Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Articles by Hannu Salminen

Category : Article

article id 5495, category Article

Hannu Salminen, Martti Varmola. (1993). Influence of initial spacing and planting design on the development of young Scots pine (Pinus sylvestris L.) stands. Silva Fennica vol. 27 no. 1 article id 5495. https://doi.org/10.14214/sf.a15656

Keywords: Pinus sylvestris; yield; Scots pine; planting; spacing; quality

Abstract | View details | Full text in PDF | Author Info

Three Scots pine (Pinus sylvestris L.) plantations carrying 35 plots with initial spacings from 800 to 5,000 plants/ha were studied. Planting designs varied from a square to a rectangle with 5-metre row distance, the plant-to-plant distance being 0.8 metres. At current dominant height of 6 m, rectangularity had no effect on height, diameter, or volume growth of trees. Slight ovality of stems was observed in rectangular plots but the differences in the cross-wise mean diameters were very small, not over 1.1 mm in terms of plot-wise means. The diameter of the thickest living branch of a tree was linearly dependent of the dbh. The branches were clearly thicker between the planting rows at under 1,600 stems/ha stand density. A non-square planting pattern is a conceivable alternative when the line corridors suitable for mechanized silvicultural operations are preferred.
The PDF includes an abstract in Finnish.

Salminen, E-mail: hs@mm.unknown
Varmola, E-mail: mv@mm.unknown

Category : Research article

article id 10055, category Research article

Jaakko Repola, Hannu Hökkä, Hannu Salminen. (2018). Models for diameter and height growth of Scots pine, Norway spruce and pubescent birch in drained peatland sites in Finland. Silva Fennica vol. 52 no. 5 article id 10055. https://doi.org/10.14214/sf.10055

Keywords: Pinus sylvestris; Picea abies; Betula pubescens; drained peatlands; forest drainage; mixed model; tree growth model

Highlights: Tree growth strongly correlated with site drainage status; Between-tree competition had a higher impact on tree diameter growth than on height growth; Growth predicted by the constructed models were calibrated using NFI11 data to ensure generally applicable growth predictions level in whole country.

Abstract | Full text in HTML | Full text in PDF | Author Info

The aim of this study was to develop individual-tree diameter and height growth models for Scots pine, Norway spruce, and pubescent birch growing in drained peatlands in Finland. Trees growing in peatland sites have growth patterns that deviate from that of trees growing in mineral soil sites. Five-year growth was explained by tree diameter, different tree and stand level competition measures, management operations and site characteristics. The drainage status of the site was influencing growth directly or in interaction with other variables. Site quality had a direct impact but was also commonly related to current site drainage status (need for ditch maintenance). Recent thinning increased growth of all species and former PK fertilization increased growth of pine and birch. Temperature sum was a significant predictor in all models and altitude for spruce and birch. The data were a subsample of the 7th National Forest Inventory (NFI) sample plots representing northern and southern Finland and followed by repeated measurements for 15–20 yrs. Growth levels predicted by the models were calibrated using NFI11 data to remove bias originating from the sample of the modelling data. The mixed linear models technique was used in model estimation. The models will be incorporated into the MOTTI stand simulator to replace the current peatlands growth models.

Repola, Natural Resources Institute Finland (Luke), Natural resources, Eteläranta 55, FI-96300 Rovaniemi, Finland E-mail: jaakko.repola@luke.fi
Hökkä, Natural Resources Institute Finland (Luke), Natural resources, Paavo Havaksen tie 3, FI-90014 University OF Oulu, Finland E-mail: hannu.hokka@luke.fi
Salminen, Natural Resources Institute Finland (Luke), Natural resources, Eteläranta 55, FI-96300 Rovaniemi, Finland E-mail: hannu.salminen@luke.fi

article id 230, category Research article

Risto Jalkanen, Sheila Hicks, Tarmo Aalto, Hannu Salminen. (2008). Past pollen production reconstructed from needle production in Pinus sylvestris at the northern timberline: a tool for evaluating palaeoclimate reconstructions. Silva Fennica vol. 42 no. 4 article id 230. https://doi.org/10.14214/sf.230

Keywords: Scots pine; age-depth chronology; annual resolution; needle trace method; NTM; pollen accumulation rate; temperature reconstruction; tree line

Abstract | View details | Full text in PDF | Author Info

Annual needle production (PROD) of Scots pine (Pinus sylvestris L.) and pine pollen accumulation rates (PAR) are compared along a 5-site transect from the Arctic Circle to the northern timberline. PROD is calculated using the Needle Trace Method (NTM). PAR is monitored by two series of pollen traps, located in the centres of mires and within forests, respectively. There is a strong year-to-year agreement in PAR and PROD between the sites for the common 19-year period for which both proxies are available. Mean July temperature of the previous year (T_JUL–1) correlates statistically significantly with PROD at all five sites and with PAR in the four northernmost sites. There is also a significant relationship between T_JUN–1 and PROD at all sites, and T_JUN and PAR at the two northernmost sites. PROD and PAR correlate most strongly in the three near tree line sites, where PROD explains up to 51% of the variation in PAR. On the basis of the calibration between PROD, PAR and T_JUL–1, PROD and T_JUL–1 are used to reconstruct past PAR. That such a reconstruction is realistic is supported by its agreement with the pollen record for 1982–2000 and with records of male flowering for the period 1956–1973. The use of PROD in reconstructing past PAR can help in interpreting the fossil pollen signal in terms of climate rather than vegetation change and in evaluating the high-resolution dating of peat profiles and calculations of the rate of peat accumulation.

Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: risto.jalkanen@metla.fi
Hicks, Institute of Geosciences, P.O. Box 3000, FI-90014 University of Oulu, Finland E-mail: sh@nn.fi
Aalto, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: ta@nn.fi
Salminen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hs@nn.fi

article id 337, category Research article

Hannu Salminen, Risto Jalkanen. (2006). Modelling variation of needle density of Scots pine at high latitudes. Silva Fennica vol. 40 no. 2 article id 337. https://doi.org/10.14214/sf.337

Keywords: Pinus sylvestris; needles; dendroclimatology; NTM; precipitation; temperature; fascicles

Abstract | View details | Full text in PDF | Author Info

The relationship between apical extension and needle density and the effect of temperature and precipitation on needle density was modelled using data gathered from forty-nine felled sample trees in five stands of Scots pine (Pinus sylvestris L.) located along a latitudinal transect from the Arctic Circle up to the northern timberline. The lengths were measured and needle densities assessed from all annual shoots located above 1.3 metres using the Needle Trace Method (NTM), resulting, on average, in 39-year-long chronologies. The mean overall needle density was 7.8 short shoots per shoot centimetre. Needle-density variation in the measured data was mostly due to within-tree differences. Of the total variance, within-tree variation yielded 46%, between-tree 21%, and between-year 27%. The dependence of needle density on annual height growth was studied by fitting a multilevel model with random stand-, tree- and year-intercepts, the independent variables being tree age and height growth. There was a very strong negative correlation between height growth and needle density, and the proportion of between-year variance explained solely by height growth and age was 50%. The stand-wise residual variations and their correlations with the temperature and precipitation time series were further analysed with cross-correlation analysis in order to screen for additional independent variables. The only possible additional independent variable found was the precipitation of April–May (precipitation of May in the two northernmost stands). When it was added to the multi-level model, the proportion of explained between-year needle-density variance was 55%, but the overall fit of the model improved only slightly. The effect of late winter and early spring precipitation indicates the role of snow coverage and snowmelt on the growing conditions in the three southernmost stands. In general, stand-level needle-density variation is mostly due to changes in height growth.

Salminen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hannu.salminen@metla.fi
Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi

article id 362, category Research article

Hannu Salminen, Risto Jalkanen. (2005). Modelling the effect of temperature on height increment of Scots pine at high latitudes. Silva Fennica vol. 39 no. 4 article id 362. https://doi.org/10.14214/sf.362

Keywords: Pinus sylvestris; height growth; dendroclimatology; precipitation; temperature

Abstract | View details | Full text in PDF | Author Info

The effect of temperature and precipitation on the height increment of Pinus sylvestris (L.) was modelled using data gathered from a total of 49 felled sample trees from five stands of Scots pine located along a latitudinal transect from the Arctic Circle up to the northern timberline in Finland. A multilevel mixed effects model and cross-correlation analysis of prewhitened time series was used to analyse the dependence between height increment and monthly meteorological observations. The effect of the mean July temperature of the previous year on height increment proved to be very strong at high latitudes (r > 0.7). The mean November temperature of the year before the previous affected statistically significantly on height increment in the three northernmost stands. There was no correlation between height increment and precipitation in any of the sites. The final height increment model based on all stands included tree age, long-term mean temperature sum of site, and the mean July temperature of the previous year as independent variables. According to the model, one degree’s change in July temperature results on average in 1.8 cm change in the next year’s height increment. There was a modest but significant polynomial age-effect. The proportion of explained variance (at the year level) was 74%. The July temperature dependence on height increment was shown to be very strong, suggesting a high value of height increment in climate modelling at the tree line.

Salminen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: hannu.salminen@metla.fi
Jalkanen, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O. Box 16, FI-96301 Rovaniemi, Finland E-mail: rj@nn.fi

article id 436, category Research article

Martti Varmola, Hannu Salminen, Mauri Timonen. (2004). Thinning response and growth trends of seeded Scots pine stands at the arctic timberline. Silva Fennica vol. 38 no. 1 article id 436. https://doi.org/10.14214/sf.436

Keywords: Pinus sylvestris; thinning; growth and yield; northern timberline

Abstract | View details | Full text in PDF | Author Info

Growth patterns and reactions of Scots pine (Pinus sylvestris L.) to thinning in extremely harsh climatic conditions were studied in two seeded Scots pine stands located on the arctic timberline. Coniferous trees usually do not form closed stands at the timberline, but occur only in scattered tree groups. The trial was established in two stands in 1985–1986 when the trees were at an age of 47 and 56 years and an average dominant height of 6.0–6.9 m. The trial was remeasured in 1998. The thinning treatments reduced the stem number for five different levels; final density of 300, 550, 800, 1050, and 1300 stems ha–1 and unthinned. The experiment had a randomised block design with four replications in each stand. The increased growing space provided by thinning accelerated diameter growth after a delay of 2–3 years. The differences between the radial growth of the thinning treatments were very clear during the whole 13- to 14-year observation period. Annual increment of the mean diameter was regularly the higher, the larger the spacing. Dominant diameter was less influenced by treatments. There were no significant differences in dominant height between any of the treatments. Both basal area and volume were regularly the greater the higher the stem number was. Even a relatively light thinning had a distinct positive effect on tree growth, i.e. not carrying out thinning resulted in a production loss of merchantable wood. According to the results, seeded stands on the arctic timberline can grow surprisingly well in favourable conditions and reach a dominant height of 12–14 m in 100 years and a mean annual increment of 1.0–1.5 m3 ha–1 y–1 over a rotation period of 130–160 years. Based on increment figures and thinning reactions, a spacing of ca. 1000 stems ha–1 can be recommended.

Varmola, The Finnish Forest Research Institute, Rovaniemi Research Station, P.O.Box 16, FIN-96301 Rovaniemi, Finland E-mail: martti.varmola@metla.fi
Salminen, The Finnish Forest Research Institute, Rovaniemi Research Station, P.O.Box 16, FIN-96301 Rovaniemi, Finland E-mail: hs@nn.fi
Timonen, The Finnish Forest Research Institute, Rovaniemi Research Station, P.O.Box 16, FIN-96301 Rovaniemi, Finland E-mail: mt@nn.fi

article id 504, category Research article

Sylvain Jutras, Hannu Hökkä, Virpi Alenius, Hannu Salminen. (2003). Modeling mortality of individual trees in drained peatland sites in Finland. Silva Fennica vol. 37 no. 2 article id 504. https://doi.org/10.14214/sf.504

Keywords: Pinus sylvestris; Betula pubescens; simulation; peatlands; mortality; generalized linear mixed models; multilevel models

Abstract | View details | Full text in PDF | Author Info

Multilevel logistic regression models were constructed to predict the 5-year mortality of Scots pine (Pinus sylvestris L.) and pubescent birch (Betula pubescens Ehrh.) growing in drained peatland stands in northern and central Finland. Data concerning tree mortality were obtained from two successive measurements of the National Forest Inventory-based permanent sample plot data base covering pure and mixed stands of Scots pine and pubescent birch. In the modeling data, Scots pine showed an average observed mortality of 2.73% compared to 2.98% for pubescent birch. In the model construction, stepwise logistic regression and multilevel models methods were applied, the latter making it possible to address the hierarchical data, thus obtaining unbiased estimates for model parameters. For both species, mortality was explained by tree size, competitive position, stand density, species admixture, and site quality. The expected need for ditch network maintenance or re-paludification did not influence mortality. The multilevel models showed the lowest bias in the modeling data. The models were further validated against independent test data and by embedding them in a stand simulator. In 100-year simulations with different initial stand conditions, the models resulted in a 72% and 66% higher total mortality rate for the stem numbers of pine and birch, respectively, compared to previously used mortality models. The developed models are expected to improve the accuracy of stand forecasts in drained peatland sites.

Jutras, Département des sciences du bois et de la forêt, Université Laval, Ste-Foy, Québec, G1K 7P4, Canada E-mail: sj@nn.ca
Hökkä, Finnish Forest Research Institute, Rovaniemi Research Station, P.O. Box 16, FIN 96301 Rovaniemi, Finland E-mail: hannu.hokka@metla.fi
Alenius, Finnish Forest Research Institute, Rovaniemi Research Station, P.O. Box 16, FIN 96301 Rovaniemi, Finland E-mail: va@nn.fi
Salminen, Finnish Forest Research Institute, Rovaniemi Research Station, P.O. Box 16, FIN 96301 Rovaniemi, Finland E-mail: hs@nn.fi

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica