Current issue: 58(5)
Articles containing the keyword 'menetelmät'
Category : Article
The structure and functional responses of roots in planted seedlings when acclimatizing at the planting site are reviewed. A wide range of methods for classifying roots has been employed, and the terminology used is not uniform. Roots can be classified by their morphology, origin, and function. The temporal and spatial variation of soil temperature, moisture, structure, and concentration of nutrients are among the most important properties to which root systems acclimatize. In order to reliably describe the function of the root system, several parameters usually have to be measured. Studies on the root-soil interface have indicated that roots are not necessarily in continuous contact with soil. The control mechanism of root growth is inadequately known and theoretically formulated. Generally, only the mass needed for water and nutrient uptake has been allocated to the roots. However, the amount of photosynthates allocated to the roots is high. Acclimatization of seedlings out at the planting site is a complicated process which is influenced by the growing conditions at both the nursery and at the site. The function, distribution and structure of roots are controlled by the environment in a way similar to the shoot, but the control mechanism is imperfectly known.
The PDF includes an abstract in English.
-
Lippu,
E-mail:
jl@mm.unknown
- Puttonen, E-mail: pp@mm.unknown
The results of an intercalibration of sulphur analysis by 24 laboratories are evaluated. The analysis was made by one or more of six methods. The following three methods were found to be satisfactory as regards relative speed and reliability: Leco S analysis, X-ray fluorescence, and vacuum ICO emission spectroscopy.
The PDF includes an abstract in English.
-
Jarva,
E-mail:
mj@mm.unknown
- Tervahauta, E-mail: at@mm.unknown
At a joint meeting of the Finnish Statistical Society and the Society of Forestry in Finland on 17.10.1984, papers were presented on the history and mathematical foundations of statistical methods used in forest inventory in Finland. The advantages and applicability of Bayresian methods and methods of spatial statistics were also discussed. In two papers, forest inventories were examined as part of a forest information system and the information demands of the user were discussed.
This article includes eight presentation held in the meeting. The papers have each a summary in English.
Berry yield of rowan tree (Sorbus aucuparia L.) was studied by picking and weighing the berries in a tree, counting the number of clusters by the eye, estimating the number of clusters by samples of 0.5 m2, and by counting the dropped berries. In the last tree methods average weight of berries in a cluster was assessed by weighing a sample of clusters. The size of the tree and the abundance of the berries influenced the choice of method. The first two methods suited for small trees, the third for a tall tree with berries in abundance, and the fourth for those cases where birds had eaten a large portion of the berries.
The berry yields of 88 rowan trees were studied in Central Finland in 1983, a year of exceptionally high berry yield. The yield of berries averaged 23 kg per tree, the number of clusters 1,249 per tree and the number of berries 42,500 per tree.
The PDF includes a summary in English.
-
Raatikainen,
E-mail:
mr@mm.unknown
- Rossi, E-mail: er@mm.unknown
- Vänninen, E-mail: iv@mm.unknown
Good correlation between radar reflection depth when using a FM-CW radar during winter and bearing capacity measurements during spring breakup was found. Therefore, it might be possible to evaluate the bearing capacity of forest roads using the radar sounding technique.
The PDF includes a summary in Finnish.
-
Saarilahti,
E-mail:
ms@mm.unknown
The use and problems of the sucrose inversion method for the study of forest humus and soil are discussed. The method is based on the temperature dependence of sucrose inversion, changes in rotation angle being determined with a circle polarimeter. Average temperatures and thermal sums for forest humus in different forests in Finland were measured, using this method, for a period of ca. 100 days. The results are not considered definitive but are regarded rather as examples. Average temperatures were somewhat higher in the humus of dry and poor heath forests than in that of moist and herb-rich forests, with exceptions that could be explicable by topographic position.
The PDF includes a summary in English.
