Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Articles by Pauline Stenberg

Category : Research article

article id 261, category Research article

Miina Rautiainen, Matti Mõttus, Pauline Stenberg, Sanna Ervasti. (2008). Crown envelope shape measurements and models. Silva Fennica vol. 42 no. 1 article id 261. https://doi.org/10.14214/sf.261

Keywords: Norway spruce; Scots pine; crown profile; reflectance model; remote sensing

Abstract | View details | Full text in PDF | Author Info

This paper addresses tree crown envelope shape modeling from the perspective of optical passive remote sensing. The aims are 1) to review the specific requirements of crown shape models and ground measurement techniques in optical remote sensing, and 2) to present preliminary results from empirical, parametric crown shape and volume modeling of Scots pine and Norway spruce applicable in Finland. Results indicated that the basic dimensions (maximum radius, its height and crown length) of tree crowns were better predicted for pines, but the profile shape of the upper part of the crowns varied more than in spruce. Pine crowns were also slightly less concave than spruce crowns. No regularities were observed concerning the lower part of the crowns. The asymmetry of crowns increased as a function of tree age for both species, spruce crowns being more asymmetric than pine crowns. A comparison of measured crown volume with several simple geometrical crown shape envelopes showed that using a cone as a crown shape model for Scots pine and Norway spruce underestimates crown volume most severely. Other crown envelope shape models (e.g. ellipsoids) rendered crown volumes closer to the measured volume and did not differ considerably from each other.

Rautiainen, Tartu Observatory, 61602 Tõravere, Estonia, and Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: miina.rautiainen@helsinki.fi
Mõttus, Tartu Observatory, 61602 Tõravere, Estonia E-mail: mm@nn.ee
Stenberg, Department of Forest Resource Management, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ps@nn.fi
Ervasti, City of Vantaa, Land Use and Environment / Green Area Unit, Kielotie 13, FI-01300 Vantaa, Finland E-mail: se@nn.fi

article id 275, category Research article

Lauri Korhonen, Kari T. Korhonen, Pauline Stenberg, Matti Maltamo, Miina Rautiainen. (2007). Local models for forest canopy cover with beta regression. Silva Fennica vol. 41 no. 4 article id 275. https://doi.org/10.14214/sf.275

Keywords: beta regression; canopy cover; forest canopy

Abstract | View details | Full text in PDF | Author Info

Accurate field measurement of the forest canopy cover is too laborious to be used in extensive forest inventories. A possible alternative to the separate canopy cover measurements is to utilize the correlations between the percent canopy cover and easier-to-measure forest variables, especially the basal area. A fairly new analysis technique, the beta regression, is specially designed for modelling percentages. As an extension to the generalized linear models, the beta regression takes into account the distribution of the model residuals, and uses a logistic link function to ensure logical predictions. In this study, the beta regression method was found to perform well in conifer dominated study area located in central Finland. The same model shape, with basal area, tree height and an additional predictor (Scots pine: site fertility, Norway spruce: percentage of hardwoods) as independent variables, produced good results for both pine and spruce dominated sites. The models had reasonably high pseudo R-squared values (pine: 0.91, spruce: 0.87) and low standard errors (pine: 6.3%, spruce: 5.9%) for the fitting data, and also performed well in a cross validation test. The models were also tested on separate test plots located in a different geographical area, where the prediction errors were slightly larger (pine: 8.8%, spruce: 7.4%). In pine plots, the model fit was further improved by introducing additional predictors such as stand age and density. This improved also the performance of the models in the cross validation test, but weakened the results for the external data set. Our results indicated that the beta regression method offers a noteworthy alternative to separate canopy cover measurements, especially if time is limited and the models can be applied in the same region where the modelling data were collected.

Korhonen, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: lauri.korhonen@joensuu.fi
Korhonen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: ktk@nn.fi
Stenberg, Univ. of Helsinki, Dept of Forest Resource Management, P.O. BOX 27, FI-00014 University of Helsinki, Finland E-mail: ps@nn.fi
Maltamo, University of Joensuu, Faculty of Forest Sciences, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: mm@nn.fi
Rautiainen, Univ. of Helsinki, Dept of Forest Resource Management, P.O. BOX 27, FI-00014 University of Helsinki, Finland E-mail: mr@nn.fi

article id 315, category Research article

Lauri Korhonen, Kari T. Korhonen, Miina Rautiainen, Pauline Stenberg. (2006). Estimation of forest canopy cover: a comparison of field measurement techniques. Silva Fennica vol. 40 no. 4 article id 315. https://doi.org/10.14214/sf.315

Keywords: canopy cover; forest canopy; canopy closure; Cajanus tube; line intersect sampling; spherical densiometer; digital photographs

Abstract | View details | Full text in PDF | Author Info

Estimation of forest canopy cover has recently been included in many forest inventory programmes. In this study, after discussing how canopy cover is defined, different ground-based canopy cover estimation techniques are compared to determine which would be the most feasible for a large scale forest inventory. Canopy cover was estimated in 19 Scots pine or Norway spruce dominated plots using the Cajanus tube, line intersect sampling, modified spherical densiometer, digital photographs, and ocular estimation. The comparisons were based on the differences in values acquired with selected techniques and control values acquired with the Cajanus tube. The statistical significance of the differences between the techniques was tested with the nonparametric Kruskall-Wallis analysis of variance and multiple comparisons. The results indicate that different techniques yield considerably different canopy cover estimates. In general, labour intensive techniques (the Cajanus tube, line intersect sampling) provide unbiased and more precise estimates, whereas the estimates provided by fast techniques (digital photographs, ocular estimation) have larger variances and may also be seriously biased.

