Articles containing the keyword 'kuutiomäärä'

The present study gives an account of the dependence prevailing between the actual volume of timber crops, and, on one hand, the sum of cylindrical volume of individual trees, and on the other hand, the utilization per cent. This dependence is rectlinear if the volumes in question are calculated on a running-foot basis. The cylindrical volume of individual trees was calculated on the basis of cross-section area at breast height and the height of the trees. On the basis of the results, it seems that it is possible to simplify timber measurement.

The PDF includes a summary in English.

• Nisula, E-mail: pn@mm.unknown

The annual fellings and sales of pulpwood from the State Forests of Finland comprised 4.0–4.6 million m³ in 1955–1959. In order to improve the accuracy of the methods used in estimating the pulpwood stocks marked for felling, a pilot survey of 18 marked stocks was carried out in 1959. The stock area, average plot volume, variation of the plot volumes, size and shape of the plot and the distribution of the trees by diameter classes as factors affecting the precision have been studied in this paper.

The greater the mean volume of a plot the more homogenous is the structure of the marked stock. The same number of plots gives a better relative precision for the south Finnish marked stock than for the north Finnish ones, which are heterogenous and less valuable. Stocks smaller than 50 ha can often be estimated more advantageously by the strip method or visually than by the plot method. The proper size of plot in Southern Finland is 0.02–0.03 ha. In Northern Finland the plots should be larger due to the heterogenous stocks, about 0.05 ha. The shape can be either circular or rectangular. The former may be more practical and reliable in the field. The minimum number of sample trees is considered to be about 200 per 100 sample plots 0.03 ha in size.

The PDF includes a summary in English.

• Kuusela, E-mail: kk@mm.unknown

In Finland ocular estimation of the growing stock has been made by means of volume tables based on the mean height and density class, or on the dominant height and density class of the stand. The author has observed that if the volume of a stand is estimated by employment of both tables, the results vary markedly from one another. Furthermore, volume of fully stocked stands in the dominant height tables show an approximate correspondence with the volumes of managed normal stands in Southern Finland.

The purpose of this study is therefore to develop volume tables for coniferous trees, based on the density class and the mean height; these tables should give the same volume for a stand as the dominant height tables.

Volume per hectare of 187 Scots pine (Pinus sylvestris L.) stands and 120 Norway spruce (Picea abies (L.) Karst.) stands on different forest types were estimated using the relascope method in Southern Finland. With the volume and the measured mean and dominant heights as a basis, the density classes were extracted from both mean height tables and the dominant height tables. The investigation indicates that the author estimated the dense stands too thinly, and the thin ones too densely, and that the erroneous estimation of the density can be corrected by comparison of the ocular estimations and the corresponding measurements. The density can be measured by means of crown closure, stem number per hectare or the basal area per hectare.

The PDF includes a summary in English.

• Kallio, E-mail: kk@mm.unknown