Containerized tree seedlings will be used on an increasing scale in the future in different parts of the world. There are number of techniques for the production of small one-year-old seedlings but it has not been possible to develop a completely satisfactory methods for large containerized seedlings production. In the long-term development of pine plantations established with containerized seedlings the greatest problem has been deformation of the root system. With a new method, based on a sheet of peat and root pruning, it has been possible to produce conifer seedlings with a good root regeneration potential and favourable morphological root system development. The use of small containerized seedlings allows an increase in planting density without any marked increase in regeneration costs.
The PDF includes an abstract in English.
Peat industry is rapidly expanding in Finland. Consequently, during next decades peat will be removed from thousands of hectares. Because timber production probably is the most rational use of this area after the peat production has ended, some experiments of afforestation of such areas have already been conducted. This article reports results of two experiments which were started in Kihniö, Western Finland, in 1953 and 1964.
In the first experiment fertilization with wood ash proved very effective whereas seeding and planting without fertilization resulted in almost complete failure. In the second experiment, interplanting with grey alder (Alnus glutinosa L. Gaertn.) greatly promoted the growth of Scots pine (Pinus sylvestris L.). The effect of slight fertilization lasted a few years only. The reasons for the remarkable effect of alder need further research. Although alder is known as a nitrogen-fixing plant, its beneficial effect was most clearly seen in the K and P contents of pine needles. Inoculation with mycorrhizal fungi was beneficial but not necessary. Experiments hitherto show that afforestation of bogs after peat removal is possible although some additional measures like fertilization or interplanting with alder may be needed.
The PDF includes a summary in English.
The planning of timber production in a forestry unit is divisible into two phases. In the first phase, planning provides the decision-maker with a number of possible timber production policies; these policies define the production possibility boundary. After the decision-maker has chosen one of these policies, planning moves to the second phase, in which a detailed programme is prepared with a view to meeting the requirements of the timber production policy accepted. The paper indicates one possibility of solving these two tasks simultaneously. In the first phase, the solution of the primal linear programming problem is employed and in the second phase the respective dual or shadow price solution.
The PDF includes a summary in English.
The study deals with economic significance of forest landscape planning models used in regional planning in Finland. The »judge»-method is used among professional foresters working on private forestry boards in Southern Finland to define their view of what would be moderate level of costs of landscape management for private forest owners. A sample of 154 forest professionals working in district forestry boards in Southern Finland was sent a sociological questionnaire.
It was possible to form three hierarchical moderation classes by statistical grouping of judgement distributions. Prolongations in rotation ages and restrictions concerning ditching of forested bogs, forest read building and clear-cutting were considered the most immoderate models. Rather or wholly insignificant were evaluated such management models, which mean restrictions in »old fashioned» methods or which are already used in practice.
The PDF includes a summary in English.
About one million hectares of forests are fertilized annually in Finland. The goal of the present study was to find out, by means of calculations, how the profitability of forest fertilization varies with variations in the stage of development of tree crops, the quality of the site and its geographical location. Calculations concerned bot fertilization of forests in mineral soil sites and in drained peatlands. The study is a part of a larger project concerning the order of profitability of different forest improvement measures in different conditions. The problems dealt with in this study were approached from the point of view of national economy.
On the basis of two empirical materials it is shown that there is a high correlation between the stand growth percentages before and after the fertilization. Applying the results to existing yield tables the authors calculate benefit/cost ratios showing the stage of development of the stand, the quality of the site and its geographical location. According to the results, fertilization is more profitable in sites of medium fertility than on poor sites. Profitability decreases rather fast from south to north and with decreasing timber prices.
The PDF includes a summary in English.
The purpose of this study was to compare the development of Scots pine (Pinus sylvestris L.) seedlings sown on substrates off milled peat and milled bark. Mille peat, ordinary milled bark, milled inner bark waste, and a mixture of milled peat and milled bark in the ratio of 1:1, were all compared in the plastic greenhouse. In addition, two fertilization applications were used with milled park: ordinary surface fertilization and double surface fertilization. The germination and development were measured twice during the summer.
It is concluded that milled bark seems to be a rather useful substrate for use in plastic greenhouses, as long as its special requirements are taken into consideration. In the first measurement, there were no differences between the treatments, in the second measurements seedlings growing on a mixture of peat and bark were slightly more developed than the others. Growth of the seedlings was slightly better in ordinary milled bark. Double surface fertilization increased disease and mortality compared to ordinary fertilization.
The PDF includes a summary in English.
The article is a report of a study tour of five Finnish foresters in Germany on September 27 – October 2. 1971. As in most industrial countries, the recreation use of forests is rapidly expanding and, therefore, its needs are considered in the management of forests. Two examples of intensively used recreation forests are described, Schönbuch near Stuttgart and the Bavarian Forest National Park at the Czechoslovakian border. These forests are effectively used for both timber production and recreation at the same time. Some other effects of urbanization on forests also are discussed in the article.
The PDF includes a summary in English.
The aim of this present study was to elucidate the quality of seed of foreign tree species grown in Finland, and the factors which have affected the quality of the seed yields. Due to the smallness of the material, however, no far-fetching conclusions can be drawn. The bulk of the seeds were collected in the fall of 1964. The samples of seeds were X-rayed and their classification to empty seeds and full seeds of four quality classes was done on the basis of the anatomical structures. The species studied (a total of 34 species) belonged to the following genera: Abies, Chamaecyparis, Larix, Picea, Pinus, Pseudotsuga, Thuja and Tsuga.
The percentage of empty seeds was throughout quite high. The reasons for the generation of empty seeds probably originate from the special nature of the stands from which the seeds were collected. As a rule, the stands were young and small in area, which may have caused weak pollination and self-pollination leading to embryo mortality. Also, insect damages were observed.
Seeds with albumen still discernible, although the embryo had died, occurred to some extent. In some Larix species, even the bulk of the seeds recorded as full belonged in this group.
The ripening of seeds with embryos was quite successful in spite of the fact that the temperature sum of the year of ripening was slightly below the average in Finland. For instance, all Abies species ripened almost completely.
According to the results, it can be expected that the tree species examined in this study are able to produce rich yields of good-quality seed in Finland, provided that the ovules are well pollinated and self-pollination does not take place to a large extent.
The PDF includes a summary in English.
Silva Fennica Issue 80 includes presentations held in 1952 in the 7th professional development courses, arranged for foresters working in the Forest Service. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes principles of breeding of forest trees and the selection of fast growing, healthy and qualitatively good trees, named plus trees, for seed production in Finland.
Silva Fennica issue 52 includes presentations held in professional development courses, arranged for foresters working in public administration in 1938. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes a study of forest management practices suitable for in Hylocomnium-Myrtillus site type forests, typical for Northern Finland. A special problem for the forest site type is poor regeneration due weak seed production of Norway spruce (Picea abies L. Karst.) and thick moss layer.
Silva Fennica issue 46 includes presentations held in professional development courses, arranged for foresters working in public administration in 1937. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes production of forest tree seedlings.
Silva Fennica Issue 39 includes presentations held in professional development courses in 1935 that were arranged for foresters working in public administration. The presentations focus on practical issues in forest management and administration, especially in regional level. The education was arranged by Forest Service.
This presentation describes cultivation of seedlings in forest nurseries.
Planning of large central tree nurseries, which has become topical in Finland, means that the seedlings will be used in a wide geographical area. The nursery must decide which proveniences of seeds of the different tree species it will use. This concerns also the customer that buys the seedlings. The planting and lifting of the seedlings in the nursery have to be timed so that the seedlings are in a right state of growth at the time of planting.
The growth of the seedlings can, under certain conditions, be promoted by using a slightly southerly seed provenience, and large-sized seeds. There are, however, limitations to how much the seeds can be transferred northwards. If the nursery lies much south of the planting site, the seedlings have started height growth at the time of planting. This applies especially larch (Larix sp.), Scots pine (Pinus sylvestris L.) and birch (Betula sp.), but affects less Norway spruce (Picea abies (L.) Karst.). The problem can be handled by using a cool storage space for the seedlings waiting for a delivery in the nursery.
According to an international study, seedlings grown from seeds collected in countries south from Finland usually die already during the first two years in the nursery. Within Finland the seeds can be transferred at least by two latitudes. Spruce seems to tolerate longer transfer. Seed orchards should be planted south of the seed’s origin to ensure better yield and better quality seeds.
The Silva Fennica issue 61 was published in honour of professor Eino Saari‘s 60th birthday.
The PDF includes a summary in German.
Temperatures needed in extracting Scots pine (Pinus sylvestris L.) seeds is relatively high, however, there is little information on its effect on germination of the seeds. This survey aimed at studying how different temperatures affect both extraction result and germination of Scots pine seeds. Comparisons between different temperatures (20, 30, 40, 50, 60 and 70 ºC) were made from cones collected from same sample trees, three trees in total.
Temperatures 20 and 30 ºC resulted in incomplete opening of the cones, and gave thus smaller amount of seeds. Complete extraction requires at the least the temperature of 40 ºC. The result is slightly better in 50 ºC, but germination of the seeds is little lower. Temperatures 60 and 70 ºC improve the results, but in the cost of germination. The main reason for lower germination percentage was that the higher temperatures release more empty and defective seeds from the cones. Results of different sample trees were different due to, for instance, quality and size of cones. Higher temperatures accelerated the extraction. According to the study, perfect extraction in 40 ºC requires longer extraction time than when the temperature of 50 ºC is used. In practice, 50 ºC temperature or even little higher temperatures can be used when the extraction time is shorter. Decessive factors in choosing the temperature would be the humidity of cones and length of extraction time.
The PDF includes a summary in German.
A survey was conducted to investigate the domestic trade of saw timber in Finland in 1932. The inquiry complemented the investigation of consumption of wood made at the same time. In 1932 there were 383 sawmills in Finland, the total production of which was 814,630 std (1 std = 4.672 m3). Only 12.9% of the production was sold in the home market. Of the domestic sales, the share of costal sawmills was 25.7% and the inland sawmills 74.3%. The domestic sales were proportionally largest (55.5%) in the smallest sawmills, and they decreased gradually as the production of the sawmill increased. Comparatively more of the sawn timber of birch is sold in the domestic market than of pine or spruce. The depression of the building trade that begun in 1930 affected the trade still in 1932.
The PDF includes a summary in English.
The northern range of small leaved lime (Tilia cordata Mill.) in Finland has remained the same since the end of 1800s, but according to the studies of subfossiles of lime found in peatlands, the northern limit has once been higher than at the present. The northernmost natural specimens of the species in Reisjärvi do not produce seed, and are therefore probably a relict. The article includes a review on the distribution of the species in Finland and its capacity to regenerate. The natural regeneration of lime in Finland is at present very rare. The species has lost its ability to sexual reproduction, but reproduces readily vegetatively.
The PDF includes a summary in German.
Annual variations in wood utilization makes it complicated to estimate the balance between wood utilization and wood production of forests. According to the article, the balance is unsustainable especially in the private forests in the southern part of Finland. The annual wood utilization of the country was 37.3 million m3 in 1913, and the annual wood production 35.2 million m3, according to a report of a committee that was appointed to find methods to prevent overcutting. The committee suggested legislation to forbid forest devastation. Also the growth of the forests could be increased, if the forests are well managed, the article argues. To prove this, the potential wood production capacity is estimated for the municipalities of Viipuri, Mikkeli and Kuopio, and compared to the present wood production and wood utilization of the area.
The PDF includes a German summary.
The fifth part of the six-article series about protection forest in Northern Finland outlines sustainable forest management practices for the Scots pine (Pinus sylvestris L.) forests in the pine timber line area. The author stresses the need to secure the seed production and regeneration capacity of the forests, and the growth and protection of seedlings. At the same time, the local communities’ need for timber has to be taken into account when considering the means to protect the pine forests. The main principle is not to cut more trees than has been regenerated during the time period between good seed years. The article outlines good forest management practices for the timber line area.
The article is divided in six parts. A German summary is in a separate PDF.
The aim of the present study was to explain how the Finnish paper industry increased its production and its exports, broadened its markets and managed to show a profit in its activities during the period between the two world wars, despite the restrictive international commercial policies then prevailing, and despite the economic depression of the thirties. Newsprint has been treated as a subject for detailed examination.
The study is based on a comparative investigation of the price received by the paper mills for their paper and the costs of production. Since the market price of paper fell during the twenty years in question, one must examine how the mills responded to the reduction in selling price. Technically the study ranges from the valuation of the standing timber to the handing over of the finished product to the buyer. Between 1929 and 1933 the cost of producing newsprint fell by 387 marks per ton.
The most significant factor in maintaining competitive power was the technical development and increased output brought about in the mills. That alone accounted for half the savings achieved. The reduction in the buying price of wood and in delivery costs accounted for about a third of the difference in production costs, and other factors for the remaining fifth. In addition, the devaluation of the Finnish mark was crucial. Measures taken to reduce costs were effective in so far as the paper mills, with only one or two exceptions, maintained their competitiveness in international markets and managed not only to retain but also to extend their markets.
The PDF includes a summary in English.
The aim of the present study was to describe the forest types of Finnish mineral forest lands as a uniform whole in the light of stand development and wood production.
The study shows that it has been possible to work out uniform age-based development series for different stand characteristics for forest types on mineral forest lands in Finland. There is generally a clear difference in the development series of various stand characteristics and their average values between different forest types. The exceptions in a few places have been explained as depending on certain factors. The differences between adjacent forest types in order of their quality are of varying magnitude, thus differing from a schematic site quality classification obtained through calculation. Consequently, each forest type has its own development series with regard to the stand characteristics.
The number of forest types in the whole country is rather high. However, the different forest types are limited to different parts cf the country in such a way that there is no need for more than 5–6 forest types and 4 northerly sub-forms (-types) in each region, except in the border areas between the regions. In Finland the forest types have been the basis of forest site classification in forest research and practical forestry over a period of half a century. In pointing out the necessity of further study of forest types, Cajander has stressed the examination of differences in the compositions of vegetation between different classes of density of tree-stand and building up average descriptions of vegetation in such classes in young, middle-age and old stands. The same may be caused by some other factors which also are of essential influence to the composition of the vegetation.
The PDF includes a summary in English.