Current issue: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Articles by Back Tomas Ersson

Category : Research article

article id 10663, category Research article

Back Tomas Ersson, Lars-Göran Sundblad, Jussi Manner. (2022). Cost analysis of seedling supply systems adapted for mechanized tree planting: a case study from southern Sweden. Silva Fennica vol. 56 no. 2 article id 10663. https://doi.org/10.14214/sf.10663

Keywords: logistics; silviculture; reforestation; tree planting machine; containerized seedling; seedling handling; system analysis

Highlights: The total cost of cardboard box concepts that increase the productivity of tree planting machines is higher than of the cultivation tray system (5–49% in the basic scenario); Increasing the boxes’ packing densities and/or the planting machines’ hourly cost increases the boxes’ cost-competitiveness; Packing density is a key factor in achieving highly cost-efficient seedling supply systems for mechanized tree planting.

Abstract | Full text in HTML | Full text in PDF | Author Info

Because today’s tree planting machines do a good job silviculturally, the Nordic forest sector is interested in finding ways to increase the planting machines’ productivity. Faster seedling reloading increases machine productivity, but that solution might require investments in specially designed seedling packaging. The objective of our study was to compare the cost-efficiency of cardboard box concepts that increase the productivity of tree planting machines with that of today’s two most common seedling packaging systems in southern Sweden. We modelled the total cost of these five different seedling packaging systems using data from numerous sources including manufacturers, nurseries, contractors, and forest companies. Under these southern Swedish conditions, the total cost of cardboard box concepts that increase the productivity of intermittently advancing tree planting machines was higher than the cost of the cultivation tray system (5–49% in the basic scenario). However, the conceptual packaging system named ManBox_fast did show promise, especially with increasing primary transport distances and increased planting machine productivities and hourly costs. Thus, our results show that high seedling packing density is of fundamental importance for cost-efficiency of cardboard box systems designed for mechanized tree planting. Our results also illustrate how different factors in the seedling supply chain affect the cost-efficiency of tree planting machines. Consequently, our results underscore that the key development factor for mechanized tree planting in the Nordic countries is the development of cost-efficient seedling handling systems between nurseries and planting machines.

Ersson, SLU, School of Forest Management, SE-739 21 Skinnskatteberg, Sweden https://orcid.org/0000-0003-2442-7482 E-mail: back.tomas.ersson@slu.se
Sundblad, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: lars-goran.sundblad@skogforsk.se
Manner, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden https://orcid.org/0000-0002-4982-3855 E-mail: jussi.manner@skogforsk.se

article id 1064, category Research article

Back Tomas Ersson, Urban Bergsten, Ola Lindroos. (2014). Reloading mechanized tree planting devices faster using a seedling tray carousel. Silva Fennica vol. 48 no. 2 article id 1064. https://doi.org/10.14214/sf.1064

Keywords: productivity; cost analysis; seedling feed; silviculture; time study; tree planting machine; containerized seedling

Highlights: Seedling reloading onto the Bracke Planter crane-mounted planting device was twice as fast with the MagMat tray-wise-loaded carousel as today’s seedling-wise-loaded carousel; Tray-wise reloading combined with deplugging seedlings from suitable cultivation trays has the potential to be an efficient and robust way to feed seedlings on any type of tree planting machine.

Abstract | Full text in HTML | Full text in PDF | Author Info

On Nordic clearcuts, today’s tree planting machines produce high-quality but costly regenerations. Much of this high cost is attributable to the planting machines’ low productivity. One promising way of raising productivity is to lessen the time spent manually reloading seedlings onto the carousels of crane-mounted planting devices. Using MagMat, a carousel test-rig designed by engineering students, we studied how much faster tray-wise seedling reloading is on the Bracke Planter compared to reloading with today’s seedling-wise-loaded carousel. The MagMat test-rig held eight Hiko cultivation trays from which seedlings were deplugged individually and dropped into the planting tube. The time study confirmed that seedling reloading was on average twice as fast with MagMat compared to today’s seedling carousel, thereby increasing assumed planting machine productivity by 8–9% depending on the planting device used. MagMat’s cost-efficiency was analysed to be particularly reliant on its added investment cost, mechanical availability and how quickly trays can be switched automatically. Nevertheless, MagMat’s field performance illustrated the overall potential of tray-wise loading compared to piecewise seedling loading for increasing the productivity of crane-mounted planting devices. Also, deplugging proved to be a reliable method of extracting seedlings from the rigid, copper-painted Hiko cultivation trays even when performed at the excavator’s boom-tip during mounding work. We conclude that, rather than piecewise seedling loading, tray-wise loading combined with deplugging seedlings from suitable cultivation trays is a reliable and much more time-efficient method to feed seedlings on probably any type of tree planting machine.

Ersson, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: back.tomas.ersson@slu.se
Bergsten, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: urban.bergsten@slu.se
Lindroos, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: ola.lindroos@slu.se

article id 958, category Research article

Back Tomas Ersson, Linus Jundén, Urban Bergsten, Martin Servin. (2013). Simulated productivity of one- and two-armed tree planting machines. Silva Fennica vol. 47 no. 2 article id 958. https://doi.org/10.14214/sf.958

Keywords: discrete-event simulation; mechanized planting; forestry; silviculture; automation; terrain model; root model

Highlights: Using discrete-event simulation and detailed terrain and machine models, the productivities of excavator-based one- and two-armed tree planting machines were simulated; The machines’ arms were equipped with one-and two-headed planting devices; Two planting heads per arm rather than two arms per base machine is better for increasing the productivity of intermittently advancing planting machines on Nordic clearcuts.

Abstract | Full text in HTML | Full text in PDF | Author Info

To increase mechanized planting, planting machine productivity must increase in order to improve cost-efficiency. To determine if excavators with two crane arms could potentially help to increase planting machine productivity under Nordic clearcut conditions, we modelled one-armed and semi-automated two-armed excavators with one- and two-headed planting devices. Using a recently developed tool for discrete-event simulation, these machine models then mounded and planted seedlings on terrain models with moraine soil having various frequencies of obstacles (stumps, roots and stones). Compared to if the two heads were mounted pairwise on only one arm, the results showed that productivity did not increase if two planting heads were attached individually to two separate crane arms. But productivity did increase if the planting machine had four planting heads mounted pairwise on two separate arms. However, despite assuming automated mounding and crane motion between planting spots, the two-armed, four-headed model never achieved high enough productivity levels to make it more cost-efficient than one-armed machines. The simulations illustrate that our terrain models generate realistic root architecture and boulder content distributions in moraine soil, while our machine models functionally describe mechanized planting work. Based on our assumptions, we conclude that further development work on two-armed excavator-based planting machines for Nordic clearcut conditions is not warranted. Our simulations reveal that increasing the number of planting heads per crane arm rather than number of crane arms per base machine offers the greatest potential to raise the productivity of intermittently advancing planting machines.

Ersson, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: back.tomas.ersson@slu.se
Jundén, UMIT Research Lab, Umeå University, SE-901 87 Umeå, Sweden E-mail: linus.junden@gmail.com
Bergsten, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: urban.bergsten@slu.se
Servin, UMIT Research Lab, Umeå University, SE-901 87 Umeå, Sweden E-mail: martin.servin@physics.umu.se

article id 108, category Research article

Back Tomas Ersson, Urban Bergsten, Ola Lindroos. (2011). The cost-efficiency of seedling packaging specifically designed for tree planting machines. Silva Fennica vol. 45 no. 3 article id 108. https://doi.org/10.14214/sf.108

Keywords: logistics; mechanized planting; containerized seedlings; seedling transport; cost analysis; seedling feed; nursery technology

Abstract | View details | Full text in PDF | Author Info

Today’s crane-mounted planting heads plant seedlings with biologically similar or better results than operational manual planting. However, the total cost of mechanized tree planting in southern Sweden must decrease at least 25% to compete economically with manual planting. Although seedlings packed in machine-specific packaging increase the productivity of planting machines by reducing seedling reloading time, they also increase logistics and investment costs. In this study, we analyzed the total cost of outplanting seedlings with an excavator-mounted Bracke Planter and seedlings packed according to four different concepts: cultivation trays, cardboard boxes, band-mounted seedlings in cardboard boxes and linked pots in container modules. The total cost per planted seedling was calculated for each packaging system as the sum of all costs from nursery to the recovery of empty packaging. The results showed that today’s system of transporting seedlings in cultivation trays is the most cost-efficient of the four alternatives. Machine-specific seedling packaging was 16–23% costlier per planted seedling than cultivation trays when trucking distances were 100 km. Sensitivity analyses indicated that machine-specific seedling packaging increased in cost-efficiency relative to cultivation trays primarily when more planting machines were contracted, but also as planting machine fixed costs and productivity increased. Moreover, the relative cost-efficiency of band-mounted seedlings, but not seedlings in container modules, increased with increasing trucking distance. Thus, we show that investments in machine-specific seedling packaging for today’s planting machines are justified only when the fixed costs, productivity and number of contracted planting machines increase substantially.

Ersson, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: back.tomas.ersson@slu.se
Bergsten, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ub@nn.se
Lindroos, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ol@nn.se

Category : Research note

article id 1136, category Research note

Håkan Lideskog, Back Tomas Ersson, Urban Bergsten, Magnus Karlberg. (2014). Determining boreal clearcut object properties and characteristics for identification purposes. Silva Fennica vol. 48 no. 3 article id 1136. https://doi.org/10.14214/sf.1136

Keywords: forestry; forest regeneration; clearcut obstacles; terrain description; terrain conditions; site properties

Highlights: We define the quantitative properties and qualitative characteristics of stumps, stones, slash, and roots, the most important objects interacting with machine activities after clearcutting; We develop a flowchart showing how a computer-aided system using clearcut object identification should be executed.

Abstract | Full text in HTML | Full text in PDF | Author Info

After clearcutting, machines traffic the clearcut conducting different silvicultural activities. Many objects on a forest clearcut (slash residues, stones, stumps and roots) may disturb e.g. site preparation and planting. This paper describes properties and characteristics of these objects. A flowchart was developed that describes a possible computer-aided system that identifies the objects, and ultimately, makes a machine avoid or target them. A system for obstacle identification creates conditions for further technical development and (semi)automation of e.g., site preparation, mechanized planting, and stump removal.

Lideskog, Division of Product and Production Development, Luleå University of Technology, SE-97187 Luleå, Sweden E-mail: hakan.lideskog@ltu.se
Ersson, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: back.tomas.ersson@slu.se
Bergsten, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: urban.bergsten@slu.se
Karlberg, Division of Product and Production Development, Luleå University of Technology, SE-97187 Luleå, Sweden E-mail: magnus.karlberg@ltu.se

Category : Discussion article

article id 23053, category Discussion article

Back Tomas Ersson, Linnea Hansson, Jussi Manner, Per Sandström, Johan Sonesson. (2023). Forest management in northern Fennoscandia: the need for solutions that mitigate conflicts during forest regeneration and increase the use of continuous cover forestry. Silva Fennica vol. 57 no. 3 article id 23053. https://doi.org/10.14214/sf.23053

Keywords: mechanical site preparation; reforestation; reindeer husbandry; indigenous rights; natural resources conflict; Sámi; Sápmi

Highlights: In Sápmi, increased use of continuous cover forestry (CCF) can reduce the frequent conflicts between forest industry and reindeer herding communities; Nordic forestry needs to develop new technical solutions for gentle and lichen-adapted mechanical site preparation during CCF in Sápmi; Such site preparation technology will promote pioneer tree species’ germination and growth, and increase the forest industry’s acceptance of CCF.

Abstract | Full text in HTML | Full text in PDF | Author Info

Today, conflicts often occur in northern Fennoscandia (also known as Sápmi) between forestry and reindeer husbandry. Continuous cover forestry (CCF) is requested by both reindeer herding communities and the general public and is becoming more common, but the forest industry criticizes CCF for lower wood production. Mechanical site preparation (MSP) increases regeneration success and, thus, increases wood production in CCF. To reduce the conflict between forestry and reindeer husbandry, MSP in Sápmi should destroy as little ground lichen as possible. Today, there are no solutions for gentle and lichen-adapted MSP in CCF. Thus, there is a strong need to develop and test new technical solutions that increase regeneration success in a lichen-adapted way during CCF in Sápmi. We suggest that MSP solutions be developed which are gentle, work selectively and function in shelterwoods, gap cuts, and selection cutting stands. We envision that these solutions could fill the gap between the desired adaptivity on the part of the reindeer herding communities and the desired efficiency on the part of the forest industry. Such MSP technology would contribute to increased acceptance of CCF in the forest industry, higher biodiversity, and considerably reduce the conflict between forestry and reindeer herding communities.

Ersson, Swedish University of Agricultural Sciences (SLU), School of Forest Management, SE-739 21 Skinnskatteberg, Sweden https://orcid.org/0000-0003-2442-7482 E-mail: back.tomas.ersson@slu.se
Hansson, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden https://orcid.org/0000-0002-9788-1734 E-mail: linnea.hansson@skogforsk.se
Manner, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden https://orcid.org/0000-0002-4982-3855 E-mail: jussi.manner@skogforsk.se
Sandström, Swedish University of Agricultural Sciences (SLU), Department of Forest Resource Management, SE-901 83 Umeå, Sweden https://orcid.org/0000-0003-0977-0071 E-mail: per.sandstrom@slu.se
Sonesson, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden https://orcid.org/0000-0002-2018-7496 E-mail: johan.sonesson@skogforsk.se

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica