Pertti Harstela , Leo Tervo

Taimikkopuun korjuumenetelmien vertailua.

Harstela P., Tervo L. (1978). Taimikkopuun korjuumenetelmien vertailua. Silva Fennica vol. 12 no. 2 article id 4991. https://doi.org/10.14214/sf.a14845

Abstract

A theoretical nomogram was made for estimating the costs of fully mechanized thinning and the driving speed of the machine. Based on this nomogram and the previous studies three harvesting methods were compared; systematic fully mechanized harvesting, selective fully mechanized harvesting, and manual felling combined with whole-tree chipping.

The third method was cheaper than the fully mechanized methods in a pole-stage stand. The choice of the most advantageous chipping station depended on conditions, but the smaller tree size and possibly the reduced damage on the remaining stand favour chipping on the strip road rather than chipping on the intermediate landing or at the mill.

Mechanized systematic thinning was the cheapest method for harvesting in the sapling stand. The required driving speed were so low that ergonomic factors should not hinder its use. Factors related to the future production of the stand do, however, limit its use. Mechanized selective thinning does not seem to be an economic method for harvesting in a sapling or pole-stage stand.

The PDF includes a summary in English.

Original keywords
metsätyö; taimikko; harvennus; koneellistaminen; kustannukset; korjuukustannukset; haketus

English keywords
thinning; mechanization; seedling stand; forest work; harvesting costs

Published in 1978

Views 2757

Available at https://doi.org/10.14214/sf.a14845 | Download PDF