Korhonen, University of Joensuu, P.O. Box 68, FI-68101 Joensuu, Finland E-mail: lauri.korhonen@joensuu.fi
Korhonen, University of Joensuu, P.O. Box 68, FI-68101 Joensuu, Finland E-mail: ktk@nn.fi
Rautiainen, University of Joensuu, P.O. Box 68, FI-68101 Joensuu, Finland E-mail: mr@nn.fi
Stenberg, University of Joensuu, P.O. Box 68, FI-68101 Joensuu, Finland E-mail: ps@nn.fi

article id 431, category Research article

Pauline Stenberg, Miina Rautiainen, Terhikki Manninen, Pekka Voipio, Heikki Smolander. (2004). Reduced simple ratio better than NDVI for estimating LAI in Finnish pine and spruce stands. Silva Fennica vol. 38 no. 1 article id 431. https://doi.org/10.14214/sf.431

Keywords: Landsat ETM ; Leaf Area Index; spectral vegetation indices; boreal coniferous forests

Abstract | View details | Full text in PDF | Author Info

Estimation of leaf area index (LAI) using spectral vegetation indices (SVIs) was studied based on data from 683 plots on two Scots pine and Norway spruce dominated sites in Finland. The SVIs studied included the normalised difference vegetation index (NDVI), the simple ratio (SR), and the reduced simple ratio (RSR), and were calculated from Landsat ETM images of the two sites. Regular grids of size 1 km2 with gridpoints placed at 50 m intervals were established at the sites and measurements of LAI using the LAI-2000 instrument were taken at the gridpoints. SVI-LAI relationships were examined at plot scale, where the plots were defined as circular areas of radius 70 m around each gridpoint. Plotwise mean LAI was computed as a weighted average of LAI readings taken around the gridpoints belonging to the plot. Mean LAI for the plots ranged from 0.36 to 3.72 (hemisurface area). All of the studied SVIs showed fair positive correlation with LAI but RSR responded more dynamically to LAI than did SR or NDVI. Especially NDVI showed poor sensitivity to changes in LAI. RSR explained 63% of the variation in LAI when all plots were included (n = 683) and the coefficient of determination rose to 75% when data was restricted to homogeneous plots (n = 381). Maps of estimated LAI using RSR showed good agreement with maps of measured LAI for the two sites.

Stenberg, Department of Forest Ecology, P.O. Box 27, FIN-00014 University of Helsinki, Finland E-mail: pauline.stenberg@helsinki.fi
Rautiainen, Department of Forest Ecology, P.O. Box 27, FIN-00014 University of Helsinki, Finland E-mail: mr@nn.fi
Manninen, Finnish Meteorological Institute, Meteorological research, Ozone and UV radiation research, P.O. Box 503, FIN-00101 Helsinki, Finland E-mail: tm@nn.fi
Voipio, Finnish Forest Research Institute, Suonenjoki Research Station, FIN-77600 Suonenjoki, Finland E-mail: pv@nn.fi
Smolander, Finnish Forest Research Institute, Suonenjoki Research Station, FIN-77600 Suonenjoki, Finland E-mail: hs@nn.fi

Category : Research note

article id 402, category Research note

Miina Rautiainen, Pauline Stenberg, Tiit Nilson. (2005). Estimating canopy cover in Scots pine stands. Silva Fennica vol. 39 no. 1 article id 402. https://doi.org/10.14214/sf.402

Keywords: Pinus sylvestris; Cajanus tube; LAI-2000 Plant Canopy Analyzer

Abstract | View details | Full text in PDF | Author Info

The way canopy cover is defined and measured influences the obtained canopy cover percentage. Estimates of canopy cover are needed, for example, in canopy radiation modelling and remote sensing applications and as a tool for political decision-making. In this paper, we demonstrated the use of two methods, the LAI-2000 Plant Canopy Analyzer instrument and the Cajanus tube, in Scots pine stands for canopy cover estimation, and also assessed the number of measurement points required for reliable estimates. The Cajanus tube yielded slightly larger canopy closure values than the LAI-2000 instrument, but the values were nevertheless in good agreement. Both of the methods required approximately 250 measurement points for canopy closure estimates of a stand to become relatively stable. We also present the first measured effective canopy transmittance values for Scots pine stands in Finland and an example of tree pattern mapping with the Cajanus tube.

Rautiainen, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: miina.rautiainen@helsinki.fi
Stenberg, Department of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: ps@nn.fi
Nilson, Tartu Observatory, EE-61602 Tõravere, Tartumaa, Estonia E-mail: tn@nn.ee

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica