Juhani Kangas 
,
Tapio Klen
Raivaussahan kantokäsittelylaitteen käyttäjän altistuminen torjunta-aineille.
Kangas J., Klen T. (1982). Raivaussahan kantokäsittelylaitteen käyttäjän altistuminen torjunta-aineille. Silva Fennica vol. 16 no. 3 article id 5164. https://doi.org/10.14214/sf.a15079
English title: Exposure of forest workers to herbicidesAbstract
The purpose of this study was to measure workers’ exposure to MCPA and glyphosate when sprayers connected to the brush saws was used. A non-pressurized sprayer with a pump and a pressurized sprayer where dosage was regulated with manual control were studied. Exposure was measured from the breathing zone and urine samples.
MCPA collected from the breathing zone gathered into alcohol was 0.05 mg/m3 for the pressurized sprayer, 0.02 mg/m3 for the non-pressurized sprayer, and 0.04 mg/m3 (average) for both types of sprayers together.
MCPA in the breathing zone, collected from splashes and fog into a glass fibre filter, was 0.18 mg/m3 for the pressurized sprayer, 0.09 mg/m3 for the non-pressurized sprayer, and 0.12 mg/m3 for both sprayers used together. Glyphosate in the breathing zone, collected into sodium hydroxide was below 0.05 mg/m3.
In five urine samples taken after the work day there was on the average 0.4 mg/l MCPA, while in 21 samples the MCPA contents were under the definition limit (0.2 mg/l).
The PDF includes a summary in Finnish.
Original keywords
metsätyö;
työturvallisuus;
torjunta-aineet;
raivaussahat;
vesakontorjunta;
glyfosaatti;
torjunta-aineruiskutus;
altistuminen
English keywords
herbicides;
brush saw;
glyphosate;
forest work;
occupational health;
sprout control;
arboricides;
chemical brush control;
MCPA
Published in 1982
Views 2458
Available at https://doi.org/10.14214/sf.a15079 | Download PDF
