Current issue: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Silva Fennica vol. 43 no. 3 | 2009

Special issue: Forest Resources and Wood Quality

Category : Research article

article id 204, category Research article

Gaby Deckmyn, Bostjan Mali, Hojka Kraigher, Niko Torelli, Maarten Op de Beeck, Reinhart Ceulemans. (2009). Using the process-based stand model ANAFORE including Bayesian optimisation to predict wood quality and quantity and their uncertainty in Slovenian beech. Silva Fennica vol. 43 no. 3 article id 204. https://doi.org/10.14214/sf.204

Keywords: forest management; wood quality; Bayesian calibration; beech; forest model; mechanistic; red heart

Abstract | View details | Full text in PDF | Author Info

The purpose of this study was to expand an existing semi-mechanistic forest model, ANAFORE (ANAlysing Forest Ecosystems), to allow for the prediction of log quality and the accompanying uncertainty as influenced by climate and management. The forest stand is described as consisting of trees of different cohorts, either of the same or of different species (deciduous or coniferous). In addition to photosynthesis, transpiration, total growth and yield, the model simulates the daily evolution in vessel biomass and radius, parenchyma and branch development. From these data early and latewood biomass, wood tissue composition, knot formation and density are calculated. The new version presented here, includes the description of log quality, including red heart formation of beeches. A Bayesian optimisation routine for the species parameters was added to the stand model. From a given range of input parameters (prior), the model calculates an optimised range for the parameters (posterior) based on given output data, as well as an uncertainty on the predicted values. A case study was performed for Slovenian beech forests to illustrate the main model functioning and more in particular the simulation of the wood quality. The results indicate that the ANAFORE model is a useful tool for analyzing wood quality development and forest ecosystem functioning in response to management, climate and stand characteristics. However, the Bayesian optimization showed that the remaining uncertainty on the input parameters for the chosen stand was very large, due to the large number of input parameters in comparison to the limited stand data.

Deckmyn, Research Group Plant and Vegetation Ecology, University of Antwerpen, Universiteitsplein 1, 2610 Antwerpen, Belgium E-mail: gaby.deckmyn@ua.ac.be
Mali, Slovenian Forestry Institute, Vecna pot 2, 1000 Ljubljana, Slovenia E-mail: bm@nn.si
Kraigher, Slovenian Forestry Institute, Vecna pot 2, 1000 Ljubljana, Slovenia E-mail: hk@nn.si
Torelli, Slovenian Forestry Institute, Vecna pot 2, 1000 Ljubljana, Slovenia E-mail: nt@nn.si
Op de Beeck, Research Group Plant and Vegetation Ecology, University of Antwerpen, Universiteitsplein 1, 2610 Antwerpen, Belgium E-mail: modb@nn.be
Ceulemans, Research Group Plant and Vegetation Ecology, University of Antwerpen, Universiteitsplein 1, 2610 Antwerpen, Belgium E-mail: rc@nn.be

article id 203, category Research article

Matti Maltamo, Jussi Peuhkurinen, Jukka Malinen, Jari Vauhkonen, Petteri Packalén, Timo Tokola. (2009). Predicting tree attributes and quality characteristics of Scots pine using airborne laser scanning data. Silva Fennica vol. 43 no. 3 article id 203. https://doi.org/10.14214/sf.203

Keywords: LIDAR; alpha shape; crown height; height metrics; k-MSN; timber quality

Abstract | View details | Full text in PDF | Author Info

The development of airborne laser scanning (ALS) during last ten years has provided new possibilities for accurate description of the living tree stock. The forest inventory applications of ALS data include both tree and area-based plot level approaches. The main goal of such applications has usually been to estimate accurate information on timber quantities. Prediction of timber quality has not been focused to the same extent. Thus, in this study we consider here the prediction of both basic tree attributes (tree diameter, height and volume) and characteristics describing tree quality more closely (crown height, height of the lowest dead branch and sawlog proportion of tree volume) by means of high resolution ALS data. The tree species considered is Scots pine (Pinus sylvestris), and the field data originate from 14 sample plots located in the Koli National Park in North Karelia, eastern Finland. The material comprises 133 trees, and size and quality variables of these trees were modeled using a large number of potential independent variables calculated from the ALS data. These variables included both individual tree recognition and area-based characteristics. Models for the dependent tree characteristics to be considered were then constructed using either the non-parametric k-MSN method or a parametric set of models constructed simultaneously by the Seemingly Unrelated Regression (SUR) approach. The results indicate that the k-MSN method can provide more accurate tree-level estimates than SUR models. The k-MSN estimates were in fact highly accurate in general, the RMSE being less than 10% except in the case of tree volume and height of the lowest dead branch.

Maltamo, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: matti.maltamo@joensuu.fi
Peuhkurinen, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jp@nn.fi
Malinen, Finnish Forest Research Institute, Joensuu Research Unit, FI-80101 Joensuu, Finland E-mail: jm@nn.fi
Vauhkonen, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jv@nn.fi
Packalén, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: pp@nn.fi
Tokola, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: tt@nn.fi

article id 202, category Research article

Tuula Nuutinen, Antti Kilpeläinen, Hannu Hirvelä, Kari Härkönen, Veli-Pekka Ikonen, Reetta Lempinen, Heli Peltola, Lars Wilhelmsson, Seppo Kellomäki. (2009). Future wood and fibre sources – case North Karelia in eastern Finland. Silva Fennica vol. 43 no. 3 article id 202. https://doi.org/10.14214/sf.202

Keywords: National Forest Inventory; fibre length; wood density; proportion of latewood; forest scenario analysis

Abstract | View details | Full text in PDF | Author Info

Information on the potential wood supply is important for the wood industry. In this study, the future development of growing stock, cutting potential and wood properties corresponding to the regional scenario of North Karelian Forest Programme 2006–2010 was analysed. The simulations were performed by employing the Finnish MELA system together with the sample plot and tree data of the 9th Finnish National Forest Inventory (NFI9) as initial data for the simulations. Disc-based models for basic wood density, proportion of latewood and fibre length of Norway spruce and Scots pine in Sweden were calibrated and integrated into the MELA system. The wood properties at breast height of both harvested and standing trees were analysed in different strata (age, site type and cutting method) during the scenario period of 50 years (2002–2052). The average wood properties within the same strata varied only slightly over time. However, the results for different strata differed considerably. In general, wood density, fibre length and proportion of latewood increased, on average, as a function of tree age and along with a decrease in site fertility (excl. wood density and proportion of latewood in harvested Norway spruce in the first case and fibre length in the latter case for both species). For trees less than 80 years, properties in harvested trees were equal to or slightly greater than those of standing trees. The values for clear-cuttings were greater or equal to those of thinnings (excl. wood density and proportion of latewood in Norway spruce). The study demonstrates the value of model-based analyses utilising NFI tree measurements in regions that are considered to be sources of raw material.

Nuutinen, European Forest Institute, Torikatu 34, FI-80100 Joensuu, Finland E-mail: tuula.nuutinen@efi.int
Kilpeläinen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ak@nn.fi
Hirvelä, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: hh@nn.fi
Härkönen, Finnish Forest Research Institute, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: kh@nn.fi
Ikonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: vpi@nn.fi
Lempinen, Finnish Forest Research Institute, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: rl@nn.fi
Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
Wilhelmsson, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: lw@nn.fi
Kellomäki, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi

article id 201, category Research article

Rui Qi, Véronique Letort, Mengzhen Kang, Paul-Henry Cournède, Philippe de Reffye, Thierry Fourcaud. (2009). Application of the GreenLab model to simulate and optimize wood production and tree stability: a theoretical study. Silva Fennica vol. 43 no. 3 article id 201. https://doi.org/10.14214/sf.201

Keywords: wood quality; optimization; biomechanics; FSPM; Particle Swarm Optimization; source-sink dynamics; biomass allocation

Abstract | View details | Full text in PDF | Author Info

The GreenLab model was used to study the interaction between source-sink dynamics at the whole tree level, wood production and distribution within the stem, and tree mechanical stability through simulation and optimization. In this first promising numerical attempt, two GreenLab parameters were considered in order to maximize wood production: the sink strength for cambial growth and a coefficient that determines the way the biomass assigned to cambial growth is allocated to each metamer, through optimization and simulation respectively. The optimization procedure that has been used is based on a heuristic optimization algorithm called Particle Swarm Optimization (PSO). In the first part of the paper, wood production was maximized without considering the effect of wood distribution on tree mechanical stability. Contrary to common idea that increasing sink strength for cambial growth leads to increasing wood production, an optimal value can be found. The optimization results implied that an optimal source and sink balance should be considered to optimize wood production. In a further step, the mechanical stability of trees submitted to their self weight was taken into account based on simplified mechanical assumptions. Simulation results revealed that the allocation of wood at the stem base strongly influenced its global deformation. Such basic mechanical criterion can be an indicator of wood quality if we consider further the active biomechanical processes involved in tree gravitropic responses, e.g. formation of reaction wood.

Qi, Ecole Centrale Paris, Laboratory of Applied Mathematics, Grande Voie des Vignes, 92295 Chatenay-Malabry, France; Institute of Automation, Chinese Academy of Sciences, LIAMA/NLPR, P.O.Box 2728, Beijing, China E-mail: qiruitree@gmail.com
Letort, Ecole Centrale Paris, Laboratory of Applied Mathematics, Grande Voie des Vignes, 92295 Chatenay-Malabry, France E-mail: vl@nn.fr
Kang, Institute of Automation, Chinese Academy of Sciences, LIAMA/NLPR, P.O.Box 2728, Beijing, China E-mail: mk@nn.cn
Cournède, Ecole Centrale Paris, Laboratory of Applied Mathematics, Grande Voie des Vignes, 92295 Chatenay-Malabry, France; INRIA saclay Ile-de-France, EPI Digiplant, Parc Orsay Université, 91893 Orsay cedex, France E-mail: phc@nn.fr
Reffye, INRIA saclay Ile-de-France, EPI Digiplant, Parc Orsay Université, 91893 Orsay cedex, France; CIRAD, UMR AMAP, Montpellier, F-34000 France E-mail: pdr@nn.fr
Fourcaud, CIRAD, UMR AMAP, Montpellier, F-34000 France E-mail: tf@nn.fr

article id 200, category Research article

Peder Gjerdrum, Mauro Bernabei. (2009). Three-dimensional spiral grain pattern in five large Norway spruce stems. Silva Fennica vol. 43 no. 3 article id 200. https://doi.org/10.14214/sf.200

Keywords: grain angle; 3D-model; tree helix; split disk

Abstract | View details | Full text in PDF | Author Info

There is a great deal of interest involved in investigating and understanding grain angle in trees. The objective of the study presented in this paper has been to identify a joint, three-dimensional model for grain angle in stems of Norway spruce (Picea abies (L.) Karst.) Five large spruce trees were sampled. Transverse disks were extracted at regular intervals along the stem, split through the pith with a blunt knife, and observed for grain angle and cambial age along the north radius, setting pith observation to zero angle. The overall finding confirmed grain pattern congruent to distance from pith along the stem, a pattern that varies from tree to tree. Models expressing distance from the pith in cambial age performed slightly better than models in spatial distance. Grain pattern changed slightly along the stem, and this change was found to be consistent for the five stems: the left-handed grain angle in the juvenile wood was more pronounced upwards in the stem, and the angle changed faster towards right-handed spiralling. The model did not account for grain variation related to knots, undulating pith or other irregularities. Model residuals were normally distributed and seemingly homogeneous for all trees and for all height levels. The model is an extension of existing two-dimensional models for stem cross-cuts. After verification in a wider sample, the results should be applicable in tree and wood modelling.

Gjerdrum, Norwegian Forest and Landscape Institute, P.O. Box 115, N-1431 Ås, Norway E-mail: peder.gjerdrum@skogoglandskap.no
Bernabei, Norwegian Forest and Landscape Institute, P.O. Box 115, N-1431 Ås, Norway E-mail: mb@nn.no

article id 199, category Research article

R. Edward Thomas. (2009). Modeling the relationships among internal defect features and external Appalachian hardwood log defect indicators. Silva Fennica vol. 43 no. 3 article id 199. https://doi.org/10.14214/sf.199

Keywords: modeling; hardwood; log defects; surface scan

Abstract | View details | Full text in PDF | Author Info

As a hardwood tree grows and develops, surface defects such as branch stubs and wounds are overgrown. Evidence of these defects remain on the log surface for decades and in many instances for the life of the tree. As the tree grows the defect is encapsulated or grown over by new wood. During this process the appearance of the defect in the tree’s bark changes. The defect becomes flatter and its dimension changes. This progressional change in appearance is predictable, permitting the size and location of the internal defect to be reliably estimated. This paper concerns the development and analysis of models for the prediction of internal features. With the advent of surface scanning and external detection systems, the prediction of internal features promises to significantly improve the quality, yield, and value of sawn wood products.

Thomas, USDA Forest Service, 241 Mercer Springs Road, Princeton, WV 24740, USA E-mail: edthomas@gmail.com

article id 198, category Research article

Henrik Heräjärvi. (2009). Effect of drying technology on aspen wood properties. Silva Fennica vol. 43 no. 3 article id 198. https://doi.org/10.14214/sf.198

Keywords: stability; heat treatment; modification; press drying; strength

Abstract | View details | Full text in PDF | Author Info

Heräjärvi, Metla, Joensuu Research Unit, Box 68, FI-80101 Joensuu, Finland E-mail: henrik.herajarvi@metla.fi

article id 197, category Research article

Veli-Pekka Ikonen, Seppo Kellomäki, Heli Peltola. (2009). Sawn timber properties of Scots pine as affected by initial stand density, thinning and pruning: a simulation based approach. Silva Fennica vol. 43 no. 3 article id 197. https://doi.org/10.14214/sf.197

Keywords: three-dimensional modeling; sawing simulator; knots; Pinus sylvestris L.; shading

Abstract | View details | Full text in PDF | Author Info

The aim of this work was to analyze how different management schedules with varying initial stand density, thinning and artificial pruning of branches affect the quality, quantity and value of sawing yield in Scots pine (Pinus sylvestris L.). For this purpose, an integrated model system was employed and further developed to simulate: i) the three dimensional structure of the crown and stem of an average tree grown in a stand related to the changes in the within-stand light conditions as caused by the stand management, and ii) the sawing of logs into pieces and their quality grading based on the size and number of living and dead knots on the surfaces of sawn pieces. To maximize the quality of sawn timber, relatively dense stand is desired in the early phase of the rotation to reduce, especially in the lower part of stem, the growth of branches, and to increase the rate of dying and pruning-off of branches. In the later phase, a relatively sparse stand is desired to increase the self-pruning of branches and the occlusion of knots. However, in any case, artificial pruning is needed to maximize the knot-free zone of the stem. Also the value optimization of individual sawn pieces affects the quality and value of sawn timber. Because, only average tree was simulated, the differences between scenarios for stem volume were small. In the future, further model development is needed to analyze the development of crown and stem properties of trees with different status in a stand.

Ikonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: veli-pekka.ikonen@joensuu.fi
Kellomäki, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: sk@nn.fi
Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi

article id 196, category Research article

Aaron R. Weiskittel, Laura S. Kenefic, Robert S. Seymour, Leah M. Phillips. (2009). Long-term effects of precommercial thinning on the stem dimensions, form and branch characteristics of red spruce and balsam fir crop trees in Maine, USA. Silva Fennica vol. 43 no. 3 article id 196. https://doi.org/10.14214/sf.196

Keywords: Acadian Forest; growth and yield; Abies balsamea; Picea rubens; precommercial thinning

Abstract | View details | Full text in PDF | Author Info

The effects of precommercial thinning (PCT) on stem dimensions, form, volume, and branch attributes of red spruce [Picea rubens Sarg.] and balsam fir [Abies balsamea (L.) Mill.] crop trees were assessed 25 years after treatment in an even-aged northern conifer stand. Treatments were a uniform 2.4 x 2.4-m spacing and a control (no PCT). The PCT treatment significantly increased individual tree diameter at breast height (DBH), height growth, crown ratio, and crown width, while it reduced the tree height to DBH ratio. PCT also significantly increased stem taper and consequently, regional volume equations overpredicted observed stem volume by 2 to 15%, particularly for the spaced trees. PCT also increased the number and maximum size of branches on the lower bole. The sizes of knots on half of the sampled spruce crop trees in the spaced plots precluded them from being used as select structural lumber; there were no other effects on log grade. Our findings indicate that PCT can have a long-term influence on the structural attributes of individual trees, and that improved stem-volume prediction equations are needed in the Acadian region of North America.

Weiskittel, School of Forest Resources, University of Maine, Orono, ME 04469, USA E-mail: aaron.weiskittel@umit.maine.edu
Kenefic, U.S. Forest Service, Northern Research Station, Bradley, ME 04411, USA E-mail: lsk@nn.us
Seymour, School of Forest Resources, University of Maine, Orono, ME 04469, USA E-mail: rss@nn.us
Phillips, School of Forest Resources, University of Maine, Orono, ME 04469, USA E-mail: lmp@nn.us

article id 195, category Research article

John R. Moore, Andrew J. Lyon, Gregory J. Searles, Leena E. Vihermaa. (2009). The effects of site and stand factors on the tree and wood quality of Sitka spruce growing in the United Kingdom. Silva Fennica vol. 43 no. 3 article id 195. https://doi.org/10.14214/sf.195

Keywords: wood quality; acoustics; timber properties; wood stiffness

Abstract | View details | Full text in PDF | Author Info

The extent and sources of variation in the wood quality of Sitka spruce (Picea sitchensis (Bong.) Carr.) were quantified using data collected from 64 stands in northern Britain. These stands were selected on the basis of elevation, latitude, longitude, yield class, initial spacing and the presence or absence of thinning. Dynamic modulus of elasticity (MOE) was calculated from measurements of stress wave velocity made on standing trees and qualitative descriptions were made of stem form. Dynamic MOE of individual trees ranged from 3.81 kN/mm² up to 12.29 kN/mm², with a mean of 7.71 kN/mm². Approximately 55 percent of the variation in dynamic MOE was due to differences between individual trees within a site, while 35 percent was due to differences between sites. The remaining 10 percent was due to differences between the measurements made on opposite sides of each tree. Variation in dynamic MOE at the site level was significantly influenced by yield class, elevation as well as by a number of the interactions between these factors and latitude, longitude and initial spacing. A multiple regression model incorporating these variables was able to explain 45 percent of the variation in dynamic MOE. Ramicorn branches were the most commonly recorded defect (37.2% of all live trees), followed by stem scarring and basal sweep (6.9% and 6.3%, respectively). Dynamic MOE was not influenced by stem straightness (p = 0.10) which indicates the utility of stress wave velocity measurements for segregating Sitka spruce stands based on potential grade recovery.

Moore, Centre for Timber Engineering, Napier University, 10 Colinton Road, Edinburgh EH10 5DT, United Kingdom E-mail: j.moore@napier.ac.uk
Lyon, Centre for Timber Engineering, Napier University, 10 Colinton Road, Edinburgh EH10 5DT, United Kingdom E-mail: ajl@nn.uk
Searles, Centre for Timber Engineering, Napier University, 10 Colinton Road, Edinburgh EH10 5DT, United Kingdom E-mail: gjs@nn.uk
Vihermaa, Department of Analytical and Environmental Chemistry, University of Glasgow, Glasgow, UK E-mail: lev@nn.uk

article id 194, category Research article

Ane Zubizarreta Gerendiain, Heli Peltola, Pertti Pulkkinen. (2009). Growth and wood property traits in narrow crowned Norway spruce (Picea abies f. pendula) clones grown in southern Finland. Silva Fennica vol. 43 no. 3 article id 194. https://doi.org/10.14214/sf.194

Keywords: fibre length; stem volume; height; diameter; wood density; earlywood; latewood

Abstract | View details | Full text in PDF | Author Info

We investigated the growth, yield, wood density traits and fibre properties in 13 narrow crowned Norway spruce (Picea abies f. pendula) clones grown at a spacing of 2 m x 1.5 m (about 3300 seedlings/ha) in a field trial established in 1988 in southern Finland on a forest soil. For comparison, we used 3 normal crowned Norway spruce (Picea abies (L.) Karst.) genetic entries grown as a mixture in the same trial representing southern Finnish breeding regions. We found that wood density traits and fibre properties showed, on average, lower phenotypic variation than growth and yield traits regardless of crown type. Narrow crowned clones also had, on average, lower stem volume and fibre length, but higher overall wood density. More over, the phenotypic correlations between studied growth and wood properties ranged, on average, from moderate (normal crown) to high (narrow crown). These results were opposite to previous findings for narrow and normal crowned genetic entries grown in narrower spacing (1 m x 1 m) in southern Finland. Thus, this indicates lower plasticity of narrow crowned clones to the increasing growing space compared to normal crowned ones, so, they should be grown at denser spacing in order to fully utilise its space efficiency capacity. However, this field trial was established as a mixture of normal and narrow crown trees, so that 90% of genetic entries were narrow crowned ones, and therefore the crown competition would be much higher for normal crowned trees when the whole trial would consist of that entry alone. In the latter case, we could expect significantly lower productivity of normal crowned genetic entries with this spacing.

Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: ane.zubizarreta@joensuu.fi
Peltola, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, FI-12600 Läyliäinen, Finland E-mail: pp@nn.fi

article id 193, category Research article

Jaume Gort, Ane Zubizarreta Gerendiain, Heli Peltola, Pertti Pulkkinen, Johanna Routa, Raimo Jaatinen. (2009). Differences in fibre properties in Scots pine (Pinus sylvestris L.) genetic entries grown at different spacing and sites. Silva Fennica vol. 43 no. 3 article id 193. https://doi.org/10.14214/sf.193

Keywords: fibre length; fibre width; genetic entry; growth; wood density; coarseness; spacing

Abstract | View details | Full text in PDF | Author Info

In forest breeding, stem volume growth and sawn timber quality indicators have been used as the most important selection traits for Scots pine, whereas less attention has been given to characteristics such as fibre properties. In the above context, we investigated the differences in fibre properties (i.e. fibre length, fibre width and coarseness) in 20 year old Scots pine (Pinus sylvestris L.) genetic entries as affected by spacing and site, but also the phenotypic correlations between fibre properties, yield and wood density. The study was based on materials harvested from 10 genetic entries grown in a spacing trial (site 1) in central Finland, with a current stand density of 2000 (spacing 1), 2000–2500 (spacing 2) and 4000 trees/ha (spacing 3). In order to study the effects of site, we harvested additional material (4 of 7 genetic entries same as on site 1) from a trial located in southern Finland with a corresponding stand density of 2000 trees/ha (site 2). On site 1, spacing 1 and 3, all average values for analysed fibre properties were similar. In spacing 2 average values were slightly higher. On site 2, the average values for different fibre properties were similar compared to the corresponding spacing 1 on site 1. Spacing affected (p < 0.05) all average fibre properties on site 1; as did also site, when comparing same genetic entries grown on both sites. Regardless of spacing and site, the phenotypic correlations between average fibre length, fibre width and coarseness showed, on average, moderate to strong correlation (p < 0.05). Fibre width showed, in general, low and positive phenotypic correlation with diameter at breast height, stem volume and wood density on site 1. However, as a whole, the ranking of genetic entries changed depending on the trait and spacing considered. Thus, no overall ranking between genetic entries was possible.

Gort, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jaume.gort@joensuu.fi
Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: azg@nn.fi
Peltola, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: hp@nn.fi
Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Karkkilantie E-mail: pp@nn.fi
Routa, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jr@nn.fi
Jaatinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Karkkilantie E-mail: rj@nn.fi

article id 192, category Research article

Heli Peltola, Jaume Gort, Pertti Pulkkinen, Ane Zubizarreta Gerendiain, Jouni Karppinen, Veli-Pekka Ikonen. (2009). Differences in growth and wood density traits in Scots pine (Pinus sylvestris L.) genetic entries grown at different spacing and sites. Silva Fennica vol. 43 no. 3 article id 192. https://doi.org/10.14214/sf.192

Keywords: genetic entry; stem volume; height; diameter; wood property traits; phenotypic correlation

Abstract | View details | Full text in PDF | Author Info

In forest breeding, stem volume has typically taken as the most important selection trait, whereas less attention has been given to wood density traits. In this work, we investigated the effects of spacing and genetic entry on the growth, yield and wood density traits in 20 year old Scots pines (Pinus sylvestris L.) based on 10 genetic entries harvested from a spacing trial (stand density range 2000–4000 trees/ha) in central Finland. In order to study also the site effects, we harvested additional material from a trial located in southern Finland (stand density of 2000 trees/ha). Compared to growth and yield properties, wood density traits showed a lower phenotypic variation. Phenotypic correlations among different traits were negative, and mostly moderate to high, suggesting that selection for one trait would simultaneously affect the others. In addition, moderate to strong phenotypic correlations were found among different wood density traits. Stem volume (V) and breast height diameter (DBH) were the largest in widest spacing, whereas in the densest one tree height (H) and latewood percentage were the highest. Genetic entry affected H and wood density traits regardless of spacing. When comparing two sites (with same stand density), genetic entry affected H, whereas site affected DBH and wood density traits. Ranking between genetic entries changed depending on the trait, spacing or site considered. Therefore, no overall ranking was possible. However, we could identify genetic entries having a high V and a relatively high wood density, showing potential for future forest regeneration material.

Peltola, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: heli.peltola@joensuu.fi
Gort, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jg@nn.fi
Pulkkinen, Finnish Forest Research Institute, Haapastensyrjä Breeding Station, Karkkilantie 247, FI-12600 Läyliäinen, Finland E-mail: pp@nn.fi
Zubizarreta Gerendiain, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: azg@nn.fi
Karppinen, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: jk@nn.fi
Ikonen, University of Joensuu, Faculty of Forest Sciences, FI-80101 Joensuu, Finland E-mail: vpi@nn.fi

article id 191, category Research article

Katri Luostarinen, Noora Huotari, Eila Tillman-Sutela. (2009). Effect of regeneration method on growth, wood density and fibre properties of downy birch (Betula pubescens Ehrh.). Silva Fennica vol. 43 no. 3 article id 191. https://doi.org/10.14214/sf.191

Keywords: coppice; fibre length; fibre width; regeneration methods; wood properties

Abstract | View details | Full text in PDF | Author Info

Short rotation tree stands, established by coppicing, are nowadays used mainly for energy purposes in Fennoscandia, but their usage for pulp raw material may increase in the future. Downy birch (Betula pubescens), which is commonly used for pulp production in boreal zone, has good sprouting capacity. However, it is not known if the fibre properties of sprout-originated downy birches differ from those of seed-originated ones. Therefore, fibre length and width of sprout- and seed-originated downy birches grown on fertile soil were measured at a stand age of 25 years. Additionally annual ring width, stem height and diameter, and wood density were studied to compare the growth and wood properties of sprout- and seed-originated birches. Annual rings were slightly wider in sprout- than in seed-originated birches, whereas no differences were observed in wood density. Fibres, too, were slightly longer and wider in sprout- than in seed-originated trees. Still these minor differences observed here are hardly significant for the industries using birch wood. Consequently downy birch wood from coppiced stands is well suited for pulp. The advantages of coppice, i.e. rapidity and low costs of establishment, productivity, and the ability of downy birch to grow on untypical forest sites, may even increase the importance of the wood coming from coppiced birch stands in the future.

Luostarinen, Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101, Joensuu, Finland E-mail: katri.luostarinen@joensuu.fi
Huotari, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: nh@nn.fi
Tillman-Sutela, Finnish Forest Research Institute, Muhos Research Unit, Kirkkosaarentie, FI-91500 Muhos, Finland E-mail: ets@nn.fi

Category : Commentary

article id 462, category Commentary

Jean-Michel Leban, Heli Peltola, Sanna Leinonen, Christine Todoroki, Sophie D'Amours, Barry Gardiner, Jim Goudie, Eini Lowell, Thomas Seifert, Erkki Verkasalo, Lars Wilhelmsson, Tuula Nuutinen. (2009). Preface. Silva Fennica vol. 43 no. 3 article id 462. https://doi.org/10.14214/sf.462

Abstract | View details | Full text in PDF | Author Info

The 6th IUFRO Workshop on Connection between Forest Resources and Wood Quality: Modelling Approaches and Simulation Software.

Leban, E-mail: jml@nn.fr
Peltola, University of Eastern Finland, School of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: heli.peltola@uef.fi
Leinonen, E-mail: sl@nn.fi
Todoroki, E-mail: ct@nn.nz
D'Amours, E-mail: sda@nn.ca
Gardiner, E-mail: bg@nn.uk
Goudie, E-mail: jg@nn.ca
Lowell, E-mail: el@nn.us
Seifert, E-mail: ts@nn.de
Verkasalo, Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101, Joensuu, Finland E-mail: erkki.verkasalo@metla.fi
Wilhelmsson, E-mail: lw@nn.se
Nuutinen, European Forest Institute, Torikatu 34, FI-80100 Joensuu, Finland E-mail: tuula.nuutinen@efi.int

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica