Matti Kärkkäinen

Näkökohta kuitupuupölkkyjen siirtelymatkasta.

Kärkkäinen M. (1973). Näkökohta kuitupuupölkkyjen siirtelymatkasta. Silva Fennica vol. 7 no. 3 article id 4883. https://doi.org/10.14214/sf.a14720

Abstract

The aim of the paper was to analyse, using a computer simulation technique, the moving distance of pulpwood bolts when direct felling of trees is used and the bolts are gathered alongside the strip road. According to the results, the average moving distance of bolts depends in a complicated way on the usable part of the stem and the spacing of strip road. As a rule, the differences between moving distances of two-meter bolts weighted and unweighted by bolt volume of various trees is 0–16% when the strip road spacing is 30 m the reason being the fact that the heaviest butt bolts are often more far away from the strip road than the top bolts.

The PDF includes a summary in English.

Original keywords
hakkuut; kuitupuu; metsätyö; puunkorjuu; metsäkuljetus; ajourat; kaato; kasaus

English keywords
forest haulage; pulpwood; timber harvesting; fellings; forest work; off-road haulage; strip road; bunching

Published in 1973

Views 4195

Available at https://doi.org/10.14214/sf.a14720 | Download PDF