-
Ohenoja,
E-mail:
eo@mm.unknown
- Pohjola, E-mail: lp@mm.unknown
The investigation is concerned with testing chemical totalizer of radiation (Frankfurt radiometer) for use in measuring the components of a simple energy balance (latent heat = net radiation – sensible heat) so as to gain an estimate for evaporation. The meter is based on the temperature dependence of the inversion rate of sugar solution. The relationship is exponential. It was found that radiation sums for 2–6-day periods can be reliably determined with this meter when global radiation is below 20 MJ·m-2d-1. Determining sensible heat is noticeably inaccurate, and hence the calculation of evaporation values, too. In comparing evaporation from different types of ground and plant cover one thus has to be content with drawing conclusions on the basis of net radiation values. The totalizer is therefore only suited to describing radiation conditions.
The PDF includes a summary in Finnish.
-
Mannerkoski,
E-mail:
hm@mm.unknown
The physical methods currently available for measuring the internal decay of living trees is examined in this study. Although this is mainly a review, it can be concluded that some measurements shed more light on the problem. Examination of ultrasonic methods reveals that the coupling of ultrasonic energy from the transducer to the tree is not efficient. Both impulse and ultrasonic testing work best with decayed and hollow trees. The electrical resistance measurements of stumps gave resistance values for sound wood 300–400 kΩ, for decayed and discoloured wood about 12 kΩ and for cambium about 12 kΩ. The neutron activation gives good results, and in particular it reveals nicely the increasing concentration of potassium in decayed wood. The internal decay of living trees was not examined.
The PDF includes a summary in Finnish.
-
Jartti,
E-mail:
pj@mm.unknown
The aim of the study was to find out the technical and economical applicability of seismic survey methods of sub-surface earth investigations in forest road planning. Two seismographs, SOIL-TEST MD 1 and BISON 1570, were tested in studyin 31 cuts and 3 gravel areas. The devices proved to be usable in field conditions. Sounding one spot costs about 75 Fmk and methods’ rentability is greatly based on the ration between expected and unexpected events, which depends on the areal geology. It is profitable to purchase the device especially if digging out of unexpected bedrock causes high costs.
The PDF includes a summary in English.
-
Saarilahti,
E-mail:
ms@mm.unknown
In this study two methods of determining the basic density of total tree chips are compared. The method of Mäkelä (1977) is based on the volumes of Scots pine, Norway spruce, birch, and alder in a logging area, and the age of the trees. In the other method the basic density of total tree chips is measured by the common displacement method. The correlation was 0,730 in the material of 22 logging areas. Besides this it was found that the basic density of chips increases as the size of the chip particles increases with the exception of the smallest particles.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
The paper describes a method for the measurement of basic density of total tree chips. In the method the chips are placed in a container, which is immersed in a cylinder full of water, and the container is weighted at two levels. In the upper part of the cylinder the pressure against the air bubbles is smaller than in the lower level. In this method, the effect of air bubbles in the result can be eliminated. Besides this, due to homogenization of the material to be measured only small number of samples are needed for the estimation of the average basic density.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
An electron probe X-ray microanalyser was used to study the occurrence of phosphorus, sulphur and calcium in the bud apices of dormant Scots pine (Pinus sylvestris L.). The material was collected during the winter months (November–February), fixed in Carnoy’s fluid, dehydrated, and mounted in paraffin wax. Of the 10 μm longitudinal section, the ones containing the middle portion of the apices were glued to the specimen supports and vacuum coated with aluminium. Three parallel line analysis were run over the corpus and the uppermost portion of the pith. Results obtained so far suggest that no marked changes occur in the position and level of the three elements during the study period.
The PDF includes a summary in English.
-
Kupila-Ahvenniemi,
E-mail:
sk@mm.unknown
- Hankonen, E-mail: sh@mm.unknown
- Sivonen, E-mail: ss@mm.unknown
In this literature review some error possibilities in the measurement of solid volume of logs and pulpwood are discussed. Although both underestimation and overestimation can occur for various reasons it seems likely that in the stereometric measurement method the real volume is underestimated, at least when Huber’s formula is applied, and the respective middle form factors are too low. Numerous results of empirical investigations are presented in the paper, too.
The PDF includes a summary in English.
-
Kärkkäinen,
E-mail:
mk@mm.unknown
The study describes the relationships between a method developed by the author for the calculation of the profitability of forest drainage and the old biological method. The calculations were based on empirical data, and they aimed at finding out the effect of a variation in the profitability limit in the areas in hectares to be drained, and on the profitability of drainage. The study deals also with the profitability of present-day drainage activities. The results showed that the profitability coefficient (the ratio between the discounted increase in returns and the costs of drainage) averages 3.04 for the whole country. The corresponding value was 5.68 for Southern Finland, 3.19 for Central Finland and 1.67 for Northern Finland.
The PDF includes a summary in English.
-
Heikurainen,
E-mail:
lh@mm.unknown
Among the users of factor analysis there seems to be a tendency to extend the use of this method to tasks where it suits poorly. It is therefore important to emphasise at least the following aspects: 1) More critical attention should be paid to problems of interpretation especially at situations where method is aimed at analysing the causal relationships among the variables; 2) The study problem should be stated so clearly as to make it plausible to evaluate the suitability of factor model to the problem.
The PDF includes a summary in English.
-
Järveläinen,
E-mail:
vj@mm.unknown
A hypothetic problem is outlined as an example of the type of problem to which factor analysis should not be applied. Apart from this, attention is paid to industrialisation, a concept characterised by several variables, none of which can be held constant while analysing its influence on attitudes by multi-variable cross-tabulation techniques.
The PDF includes a summary in English.
-
Riihinen,
E-mail:
pr@mm.unknown
Some alternative ways of using factor analysis in the field of forest owners’ behaviour are explored in the article, in the light of two new Finnish publications. The philosophical and mathematical propertied of factor analysis are often considered too restrictive, and thus its applicability to different fields too limited. A good knowledge of the method and the subject matter theories seems to be an important prerequisite for a successful application of factor analysis. Otherwise the researcher is too dependent on the general recommendations concerning the use of factor analysis and cannot fit its use in his special situation and the whole methodological setting of the study.
The PDF includes a summary in English.
-
Hahtola,
E-mail:
kh@mm.unknown
This project studied the value of various shoot and root-system characteristics as indicators of plantability of transplants. Correlation and regression analysis was used to compare these characteristics. The study material consisted of two-year Scots pine (Pinus sylvestris L.) transplants that had grown in a plastic greenhouse for the first year and then been transplanted in the open. The seedlings had been transplanted in the field without treatment or with the roots cut to a length of 8 cm. A part was transplanted without treatment into plastic pails. A gravimetric and photometric method was used to obtain a description of the surface area of the root systems.
The results show that the photometric value gives a good picture of the surface area of the root system. The greatest advantage offered by the method is the simplicity and rapidity of measurement. The gravimetric, and especially the titrimetric, measurement takes much more time per plant. Photometric measurement affects plantability little, and measured and planted transplants can be followed up in the field. In gravimetric measurements, it was found that fresh and dry weight of the plants were closely correlated.
Mycorrhizal frequency in the root systems gave a good picture of the surface area of the root system. The number of living roots-tips was also rather closely correlated with the surface area of the root system. The other morphological characteristics failed to serve as a satisfactory index for the surface area of root systems. The one closest correlated was the annual leader growth. The second best was stem diameter; the height of the plant, on the contrary, was rather poorly correlated with the other characteristics.
The PDF includes a summary in English.
-
Lähde,
E-mail:
el@mm.unknown
- Oksanen, E-mail: ao@mm.unknown
The article is a lectio praecursoria held on May 18, 1968 at the University of Helsinki. It deals with some aspects connected with the adaptation of mathematic-statistical methods and in particular with multivariate methods. Among these regression, factor, and principal-component analysis are mostly used by the Finnish forest economists.
The PDF includes a summary in English.
-
Mäkelä,
E-mail:
jm@mm.unknown
18 permanent sample subplots of the Swedish and the Hassian Forestry Institute, each measured in equal intervals for several decades, were divided into subplots of different size. An analysis of variance was calculated for every set of subplot size. The development of intraclass-correlations over years and over different sizes of subplots could be explained if three different correlations were assumed: soil-correlation, correlations from irregular distribution of the trees, and correlation resulting from competition. Intraclass-correlations were positive or negative depending on dominance of one or two of these correlations.
An explanatory simultation study of competitional variance showed the effect of the degree of competitional correlations on the variance of means of subplots of different sizes. If this coefficient was small, all variances of subplots means within the range investigated became larger than expected in experiments without competition, with larger coefficients the variances of means of the smaller subplots became smaller, those of larger subplots larger than expected.
Plots of medium or large size are probably optimal for long term experiments with forest trees, if all sources of costs in such experiments are taken into account.
The PDF includes a summary in English and Finnish.
-
Stern,
E-mail:
ks@mm.unknown
The present study gives an account of the dependence prevailing between the actual volume of timber crops, and, on one hand, the sum of cylindrical volume of individual trees, and on the other hand, the utilization per cent. This dependence is rectlinear if the volumes in question are calculated on a running-foot basis. The cylindrical volume of individual trees was calculated on the basis of cross-section area at breast height and the height of the trees. On the basis of the results, it seems that it is possible to simplify timber measurement.
The PDF includes a summary in English.
-
Nisula,
E-mail:
pn@mm.unknown
The present study is an attempt to clarify the decrease in growth, or the increment loss, caused by sudden reduction of growth of the growing stock below a certain level, and to find a method for its determination. Increment loss is defined as a decrease in growth during the rotation due to a deficient stock volume. The material consists of Koivisto’s yield tables for repeatedly thinned stands in Southern Finland, and the results of the Third National Forest Inventory concerning the mean volume and increment in the productive sites.
For the calculation of increment loss three formulae were constructed where the increment loss is calculated 1) as the difference between the removal by thinnings in normally developed stands during a time equal with the period of deficient stock and the suddenly removed stock, 2) according to the compound interest calculation principle as the sum of the differences which are obtained by subtracting from the removal in each thinning during the period of deficient stock its initial value, and 3) as the straight interest of the stock deficiency during the period of deficient stock.
According to the calculations, the increment loss is greatest in stands to be grown, viz. 50 m3 solid measure excluding bark per hectare tended Norway spruce stands on Oxalis-Myrtillus type sites at 40% deficiency below minimum stock. In stands to be regenerated the losses are, too, greatest in the similar stands. It exceeds 200 m3/ha when stands younger than 50 years have to been regenerated and the removal amounts to 50% of the stock. In stands to be regenerated the increment loss for spruce, due to the slow initial development by the species, is greater than for Scots pine and birch. The loss is the same at different period of age if the relative deficiency of the stock is of equal size.
According to the study, each stand has a characteristic variation in the increment loss which depends mainly on the relative degree of deficiency from the minimum stock. The formulae and methods can be used to determine the increment loss in average and better stands in Southern Finland when the stock suddenly decreases.
The PDF includes a summary in English.
-
Matilainen,
E-mail:
tm@mm.unknown
One forest drainage undertaking in Finland often consists of woodlots belonging to several owners, and over hundred owners may be involved. In the present paper a method for allocation the costs to different owners in a joint drainage undertaking is worked out. The problem has been emphasised by the new Waterways Law, which enables also such drainage projects to be undertaken to which some of the land owners oppose. In those cased the costs must be allocated according to the benefit driven by each owner from the project.
The method attempts to assess the benefits to be driven from the forest drainage, those costs of the drainage that are joint and thus subjected to allocation, and what is the area affected by drainage as used as a basis for cost allocation.
The joined costs are apportioned in the following manner. The area of peatland adjusted to differences in the benefit obtained by drainage is ascertained by the land holder by multiplying the index number by the corresponding areas. In the case of cultivated agricultural land, also an index showing the need for drainage is used in computing the adjusted area. Each topographic unit in the map is provided with a notation of its apportionment area. Joined costs are allocated to different land owners in relation to their adjusted land areas.
