empirical time study was conducted with professional operators and medium-sized single-grip harvesters and forwarders in final fellings and thinnings in easy terrain in central Finland. The models for effective time consumption in the work phases and total productivity were formed. Stem size, tree species and bucking affected the cutting, whereas timber density on the strip road, the average driving distance, load capacity, wood assortment and the bunching result of the harvester operator had an effect on the forest haulage performance. The results may be used in simulations, cost calculations and education.

Nurminen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: tuomo.nurminen@joensuu.fi
Korpunen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hk@nn.fi
Uusitalo, Finnish Forest Research Institute, Parkano Research Unit, Kaironiementie 54, FI-39700 Parkano, Finland E-mail: ju@nn.fi

article id 345, category Research article

Pekka Hyvönen, Perttu Anttila. (2006). Change detection in boreal forests using bi-temporal aerial photographs. Silva Fennica vol. 40 no. 2 article id 345. https://doi.org/10.14214/sf.345

Keywords: forest inventory; discriminant analysis; change detection; aerial photography; continuous updating

Abstract | View details | Full text in PDF | Author Info

Increased need for timely forest information is leading to continuous updating of stand databases. In continuous updating, stand attributes are estimated in the field after an operation and stored in databases. To find the changes caused by operations and forest damage, a semi-automatic method based on bi-temporal aerial photographs was developed. The test data were classified into three classes: No-change (952 stands), Moderate-change (163 stands) and Considerable-change (44 stands). The aerial photographs were acquired in years 2001 and 2004 with almost the same image specifications. Altogether 110 features at stand level were extracted and used in change detection analysis. The test data were classified with stepwise discriminant analysis. The overall accuracy of classification varied between 75.3 and 84.7%. The considerable changes were found without error, whereas the Moderate-change and No-change classes were often confused. However, 84.2% of thinned stands were classified correctly. The best accuracy in classification was obtained by using the histogram and textural features extracted from the original, uncorrected images. Radiometric correction did not improve the accuracy of classification. Soil type, characteristics of the growing stock and the location of a stand in an image were found to affect the change detection. Before the method can be applied operationally, issues related to, e.g., confusion between No-change and Moderate-change must be solved.

Hyvönen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: pekka.hyvonen@metla.fi
Anttila, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: pa@nn.fi

article id 344, category Research article

Juha Lappi. (2006). Smooth height/age curves from stem analysis with linear programming. Silva Fennica vol. 40 no. 2 article id 344. https://doi.org/10.14214/sf.344

Keywords: height growth; spline; ring counts; second order difference; Issa

Abstract | View details | Full text in PDF | Author Info

Stem analysis data defines a range of possible heights for each age. A smooth stem/age curve is obtained with linear programming (LP) when the sum of the absolute second differences of heights is minimized subject to constraints obtained from the stem analysis. The method is analogous to cubic splines. A LP problem can include additional constraints that are based on the assumption that the crosscut is randomly located within the annual height increment. The method produces smoother height curves than Issa method which is utilizing second order differences of ring counts. It was found using simulated data that the method provides better results than earlier methods for short bolts if height growth is sufficiently regular.

Lappi, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juha.lappi@metla.fi

article id 343, category Research article

Karin Vestlund, Tomas Nordfjell, Lars Eliasson, Anders Karlsson. (2006). A decision support system for selective cleaning. Silva Fennica vol. 40 no. 2 article id 343. https://doi.org/10.14214/sf.343

Keywords: forestry; pre-commercial thinning; automation; practical cleaning

Abstract | View details | Full text in PDF | Author Info

Cleaning (pre-commercial thinning) costs have increased relative to logging and regeneration costs, creating a desire for rationalisation. Cleaning with robots may be a solution, but automating stem selections requires a decision support system (DSS) capable of rendering acceptable results. The aims were to develop a DSS for automation of individual stem selections in practical cleaning, and to test, using simulations, if it renders acceptable results. Data on 17 young forest stands were used to develop a DSS that selects stems by species, position (including distance and density parameters), diameter, and damage. Six simulations were run, following the DSS, with different target settings for density, percentage of deciduous stems and minimum distance between stems. The results depend on the initial state of the stands, but generally met the requested targets in an acceptable way. On average, the density results deviated by –20% to +6% from the target values, the amount of deciduous stems shifted towards the target values, and the proportion of stems with defined damaged decreased from initially 14–90% to 4–13%. The mean diameter at breast height increased and the minimum allowed distance between stems was never violated. The simulation results indicate that the DSS is operational. However, for implementation in robotics a crucial problem is to automatically perceive the selected attributes, so additional simulations with erroneous data were run. Correct measurements of diameters are less crucial than to find the majority of the trees and the majority of trees with damages.

Vestlund, Swedish University of Agricultural Sciences, Department of Silviculture, P.O. Box 7060, SE-750 07 Uppsala, Sweden E-mail: karin.vestlund@ssko.slu.se
Nordfjell, Swedish University of Agricultural Sciences, Department of Forest Resource Management and Geomatics, SE-901 83 Umeå, Sweden E-mail: tn@nn.se
Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: le@nn.se
Karlsson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: ak@nn.se

article id 342, category Research article

Jaana Luoranen, Juha Lappi, Gang Zhang, Heikki Smolander. (2006). Field performance of hybrid aspen clones planted in summer. Silva Fennica vol. 40 no. 2 article id 342. https://doi.org/10.14214/sf.342

Keywords: survival; Populus; growth; hybrid aspen; micropropagation; planting date; root cutting; root egress; survivalgrowth

Abstract | View details | Full text in PDF | Author Info

We investigated the possibility to plant clonal hybrid aspen (Populus tremula x tremuloides) during the summer of propagation when the plants are 20–25 cm tall and only a few months old. In four experiments carried out in years 1998–2001, survival of summer-planted hybrid aspens was at least as high as that of hybrid aspen planted in autumn and spring. In all experiments, compared to planting in September or the following May, height growth was greater with planting in July and early August. Root egress of hybrid aspens planted in July and August was also greater than that of aspens planted in autumn or the following spring. Summer planting was thus possible both with plants produced by micropropagation and with those produced from root cuttings.

Luoranen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@metla.fi
Lappi, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: lj@nn.fi
Zhang, College of Horticulture, Agricultural University of Hebei, Baoding, Hebei, China E-mail: gz@nn.cn
Smolander, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: hs@nn.fi

article id 341, category Research article

Sanni Raiskila, Pekka Saranpää, Kurt Fagerstedt, Tapio Laakso, Mia Löija, Riitta Mahlberg, Leena Paajanen, Anne-Christine Ritschkoff. (2006). Growth rate and wood properties of Norway spruce cutting clones on different sites. Silva Fennica vol. 40 no. 2 article id 341. https://doi.org/10.14214/sf.341

Keywords: Norway spruce; density; growth rate; mechanical strength; modulus of elasticity; modulus of rupture

Abstract | View details | Full text in PDF | Author Info

The effect of growth rate on weight density and strength properties of three Norway spruce cutting clones growing on three different sites in different geographic locations was studied. The purpose was to follow variation in wood physical and mechanical properties and in quality between fast-growing clones grown in environments differing in nutritional and soil properties and climate within the boreal zone. The cloned trees had been selected on grounds of good growth, health and quality. The cuttings were collected from three-year-old seedlings and rooted. The rooted cuttings were planted in the 1970’s and they were on average 26 years old at a time of felling. The variation of weight density was studied within the annual ring and within the stem between the juvenile and mature wood from the pith to the bark with an X-ray densitometric method. The average annual ring width (and latewood proportion, %) varied between the clones from 2.92±1.36 mm (15.34%) to 3.30±1.25 mm (11.80%) and between the sites from 2.76±1.07 mm (14.71%) to 3.70±1.22 mm (13.29%). The mean weight density was 0.461±0.077 g cm–3 and latewood density 0.750±0.125 g cm–3 in this material. The mean modulus of elasticity was 9.88±1.43 GPa, modulus of rupture 67.51±11.50 MPa and weight density of the test samples (ρ12) 414±44 kg m–3 in mature wood. The parameters studied showed clearly that the environment had a large effect while the three clones differed from each other similarly in the different sites, e.g. the fastest growing clone was fastest on all sites.

Raiskila, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: sr@nn.fi
Saranpää, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pekka.saranpaa@metla.fi
Fagerstedt, Department of Biological and Environmental Sciences, Plant Biology, P.O. Box 65, FI-00014 University of Helsinki, Finland E-mail: kf@nn.fi
Laakso, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: tl@nn.fi
Löija, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: lm@nn.fi
Mahlberg, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: rm@nn.fi
Paajanen, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: lp@nn.fi
Ritschkoff, VTT Building and Transport, P.O. Box 1806, FI-02044 VTT, Finland E-mail: acr@nn.fi

article id 340, category Research article

Petteri Muukkonen, Raisa Mäkipää, Raija Laiho, Kari Minkkinen, Harri Vasander, Leena Finér. (2006). Relationship between biomass and percentage cover in understorey vegetation of boreal coniferous forests. Silva Fennica vol. 40 no. 2 article id 340. https://doi.org/10.14214/sf.340

Keywords: upland soils; peatlands; biomass models; ground vegetation

Abstract | View details | Full text in PDF | Author Info

In the present study, the aboveground biomass of the understorey vegetation of boreal coniferous forests was modelled according to the percentage cover. A total of 224 observations from 22 stands in upland forests and 195 observations from 14 different studies in peatland forests were utilized for the present analyses. The relationships between biomass and percentage cover can be used in ecosystem and carbon-cycle modelling as a rapid nondestructive method for estimation of the aboveground biomass of lichens, bryophytes, herbs and grasses, and dwarf shrubs in upland forests and bottom and field layers in peatland forests.

Muukkonen, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: petteri.muukkonen@metla.fi
Mäkipää, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: rm@nn.fi
Laiho, Department of Forest Ecology, P.O. Box 24, FI-00014 University of Helsinki, Finland E-mail: rl@nn.fi
Minkkinen, Department of Forest Ecology, P.O. Box 24, FI-00014 University of Helsinki, Finland E-mail: km@nn.fi
Vasander, Department of Forest Ecology, P.O. Box 24, FI-00014 University of Helsinki, Finland E-mail: hv@nn.fi
Finér, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: lf@nn.fi

article id 339, category Research article

John W. McCarthy, Gordon Weetman. (2006). Age and size structure of gap-dynamic, old-growth boreal forest stands in Newfoundland. Silva Fennica vol. 40 no. 2 article id 339. https://doi.org/10.14214/sf.339

Keywords: boreal forests; old-growth forests; gap dynamics; age and size structure; rotated sigmoid; Newfoundland

Abstract | View details | Full text in PDF | Author Info

The age and size structure of trees in old Abies-Picea-Betula forests on Newfoundland’s Great Northern Peninsula were examined. It was hypothesized that the size and age structure of both the tree and regeneration “strata” of these stands display the complex structural heterogeneity characteristic of classic, self-regenerating, uneven-aged old-growth stands, and that the development and dynamics of such structures occur over long periods of time. With all tree species combined, dbh (diameter at breast height) and height distributions exhibited a strong reverse-J character, with well-defined, semi-logarithmic rotated sigmoid height and size frequencies. Seedling height and basal diameter frequency distributions were reverse-J in character. Live tree ages for all species, except white birch (Betula papyrifera Marsh), ranged from 25 to 269 years, and were characterized by all-age frequency distributions. Tree age and size were poorly correlated. On average, balsam fir (Abies balsamea (L.) Mill.) required 62 years to reach breast height (1.3 m), with black spruce (Picea mariana (Mill.) B.S.P.) and white spruce (Picea glauca (Moench) Voss) requiring 40 and 48 years, respectively. Total age of dead standing trees ranged from 45 to 232 years. Reverse-J age frequencies characterized the seedling bank, with balsam fir seedlings present in nearly all age classes up to 110, 120 and 85 years in three sample stands. Seedling size (height and basal diameter)-age relationships were characteristic of decades-long suppression. The combination of tree and seedling bank size and age structure provide strong evidence of quasi-equilibrium, small-scale, gap dynamic old-growth boreal forest stands.

