Articles containing the keyword 'insect pests'

Three most promising protection methods of pine pulp wood stacks against the attacks of Tomicus piniperda L. were compared. The methods were the covering of stacks by fibreglass-strengthened paper or twofold achrylene netting, removing the upper parts of stacks, and enhanced planning of the placement of the timber store using ARC/INFO GIS-software. T. piniperda was observed to strongly prefer the upper parts of the stacks: 90 % of the beetles occurred within 0.5 meters of the top of the stacks. Covering of the stacks decreased the attack density of T. piniperda, and the protection effect of covering was 80 %. Due to long transport distances and fragmentation of forest landscape the relocation of timber store was found to be an unsuitable method in the practical level. Also, taking into account the costs of the method, removing of the upper parts of stacks was considered to be the optimal solution.

• Jääskelä, E-mail: mj@mm.unknown
• Heliövaara, E-mail: kh@mm.unknown
• Peltonen, E-mail: mp@mm.unknown
• Saarenmaa, E-mail: hs@mm.unknown

Succession of insect attacks on young Scots pine (Pinus sylvestris L.) was studied in heavily, moderately and slightly polluted pine stands within a three-kilometre distance from a prominent emission source in Western Finland. The total number of pest species was highest in the moderately polluted stand, but unlike other herbivores, aphids were also abundant in the heavily polluted stands. A few positive but no negative interactions were detected between herbivores, which suggests that insect species may benefit from a previous occurrence of other species in the same tree.

The PDF includes an abstract in Finnish.

• Heliövaara, E-mail: kh@mm.unknown
• Väisänen, E-mail: rv@mm.unknown

The presence/absence data of 27 forest insect taxa (Retinia resinella, Formica spp., Pissodes spp., several scolytids) and recorded environmental variation were used to investigate the applicability of modelling insect occurrence based on satellite imagery. The sampling was based on 1,800 sample plots (25 m by 25 m) placed along the sides of 30 equilateral triangles (side 1 km) in a fragmented forest area (approximately 100 km²) in Evo, Southern Finland. The triangles were overlaid on land use maps interpreted from satellite images (Landsat TM 30 m multispectral scanner imagery 1991) and digitized geological maps. Insect occurrence was explained using either environmental variables measured in the field or those interpreted from the land use and geological maps. The fit of logistic regression models carried between species, possibly because some species may be associated with characteristics of single trees while other species with stand characteristics. The occurrence of certain insect species at least, especially those associated with Scots pine, could be relatively accurately assessed indirectly on the basis of satellite imagery and geological maps. Models based on both remotely sensed and geological data better predicted the distribution of forest insects except in the case of Xylechinus pilosus, Dryocetes sp. and Trypodendron lineatum, where the differences were relatively small in favour of the models based on field measurements. The number of species was related to habitat compartment size and distance from the habitat edge calculated from the land use maps, but logistic regressions suggested that other environmental variables in general masked the effect of these variables in species occurrence at the present scale.

• Väisänen, E-mail: rv@mm.unknown
• Heliövaara, E-mail: kh@mm.unknown

Biogeographical patterns of the Scolytidae in Fennoscandia and Denmark, based on species incidence data from the approximately 70 km x 70 km quadrats (n = 221) used by Lekander et al. (1977), were classified to environmental variables using multivariate methods (two-way indicator species analysis, detrended correspondence analysis, canonical correspondence analysis).

The distributional patterns of scolytid species composition showed similar features to earlier presented zonations based on vegetation composition. One major difference, however, was that the region was more clearly divided in an east-west direction. Temperature variables associated with the location of the quadrat had the highest canonical coefficient values on the first axis of the CCA. Although these variables were the most important determinants of the biogeographical variation in the beetle species assemblages, annual precipitation and the distribution of Picea abies also improved the fit of the species data.

Samples with the most deviant rarity and typicality indices for the scolytid species assempblages in each quadrat were concentrated in several southern Scandinavian quadrats, in some quadrats in northern Sweden, and especially on the Swedish islands (Öland, Gotland, Gotska Sandön) in the Baltic Sea. The use of rarity indices which do not take the number of species per quadrat, also resulted high values for areas near Stockholm and Helsinki with well-known faunas. Methodological tests in which the real changes in the distribution of Ips acuminatus and I. amitinus were used as indicators showed that the currently available multivariate methods are sensitive to small faunal shifts even, and thus permit analysis of the fauna in relation to environmental changes. However, this requires more detailed monitoring of the species’ distributions over longer time spans.

Distribution of seven species (Scolytus intricatus, S. laevis, Hylurgops glabratus, Crypturgus cinereus, Pityogenes salasi, Ips typographus, and Cyleborus dispar) were predicted by logistic regression models using climatic variables. In spite of the deficiencies in the data and the environmental variables selected, the models were relatively good for several but not for all species. The potential effects of climate change on bark beetles are discussed.

The PDF includes a summary in Finnish.

• Heliövaara, E-mail: kh@mm.unknown
• Väisänen, E-mail: rv@mm.unknown
• Immonen, E-mail: ai@mm.unknown