The PDF includes a summary in English.
-
Heikurainen,
E-mail:
lh@mm.unknown
- Keltikangas, E-mail: mk@mm.unknown
- Seppälä, E-mail: ks@mm.unknown
The aim of this study was to find out to what extent it is possible to time phases of work by making instant observations at regular intervals according to the principles of the method of random samples, and arrive at similar results as obtained by timing continuously with a decimal-minute stop watch. In the first mentioned method the observer of the time study is given a sound signal at even intervals, in this case each 1/10-minute period, during the signal he records the phase of work (element) the object is performing.
The material of the study consists of studies in skidding and loading in connection with transportation by tractor during a period of 8 days. The duration of each element in using tractor hand in skidding and hauling was measured with an ordinary stop watch using repetitive timing. This material was then converted into random sample material.
The analysis of the material showed that the method of random samples yielded observations from all phases of work present in the material obtained by measuring with the stop watch. The duration of elements as determined by the random-sample method were of the same order as determined with stop watch. The results did not cause any observable systematic deviation or rhythmic repetition of elements.
The PDF includes a summary in English.
-
Nisula,
E-mail:
pn@mm.unknown
In connection to the Third National Forest Inventory of Finland, two survey strips in the northernmost Finland were photographed on scale 1:15,000. Infrared films and a yellow filter were used. For the present experiment a total length of 66 km of the strips was photographed. The strips were surveyed visually from the ground by stands. Sample plots were measured at kilometre intervals. The aerial photographs were surveyed the distances covered in the ground. The work was aided by stereograms which showed 16 large-size sample plots localised on aerial photographs.
The main groups of land identified along the survey line were productive and poorly productive forest land, wasteland and another land, in addition, peatland and firm land were distinguished. Although some differences were noted, the two survey methods provided fairly similar results. For an estimation of the tree species composition the material is one-sided since the district is mainly Scots pine. The principal tree species was successfully distinguished on aerial photographs in 78 out of 82 comparable pairs.
The mean of ground observations of dominant height of the stands was 10.9 m, that of observations on aerial photographs 11.2 m. The result of stand volume estimates reveals a distinct correlation between the various methods of estimation.
In an earlier study it was shown that it is possible, using a stand volume table based on characteristics revealed in aerial photography, to create a general idea of stand volume on the southern half of the country. A few additional factors, of interest for the stratification necessary in forest inventories, were also studied. A distinct correlation was observed between the results of aerial and ground survey for all the characteristics discussed. The present experiment showed that the prerequisites for stratification through aerial photographs do exist. Further investigation is needed into the most appropriate methods for stratification in each situation.
The PDF includes a summary in English.
-
Nyyssönen,
E-mail:
an@mm.unknown
- Poso, E-mail: sp@mm.unknown
-
Kuusela,
E-mail:
kk@mm.unknown
- Setälä, E-mail: ks@mm.unknown
Broadcast sowing on snow was relatively new method in the beginning of the 20th century in Finland, and the experiences of regeneration were diverse. The aim of the survey was to study the success rate of regeneration in the oldest and largest areas regenerated with this sowing method in Tuomarniemi district. Scots pine (Pinus sylvestris L.) was the most common tree species, but also Norway spruce (Picea abies (L.) H. Karst.) and European larch (Larix decidua Mill.) were used in broadcast sowing on snow.
According to the study, the success of broadcast sowing on snow was as good as patch sowing and sowing in furrows in the sites typical for Tuomarniemi. The regeneration areas were often drained peatlands or paludified lands. When sowing is done using Norway spruce seeds, site preparation either by broadcast burning or scalping with hoe is recommended. Mixed sowing with pine and spruce seldom succeeded due to the differences in site requirements of the species and growth of seedlings. Sowing of Scots pine succeeded well on the drained peatlands. Sowing should be done some years after draining to let the peat dry and sink. Site preparation is needed in sites growing Polytrichum-moss. Broadcast burned areas larger than 10 hectares seemed to regenerate poorer than sites in average, possibly due to dryness of the sites. Trials with European larch were successful, and the growth of the seedlings acceptable despite the sites being relatively poor for the species.
The PDF includes a summary in German.
-
Borg,
E-mail:
lb@mm.unknown
There is demand for cultivated willow in toy and barrel making, and handcrafts in Finland. In Europe, Salix sp. have been cultivated on several kinds of sites. In Finland, suitable sites for willow plantations could be found, for instance, by the rivers and brooks, on other alluvial lands, wet meadows and other humid lands unsuitable for agriculture. The article suggests that the cultivation of willow should begin on the agricultural lands, because the choice of origin of the willow cuttings is less important when it is grown on fields, and the areas are more accessible. The desired qualities for cultivated willow are good growth rate and robust stems, frost resistance and resistance to annual cuttings. Of the different species, especially suitable is Salix sect. Amygdalinae. In field tests, all the tested Salix species have been frost resistant, which makes it possible to cut the stems annually.
The PDF includes a summary in German.
-
Nordberg,
E-mail:
sn@mm.unknown
Category : Article
The purpose of this paper is 1) to establish the possible seasonal variation of the different phases of work in the sawmill industry in Finland, 2) to study the internal and external factors influencing the seasonal character of the sawmill industry, 3) to study ha time lags between the work phases of the sawmill industry, 4) to analyse the seasonal nature of the industry’s money transactions, and 5) to give information concerning the factors influencing employment. The investigation is based on questionnaires of a random sample of sawmills concerning the time period of 1958-1960. This paper concentrates on the methods of the study, the results are reported in a separate paper in the Acta Forestalia Fennica issue 75 vol 1.
It was concluded that if seasonal variation in the sawmill industry is to be analysed on the scale it has been in the present work, sampling is the cheapest and most practicable method of collecting the material. If seasonal fluctuation of the industry is to be calculated by size classes, the sample must be allocated into strata by measuring the heterogeneity of the classes with a parameter illustrating seasonal variation. It might be useful to apply these parameters already when the total size of the sample is determined. For the smallest sawmills, for which practically all data have to be collected from primary documents, the most practical method is perhaps to send collectors to the spots. To the larger sawmills the questionnaire can perhaps be sent by mail. A moving index should be obtained for calculation of a seasonal index, but this demands long time series. The collection of the data is described in detail.
The PDF includes a summary in English.
-
Ervasti,
E-mail:
se@mm.unknown
Because the ‘rental cut method’ is rather arduous and based partly on subjective analysis, new forms for a cutting budget has been developed. One of them is a method called stock development forecast, and another method will be described in this paper. The main characteristics of the present growing stock affecting the allowable cut are the forest area, site quality, forest composition by age and development classes, volume, and increment.
In the method described in this paper an analysis of the desirable stock is necessary. The allowable cut is a function of the current and desirable stock and the increment during the budget period. The budget is based on information about the forest area, site quality, growing stock and its structure, collected from an inventory. The desirable stock is described in the same sub-groups as is the current stock. An increment forecast is prepared by compound and an interest formulae and increment percentages are presented as a function of the stock age. The allowable cut shows the average amount of the cut during the management plan period.
The PDF includes a summary in English.
-
Kuusela,
E-mail:
kk@mm.unknown
- Nyyssönen, E-mail: an@mm.unknown
Decomposition of the peat using von Post Humification Scale (1–10), developed by Lennart von Post, can be determined based on characteristics of peat, such as fibre integrity, colour and viscosity of exudate, and presence of colloidal particles, of handful of peat squeezed in the hand. It is easy to use and has proved useful in the practical work. The method developed by Pjavthenko is mostly based on specific weight off a dried sample in percentage, and requires analysis in the laboratory. The aim of this study was to compare the results of these two methods by measuring 156 peat samples representing different stages of decomposition.
The methods are based on different principles, which is reflected in small differences of the results. The maximum scores of the methods are clearly in different level. The maximum grade of 9–10 in von Post scale correspond decomposition percentage 51 in the scale of Pjavtsheko. However, the decomposition values in von Post scale are placed evenly on the scale of Pjavtshenko. This suggests that the von Post Scale is consistent and accurately developed. According to the study, the Pjavtshenko method is a good method to validate results of von Post Humification Scale, and can be used when decomposition of peat samples is determined in laboratory.
The PDF includes a summary in German.
-
Sarasto,
E-mail:
js@mm.unknown
In Finland the general shortage of labour during the Second World War called attention to employment problems in forestry. After the war the scope widened to include sociological and human maters. The Finnish Rural Labour Force Study deals with the whole rural labour force, not only forest work. Due to the scale of the subject, pilot studies were started by the Institute of Forest Economics at the University of Helsinki and the Central Statistical Office and the Board of Agriculture in 1950. This article describes in detail the methods used in the pilot studies the and main survey.
The aim of the survey was to obtain a reliable picture of three subjects. 1) The labour input of the male rural population during the observation year, its distribution and the seasonal fluctuations in the structure of labour input. 2) The unemployment time of the rural population, the periods underemployment and its seasonal variation. 3) The number of male workers engaged for a shorter or longer period during the year in certain occupation. The paper discusses the different data sources and ways to collect the data either from enterprises or workers. One of the obstacles is the large number of enterprises in agriculture and forestry. Consequently, the total number of people employed in a particular industry, its distribution and the duration of the working season can be estimated only from a sample selected from the population.
The data of the survey is based on a systematic sample, collected by interviews, of the annual round of activity in 1950 of 44,667 men of 15-64 years of age living in Finnish rural communes. The interviews were made in connection with the 1950 census of Finland. The results of the survey are presented in the other articles of Acta Forestalia Fennica issue 63.
The PDF includes a comprehensive summary in English.
-
Heikinheimo,
E-mail:
lh@mm.unknown
The article introduces methods that can be used to calculate economic profitability of draining of peatlands, and discusses their advantages and weaknesses. The time span from draining of a peatland and the future income is usually decades, which makes it difficult to assess profitability for the investment. For instance, income from future fellings depends on chosen rotation time, and price of timber that can fluctuate strongly.
When calculating the profitability, the drained area can be treated as a separate unit of account or as a part of the forest holding. In the first case, several methods can be used. First, yield in terms of value is a suitable method only if the peatland has no existing forest. Second, annual yield of a drained peatland and peatland in natural state can be compared. In this case yield can be defined in several ways. Third method uses value increment of the growing stock. Fourth method estimates value of increment for both the growing stock and land. Fifth method is based on present value of the future felling income, and sixth on actual value of the growing stock and yield in terms of value.
The PDF includes a summary in German.
-
Saari,
E-mail:
es@mm.unknown
Only 0.1% of the land area of Perä-Pohjola and Lapland is arable land. The study includes a detailed survey of 154 farms in the area. Part of the results are presented in the second part of the article series about Perä-Pohjola and Lapland (Acta Forestalia Fennica vol. 18). The farms had in average 1.87 hectares of arable land and 16.1 hectares of meadows. Cattle-manure was the most important dressing. The main crops were barley, hay, potatoes and rye. The article includes a detailed description about the cultivation methods.
The PDF includes a summary in English. This is a third part of four-article series on the natural resources in the area of Perä-Pohjola and Lappi. The article includes a detailed survey of the farms in the area.
-
Jutila,
E-mail:
kj@mm.unknown
The possibilities of using microwave techniques in detecting the trafficability of peatlands is discussed. Three microwave methods were tested. 1) A FM-CW radar using 1.0–1.8 GHz frequency was used to measure the frost thickness of peat layer. It was possible to follow the variations in snow and frost layer thickness. Total reflected power might indicate the wetness class of the peatland, which is also a trafficability factor. 2) A short-pulse radar with 100 MHz frequency was tested in summer condition. Good profiling of peat layers was obtained, giving basic information for trafficability analysis. 3) A mapping of brightness of temperature of peatlands in summer conditions using a 790 MHz radiometer. The measured brightness temperature was correlated with vegetation cover, thus giving some information of trafficability.
The PDF includes a summary in English.
-
Saarilahti,
E-mail:
ms@mm.unknown
The purpose of this study was that of providing a long-term timber production model (Kilkki and Pökkälä 1975) with growing stock models. The paper is divided into two parts; the first is concerned with generation of the stand data through Monte-Carlo simulation. The growing stock of each stand was described by a DBH-height distribution. The necessary information on the relationships between the stand characteristics was derived from sample plots measured in the national forest inventory of Finland. A total of 1,500 Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) H. Karst), and birch (Betula sp.) stands, each comprising 100 trees were provided by simulation.
In the second part, models predicting the form factor, timber assortment distribution, and value of the growing stock were derived through regression analysis for each species of tree. The predicting variables included the form factor of the basal area median tree, basal area median diameter, and height in the form factor models. In the timber assortment and value models, the only predicting variable was the volume of the basal area median tree. The Matchcurve-technique (Jensen 1973) was employed in derivation of the regression models.
The PDF includes a summary in English.
-
Kilkki,
E-mail:
pk@mm.unknown
- Siitonen, E-mail: ms@mm.unknown
This study is concerned with silvicultural selection from above. The material consists of 18 Scots pine (Pinus sylvestris L.) sample plots in the southern half of Finland in experimental forests. The method is motivated by the great difference between the stumpage prices of saw timber and pulpwood. The method suggested includes the removal of individuals belonging to the predominating canopy, to achieve high levels of income from the stand at an early stage. The method is applied at when the growing stock is attaining saw-timber size. Before that the stand is treated with thinnings from below. It is supposed that the volume of growing stock is maintained at a level as high as that in below-thinned stands, and that rotation is of normal length.
On the average, the increment in basal area, as well as volume increment, is greater in stands selectively cut from above than in those treated with low thinnings of the same degree. Initially, selection from above seems to exert a negative effect upon the development of dominant height; later, the dominant height reassumes the same rate of increment as in the below-thinned stands. Selection from above also means an increase in saw-timber production, although it involves a reduction in the mean size of saw timber. The investigation includes growth and yield tables for pine stands treated with silvicultural selection from above.
The results of the investigation prove that silvicultural selection from above is at least as profitable as low thinning. This provides freedom for stand treatment, and contributes to the application of a method most suitable for the owner in each individual case. It is further stressed that the maintenance of a high wood capital in the stand is far more important than the method of thinning applied.
The PDF includes a summary in English.
-
Vuokila,
E-mail:
yv@mm.unknown
This is a fourth paper in a series of studies concerning logging in farm forests. The objective was to construct a model representing the productivity per farm of logging for delivery cuts. The first objective was to find out how the productivity of logging should be measured. In the study, combined labour and capital are regarded as the input.
Second object was to consider what variables to use in theory to determine the productivity of logging for delivery cuts. The factors affecting productivity depend on the concept of productivity employed. The productivity per farm of logging in delivery cuts can be determined both by regional and by farm variables. Still considering solely the effect of the quality of labour and capital input, the variables representing the person in charge of the delivery cuts are important explanatory farm variables. Others represent the farm totality (size, lines of production etc.).
Third aim was to develop a statistical-mathematical method suitable for constructing the model. Possible methods include regression analysis, which is, however, not the best method when there is large number of different levels to explain, or factor analysis. The suitable method to use in constructing a model depicting the productivity of a farm, was considered to be to condense the explanatory variables into rotated orthogonal factors. After preliminary correlation analysis, estimates of the factors interpreted as rational were employed as the explanatory variables for selective regression analysis.
Last, the model was tried out against actual material collected per farm, and the hypotheses were tested.
The PDF includes a summary in English.
-
Mäkelä,
E-mail:
jm@mm.unknown