McCarthy, University of British Columbia, Forest Sciences Department, 2424 Main Mall, Vancouver, B.C., Canada V6T 1Z4 E-mail: jmccarthy@jesuits.ca
Weetman, University of British Columbia, Forest Sciences Department, 2424 Main Mall, Vancouver, B.C., Canada V6T 1Z4 E-mail: gw@n.ca

article id 338, category Research article

Andrea Vajda, Ari Venäläinen, Pekka Hänninen, Raimo Sutinen. (2006). Effect of vegetation on snow cover at the northern timberline: a case study in Finnish Lapland. Silva Fennica vol. 40 no. 2 article id 338. https://doi.org/10.14214/sf.338

Keywords: climate; snow; forest-tundra; Lapland; radar; tree-line; wind modelling

Abstract | View details | Full text in PDF | Author Info

The presence of permanent snow cover for 200–220 days of the year has a determining role in the energy, hydrological and ecological processes at the climate-driven spruce (Picea abies) timberline in Lapland. Disturbances, such as forest fires or forest harvesting change the vegetation pattern and influence the spatial variation of snow cover. This variability in altered snow conditions (in subarctic Fennoscandia) is still poorly understood. We studied the influence of vegetation on the small-scale spatial variation of snow cover and wind climate in the Tuntsa area that was disturbed by a widespread forest fire in 1960. Radar was applied to measure snow thickness over two vegetation types, the spruce-dominant fire refuge and post-fire treeless tundra. Wind modelling was used to estimate the spatial variation of wind speed and direction. Due to the altered surface roughness and the increased wind velocity, snow drifting was more vigorous on the open tundra, resulting in a 30-cm thinner snow cover and almost half the water equivalent compared to the forest values. The changes in local climate after the fire, particularly in snow cover, may have played an important role in the poor recovery of vegetation: a substantial area is still unforested 40 years after the fire.

Vajda, Finnish Meteorogical Institute, Climate and Global Change, P.O. Box 503, FI-00101 Helsinki, Finland E-mail: andrea.vajda@fmi.fi
Venäläinen, Finnish Meteorogical Institute, Climate and Global Change, P.O. Box 503, FI-00101 Helsinki, Finland E-mail: av@nn.fi
Hänninen, Geological Survey of Finland, P.O. Box 96, FI-02151 Espoo, Finland E-mail: ph@nn.fi
Sutinen, Geological Survey of Finland, P.O. Box 77, FI-96101 Rovaniemi, Finland E-mail: rs@nn.fi

article id 337, category Research article

Hannu Salminen, Risto Jalkanen. (2006). Modelling variation of needle density of Scots pine at high latitudes. Silva Fennica vol. 40 no. 2 article id 337. https://doi.org/10.14214/sf.337

Keywords: Pinus sylvestris; needles; dendroclimatology; NTM; precipitation; temperature; fascicles

Abstract | View details | Full text in PDF | Author Info

The relationship between apical extension and needle density and the effect of temperature and precipitation on needle density was modelled using data gathered from forty-nine felled sample trees in five stands of Scots pine (Pinus sylvestris L.) located along a latitudinal transect from the Arctic Circle up to the northern timberline. The lengths were measured and needle densities assessed from all annual shoots located above 1.3 metres using the Needle Trace Method (NTM), resulting, on average, in 39-year-long chronologies. The mean overall needle density was 7.8 short shoots per shoot centimetre. Needle-density variation in the measured data was mostly due to within-tree differences. Of the total variance, within-tree variation yielded 46%, between-tree 21%, and between-year 27%. The dependence of needle density on annual height growth was studied by fitting a multilevel model with random stand-, tree- and year-intercepts, the independent variables being tree age and height growth. There was a very strong negative correlation between height growth and needle density, and the proportion of between-year variance explained solely by height growth and age was 50%. The stand-wise residual variations and their correlations with the temperature and precipitation time series were further analysed with cross-correlation analysis in order to screen for additional independent variables. The only possible additional independent variable found was the precipitation of April–May (precipitation of May in the two northernmost stands). When it was added to the multi-level model, the proportion of explained between-year needle-density variance was 55%, but the overall fit of the model improved only slightly. The effect of late winter and early spring precipitation indicates the role of snow coverage and snowmelt on the growing conditions in the three southernmost stands. In general, stand-level needle-density variation is mostly due to changes in height growth.

Salminen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hannu.salminen@metla.fi
Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica