Current issue: 58(5)
Articles containing the keyword 'iskutaivutuslujuus'
Category : Article
There are great impact forces in mechanized harvesting and wood yard in the mills which can cause breaks in timber. The impact strength of timber in green condition was tested in temperatures of +18°C and -18°C using sawn pieces (20 x 20 x 300 mm) of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), birch (Betula pendula Roth and B. pubescens Ehrh.), grey alder (Alnus incana L.) and aspen (Populus tremula L.). In addition, unbarked naturally round sticks (length 300 mm, diameter 15 and 35 mm) of the same species were tested.
The impact strength of round sticks was 1.5–4.4 times as great as that of sawn pieces. The reasons are possibly the avoidance of cell breaks at the surface as well as growth stresses. The frozen samples were clearly weaker than the unfrozen ones. As a rule, the impact bending strength increased with increased density of the species. However, the correlation varied greatly between species. If density was kept constant, an increase in the growth ring width decreased the impact strength. The reason may lie in the fracture mechanism.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Pietilä, E-mail: jp@mm.unknown
- Vihola, E-mail: rv@mm.unknown
Basic density and absorbed energy in impact bending were measured for 500 Norway spruce (Picea abies (L.) H. Karst.) samples from Northern and Southern Finland. Statistical analysis showed that the relationship between impact strength and basic density was significant and regression analysis showed that it was linear.
Furthermore, with constant density, the impact strength was higher in Northern than in Southern Finland. This was due to growth ring width: i.e. when density was kept constant the impact strength increased with decreasing growth ring width. In addition, when the growth ring width was kept constant, the basic density of wood was higher in Southern Finland than in Northern Finland.
The PDF includes a summary in English.
-
Saranpää,
E-mail:
ps@mm.unknown
