Current issue: 58(4)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Matevz Mihelic

Category : Research article

article id 7003, category Research article
Poje Anton, Raffaele Spinelli, Natascia Magagnotti, Matevz Mihelic. (2018). The effect of feedstock, knife wear and work station on the exposure to noise and vibrations in wood chipping operations. Silva Fennica vol. 52 no. 1 article id 7003. https://doi.org/10.14214/sf.7003
Keywords: biomass; fuelwood; ergonomics; safety
Highlights: Exposure to noise and vibration is higher when chipping branches rather than logs; Noise levels are higher in the separate cab, especially at some frequencies; Vibration is higher for the Z axis in the separate cab, for the X axis in the truck; Noise is higher when working with blunt knives, rather than new knives; Knife wear has no significant effect on exposure to whole-body vibration.
Abstract | Full text in HTML | Full text in PDF | Author Info

Industrial chipping is becoming increasingly popular, as the result of a growing demand for woody biomass. Industrial chippers are large, powerful machines that generate much noise and vibration. This study explored some factors that may affect exposure to noise and vibration, namely: feedstock type (branches vs. logs), work station characteristics (truck cab vs. separate cab) and knife wear (new knives vs. blunt knives). Exposure to noise was significantly affected by all three factors, and it was higher for branch feedstock, separate cabs and blunt knives. The higher exposure levels recorded for the separate cab were especially insidious, because they were below and above the hearing threshold and would elude immediate perception. Exposure to whole-body vibration (WBV) was significantly higher for branch feedstock and for the separate cab. Knife wear seemed to determine an increase in WBV, but this effect had no statistical significance and the result could not be taken as conclusive. Among the three factors studied, work station characteristics had the strongest effect. Further studies may extend the comparison to a wider range of options, as well as explore the use of exposure variation for machine diagnostics.

  • Anton, University of Ljubljana, Dept. of Forestry and Renewable Resources, Večna pot 83, 1000 Ljubljana, Slovenia E-mail: anton.poje@bf.uni-lj.si
  • Spinelli, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy; AFORA, University of the Sunshine Coast, Locked Bag 4, Maroochydore DC, Queensland, 4558 Australia ORCID http://orcid.org/0000-0001-9545-1004 E-mail: spinelli@ivalsa.cnr.it (email)
  • Magagnotti, CNR IVALSA, Via Madonna del Piano 10, I-50019 Sesto Fiorentino, Italy; AFORA, University of the Sunshine Coast, Locked Bag 4, Maroochydore DC, Queensland, 4558 Australia E-mail: magagnotti@ivalsa.cnr.it
  • Mihelic, University of Ljubljana, Dept. of Forestry and Renewable Resources, Večna pot 83, 1000 Ljubljana, Slovenia E-mail: matevz.mihelic@bf.uni-lj.si

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles