Current issue: 59(1)

Under compilation: 59(2)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Silva Fennica vol. 39 | 2005

Category : Research article

article id 478, category Research article

Ronald E. McRoberts, Daniel G. Wendt, Greg C. Liknes. (2005). Stratified estimation of forest inventory variables using spatially summarized stratifications. Silva Fennica vol. 39 no. 4 article id 478. https://doi.org/10.14214/sf.478

Keywords: bias; precision; classified satellite imagery; Internet; variance

Abstract | View details | Full text in PDF | Author Info

Large area natural resource inventory programs typically report estimates for selected geographic areas such as states or provinces, counties, and municipalities. To increase the precision of estimates, inventory programs may use stratified estimation, with classified satellite imagery having been found to be an efficient and effective basis for stratification. For the benefit of users who desire additional analyses, the inventory programs often make data and estimation procedures available via the Internet. For their own analyses, users frequently request access to stratifications used by the inventory programs. When data analysis is via the Internet and stratifications are based on classifications of even medium resolution satellite imagery, the memory requirements for storing the stratifications and the online time for processing them may be excessive. One solution is to summarize the stratifications at coarser spatial scales, thus reducing both storage requirements and processing time. If the bias and loss of precision resulting from using summaries of stratifications is acceptably small, then this approach is viable. Methods were investigated for using summaries of stratifications that do not require storing and processing the entire pixel-level stratifications. Methods that summarized satellite image-based 30 m x 30 m pixel stratifications at spatial scales up to 2400 ha produced stratified estimates of the mean that were generally within 5-percent of estimates for the same areas obtained using the pixel stratifications. In addition, stratified estimates of variances using summarized stratifications realized nearly all the gain in precision that was obtained with the underlying pixel stratifications.

McRoberts, North Central Research Station, USDA Forest Service, 1992 Folwell Avenue, Saint Paul, Minnesota, USA 5510 E-mail: rmcroberts@fs.fed.us
Wendt, Region 9, USDA Forest Service, 626 East Wisconsin Avenue, Milwaukee, Wisconsin 53202, USA E-mail: dgw@nn.us
Liknes, North Central Research Station, USDA Forest Service, 1992 Folwell Avenue, Saint Paul, Minnesota, USA 5510 E-mail: gcl@nn.us

article id 368, category Research article

Eero Muinonen. (2005). Generating a raster map presentation of a forest resource by solving a transportation problem. Silva Fennica vol. 39 no. 4 article id 368. https://doi.org/10.14214/sf.368

Keywords: forest inventory; calibration estimator; transportation problem; nonparametric estimation

Abstract | View details | Full text in PDF | Author Info

Necessary tools for raster map generation, for the approach based on the calibration estimator, were developed and implemented. The allocation of the area weight of each pixel to sample plots was formulated as a transportation problem, using a spectral distance measure as a transportation cost, and solved using the transportation simplex algorithm. Pixel level accuracy was calculated for the methods based on the calibration estimator so that the results could be compared with the results of the nearest neighbour estimation, the reference sample plot method (RSP) at pixel level. Local averaging in a 3 x 3 window was performed for each generated raster map as a postprocessing phase to smooth the map. Test plot results were calculated both for the unfiltered raster map and the filtered raster map. RSP produced the smallest RMSE in the pooled test data. Local averaging with a 3 x 3 filter decreased the pixel level error – and the bias – and the differences between the methods are smaller. Without local averaging, the pixel level errors of the methods based on solving the transportation problem were high. Raster map generation using the methods of this study forms an optional part – followed possibly by the classification of the pixel level results – of the whole computation task, when the area weight computation is based on the calibration estimation. For larger areas than in the present study, such as municipalities, the efficiency of the method based on the transportation model must be improved before it is a usable tool, in practice, for raster map generation. For nearest neighbour methods, the area size is not such a problem, because the inventory area is processed pixel by pixel.

Muinonen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: eero.muinonen@metla.fi

article id 367, category Research article

Sakari Tuominen, Markus Haakana. (2005). Landsat TM imagery and high altitude aerial photographs in estimation of forest characteristics. Silva Fennica vol. 39 no. 4 article id 367. https://doi.org/10.14214/sf.367

Keywords: multi-source forest inventory; satellite imagery; high-altitude aerial photographs; image texture

Abstract | View details | Full text in PDF | Author Info

Satellite sensor data have traditionally been used in multi-source forest inventory for estimating forest characteristics. Their advantages generally are large geographic coverage and large spectral range. Another remote sensing data source for forest inventories offering a large geographic coverage is high altitude aerial photography. In high altitude aerial photographs the spectral range is very narrow but the spatial resolution is high. This allows the extraction of texture features for forest inventory purposes. In this study we utilized a Landsat 7 ETM satellite image, a photo mosaic composed of high altitude panchromatic aerial photographs, and a combination of the aforementioned in estimating forest attributes for an area covering approximately 281 000 ha in Forestry Centre Häme-Uusimaa in Southern Finland. Sample plots of 9th National Forest Inventory (NFI9) were used as field data. In the estimation, 6 Landsat 7 ETM image channels were used. For aerial photographs, 4 image channels were composed from the spectral averages and texture features. In combining both data sources, 6 Landsat channels and 3 aerial image texture channels were selected for the analysis. The accuracy of forest estimates based on the Landsat image was better than that of estimates based on high altitude aerial photographs. On the other hand, using the combination of Landsat ETM spectral features and textural features on high altitude aerial photographs improved the estimation accuracy of most forest attributes.

Tuominen, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: sakari.tuominen@metla.fi
Haakana, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: mh@nn.fi

article id 366, category Research article

Lars Eliasson. (2005). Effects of forwarder tyre pressure on rut formation and soil compaction. Silva Fennica vol. 39 no. 4 article id 366. https://doi.org/10.14214/sf.366

Keywords: soil density; cone penetrometer; final felling; till soil

Abstract | View details | Full text in PDF | Author Info

In Swedish forestry, final felling is usually done by a harvester and a forwarder. These machines are heavy and the risk for rutting and soil compaction can be considerable under unfavourable soil conditions. The aim of this study was to evaluate effects of forwarder tyre inflation pressure on rutting and soil compaction after final felling. Three levels of forwarder tyre pressure were studied, 300, 450 and 600 kPa, after 2 and 5 machine passages. The first passage was driven with a 19.7 Mg harvester, and the second to fifth passages with a fully loaded forwarder totalling 37.8 Mg. Rut depths were not significant affected by tyre pressures but increased significantly with the number of machine passages. Soil density was significantly increased by 0.075 Mg m–3 by the harvester passage. Soil density increased significantly with increasing number of forwarder passages, and tyre pressure did not significantly influence this increase but the interaction between number of forwarder passages and tyre pressure was almost significant. Data suggest that density increases occur earlier in the 600 kPa treatment than in the other treatments. Only parts of an area harvested are trafficked in a normal harvesting operation. Outside the research area approximately 12.5 per cent of the area harvested was covered with ruts. On primary strip roads, which are heavily trafficked, soil compaction cannot be avoided by reducing the tyre pressure. On secondary strip roads, not passed more than once by the forwarder, a low forwarder tyre pressure may reduce soil compaction.

Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: lars.eliasson@norraskogsagarna.se

article id 365, category Research article

Raffaele Spinelli, Carla Nati, Natascia Magagnotti. (2005). Harvesting and transport of root biomass from fast-growing poplar plantations. Silva Fennica vol. 39 no. 4 article id 365. https://doi.org/10.14214/sf.365

Keywords: productivity; biomass; logistics; harvesting; root recovery; cost

Abstract | View details | Full text in PDF | Author Info

Recovery of tree root biomass can be attractive, since the stump-root system represents a substantial portion of the tree mass and its removal may prove instrumental to re-cultivation. Most available studies concern Nordic technologies, particularly suited to mature conifer stands. Unlike spruce, plantation poplar develops a deep taproot, whose extraction requires completely different methods. The aim of the study was to investigate poplar root recovery operations in plantations with time studies, and to determine the productivity and delivery costs of the operations. Seven operation systems developed to work with poplar plantations in Italian conditions were studied. Extraction and cleaning units were based on general-purpose prime movers. Under favourable conditions extraction and cleaning units achieved a very high productivity: 150 stumps per hour for the extraction unit and 170 for the cleaning unit. Delivered cost varied widely, ranging from 28 to 66 Euros Mg^–1. Transportation was the most expensive single work task. It accounted for about 40% of the total recovery cost. Extraction and cleaning contributed approximately 25% each to the total cost, and loading 9%. Guidelines to recovery system improvement and efficient operation are provided.

Spinelli, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy E-mail: spinelli@ivalsa.cnr.it
Nati, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy E-mail: cn@nn.it
Magagnotti, CNR/IVALSA, Via Madonna del Piano - Palazzo F, I-50019 Sesto Fiorentino (FI), Italy E-mail: nm@nn.it

article id 364, category Research article

Timo Pukkala, Jari Miina. (2005). Optimising the management of a heterogeneous stand. Silva Fennica vol. 39 no. 4 article id 364. https://doi.org/10.14214/sf.364

Keywords: Hooke and Jeeves algorithm; thinning schedules; within-stand variation

Abstract | View details | Full text in PDF | Author Info

The study presents a method for taking the heterogeneity of the stand into account in the optimisation of stand management. Heterogeneity refers to within-stand variation in stand density and/or other characteristics. A set of plots, corresponding to different sub-areas of the stand, represents the stand in calculations. Cuttings and other treatments of the plots are done simultaneously. The method was used to analyse how the optimal management depends on the heterogeneity of a Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.) stand. The results supported the hypothesis that the heterogeneity of a stand decreases its optimal prior-thinning density. Also the remaining stand basal areas were lower in heterogeneous stands, especially in spruce. The effect of stand heterogeneity prior to the first commercial thinning still affected the timing of the second thinning, which had to be conducted earlier and at lower prior-thinning basal areas in heterogeneous stands. This happened despite the fact that the first thinning greatly decreased the within-stand variation in stand basal area. In addition, heterogeneity decreased the soil expectation value, net income and timber harvests.

Pukkala, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: timo.pukkala@joensuu.fi
Miina, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: jm@nn.fi

article id 363, category Research article

Karin Vestlund, Tomas Nordfjell, Lars Eliasson. (2005). Comparison of human and computer-based selective cleaning. Silva Fennica vol. 39 no. 4 article id 363. https://doi.org/10.14214/sf.363

Keywords: forestry; decision support; pre-commercial thinning; automation; practical cleaning; training-tool

Abstract | View details | Full text in PDF | Author Info

In silvicultural tending operations like cleaning (pre-commercial thinning), the results are irreversible, so it is important for the decisions to be consistent with the aims for the stand. To enable operational automatic stem selections, a decision support system (DSS) is needed. A previously presented DSS seems to render acceptable cleaning results, but needs further analysis. The aims of the study were to compare the cleaning results of experienced cleaners and DSS simulations when “similar” instructions were given, and to assess the usefulness and robustness of the DSS. Twelve experienced cleaners were engaged to “clean” (mark main stems) six areas; each cleaner “cleaned” two areas. The DSS was used to generate two computer-based cleanings (simulations) of these areas. Four laymen also “cleaned” one of the areas following the DSS. The density results were significantly affected by the areas’ location, whereas the proportions of deciduous stems and damaged stems were significantly affected by both the areas’ location and method, i.e. manual “cleaning” and general or adjusted simulation. The study showed that the DSS can be adjusted so that the results are comparable with the cleaners’ results. Thus, the DSS seems to be useful and flexible. The laymen’s results were close to the results of the “general” simulation, implying that the DSS is robust and could be used as a training tool for inexperienced cleaners. The DSS was also acceptable on a single-tree level, as more than 80% of the main-stems selected in the simulations were also selected by at least one cleaner.

Vestlund, Swedish University of Agricultural Sciences, Department of Silviculture, P.O. Box 7060, SE-750 07 Uppsala, Sweden E-mail: karin.vestlund@ssko.slu.se
Nordfjell, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: tm@nn.se
Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: le@nn.se

article id 362, category Research article

Hannu Salminen, Risto Jalkanen. (2005). Modelling the effect of temperature on height increment of Scots pine at high latitudes. Silva Fennica vol. 39 no. 4 article id 362. https://doi.org/10.14214/sf.362

Keywords: Pinus sylvestris; height growth; dendroclimatology; precipitation; temperature

Abstract | View details | Full text in PDF | Author Info

The effect of temperature and precipitation on the height increment of Pinus sylvestris (L.) was modelled using data gathered from a total of 49 felled sample trees from five stands of Scots pine located along a latitudinal transect from the Arctic Circle up to the northern timberline in Finland. A multilevel mixed effects model and cross-correlation analysis of prewhitened time series was used to analyse the dependence between height increment and monthly meteorological observations. The effect of the mean July temperature of the previous year on height increment proved to be very strong at high latitudes (r > 0.7). The mean November temperature of the year before the previous affected statistically significantly on height increment in the three northernmost stands. There was no correlation between height increment and precipitation in any of the sites. The final height increment model based on all stands included tree age, long-term mean temperature sum of site, and the mean July temperature of the previous year as independent variables. According to the model, one degree’s change in July temperature results on average in 1.8 cm change in the next year’s height increment. There was a modest but significant polynomial age-effect. The proportion of explained variance (at the year level) was 74%. The July temperature dependence on height increment was shown to be very strong, suggesting a high value of height increment in climate modelling at the tree line.

Salminen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hannu.salminen@metla.fi
Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi

article id 361, category Research article

Jaana Luoranen, Risto Rikala, Kyösti Konttinen, Heikki Smolander. (2005). Extending the planting period of dormant and growing Norway spruce container seedlings to early summer. Silva Fennica vol. 39 no. 4 article id 361. https://doi.org/10.14214/sf.361

Keywords: Norway spruce; height growth; survival; planting date; carbohydrate; frozen storage; hot-lifting; root growth

Abstract | View details | Full text in PDF | Author Info

In order to make mechanized planting economically viable, the present spring planting period for Norway spruce (Picea abies (L.) Karst.) seedlings in Scandinavia needs to be extended. To evaluate the possibilities to extend the planting period, six field experiments were established in four years during which frozen-stored, dormant seedlings and actively growing seedlings targeted for spring planting were planted regularly from mid-May to mid-July or the end of August. The survival of actively growing seedlings did not differ between planting dates from mid-May to mid-July. For dormant seedlings, however, the later in summer they were planted the lower was the survival. Oversized seedlings grown in the nursery in containers of too small volume, which were usually planted after mid-June, resulted in reduced growth of seedlings after planting. Root egress (growth of roots from root plugs into the surrounding soil) was most rapid in July and early August and slowest in May and September. Results showed that with dormant seedlings the planting period can be extended from May to mid-June without increasing mortality or reducing growth. The planting period for seedlings stored outdoors and those seedlings that were already growing in June for the purpose of spring plantings can be extended even longer, but it must be kept in mind that the risk of mechanical damage and reduced growth increase due to brittleness of the shoot and increased height. Further research is needed to evaluate the risks in practical scale plantings and with seedlings that are specially targeted for planting after mid-June.

Luoranen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: jaana.luoranen@metla.fi
Rikala, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: rr@nn.fi
Konttinen, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: kk@nn.fi
Smolander, Finnish Forest Research Institute, Suonenjoki Research Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: hs@nn.fi

article id 360, category Research article

Timo Kurkela, Tarmo Aalto, Martti Varama, Risto Jalkanen. (2005). Defoliation by the common pine sawfly (Diprion pini) and subsequent growth reduction in Scots pine: a retrospective approach. Silva Fennica vol. 39 no. 4 article id 360. https://doi.org/10.14214/sf.360

Keywords: height growth; NTM; defoliation; insect attack; needle density; needle production; needle retention; radial growth; herbivory

Abstract | View details | Full text in PDF | Author Info

The foliage status in the main stem of Scots pines (Pinus sylvestris) was studied retrospectively using the needle trace method (NTM) on a stand, seriously defoliated by the pine sawfly (Diprion pini) in the 1980s. Needle density increased abruptly in the seasons following the defoliation. The strongest reduction in annual needle production occurred one year later. As a consequence of lower needle production, the annual number of attached needles decreased three to five years after the defoliation. Needle retention and the average age of attached needles tended to increase after defoliation. In analyses of covariance with the NTM variables, needle density (logarithmic transformed values) and average age of attached needles, had the highest, significant, negative relationship with radial and height increments both in the period prior to the defoliation and in the time when the trees were suffering from defoliation. The relationships between height increment and the number of needles and needle loss were positive and significant. Also radial increment had a positive relationship with the number of needles but not with needle loss. Interestingly, an abrupt increase in the needle density gave a good indication of the effects of a sudden defoliation in pines.

Kurkela, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: timo.kurkela@metla.fi
Aalto, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: ta@nn.fi
Varama, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mv@nn.fi
Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi

article id 479, category Research article

Ken Olaf Storaunet, Jørund Rolstad, Ivar Gjerde, Vegard S. Gundersen. (2005). Historical logging, productivity, and structural characteristics of boreal coniferous forests in Norway. Silva Fennica vol. 39 no. 3 article id 479. https://doi.org/10.14214/sf.479

Keywords: boreal forest; stand structure; decaying wood; forest history; naturalness; selective logging; dead trees

Abstract | View details | Full text in PDF | Author Info

Conservation of forest biodiversity has brought about an interest in evaluating the naturalness of forests, and to locate and protect semi-natural and old-growth forests in the Fennoscandian countries. However, it is not always clear how natural these forests really are, and how the past management history has affected their present structural composition. We studied the relationships between cut stumps from historical logging activity (50–100 years ago) and forest structural characteristics of today in a total of 385 0.25 ha plots in three boreal coniferous forests which are parts of National Nature Reserves in Norway. We also studied how forest productivity influenced these relationships. In plots with negligible logging impact we found the amount of living trees, dead wood, and size of the oldest trees mainly to increase with increasing productivity, whereas the age of the oldest trees decreased. The amount of deciduous trees was generally low irrespective of productivity. The intensity of logging did not consistently influence most of these forest structural variables, neither at low- nor at high-productive sites. The only consistent relationship in all study areas was a decreasing amount of dead wood with increasing logging intensity at high-productive sites. Also, the decay class distribution of dead wood was more right-skewed (indicating on-going accumulation of dead wood) the more logging had occurred at high-productive sites. Except from the effects on dead wood, previous logging does not show up as a major determinant of other stand structures of today.

Storaunet, Norwegian Forest Research Institute, Høgskolevegen 8, NO-1432 Ås, Norway E-mail: ken.storaunet@skogforsk.no
Rolstad, Norwegian Forest Research Institute, Høgskolevegen 8, NO-1432 Ås, Norway E-mail: jr@nn.no
Gjerde, Norwegian Forest Research Institute, Fanaflaten 4, NO-5244 Fana, Norway E-mail: ig@nn.no
Gundersen, Norwegian Forest Research Institute, Fanaflaten 4, NO-5244 Fana, Norway E-mail: vsg@nn.no

article id 377, category Research article

Saara Lilja, Timo Kuuluvainen. (2005). Structure of old Pinus sylvestris dominated forest stands along a geographic and human impact gradient in mid-boreal Fennoscandia. Silva Fennica vol. 39 no. 3 article id 377. https://doi.org/10.14214/sf.377

Keywords: disturbances; restoration; stand structure; managed forest; old growth forest

Abstract | View details | Full text in PDF | Author Info

Stand structural characteristics were examined in old Pinus sylvestris dominated sites in three regions along a broad geographic and human impact gradient in mid-boreal Fennoscandia. The study regions were: 1) Häme in south-western Finland, with a long history of forest utilization, 2) Kuhmo in north-eastern Finland, with a more recent history of intensive forest utilization, and 3) Vienansalo in Russian Karelia, still characterized by a large near-natural forest landscape. Within each region the sampled sites were divided into three human impact classes: 1) near-natural stands, 2) stands selectively logged in the past, and 3) managed stands treated with thinnings. The near-natural and selectively logged stands in Häme and Kuhmo had a significantly higher Picea proportion compared to stands in Vienansalo. In comparison, the proportions of deciduous tree volumes were higher in near-natural stands in Vienansalo compared to near-natural stands in Häme. The pooled tree diameter distributions, both in near-natural and selectively logged stands, were descending whereas managed stands had a bimodal diameter distribution. Structural diversity characteristics such as broken trunks were most common in near-natural stands and in stands selectively logged in the past. The results demonstrate the higher structural complexity of near-natural stands and stands selectively logged in the past compared to managed stands, and highlight that old near-natural stands and stands selectively logged in the past vary widely in their structures. This obviously reflects both their natural variability but also various combinations of pre-industrial land use and human impact on fire disturbance. These factors need to be acknowledged when using “natural” forest structures as a reference in developing strategies for forest management, restoration and nature conservation.

Lilja, University of Helsinki, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: saara.lilja@helsinki.fi
Kuuluvainen, University of Helsinki, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: tk@nn.fi

article id 376, category Research article

Nils Lexerød, Trond Eid. (2005). Recruitment models for Norway spruce, Scots pine, birch and other broadleaves in young growth forests in Norway. Silva Fennica vol. 39 no. 3 article id 376. https://doi.org/10.14214/sf.376

Keywords: regeneration; national forest inventories; growth simulators; probability models; conditional models; Norway

Abstract | View details | Full text in PDF | Author Info

The objective of the present study was to develop recruitment models for Norway spruce, Scots pine, birch and other broadleaves in young growth forests in Norway. The models were developed from permanent sample plots established by the National Forest Inventory, and they will be included in a growth simulator that is part of a large-scale forestry scenario model. The modelling was therefore restricted to independent variables directly or indirectly available from inventories for practical forest management planning. A two-stage modelling approach that suited the stochastic nature of recruitment in boreal forests was used. Models predicting the probability of recruitment were estimated in a first stage, and conditional models for the number of recruits were developed in a second. The probability models as well as the conditional models were biologically realistic and logical. The goodness of fit tests revealed that the probability models fitted the data well, while the coefficients of determination for the conditional models were relatively low. No independent test data were available, but comparisons of predicted and observed number of recruits in different sub-groups of the data revealed few large deviations. The high level of large random errors was probably due to the great variability observed in number of recruits rather than inappropriate specifications of the models. Provided the generally high level of uncertainty connected to analysis performed with large-scale forestry scenario models and the stochastic nature of recruitment, the presented models seem to give satisfactory levels of accuracy.

Lexerød, Norwegian University of Life Sciences, Department of Ecology and Natural Resource Management, P.O. Box 5003, NO-1432 Ås, Norway E-mail: nils.lexerod@umb.no
Eid, Norwegian University of Life Sciences, Department of Ecology and Natural Resource Management, P.O. Box 5003, NO-1432 Ås, Norway. E-mail nils.lexerod@umb.no E-mail: te@nn.no

article id 375, category Research article

Edgar Víquez, Diego Pérez. (2005). Effect of pruning on tree growth, yield, and wood properties of Tectona grandis plantations in Costa Rica. Silva Fennica vol. 39 no. 3 article id 375. https://doi.org/10.14214/sf.375

Keywords: wood quality; teak; heartwood volume; stem form; knot-free volume

Abstract | View details | Full text in PDF | Author Info

Reduced plantation densities have the effect that obtaining natural pruning and stem straightness are less assured. The physiological process of self-pruning is replaced by manual pruning. Generally, plantations are denser and have more uniform spacing than natural forests. In many, if not most species, natural pruning is never a satisfactory option, even after branch senescence, if production of clear wood is a management objective. Natural pruning can only be considered on a species by species basis. This study reports on the first results of a pruning trial for Tectona grandis L.F. plantations in Costa Rica. The treatments consisted of pruning heights of 3.0, 4.0, and 5.0 meters, and the Control without pruning. Differences among treatments in DBH and total height were significant at 3.2, 5.2, and 6.1 years of age, but not at 7.3 years. Under an intensive pruning regime, a teak tree at rotation (20 years) may yield over 40% of knot-free volume (over 60% of the merchantable tree volume). Current findings open a scope for new management options, aiming at improving stem form and wood quality by means of an intensive pruning regime, without having a detrimental effect on tree growth and stand yield.

Víquez, Tropical Agricultural Research and Higher Education Center (CATIE), Apartado 7170 CATIE, Turrialba, Costa Rica E-mail: eviquez@catie.ac.cr
Pérez, Ambiente Tierra S.A., Apartado 733-2250, Tres Ríos, Cartago, Costa Rica E-mail: dp@nn.cr

article id 374, category Research article

Jyrki Hytönen, Paula Jylhä. (2005). Effects of competing vegetation and post-planting weed control on the mortality, growth and vole damages to Betula pendula planted on former agricultural land. Silva Fennica vol. 39 no. 3 article id 374. https://doi.org/10.14214/sf.374

Keywords: Betula pendula; vegetation control; herbicides; mulch; cover crop; vole damage; weed cover

Abstract | View details | Full text in PDF | Author Info

Effects of competing vegetation and weed control methods (fibre board mulch, cover crop of clover, various herbicides) on the survival and growth of and vole damage to silver birch (Betula pendula Roth) were analysed based on data from a field experiment established in southern Finland. The cover percentage of competing vegetation and its shading effect were assessed, and seedling size and vitality were recorded several times during the 11-year research period. Mean seedling height and height increment decreased linearly with increasing vegetation cover. Seedling mortality started to significantly increase once the vegetation cover had reached the level of 60–80%. Herbicides significantly retarded increase of weed cover on the initially weedless areas for two to three years, and a cover crop promoted increase in cover percentage. Successful weed control with herbicides significantly increased seedling growth and survival. After 11 years, the average stem volume on the herbicide-treated plots (28.9 m3 ha–1) was 2.5-fold as compared to that of the control plots (11.6 m3 ha–1). Furthermore, seedling mortality on the control plots (21%) was almost 3.5-fold as compared to the seedling mortality on herbicide-treated plots (6%). Having a cover crop proved to be an ineffective weed control method both in terms of seedling growth and survival. The application of mulch had only a slight effect on height increment (0.6 m in 11 years), but on the other hand, it considerably decreased seedling mortality (control: 21%, mulch treatment: 1.5%). These differences were not, however, statistically significant. Small seedling size, high shading class, and high vegetation coverage percentage increased the risk of voles damaging the seedlings.

Hytönen, Finnish Forest Research Institute, Kannus Research Station, P.O. Box 44, FI-69101 Kannus, Finland E-mail: jyrki.hytonen@metla.fi
Jylhä, Finnish Forest Research Institute, Kannus Research Station, P.O. Box 44, FI-69101 Kannus, Finland E-mail: pj@nn.fi

article id 373, category Research article

Anna Saarsalmi, Pekka Tamminen. (2005). Boron, phosphorus and nitrogen fertilization in Norway spruce stands suffering from growth disturbances. Silva Fennica vol. 39 no. 3 article id 373. https://doi.org/10.14214/sf.373

Keywords: Norway spruce; fertilization; needles; height growth; recovery; boron; growth disorders; soil

Abstract | View details | Full text in PDF | Author Info

Growth disturbance symptoms typical of B deficiency have been reported on Norway spruce (Picea abies (L.) Karst.) trees in many parts of eastern Finland. In order to test the B deficiency hypothesis and explore the possibilities of curing the disturbed trees with B fertilization, three experiments were established in October 1999 in young Norway spruce stands growing on fertile sites in eastern Finland. All the stands contained healthy, slightly and severely damaged trees with growth disturbances typical of B deficiency (B < 5 mg kg–1). 40 healthy, 40 slightly damaged, and 40 severely damaged trees were selected as sample trees in each stand. In May 2000, the trees were fertilized with 2.0 kg B ha–1 as borax (B), 2.0 kg B ha–1 and 40 kg P ha–1 as superphosphate (B+P) or 200 kg N ha–1 as urea (N). The control trees were not fertilized (0). The needle response to B fertilization was rapid, relatively high B concentrations being achieved already after one growing season. Boron fertilization cured the growth disorders and increased height growth within four years, but had no effect on diameter growth. The trees also recovered without B fertilization, but to a lesser extent compared to the B fertilized trees. Compared to the control, boron fertilization increased the height growth in all the disorder classes, i.e. 5, 17 and 19 cm yr–1 for healthy, slightly and severely damaged trees, respectively. As the healthy trees also seemed to benefit from B fertilization, this indicates that B deficiency in fact retards height growth before any disorder symptoms become apparent in individual trees. Compared with B alone, the application of P together with B gave no additional benefit. Nitrogen fertilization alone appeared to have a detrimental effect on height growth in the severely disturbed trees.

Saarsalmi, The Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: anna.saarsalmi@metla.fi
Tamminen, The Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pt@nn.fi

article id 372, category Research article

Ulf Sikström. (2005). Pre-harvest soil acidification, liming or N fertilization did not significantly affect the survival and growth of young Norway spruce. Silva Fennica vol. 39 no. 3 article id 372. https://doi.org/10.14214/sf.372

Keywords: Picea abies; regeneration; limestone; sulphur powder; urea

Abstract | View details | Full text in PDF | Author Info

Acidification, liming, and N fertilization affect a number of soil properties. Such changes may have an impact on forest regeneration and yield. The aim of this study was to investigate the survival and growth of Picea abies (L.) Karst. planted on plots that had been acidified (in 12 annual treatments totalling 600 or 1200 kg S ha–1 in the form of elemental sulphur), limed (12 x 500 = 6000 kg lime ha–1 in the form of CaCO3) or N-fertilized (3 x 200 = 600 kg N ha–1 in the form of urea) prior to harvest. Trees growing on plots treated with a combination of the N plus the lower S application were also tested. None of the treatments, applied in three replicate stands, significantly influenced either survival or growth of Picea abies trees during the first 11 growing seasons after planting.

Sikström, SkogForsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: ulf.sikstrom@skogforsk.se

article id 371, category Research article

Mika Nieminen, Erkki Ahti, Hannu Nousiainen, Samuli Joensuu, Martti Vuollekoski. (2005). Capacity of riparian buffer zones to reduce sediment concentrations in discharge from peatlands drained for forestry. Silva Fennica vol. 39 no. 3 article id 371. https://doi.org/10.14214/sf.371

Keywords: ditching; suspended solids; peatlands; erosion; riparian buffer zones; water quality protection

Abstract | View details | Full text in PDF | Author Info

In 1995–2001, the efficiency of riparian buffer zone areas to reduce the concentrations of suspended solids in discharge from peatlands drained for forestry purposes was studied at 7 locations in south-central Finland. The two largest buffer zones reduced the concentrations of suspended solids by > 70%. The efficiency of the three medium-sized buffer zones to reduce through-flow sediment concentrations was 50–60%, but no reduction occurred at the smallest two buffer areas. Thus, the capacity of buffer zones to reduce sediment concentrations was strongly related to their size. However, significant correlations were also found between reduction capacity and inflow water sediment concentrations, although the correlations at the two smallest buffer zones were low. The use of buffer zones in reducing sediment load from peatlands drained for forestry purposes is recommended, but relatively large areas for efficient removal capacity are needed.

Nieminen, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mika.nieminen@metla.fi
Ahti, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: ea@nn.fi
Nousiainen, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: hn@nn.fi
Joensuu, Forestry Development Centre Tapio, Soidinkuja 4, FI-00700 Helsinki, Finland E-mail: sj@nn.fi
Vuollekoski, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: mv@nn.fi

article id 370, category Research article

Pekka Tamminen, John Derome. (2005). Temporal trends in chemical parameters of upland forest soils in southern Finland. Silva Fennica vol. 39 no. 3 article id 370. https://doi.org/10.14214/sf.370

Keywords: soil chemistry; acidification; time series

Abstract | View details | Full text in PDF | Author Info

Changes in chemical soil properties during periods of 12 to 28 years were studied in 54 stands in southern Finland. Relative slopes (%/year) were calculated for the changes in soil variables in order to utilise all the sampling occasions (2–6) covered by the study period. Only the results of new analyses made on the soil samples could be used owing to unpredictable differences between the results of the original and new analyses. During the study period the acidity (pH, exchangeable acidity) of the organic layer had decreased, and the mineral soil had become more acidic only in terms of increased exchangeable aluminium concentrations. An increasing trend in the amount of soil organic matter best explained the acidity variables: it lowered acidity in the organic layer, but increased it in the mineral soil. Acid ammonium acetate extractable nutrients showed decreasing trends over time, apart from an increasing trend for sulphur in the 0–30 cm mineral soil layer. Total concentrations of most elements in the organic layer, including nitrogen and sulphur, also showed a decreasing trend. Changes in the soil variables could not be firmly connected to deposition, wood production or the amount of nutrients accumulated in woody tissues. However, the decrease in sulphur concentrations in the organic layer was clearly linked with the decrease in sulphur deposition in recent years.

Tamminen, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pekka.tamminen@metla.fi
Derome, Finnish Forest Research Institute, Rovaniemi Research Station, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: jd@nn.fi

article id 389, category Research article

Ritva Toivonen, Eric Hansen, Erno Järvinen, Raija-Riitta Enroth. (2005). The competitive position of the Nordic wood industry in Germany – intangible quality dimensions. Silva Fennica vol. 39 no. 2 article id 389. https://doi.org/10.14214/sf.389

Keywords: wood products; quality; the intangible product component; performance

Abstract | View details | Full text in PDF | Author Info

This study examines the importance of various intangible product quality dimensions as perceived by wood-trading retailer and wholesaler companies in Germany. Using perceived importance and perceived performance, the study first examines the dimensionality of intangible product quality and then compares Nordic wood product suppliers with suppliers from other major supply regions. Data was collected from 76 German companies during 2000–2001. Results indicate that intangible product quality can be described in three dimensions, “Behaviour and Image”, “Serviceability and Environment”, and “Reliability”. Results also show that Nordic suppliers do not have a strong competitive position in Germany in terms of intangible product quality dimensions. Thus, Nordic suppliers could improve their competitive position by enhancing their service, logistics and other dimensions of the intangible product offering.

Toivonen, Pellervo Economic Research Institute PTT, Eerikinkatu 28 A, FI-00180, Helsinki, Finland E-mail: ritva.toivonen@dnainternet.net
Hansen, Oregon State University, Dept. of Wood Science & Engineering, Richardson Hall 108, 97331-5751 Corvallis, OR, USA E-mail: eh@nn.us
Järvinen, Pellervo Economic Research Institute PTT, Eerikinkatu 28 A, FI-00180, Helsinki, Finland E-mail: ej@nn.fi
Enroth, Finnish Forest Research Institute, Unioninkatu 40 A, FI-00170 Helsinki, Finland E-mail: rre@nn.fi

article id 388, category Research article

Jacob Edlund, Mats Warensjö. (2005). Repeatability in automatic sorting of curved Norway spruce saw logs. Silva Fennica vol. 39 no. 2 article id 388. https://doi.org/10.14214/sf.388

Keywords: Picea abies; compression wood; stem form; bow; scanner; sorting

Abstract | View details | Full text in PDF | Author Info

Sawn wood from curved logs is prone to have cross grain and contain compression wood, both of which affect the dimensional stability. Different types of curvature can, however, have different effects on both the sawing process and board quality, which is why a standard measure of bow height alone is not enough to sort logs or set the log quality. The aim of this study was to evaluate the repeatability when sorting curved saw logs using a 3D log scanner. In the study, 56 logs were categorized into five different curvature types and four different degrees of curvature severity. The logs were run through a Rema 3D log scanner four times, and the external geometry was recorded. From the geometry data, variables describing log shapes were calculated and used to develop models using linear discriminant analysis, which was used to classify the logs according to curvature type. The accuracy and repeatability were evaluated for the classifications with Cohen’s simple Kappa coefficient. The results of this study showed that it is possible to sort logs by curve type using a 3D log scanner, although sorting by curve type was largely dependent on curve severity. The repeatability test determined that the chance of a curved log being graded identically two consecutive times was 0.40, measured as kappa.

Edlund, SLU, Department of Forest Products and Markets, P.O. Box 7060, SE-750 07 Uppsala, Sweden E-mail: jacob.edlund@spm.slu.se
Warensjö, SLU, Department of Forest Products and Markets, P.O. Box 7060, SE-750 07 Uppsala, Sweden E-mail: mw@nn.se

article id 387, category Research article

Sanna Laukkanen, Teijo Palander, Jyrki Kangas, Annika Kangas. (2005). Evaluation of the multicriteria approval method for timber-harvesting group decision support. Silva Fennica vol. 39 no. 2 article id 387. https://doi.org/10.14214/sf.387

Keywords: group decision support; multicriteria approval; timber-harvesting planning; voting methods

Abstract | View details | Full text in PDF | Author Info

The decision support methods most often used in timber-harvesting planning are based on a single criterion. In this study, a voting-theory-based method called multicriteria approval (MA) is introduced to the group decision support of timber-harvesting. The use of voting methods alleviates the problems caused by the multitude of decision objectives involved in forestry decision-making and by the poor quality of information concerning both the preferences of decision-makers and the evaluation of decision alternatives with respect to the objectives often faced in practical timber-harvesting planning. In the case study, the tactical forest management plan of a forest holding jointly owned by three people was specified at the operative timber-harvesting level. The task was to find the best actual operative alternatives for the harvesting that had been proposed in the tactical plan. These timber-harvesting alternatives were combinations of treatment, timber-harvesting system and the timing of logging. Forest owners established multiple criteria under which the alternatives were evaluated. Two versions of MA were tested, one of them based on individual decision analyses and other one based on a composite analysis. The first was markedly modified from the original MA, combining properties of MA and Borda count voting. The other was an original MA with the order of importance for criteria estimated either using Borda count or cumulative voting. The results of the tested MA versions produced were very similar to each other. MA was found to be a useful tool for the group decision support of timber-harvesting.

Laukkanen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: sanna.laukkanen@joensuu.fi
Palander, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: tp@nn.fi
Kangas, UPM-Kymmene Forest, P.O. Box 32, FI-37601 Valkeakoski, Finland E-mail: jk@nn.fi
Kangas, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ak@nn.fi

article id 386, category Research article

Jouni Kalliovirta, Timo Tokola. (2005). Functions for estimating stem diameter and tree age using tree height, crown width and existing stand database information. Silva Fennica vol. 39 no. 2 article id 386. https://doi.org/10.14214/sf.386

Keywords: forest inventory; modeling; crown diameter; stem diameter

Abstract | View details | Full text in PDF | Author Info

The aim was to investigate the relations between diameter at breast height and maximum crown diameter, tree height and other possible independent variables available in stand databases. Altogether 76 models for estimating stem diameter at breast height and 60 models for tree age were formulated using height and maximum crown diameter as independent variables. These types of models can be utilized in modern remote sensing applications where tree crown dimensions and tree height are measured automatically. Data from Finnish national forest inventory sample plots located throughout the country were used to develop the models, and a separate test site was used to evaluate them. The RMSEs of the diameter models for the entire country varied between 7.3% and 14.9% from the mean diameter depending on the combination of independent variables and species. The RMSEs of the age models for entire country ranged from 9.2% to 12.8% from the mean age. The regional models were formulated from a data set in which the country was divided into four geographical areas. These regional models reduced local error and gave better results than the general models. The standard deviation of the dbh estimate for the separate test site was almost 5 cm when maximum crown width alone was the independent variable. The deviation was smallest for birch. When tree height was the only independent variable, the standard deviation was about 3 cm, and when both height and maximum crown width were included it was under 3 cm. In the latter case, the deviation was equally small (11%) for birch and Norway spruce and greatest (13%) for Scots pine.

Kalliovirta, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: jk@nn.fi
Tokola, University of Helsinki, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: timo.tokola@helsinki.fi

article id 385, category Research article

Diego Pérez, Markku Kanninen. (2005). Effect of thinning on stem form and wood characteristics of teak (Tectona grandis) in a humid tropical site in Costa Rica. Silva Fennica vol. 39 no. 2 article id 385. https://doi.org/10.14214/sf.385

Keywords: sapwood; stem taper; basic density; heartwood; form factor

Abstract | View details | Full text in PDF | Author Info

The aim of the study was to evaluate the effects of thinning intensity on wood properties, such as heartwood proportion, wood basic density, and stem form of teak (Tectona grandis L.f.). The thinning trial was established on a teak plantation in a humid tropical site in northern Costa Rica. The moderate and heavy thinnings yielded the highest percentage of heartwood volume (25 to 30% of total stem volume). The differences between stem form factors under different treatments were not statistically significant after separating thinning effects from timing effects. Both the highest (> 0.65 g cm^–3) and the lowest (< 0.50 g cm^–3) wood density values were observed under light thinnings, making it difficult to establish a relationship. Large variations in wood properties found under different thinning regimes suggest that at early stages teak stands can be managed under different thinning programs without negatively affecting the quality of wood under humid tropical conditions.

Pérez, Ambiente Tierra S.A., Apartado 733-2250, Tres Ríos, Cartago, Costa Rica E-mail: diegoperez@costarricense.cr
Kanninen, Center for International Forestry Research (CIFOR), Bogor, Indonesia E-mail: mk@nn.id

article id 384, category Research article

Jorge Cancino, Joachim Saborowski. (2005). Comparison of randomized branch sampling with and without replacement at the first stage. Silva Fennica vol. 39 no. 2 article id 384. https://doi.org/10.14214/sf.384

Keywords: Randomized Branch Sampling; sampling without replacement; probability proportional to size; unequal selection probabilities; multistage sampling

Abstract | View details | Full text in PDF | Author Info

Randomized Branch Sampling (RBS) is a multistage sampling procedure using natural branching in order to select samples for the estimation of tree characteristics. Usually, sampling units are selected with unequal probabilities. Conventional RBS uses sampling with replacement (SWR) for repeated sampling on the first stage, and the sample size equals 1 on all subsequent stages, thus resulting in n so-called sample paths. When the sampling fraction is large multiple selections of first stage units are likely. Sampling without replacement (SWOR) at the first stage is an alternative that is expected to increase efficiency of the procedure. In this case, the second stage sample size m must be larger than 1 to enable unbiased variance estimation. In the present study, a theoretical and an empirical comparison of the conventional RBS and the SWOR variant was accomplished. Requiring a certain precision of the RBS estimation, the conventional RBS method is mostly more time-consuming than the variant with SWOR at the first stage. Only if m = 1 is chosen as second stage sample size for the SWOR RBS, this is often more time-consuming. In those cases, conventional RBS is up to 5% cheaper. In general, the larger m is, the more expensive is conventional RBS compared with the variant with swor at the first stage. The smaller the ratio of the variance between the primary units to the total variance of the estimate, the larger is the advantage of the SWOR variant. Generally, it can be shown that the gain of efficiency by SWOR is larger in case of weak correlations between auxiliary and target variable.

Cancino, Facultad de Ciencias Forestales, Universidad de Concepción, Chile E-mail: jcancino@udec.cl
Saborowski, Institut für Forstliche Biometrie und Informatik, Georg-August-Universität Göttingen, Germany E-mail: js@nn.de

article id 383, category Research article

Lena Gustafsson, Leif Appelgren, Anders Nordin. (2005). Biodiversity value of potential forest fertilisation stands, as assessed by red-listed and ‘signal’ bryophytes and lichens. Silva Fennica vol. 39 no. 2 article id 383. https://doi.org/10.14214/sf.383

Keywords: biodiversity; conservation; hemi-boreal forest; Sweden; threatened species

Abstract | View details | Full text in PDF | Author Info

In Sweden ca. 20 000 ha forestland is fertilised each year. By using red-listed and ‘signal’ bryophytes and lichens as indicators, we investigated whether forest stands planned for fertilisation have a biodiversity value, and thus if restrictions due to conservation aspects are motivated. Species occurrences were registered in detailed line-transect analysis, with a record size of 10 x 10 m, in 74 coniferous forest stands with a mean age of 57 years in East-Central Sweden. On the 230 ha totally surveyed, 10 red-listed and 37 signal species were found. The mean number of records ha–1 of red-listed bryophytes and lichens was 0.26 ha–1, which is considerably less than previously found in mature production stands and woodland key habitats. Red-listed species were found in 31% of the stands and signal species in 95%. More than 70% of all records of red-listed species and 30% of the records of the signal species were found in moist micro-sites. If rare bryophytes and lichens are to be preserved in fertilisation stands, improved instructions regarding avoidance of important micro-sites are needed.

Gustafsson, Swedish University of Agricultural Sciences, Department of Conservation Biology, Box 7002, SE-750 07 Uppsala, Sweden E-mail: lena.gustafsson@nvb.slu.se
Appelgren, Belfragegatan 34H, SE-462 37 Vänersborg, Sweden E-mail: la@nn.se
Nordin, Museum of Evolution, Botany, Norbyvägen 16, SE-752 36 Uppsala, Sweden E-mail: an@nn.se

article id 382, category Research article

Steen Magnussen, René I. Alfaro, Paul Boudewyn. (2005). Survival-time analysis of white spruce during spruce budworm defoliation. Silva Fennica vol. 39 no. 2 article id 382. https://doi.org/10.14214/sf.382

Keywords: mortality; hazard rates; defoliation stress index; Cox proportional hazard regression; Choristoneura fumiferana

Abstract | View details | Full text in PDF | Author Info

Mortality and defoliation (DF%) in 987 white spruce (Picea glauca (Moench) Voss) trees were followed from 1992 to 2003 during an outbreak of the spruce budworm Choristoneura fumiferana (Clem.) in 15 white-spruce-dominated uneven-aged stands in the Fort Nelson Forest District near Prince George, British Columbia. Four stands were aerially sprayed with Bacillus thuringiensis (Bt). Defoliation and mortality levels were elevated in non-sprayed stands. The relationship between defoliation and survival-times was captured in a Cox proportional hazard model with a defoliation stress index (DSI), diameter (DBH), crown class (CCL), a random stand effect, Bt-treatment, and number of years of exposure to stand-level defoliation (DYEAR) as predictors. The DSI, optimized for discrimination between survivors and non-survivors, is the discounted sum of five lagged DF% values. Survival probabilities were predicted with a maximum error of 0.02. Hazard rates increased by 0.06 for every one point increase in DSI. CCL and random stand effects were highly significant. Bt-treatment effects were fully captured by DSI, CCL, and DYEAR.

Magnussen, Canadian Forest Service, Victoria, BC, Canada. V8Z 1M5 E-mail: smagnussen@pfc.forestry.ca
Alfaro, Canadian Forest Service, Victoria, BC, Canada. V8Z 1M5 E-mail: ria@nn.ca
Boudewyn, Canadian Forest Service, Victoria, BC, Canada. V8Z 1M5 E-mail: pb@nn.ca

article id 381, category Research article

Jianxun Luo, Yuhua Wang, Helena Korpelainen, Chunyang Li. (2005). Allozyme variation in natural populations of Picea asperata. Silva Fennica vol. 39 no. 2 article id 381. https://doi.org/10.14214/sf.381

Keywords: allozymes; genetic variability; Picea asperata

Abstract | View details | Full text in PDF | Author Info

A survey of allozymic alleles and genetic diversity was conducted for ten natural populations of Picea asperata Mast. originating from the mountains of Southwest China. A total of twenty-seven alleles at seventeen loci were observed. Ten of the loci were found monomorphic. Our results showed that the populations sampled were characterized by low genetic diversity (mean He = 0.096) and a low level of inbreeding (mean Fis = 0.005). The UPGMA tree of genetic relationships indicated that there was significant differentiation among populations. The coefficient of genetic differentiation among populations, based on Fst, equaled 0.311. Such extensive inter-populational differentiation detected in P. asperata could have resulted from allele frequency divergence among populations, particularly, in one population. Introgression from another species, variation in environmental conditions, and differing selection pressures could be some of the factors attributing to significant differences among populations. In addition, our results showed that the geographic and genetic distances were not correlated in the populations of P. asperata. Based on the genetic information obtained, we concluded that monitoring appropriate genetic markers may be an effective means of identifying potential genetic changes occurring during forest tree evolution.

Luo, Sichuan Academy of Forestry, Chengdu 610081, P. R. China E-mail: jl@nn.cn
Wang, Chengdu Institute of Biology, Chinese Academy of Sciences, P.O. Box 416, Chengdu 610041, P. R. China; Graduate School of the Chinese Academy of Sciences, Beijing 100039, P. R. China E-mail: yw@nn.cn
Korpelainen, Department of Applied Biology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: hk@nn.fi
Li, Chengdu Institute of Biology, Chinese Academy of Sciences, P.O. Box 416, Chengdu 610041, P. R. China E-mail: licy@cib.ac.cn

article id 380, category Research article

Tapani Repo, Janne Laukkanen, Raimo Silvennoinen. (2005). Measurement of the tree root growth using electrical impedance spectroscopy. Silva Fennica vol. 39 no. 2 article id 380. https://doi.org/10.14214/sf.380

Keywords: willow; CNLS-curve fitting; displacement method; distributed electric model; hydroponics; impedance analysis

Abstract | View details | Full text in PDF | Author Info

The non-destructive evaluation of plant root growth is a challenge in root research. In the present study we aimed to develop electrical impedance spectroscopy (EIS) for that purpose. Willows (Salix myrsinifolia Salisb.) were grown from cuttings in a hydroponic culture in a growth chamber. Root growth was monitored at regular intervals by a displacement method and compared with the EIS parameters of the plants. To measure its impedance spectrum (IS) (frequency range from 40 Hz to 340 kHz) each plant was set in a measuring cell filled with a solution of the hydroponic culture. The IS was measured using a two-electrode measuring system. A silver needle electrode was connected to the stem immediately above the immersion level and a platinum wire was placed in the solution. The measurements were repeated twice weekly for a root growth period of one month. The IS of the entity consisting of a piece of stem, roots and culture solution were modelled by means of an electric circuit consisting of two ZARC-Cole elements, one constant-phase element, and a resistor. On the plant basis, an increase in root volume by growth correlated with a reduction in the sum of resistances in the ZARC-Cole elements (mean Pearson’s correlation coefficient r = –0.70).

Repo, The Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: tapani.repo@metla.fi
Laukkanen, University of Joensuu, Department of Physics, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: jl@nn.fi
Silvennoinen, University of Joensuu, Department of Physics, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: rs@nn.fi

article id 400, category Research article

Antti Mutanen, Anne Toppinen. (2005). Finnish sawlog market under forest taxation reform. Silva Fennica vol. 39 no. 1 article id 400. https://doi.org/10.14214/sf.400

Keywords: forest taxation; reforms; roundwood supply; simultaneous equations

Abstract | View details | Full text in PDF | Author Info

The stepwise transition in forest taxation from site productivity tax to taxation of profits from timber sales was one of the major institutional changes to impact Finnish non-industrial private forest owners in the 1990s. In this study the effect of the forest taxation reform on the aggregate supply of sawlogs was investigated using time series analysis and quarterly data. In particular, we estimated two simultaneous equations systems for the pine and the spruce sawlog markets. According to the results, the forest taxation reform strengthened the supply of spruce and pine sawlogs in the anticipatory stage of the taxation reform in 1992. Also during the fiscal transition period, which started in 1993, the supply effect of the taxation reform has clearly been positive. The strong own-price elasticity of sawlog supply found in this study indicates high sensitivity to actual and expected wood price changes in the determination of sawlog supply in Finland. Furthermore, the results indicate that the theoretical assumption of a competitive market is suitable for the Finnish sawlog market, but that separate analysis of pine and spruce sawlogs provides additional insights into market behaviour.

Mutanen, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: antti.mutanen@metla.fi
Toppinen, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: at@nn.fi

article id 399, category Research article

Torjus F. Bolkesjø. (2005). Projecting pulpwood prices under different assumptions on future capacities in the pulp and paper industry. Silva Fennica vol. 39 no. 1 article id 399. https://doi.org/10.14214/sf.399

Keywords: paper industry; Norway; capacity; partial equilibrium model; pulpwood; prices

Abstract | View details | Full text in PDF | Author Info

Capacity changes in the pulp and paper industry affect demand for pulpwood and thus pulpwood prices. This paper analyzes the impacts on roundwood prices in Norway of two possible capacity changes (one new machine and one close-down) that currently are high on the agenda in the Norwegian paper industry, and assesses the generality of the results obtained from these case studies. The two cases are implemented exogenously into a regionalized partial equilibrium forest sector model, and the capacity change scenarios are compared with a business as usual scenario assuming no demand shocks. The projected pulpwood prices change significantly in regions near mills where capacity shifts, at least for the close-down case, but only moderately at an aggregated national level. The reduction in prices under the close-down studied is higher than the price increase from the possible capacity increase case. The asymmetric price responses projected for the two case studies are supported by sensitivity analyses on other regions and cases (technologies). For the capacity increase case it is shown that the level of the projected pulpwood price is sensitive to assumptions on base-year prices and transport costs of imported roundwood, but the magnitudes of the price increases projected as a result of increased demand are less affected by these assumptions.

Bolkesjø, Norwegian University of Life Sciences, Dept. of Ecology and Natural Resource Management, Høyskoleveien 14, NO-1432 Ås, Norway E-mail: torjus.bolkesjo@umb.no

article id 398, category Research article

Heikki Ovaskainen. (2005). Comparison of harvester work in forest and simulator environments. Silva Fennica vol. 39 no. 1 article id 398. https://doi.org/10.14214/sf.398

Keywords: time study; single-grip harvester; harvester simulator; working technique; PlusCan

Abstract | View details | Full text in PDF | Author Info

Harvester simulators offer a safe and cost-saving method for studying the basics of harvester controls and working technique. Therefore, harvester simulators are increasingly being used in the education of harvester operators. In this study, the objective was to compare harvester work in real and simulator environments, and to determine how a professional harvester operator’s working technique may have changed in the simulator environment. Specific features of the simulator that encumbered operators’ normal work are also presented; and the correspondence of the simulator to reality is evaluated. The work of six professional harvester operators was studied in thinning and in clear cutting stands in both environments: first in the real forest and thereafter on the simulator. The results indicate that the operators’ working technique on the simulator was mainly the same as in the real forest. This means that the same restrictions are valid on the simulator as in the forest. The basic principles of harvesting must be known so that high productivity and good quality can be obtained. However, certain simulator-specific features encumbered the work of harvester operators. Limited visibility to the side increased the need to reverse and the 3D-visualization caused failed catches. Improvements in software would remove some of the defects, e.g. failed felling and cheating in the felling phase. These results also indicate that simulators can be used for research purposes.

Ovaskainen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: heikki.ovaskainen@joensuu.fi

article id 397, category Research article

Nuutti Kiljunen. (2005). Pricing the risk of the quality-guarantee in a stand establishment service. Silva Fennica vol. 39 no. 1 article id 397. https://doi.org/10.14214/sf.397

Keywords: quality; forest regeneration; risk; guarantee

Abstract | View details | Full text in PDF | Author Info

A stand-establishment service concept with quality guarantee was analysed. Here, the quality of stand establishment was assessed as the density of good quality seedlings evenly distributed on the plantation three years after planting. The amount of adequate premiums for the guarantee service and the risks accumulating to the service provider were studied. Monte Carlo simulation was used as a tool for analyzing the risks accumulating to the service provider of the stand-establishment in operational environments of different sizes. The premiums calculated to cover the expected amount of claims caused by the plantations not meeting the pre-set criteria were about 4–8% in addition to the approximated costs of stand establishment. The criteria used for determining the success or failure in a stand have a marked effect on the amount of premiums with a reasonable risk of ruin.

Kiljunen, Finnish Forest Research Institute, Suonenjoki Research Station, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: nuutti.kiljunen@metla.fi

article id 396, category Research article

Timo Pukkala, Mikko Kurttila. (2005). Examining the performance of six heuristic optimisation techniques in different forest planning problems. Silva Fennica vol. 39 no. 1 article id 396. https://doi.org/10.14214/sf.396

Keywords: genetic algorithms; simulated annealing; ecological planning; habitat suitability index (HSI); Hero; random search; tabu search

Abstract | View details | Full text in PDF | Author Info

The existence of multiple decision-makers and goals, spatial and non-linear forest management objectives and the combinatorial nature of forest planning problems are reasons that support the use of heuristic optimisation algorithms in forest planning instead of the more traditional LP methods. A heuristic is a search algorithm that does not necessarily find the global optimum but it can produce relatively good solutions within reasonable time. The performance of different heuristics may vary depending on the complexity of the planning problem. This study tested six heuristic optimisation techniques in five different, increasingly difficult planning problems. The heuristics were evaluated with respect to the objective function value that the techniques were able to find, and the time they consumed in the optimisation process. The tested optimisation techniques were 1) random ascent (RA), 2) Hero sequential ascent technique (Hero), 3) simulated annealing (SA), 4) a hybrid of SA and Hero (SA+Hero), 5) tabu search (TS) and 6) genetic algorithm (GA). The results, calculated as averages of 100 repeated optimisations, were very similar for all heuristics with respect to the objective function value but the time consumption of the heuristics varied considerably. During the time the slowest techniques (SA or GA) required for convergence, the optimisation could have been repeated about 200 times with the fastest technique (Hero). The SA+Hero and SA techniques found the best solutions for non-spatial planning problems, while GA was the best in the most difficult problems. The results suggest that, especially in spatial planning problems, it is a benefit if the method performs more complicated moves than selecting one of the neighbouring solutions. It may also be beneficial to combine two or more heuristic techniques.

Pukkala, University of Joensuu, Faculty of Forestry, P.O. BOX 111, FI-80101 Joensuu, Finland E-mail: timo.pukkala@forest.joensuu.fi
Kurttila, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: mk@nn.fi

article id 395, category Research article

Lauri Mehtätalo. (2005). Height-diameter models for Scots pine and birch in Finland. Silva Fennica vol. 39 no. 1 article id 395. https://doi.org/10.14214/sf.395

Keywords: mixed model; longitudinal analysis; random parameter; stand development

Abstract | View details | Full text in PDF | Author Info

Height-Diameter (H-D) models for two shade-intolerant tree species were estimated from longitudinal data. The longitudinal character of the data was taken into account by estimating the models as random effects models using two nested levels: stand and measurement occasion level. The results show that the parameters of the H-D equation develop over time but the development rate varies between stands. Therefore the development of the parameters is not linked to the stand age but to the median diameter of the basal-area weighted diameter distribution (DGM). Models were estimated with different predictor combinations in order to produce appropriate models for different situations. The estimated models can be localized for a new stand using measured heights and diameters, presumably from different points in time, and the H-D curves can be projected into the future.

Mehtätalo, Finnish Forest Research Institute, Joensuu Research Centre, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: lauri.mehtatalo@metla.fi

article id 394, category Research article

Rafael Calama, Gregorio Montero. (2005). Multilevel linear mixed model for tree diameter increment in stone pine (Pinus pinea): a calibrating approach. Silva Fennica vol. 39 no. 1 article id 394. https://doi.org/10.14214/sf.394

Keywords: mixed model; diameter increment; calibration; stone pine

Abstract | View details | Full text in PDF | Author Info

Diameter increment for stone pine (Pinus pinea L.) is described using a multilevel linear mixed model, where stochastic variability is broken down among period, plot, tree and within-tree components. Covariates acting at tree and stand level, as breast height diameter, density, dominant height or site index are included in the model as fixed effects in order to explain residual random variability. The effect of competition on diameter increment is expressed by including distance independent competition indices. The entrance of regional effects within the model is tested to determine whether a single model is sufficient to explain stone pine diameter increment in Spain, or if, on the contrary, regional models are needed. Diameter increment model can be calibrated by predicting random components using data from past growth measurements taken in a complementary sample of trees. Calibration is carried out by using the best linear unbiased predictor (BLUP) theory. Both the fixed effects model and the calibrated model mean a substantial improvement when compared with the classical approach, widely used in forest management, of assuming constancy in diameter increment for a short projection period.

Calama, CIFOR-INIA, Grupo Selvicultura Mediterranea, Apdo. 8111, 28080 Madrid, Spain E-mail: rcalama@inia.es
Montero, CIFOR-INIA, Grupo Selvicultura Mediterranea, Apdo. 8111, 28080 Madrid, Spain E-mail: gm@nn.es

article id 393, category Research article

Seppo Rouvinen, Anne Rautiainen, Jari Kouki. (2005). A relation between historical forest use and current dead woody material in a boreal protected old-growth forest in Finland. Silva Fennica vol. 39 no. 1 article id 393. https://doi.org/10.14214/sf.393

Keywords: Populus tremula; Pinus sylvestris; Picea abies; coarse woody debris; forest utilization; historical ecology; land-use history; nature conservation; spatial pattern analysis

Abstract | View details | Full text in PDF | Author Info

Assessing the human impact on the naturalness and vegetation characteristics of protected areas is one of the key issues when designing forest conservation networks in Fennoscandia. We studied the small-scale, detailed relationship between forest utilization history and the current availability of dead woody material in a protected old-growth forest area in North Karelia, eastern Finland. From the study area of 32.4 ha, all the stumps (diameter ≥ 5 cm and height < 1.3 m, classified as natural, man-made and of undetermined origin) were measured using 25 x 25 m sub-plots. Standing and fallen dead trees (dbh ≥ 5 cm) were measured on 50 x 50 m plots in an area of 7.8 ha. The average number of stumps was 130 per ha, and over half of the stumps were classified as man-made. However, the historical documents since the 1910s showed no logging in the area: some of the largest man-made stumps probably originated from an earlier time, but most of those stumps were made considerably later. The variation in the total number of stumps (per ha) was great (range 0–560/ha, 0–16 m2/ha), with no clear clustering in space. However, clustering of man-made stumps was detected. The average volume of pooled standing and fallen trees was 84 m3/ha, with a range of 37–146 m3/ha. The other noticeable man-made disturbance besides logging was notching of aspens, which has a scatteredly significant influence on the amount of dead trees. In conclusion, the protected old-growth forest was not as a whole in a natural state but showed different degrees of human impact from virtually untouched patches to quite heavily managed patches. The results suggest that the number of man-made stumps may be a relatively quick and easy method of assessing the naturalness of woody biomass structure in the Fennoscandian boreal forests.

Rouvinen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: seppo.rouvinen@joensuu.fi
Rautiainen, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ar@nn.fi
Kouki, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: jk@nn.fi

article id 392, category Research article

Veikko Huhta, Mika Räty. (2005). Soil animal communities of planted birch stands in central Finland. Silva Fennica vol. 39 no. 1 article id 392. https://doi.org/10.14214/sf.392

Keywords: forest management; birch; plantations; soil fauna

Abstract | View details | Full text in PDF | Author Info

The aim of this study was to compare soil animal communities in planted birch (Betula pendula) stands of different origin with each other and with natural forests. Six 30-year-old birch stands were investigated, three planted after clear-cutting of spruce stands, and three planted on cultivated soil. The faunal communities were markedly different in plantations established on spruce forest soil and on arable soil. “Birch after Spruce” communities were relatively similar to those of coniferous forests, though the population densities were generally lower. “Birch after Field” communities were sparse and could be characterised as “impoverished forest communities”, except in Lumbricidae and Enchytraeidae that have affinities with deciduous forests and cultural landscapes. Soil conditions are not sufficient to explain the differences between the forests. Colonisation and transport by man may determine the presence of certain species, especially earthworms. These in turn affect soil properties, and compete with or otherwise have negative effects on other soil fauna. Thus the community differences between different forests are an outcome of several factors: soil characteristics, site history, colonisation ability and interspecific interactions.

Huhta, Department of Biological and Environmental Science, University of Jyväskylä, P.O. Box 35, FI-40014 Jyväskylä University, Finland E-mail: v.huhta@pp.inet.fi
Räty, Ojalanlenkki 4, FI-80140 Joensuu, Finland E-mail: mr@nn.fi

Category : Review article

article id 369, category Review article

Jaroslaw Zawadzki, Chris J. Cieszewski, Michal Zasada, Roger C. Lowe. (2005). Applying geostatistics for investigations of forest ecosystems using remote sensing imagery. Silva Fennica vol. 39 no. 4 article id 369. https://doi.org/10.14214/sf.369

Keywords: remote sensing; spatial information; semivariance; semivariogram; forest classification

Abstract | View details | Full text in PDF | Author Info

Geostatistically based methods that utilize textural information are frequently used to analyze remote sensing (RS) images. The role of these methods in analyzing forested areas increased rapidly during the last several years following advancements in high-resolution RS technology. The results of numerous applications of geostatistical methods for processing RS forest images are encouraging. This paper summarizes such results. Three closely related topics are reviewed: 1) specific properties of geostatistical measures of spatial variability calculated from digital images of forested areas, 2) determination of biophysical forest parameters using semivariograms and characterization of forest ecosystem structure at the stand level, and 3) forest classification methods based on spatial information.

Zawadzki, Environmental Engineering Department, Warsaw Technical University, Ul. Nowowiejska 20, 00-653 Warsaw, Poland E-mail: jaroslaw.zawadzki@is.pw.edu.pl
Cieszewski, D. B. Warnell School of Forest Resources, University of Georgia, Athens, GA 30602, USA E-mail: cjc@nn.us
Zasada, Department of Forest Productivity, Faculty of Forestry, Warsaw Agricultural University, Poland E-mail: mz@nn.pl
Lowe, D. B. Warnell School of Forest Resources, University of Georgia, Athens, GA 30602, USA E-mail: rcl@nn.us

article id 378, category Review article

Yaoqi Zhang, Daowei Zhang, John Schelhas. (2005). Small-scale non-industrial private forest ownership in the United States: rationale and implications for forest management. Silva Fennica vol. 39 no. 3 article id 378. https://doi.org/10.14214/sf.378

Keywords: non-industrial private forest; forest land parcelization; timber supply; transaction costs; economic efficiency; land use change

Abstract | View details | Full text in PDF | Author Info

The transaction cost approach is used to explain why small non-industrial private forest (NIPF) ownerships are increasing in the U.S. We argue that the number of small NIPF owners have increased because: 1) a significant amount of forestland is no longer used economically if primarily for timber production, but rather for non-timber forest products and environmental services (particularly where population density is high), 2) when a person makes frequent use of non-timber products and services, owning forestland is more efficient for them because it saves the transaction costs involved in getting them from the market, 3) forestland parcelization takes place when non-timber value increases faster than timber value, and 4) marginal value for non-timber product is diminishing much faster than that for timber production. The paper also discusses implications of the parcelization of NIPF ownerships on forest management.

Zhang, School of Forestry & Wildlife Sciences, Auburn University, AL 36849-5418, USA E-mail: yaoqi.zhang@auburn.edu
Zhang, School of Forestry & Wildlife Sciences, Auburn University, AL 36849-5418, USA E-mail: dz@nn.us
Schelhas, Southern Research Station, USDA Forest Service, Tuskegee University, AL, USA E-mail: js@nn.us

article id 390, category Review article

Bengt Gunnar Jonsson, Nicholas Kruys, Thomas Ranius. (2005). Ecology of species living on dead wood – lessons for dead wood management. Silva Fennica vol. 39 no. 2 article id 390. https://doi.org/10.14214/sf.390

Keywords: forest management; saproxylic species; coarse woody debris; woodland key habitats; landscape planning; Fennoscandian forests; epixylic species

Abstract | View details | Full text in PDF | Author Info

Dead wood has been identified as a crucial component for forest biodiversity. Recent research has improved our understanding of habitat relations for many species associated with dead wood. However, the consequences for forest management are yet to be explored. In this review we build upon the growing volume of studies on dead wood dependent species, the dynamics of dead wood and ecological theory in order to identify the challenges for forest management at the landscape level. The review has a Fennoscandian focus, but the problems and challenges are similar in many forest ecosystems. We argue that it is necessary to 1) counteract the current shortage in availability of dead wood, 2) concentrate planning at the landscape level in order to minimize isolation and reduce edge effects, 3) create a variety of dead wood types, and 4) utilise available quantitative analytical tools. This calls for new approaches to management that to a large extent includes available knowledge, and to find platforms for planning forested landscapes with diverse holdings.

Jonsson, Mid Sweden University, Dept of Natural Sciences, SE-851 70 Sundsvall, Sweden E-mail: bengt-gunnar.jonsson@miun.se
Kruys, SLU, Dept of Forest Resource Management and Geomatics, SE-901 83 Umeå, Sweden E-mail: nk@nn.se
Ranius, SLU, Dept of Entomology, SE-750 07 Uppsala, Sweden E-mail: tr@nn.se

Category : Research note

article id 379, category Research note

Daniel Ligné, Lars Eliasson, Tomas Nordfjell. (2005). Time consumption and damage to the remaining stock in mechanised and motor manual pre-commercial thinning. Silva Fennica vol. 39 no. 3 article id 379. https://doi.org/10.14214/sf.379

Keywords: birch; Scots pine; cleaning; time study; brush saw; Husqvarna; Vimek

Abstract | View details | Full text in PDF | Author Info

Selective pre-commercial thinning (PCT) is usually carried out by workers with a brush saw in order to increase the growth of the potential crop trees (main stems) through removal of competing trees. In the last decade relative PCT costs have increased, partly because stands are denser and have higher trees when treated, which has led to new interest for mechanised PCT. The objective was to compare mechanised and motor manual PCT regarding productivity and damage to remaining main stems. Time consumption for, and damage after, mechanised and motor manual PCT were studied on 50 plots per treatment in mixed pine birch stands with an initial stand density exceeding 4500 stems ha–1. In the present study productivity was influenced by stand density, stand height and the quota between height and diameter. Irrespectively of these factors, mechanised PCT was 0.74 hours ha–1 slower than motor manual PCT. Motor manual PCT of the average stand (average height 3.69 m, 10 816 stems ha–1) took 5.06 effective hours. In average 2475 and 2805 main stems ha–1 were left after the mechanised and motor manual treatments, respectively, whereof 1.3 and 2.1% were damaged by the treatments. The results show that efficiency in motor manual PCT has increased in dense and tall stands compared to older studies. Motor manual PCT was more time effective than mechanised PCT, and thereby also even more cost-effective. However, the potential for technical and methodological development of mechanised PCT is probably larger than for motor manual PCT.

Ligné, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: dl@nn.se
Eliasson, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: lars.eliasson@norraskogsagarna.se
Nordfjell, Swedish University of Agricultural Sciences, Department of Silviculture, SE-901 83 Umeå, Sweden E-mail: tn@nn.se

article id 403, category Research note

Timo Saksa, Juha Heiskanen, Jari Miina, Jaakko Tuomola, Taneli Kolström. (2005). Multilevel modelling of height growth in young Norway spruce plantations in southern Finland. Silva Fennica vol. 39 no. 1 article id 403. https://doi.org/10.14214/sf.403

Keywords: Norway spruce; Picea abies; height growth; mounding; disc trenching; container seedlings; intra-level correlation; variance-component model

Abstract | View details | Full text in PDF | Author Info

Height development of Norway spruce (Picea abies (L.) Karst.) transplants was studied on 22 sites prepared by disc trenching or mounding. At the age of 4–9 years the plantations were surveyed using a multistage sampling design. For every planted spruce on a plot, the past annual height increments were measured as far into the past as possible. Multilevel mixed linear modelling was used to analyse the variation in growth at different levels (year, stand, cluster, plot, tree) and the effects of climatic and site characteristics on height growth. The within-plantation variation in height growth was higher on mounded sites than on disc-trenched sites. The mean temperature and the precipitation sum of the summer months affected height growth positively. Soil characteristics measured from undisturbed soil did not explain the height growth of seedlings on mounded sites, whereas on disc-trenched sites, the depth of the organic layer and the soil temperature had a positive effect and the depth of the eluvial horizon a negative effect. The modelling approach used proved to be a useful method for examining the sources of variation in development of young plantations.

Saksa, The Finnish Forest Institute, Suonenjoki Research Station, FI-77600 Suonenjoki, Finland E-mail: ts@nn.fi
Heiskanen, The Finnish Forest Institute, Suonenjoki Research Station, FI-77600 Suonenjoki, Finland E-mail: jh@nn.fi
Miina, The Finnish Forest Institute, Joensuu Research Centre, P. O. Box 68, FI-80101 Joensuu, Finland E-mail: jm@nn.fi
Tuomola, The University of Joensuu, Mekrijärvi Research Station, FI-82900 Ilomantsi, Finland E-mail: jt@nn.fi
Kolström, The University of Joensuu, Mekrijärvi Research Station, FI-82900 Ilomantsi, Finland E-mail: tk@nn.fi

article id 402, category Research note

Miina Rautiainen, Pauline Stenberg, Tiit Nilson. (2005). Estimating canopy cover in Scots pine stands. Silva Fennica vol. 39 no. 1 article id 402. https://doi.org/10.14214/sf.402

Keywords: Pinus sylvestris; Cajanus tube; LAI-2000 Plant Canopy Analyzer

Abstract | View details | Full text in PDF | Author Info

The way canopy cover is defined and measured influences the obtained canopy cover percentage. Estimates of canopy cover are needed, for example, in canopy radiation modelling and remote sensing applications and as a tool for political decision-making. In this paper, we demonstrated the use of two methods, the LAI-2000 Plant Canopy Analyzer instrument and the Cajanus tube, in Scots pine stands for canopy cover estimation, and also assessed the number of measurement points required for reliable estimates. The Cajanus tube yielded slightly larger canopy closure values than the LAI-2000 instrument, but the values were nevertheless in good agreement. Both of the methods required approximately 250 measurement points for canopy closure estimates of a stand to become relatively stable. We also present the first measured effective canopy transmittance values for Scots pine stands in Finland and an example of tree pattern mapping with the Cajanus tube.

Rautiainen, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: miina.rautiainen@helsinki.fi
Stenberg, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ps@nn.fi
Nilson, Tartu Observatory, EE-61602 Tõravere, Tartumaa, Estonia E-mail: tn@nn.ee

article id 401, category Research note

Kari Taulavuori, Marian Sarala, Jouni Karhu, Erja Taulavuori, Eero Kubin, Kari Laine, Jarmo Poikolainen, Erkki Pesonen. (2005). Elongation of Scots pine seedlings under blue light depletion. Silva Fennica vol. 39 no. 1 article id 401. https://doi.org/10.14214/sf.401

Keywords: Scots pine; blue light; elongation; high latitude

Abstract | View details | Full text in PDF | Author Info

The effect of blue light (400–500 nm) removal on the elongation of Scots pine (Pinus sylvetris L.) seedlings was investigated in a field experiment in Northern Finland during two growing seasons. The seedlings were grown in plexiglass chambers and ambient control plots. The blue wavelengths were removed from the light spectrum by using chambers made of orange plexiglass. The results of nearly daily measurements showed that the elongation of Scots pine seedlings was increased by the removal of blue light only at high latitudes.

Taulavuori, Department of Biology, University of Oulu, PO Box 3000, FI-90014, Oulu, Finland E-mail: ktaulavu@cc.oulu.fi
Sarala, Department of Biology, University of Oulu, PO Box 3000, FI-90014, Oulu, Finland E-mail: ms@nn.fi
Karhu, Muhos Research Station, Finnish Forest Research Institute, Kirkkosaarentie 7, FI-91500 Muhos, Finland E-mail: jk@nn.fi
Taulavuori, Department of Biology, University of Oulu, PO Box 3000, FI-90014, Oulu, Finland E-mail: et@nn.fi
Kubin, Muhos Research Station, Finnish Forest Research Institute, Kirkkosaarentie 7, FI-91500 Muhos, Finland E-mail: ek@nn.fi
Laine, Department of Biology, University of Oulu, PO Box 3000, FI-90014, Oulu, Finland E-mail: kl@nn.fi
Poikolainen, Muhos Research Station, Finnish Forest Research Institute, Kirkkosaarentie 7, FI-91500 Muhos, Finland E-mail: jp@nn.fi
Pesonen, Vantaa Research Centre, Finnish Forest Research Institute, PO Box 18, FI-01301, Vantaa, Finland E-mail: ep@nn.fi

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica