Articles containing the keyword 'biomassa'
Category : Article
A process-oriented tree and stand growth model is extended to be applicable to the analysis of timber quality, and how it is influenced by silvicultural treatments. The tree-level model is based on the carbon balance and it incorporates the dynamics of five biomass variables as well as tree height, crown base, and breast height diameter. Allocation of carbon is based on the conservation of structural relationships, in particular, the pipe model. The pipe-model relationships are extended to the whorl level, but in order to avoid a 3-dimensional model of entire crown structure, the branch module is largely stochastic and aggregated. In model construction, a top-down hierarchy is used where at each step down, the upper level sets constraints for the lower level. Some advantages of this approach are model consistency and efficiency of calculations, but probably at the cost of reduced flexibility. The detailed structure related with the branching module is preliminary and will be improved when more data becomes available. Model parameters are identified for Scots pine (Pinus sylvestris L.) in Southern Finland, and example simulations are carried out to compare the development of quality characteristics in different stocking densities.
-
Mäkelä,
E-mail:
am@mm.unknown
- Ikonen, E-mail: vi@mm.unknown
- Vanninen, E-mail: pv@mm.unknown
The study deals with the distribution of above-ground biomass of Vaccinium myrtillus L. along the vegetation continuum segregated by using phytosociological classification method composite clustering. The qualitative characteristics of forest sites corresponding to different vegetational clusters were defined on the basis of indirect gradient analysis of vegetation data and description of tree stand properties in stands in 160 sample areas in Southern Finland.
Six vegetation types differing from each other mainly in abundance of the most constant and dominant plant species were formed. Sample areas with rich grass-herb vegetation, as well as sample areas representing comparatively dry, barren site type were clearly separated from other groups of sample areas. Stand characteristics, particularly the proportional distribution of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) seems to be another important factor affecting the vegetation composition.
The lowest biomass values of blueberry were connected with herb-rich vegetation and shady spruce-dominated stands. Comparatively low values were connected to also other spruce-dominated sample areas. Pine-dominant or mixed pine-spruce stands the biomass values were significantly higher. Even if the site quality is essentially equal, the abundance relationships between Vaccinium myrtillus and other components of the ground vegetation may vary in wide ranges and cause difficulties in practical site classification.
The PDF includes a summary in English.
-
Kuusipalo,
E-mail:
jk@mm.unknown
A study based on four young Scots pines (Pinus sylvestris L.) showed that the number of needle-covered shoots per crown volume unit was independent on tree position representing a constant value of 600–700 shoots/m3. This was true, even though the total shoot number decreased with deteriorating tree position. In tree crown there were fourth-order shoots in good light conditions but only first- and second-order-shoots, when light conditions were poor. The length of shoots decreased in accordance with increasing order of the shoot.
The share of the needle biomass and growth increased, when the shoot order increased. Similarly, the share of needles increased with deteriorating tree position. This was especially true in the upper crown. On the other hand, the share of the crown from the total biomass and growth increased with improving tree position. The percentage of crown system of a dominant tree in a sparse stand was 64% of that of biomass and 83% of that of growth. The corresponding values for a suppressed tree in a dense stand were 36% and 35%. The growth of wood, bark and needles in crown systems was linearly correlated with prevailing light conditions around the branch. It is evident that the tree position and light condition within the stand control the wood, bark and needle growth in the crown system and their interrelationships.
The PDF includes a summary in English.
-
Viherä,
E-mail:
av@mm.unknown
- Kellomäki, E-mail: sk@mm.unknown
The distribution of the dry matter and nutrients in Scots pine (Pinus sylvestris L.) tree stock growing on a Vaccinium type site, ground vegetation, and humus were determined in the study. The greatest part of the dry matter in the tree was found in the stemwood. The living branches, roots, bark, needles and dead branches decreasing order of magnitude made up the rest of the biomass. The trees contained over 90%, the field layer vegetation 3% and the bottom layer vegetation 2% of the dry matter in the tree stand. The tree stock contained 86–95% of the total amount nutrients in the stand. The field layer vegetation contained less nutrients than the bottom layer vegetation. Nitrogen, however, was an exception, the amount being approximately the same in both vegetation layers.
The PDF includes a summary in English.
-
Lehtonen,
E-mail:
il@mm.unknown
The study deals with the relationship between biomass and coverage in ground vegetation of Vaccinium and Calluna forest types. The results show that the biomass of the field layer on both forest types can predict satisfactorily in both coverage values of some the most important species and groups of species. Their total height per plot was used as independent variables. The explaining power of the models constructed for Vaccinium type increased to approximately 57% and for the Calluna type to approximately 74% of the total variation in the amount of dry matter. When the biomass of the bottom layer was predicted using the same kind of variables, the explaining power for the Vaccinium type increased to approximately 35% of the total variation and for the Calluna type approximately 53% of the total variation in the amounts of dry matter. The models for field layer of both Vaccinium and Calluna types were quite well suited for describing the test material. In the case of the bottom layer, the constructed models were not suitable for describing the test material.
The PDF includes a summary in English.
-
Kellomäki,
E-mail:
sk@mm.unknown
The possibilities of using results of coverage analyses for estimating the dry matter content of the ground vegetation has been examined in this study. The material covers 150 sample areas, 400 m2 large, which represent ground vegetation of Myrtillus type in the final succession stage. When the material was subjected to linear regression analysis, the amount of dry matter in the field and ground layer has been used as dependant variables and the results of the coverage analysis as the independent variable.
The study shows that it is possible to predict satisfactorily the dry matter content of the ground vegetation by grouping the coverage, according to the coverage weight, into parts of equal size and the using them as independent explaining variables. In particular, the value of the prediction equation for the dry matter content of the field layer could be improved by using the height and density characteristics of the vegetation as explaining variables in addition to the coverage figures. Thus, slightly over 80% of the total variation of the dry matter content of the field layer could be predicted. In the case of the ground layer vegetation, the explaining power rose slightly above 70%.
The PDF includes a summary in English.
-
Kellomäki,
E-mail:
sk@mm.unknown
