Articles containing the keyword 'rauduskoivu'
Category : Article
A computer model was developed for predicting knottiness of wood material of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.) and birch (Betula sp). The prediction included location of knots, their size and quality, i.e. if they are dead or living knots. The model suits best for tree species where branches are born at the base of shoots, in Finland such tree species is Scots pine.
The usefulness of the model was tested in the prediction of knots in wooden elements of joinery industry. According to the results, the shape of cross section affects the surface quality of elements. Especially useful is a quadratic cross section as it increases the probability to get a knotless surface.
The PDF includes an abstract in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
There are great impact forces in mechanized harvesting and wood yard in the mills which can cause breaks in timber. The impact strength of timber in green condition was tested in temperatures of +18°C and -18°C using sawn pieces (20 x 20 x 300 mm) of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), birch (Betula pendula Roth and B. pubescens Ehrh.), grey alder (Alnus incana L.) and aspen (Populus tremula L.). In addition, unbarked naturally round sticks (length 300 mm, diameter 15 and 35 mm) of the same species were tested.
The impact strength of round sticks was 1.5–4.4 times as great as that of sawn pieces. The reasons are possibly the avoidance of cell breaks at the surface as well as growth stresses. The frozen samples were clearly weaker than the unfrozen ones. As a rule, the impact bending strength increased with increased density of the species. However, the correlation varied greatly between species. If density was kept constant, an increase in the growth ring width decreased the impact strength. The reason may lie in the fracture mechanism.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
- Pietilä, E-mail: jp@mm.unknown
- Vihola, E-mail: rv@mm.unknown
Early growth of four different tree species (Pinus sylvestris L., Picea abies (L.) H. Karst., Larix sibirica Ledeb and Betula pendula Roth) 16–23 years after planting were compared in a field experiment of 16 square plots established on a stony, grove-like upland (Oxalis-Myrtillus forest type) in Southern Finland. This study gives additional results to the publication Folia Forestalia 386/1979.
At this early stage, the growth of the spruce stand was clearly slower than that of the other species for all parameters to be measured (height, diameter, and volume growth). Height growth was most rapid in the silver birch stand and diameter growth in the larch stand. No clear differences were found in the mean volume of the 100 thickest trees in the stand between the larch and silver birch.
The PDF includes a summary in English.
-
Parviainen,
E-mail:
jp@mm.unknown
The aim of this study was to examine the development of the cold acclimation of silver birch (Betula pendula Roth) seedlings. The effect of fertilization was also studied. The seedlings were two-year-old. As a comparison stump sprouts from the near-by forest were used. The seedlings were treated in temperatures of +5°C (= control), –5°C and –15°C four times with conductivity measurements and with ocular inspection.
There were no significant differences in cold acclimation between different fertilization treatments or between the fertilized seedlings and stump sprouts. This may have been due to the rapid cooling rate. The cold acclimation of the seedlings was registered well by the changes in the relative conductivity values. The differences between the relative conductivity values of different temperature treatments in August and the beginning of September were significant. However, in the end of September and especially October the values no longer differed significantly. Correlation proved good between the relative electrical conductivity tests and the ocular inspections of the damages.
The PDF includes a summary in English.
-
Romakkaniemi-Niemelä,
E-mail:
pr@mm.unknown
The objective of the study was to compare different reforestation methods on ploughed areas in Finnish Lapland. Four species were compared: Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst.), silver birch (Betula pendula Roth) and Siberian larch (Larix sibirica Ledeb.). The experiments were established in different parts of Lapland on different types of sites in 1970–72.
In Scots pine there was a difference of 15 percentage points in survival of seedlings between the best and worst methods of regeneration. Containerized seedlings and paper pot seedlings had the best survival rates. In Norway spruce the respective difference between sowing and planting was about 20 percentage points. In favour of planting. The survival rate can be increased by about 20 percentage points by selecting the right tree species. The average height varied from 25 cm (the sowed Norway spruce) to 179 cm (the planted silver birch) after 10 growing seasons. The birch was planted at the most fertile sites only. The longer time passed from the afforestation the clearer was the effect of the local growing conditions on the development of the seedlings. The elevation of the site was one factor seemed to influence the success of the seedlings.
The PDF includes a summary in English.
-
Pohtila,
E-mail:
ep@mm.unknown
- Pohjola, E-mail: tp@mm.unknown
Carbohydrates of the sap of six curly and four silver birches (Betula pendula f. carelica Sok. and B. pendula Roth) were analysed by gas chromatography as trimethylsilyl derivates both from hydrolysed and unhydrolyzed samples. Sorbitol was identified from silver birch sap only. In each of the two groups there were glucose and fructose. No other carbohydrates were discovered. The hydrolysis had no influence on the results.
The PDF includes a summary in English.
-
Pätiälä,
E-mail:
rp@mm.unknown
- Blomberg, E-mail: kb@mm.unknown
- Paakkanen, E-mail: jp@mm.unknown
- Piepponen, E-mail: sp@mm.unknown
The ash content has been found to correlate with the fertility of peatlands. Relationship between height of 80-year-old stands and ash content of peat in topmost 30 cm layer was examined in Lithuanian conditions. On drained peatlands with ash content of peat from 3% to 8% pine stands increase in height. Ash content of peat being about 7% Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) H. Karst.) stands on drained sites are found to be of equal height. Ash content of peat more than 8–9% has no significant effect on growth of pine or spruce stands. Birch (Betula verrucosa (B. Pendula Roth.) and Betula pubescens Erhrh.), stands are less sensitive to ash content of peat compared with other species. Black alder (Alnus glutinosa L. Gaertn.) stands occurred in sites with ash content of peat more than 8–10%. The height of the stands become equal both in drained and undrained sites in the cases where ash content of peat is about 16–18%. Ash (Fraxinus exelsior L.) stands attain high productivity on drained sites with ash content of peat about 20%.
The PDF includes a summary in English.
-
Kapustinskaité,
E-mail:
tk@mm.unknown
The aim of the present study was to assess whether two-year old Betula verrucosa Ehrh. (now Betula pendula Roth.) transplants can be used in afforestation of drained peatlands and what factors affect the development of the young trees. The seedlings were planted in 1967. The site was repair planted next spring due to mortality caused by a undefined fungal disease, and the plantations were fertilized with NPK fertilizer (soil application. The seedlings were measured twice a year until the autumn 1970.
Only 28% of the original transplants, and 73.4% of the repair plantations were alive in 1970. In some cases, fertilization improved the results, while in others it was detrimental to the trees or had no effect on survival. According to peat analysis, the poor survival and development of the plants could be due to the too high ratios of N/Ca and N/P. Stunted or dead trees displayed often necrosis caused by Godronia multispora. According to the experiences, Betula verrucosa plantations are inferior to those obtained with Scots pine (Pinus sylvestris L.). In addition, the results indicate that in old draining areas calcium and phosphorus are often too low in comparison to nitrogen.
The PDF includes a summary in English.
-
Lehtiniemi,
E-mail:
tl@mm.unknown
- Sarasto, E-mail: js@mm.unknown
Category : Article
The objective of the present investigation was to clarify the profitability of pruning silver birch (Betula verrucosa, now Betula pendula Roth) in the growing of raw material for veneer industry. Calculations were made on the grade, value, and price of pruned and untreated butt logs as well as on costs of pruning and the development of pruned trees.
The grade distribution of unpruned veneer butt logs, the grade distribution of the veneer yield, and consequently, the value of veneer yield and log prices at the plant are considerably better than those of average logs. The grade, value and price increased with increasing diameter. The value and price of pruned butt logs depended primarily on the difference between the turning pruning diameters, and their increase with decreasing pruning diameter and increasing turning diameter. The value of pruned butt logs is always considerably higher than that of unpruned logs. The increase in the value correlates to the pruning and turning diameters, and is, for example, in rotary-cut logs which have been pruned when 10 cm in diameter 80–130%.
Pruning increases the stumpage in naturally regenerated silver birch stands on Oxalis-Myrtillus site by 2,000–3,000 Fmk/ha when employed at 20 years of stand age and rotary cutting at 60–80 years of age respectively. The average pruning costs on Oxalis-Myrtillus site are 51–57 Fmk/ha.
The PDF includes a summary English.
-
Heiskanen,
E-mail:
vh@mm.unknown
The objective of the investigation was to determine the differences between faultless timber grown on a peatland before and after draining, in respect of compressive strength to the grain, volume weight, and shrinkage. In addition, the influence of the boundary zone between the close-ringed wood formed before draining and the wide-ringed wood produced after draining on strength of the timber was studied. The material consisted of 15 sample trees of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), white birch (Betula pubescens Ehrh.) and silver birch (B. Pendula Roth).
The volume weight of wood of the tree species in ascending order is; spruce, pine, white birch, silver birch. The volume weight of Scots pine seems to decrease from the butt end upwards, while no trend was revealed for spruce. In the coniferous trees, the wide-ringed wood formed subsequent to draining was slightly lighter than the close-ringed wood produced prior draining. No distinct trend was seen in the birch species. The volume weight of pine and spruce increased with decreasing width of the growth rings up to a certain limit, after which the conditions inverted.
The compressive strength of the different kinds of wood seems to increase from the butt end upwards, but after height of two meters it begins to decrease considerably. In birch, this point of inversion is in somewhat greater height. In spruce timber, the compressive strength parallel to the grain is lowest for wood which contains exclusively wide-ringed wood formed after draining. The boundary zone between the woods formed before and after draining is very distinguishable, but has no remarkable influence on the compressive strength parallel to the grain. Shrinkage of close-ringed wood is higher in all three principal directions than that of wide-ringed wood. This can be explained by the variations in volume weight and fibrillar orientation of the tracheid walls.
The PDF includes a summary in English.
-
Ollinmaa,
E-mail:
po@mm.unknown
The investigation concerns with the strength of the eccentric growth accompanying formation of tension wood in silver birch (Betula pendula Roth.) and downy birch (Betula pubescens Ehrh.), behaviour of wood in wood-working machines and its macroscopic characteristics, its microscopic and sub-microscopic structure, chemical composition, resistance against certain chemicals, physical properties, and the strength characteristics of wood.
The most detrimental properties of tension wood used in wood working industry are high longitudinal shrinkage, warping, twisting and checking. The wooliness of the cut is unwanted, for instance, in plywood and furniture. In pulp industry tension wood is better raw material than normal wood because it yields more and purer cellulose than normal wood. However, it has poorer strength properties.
The PDF includes a summary in English.
-
Ollinmaa,
E-mail:
po@mm.unknown
Birches’ (Betula sp.) ability to grow sprouts is low. The stump grows root collar and stump shoots, but the stump shoots are not proper stump shoots that will grow from the space between wood and bark. The buds are situated very low in the base, even under the ground. In this study, no actual root shoots could be found. Also the bushy alpine birches seem to be formed from stump and root collar shoots.
In Southern Finland silver birch (Betula pendula Roth) is more common than downy birch (Betula pubescens Ehrh.) in dry upland forest sites, while downy birch is common in fresh mineral soil forests and peatlands. In Northern Finland downy birch is the dominant birch species. Of the two species downy birch has markedly better capacity to form stump and root collar shoots both in Northern and Southern Finland. In general, birches grow sprouts much more strongly in Northern Finland.
Growth of the shoots is fastest during the first year after the felling of the parent tree and slows down gradually. The stump shoots may get separated from the stump when the stump decays, and the decay may also spread to the shoots. It is common that the shoots have no own roots, and die along with the stump. The shoots may have own root system or use roots of the parent tree that have stayed alive, in the latter case decay spreads almost always from the stump to the shoot. Whether the tree was felled with axe or saw had no effect on sprouting, probably because the sprouting buds are situated in the base of the tree. The larger stumps had usually fewer sprouts than smaller stumps. The fertility of the site seemed to have little effect on sprouting, but more moist sites formed more sprouts.
Forest regeneration using sprouts may be possible in peatlands for firewood production. on mineral soil sites birch does not suit for coppicing. The proportion of trees originating from sprouts decreases strongly by the time. Consequently, in Southern Finland sprouts have little effect on regeneration of birch. In Northern Finland sprouting is the most important way of regeneration.
The PDF includes a summary in German.
-
Mikola,
E-mail:
pm@mm.unknown
