Current issue: 58(4)

Under compilation: 58(5)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17^th
PlanS compliant

Articles by Jari Hynynen

Category : Article

article id 5559, category Article

Jari Hynynen. (1995). Predicting the growth response to thinning for Scots pine stands using individual-tree growth models. Silva Fennica vol. 29 no. 3 article id 5559. https://doi.org/10.14214/sf.a9210

Keywords: Pinus sylvestris; thinnings; height; diameter; stem form; growth models; individual-tree; distance-dependent

Abstract | View details | Full text in PDF | Author Info

Individual tree-growth models for diameter and height, and a model for the cylindrical stem form factor are presented. The aims of the study were to examine modelling methods in predicting growth response to thinning, and to develop individual-tree, distance-independent growth models for predicting the development of thinned and unthinned stands of Scots pine (Pinus sylvestris L.). The models were constructed to be applicable in simulation systems used in practical forest management planning. The models were based on data obtained from eleven permanent thinning experiments located in even-aged Scots pine stands in Southern and Central Finland.

Two alternative models were developed to predict tree diameter growth in thinned and unthinned stands. In the first model, the effect of stand density was described using stand basal area. In the alternative model, an explicit variable was incorporated referring to the relative growth response due to thinning. The magnitude of the growth response was expressed as a function of thinning intensity. The Weibull function was employed to describe the temporal distribution of the thinning response. Both models resulted in unbiased predictions in unthinned and in moderately thinned stands. An explicit thinning variable was needed for unbiased growth prediction in heavily thinned stands, and in order to correctly predict the dynamics of the growth response.

In the height growth model, no explicit thinnning variable referring thinning was necessary for growth prediction in thinned stands. The stem form factor was predicted using the model that included tree diameter and tree height as regressor variables. According to the results obtained, the information on the changes in the diameter/height ratio following the thinning is sufficient to predict the change in stem form.

Hynynen, E-mail: jh@mm.unknown

Category : Research article

article id 10612, category Research article

Daesung Lee, Jouni Siipilehto, Jari Hynynen. (2021). Models for diameter distribution and tree height in hybrid aspen plantations in southern Finland. Silva Fennica vol. 55 no. 5 article id 10612. https://doi.org/10.14214/sf.10612

Keywords: Näslund’s height curve; Weibull distribution; parameter recovery; Populus tremula × P. tremuloides; clonal plantation; nonlinear mixed-effects model

Highlights: Parameter recovery method for the Weibull function fitted diameter distributions well by means of sum and mean forest stand characteristics for hybrid aspen plantations; Arithmetic and weighted mean diameters performed better for the recovery method than the corresponding median diameters; Two alternative Näslund’s height curve models with stand characteristics and tree dbh predictors provided unbiased tree height predictions.

Abstract | Full text in HTML | Full text in PDF | Author Info

Hybrid aspen (Populus tremula L. × P. tremuloides Michx.) is known with outstanding growth rate and some favourable wood characteristics, but models for stand management have not yet been prepared in northern Europe. This study introduces methods and models to predict tree dimensions, diameter at breast height (dbh) and tree height for a hybrid aspen plantation using data from repeatedly measured permanent sample plots established in clonal plantations in southern Finland. Dbh distributions using parameter recovery method for the Weibull function was used with Näslund’s height curve to model tree heights. According to the goodness-of-fit statistics of Kolmogorov-Smirnov and the Error Index, the arithmetic mean diameter (D) and basal area-weighted mean diameter (DG) provided more stable parameter recovery for the Weibull distribution than the median diameter (DM) and basal area-weighted median diameter (DGM), while DG showed the best overall fit. Thus, Näslund’s height curve was modelled using DG with Lorey’s height (HG), age, basal area (BA), and tree dbh (Model 1). Also, Model 2 was tested using all predictors of Model 1 with the number of trees per ha (TPH). All predictors were shown to be significant in both Models, showing slightly different behaviour. Model 1 was sensitive to the mean characteristics, DG and HG, while Model 2 was sensitive to stand density, including both BA and TPH as predictors. Model 1 was considered more reasonable to apply based on our results. Consequently, the parameter recovery method using DG and Näslund’s models were applicable for predicting tree diameter and height.

Lee, Natural Resources Institute Finland (Luke), Natural resources, Latokartanonkaari 9, FI-00790 Helsinki, Finland https://orcid.org/0000-0003-1586-9385 E-mail: daesung.lee@luke.fi
Siipilehto, Natural Resources Institute Finland (Luke), Natural resources, Latokartanonkaari 9, FI-00790 Helsinki, Finland E-mail: jouni.siipilehto@luke.fi
Hynynen, Natural Resources Institute Finland (Luke), Natural resources, Vipusenkuja 5, FI-57200 Savonlinna, Finland https://orcid.org/0000-0002-9132-8612 E-mail: jari.hynynen@luke.fi

article id 10414, category Research article

Jouni Siipilehto, Micky Allen, Urban Nilsson, Andreas Brunner, Saija Huuskonen, Soili Haikarainen, Narayanan Subramanian, Clara Antón-Fernández, Emma Holmström, Kjell Andreassen, Jari Hynynen. (2020). Stand-level mortality models for Nordic boreal forests. Silva Fennica vol. 54 no. 5 article id 10414. https://doi.org/10.14214/sf.10414

Keywords: Norway spruce; Scots pine; simulation; broadleaved species; logistic function; period length; plot size

Highlights: Models were developed for predicting stand-level mortality from a large representative NFI data set; The logistic function was used for modelling the probability of no mortality and the proportion of basal area in surviving trees; The models take into account the variation in prediction period length and in plot size; The models showed good fit with respect to stand density, developmental stage and species structure, and showed satisfying fit in the independent data set of unmanaged spruce stands.

Abstract | Full text in HTML | Full text in PDF | Author Info

New mortality models were developed for the purpose of improving long-term growth and yield simulations in Finland, Norway, and Sweden and were based on permanent national forest inventory plots from Sweden and Norway. Mortality was modelled in two steps. The first model predicts the probability of survival, while the second model predicts the proportion of basal area in surviving trees for plots where mortality has occurred. In both models, the logistic function was used. The models incorporate the variation in prediction period length and in plot size. Validation of both models indicated unbiased mortality rates with respect to various stand characteristics such as stand density, average tree diameter, stand age, and the proportion of different tree species, Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.), and broadleaves. When testing against an independent dataset of unmanaged spruce-dominated stands in Finland, the models provided unbiased prediction with respect to stand age.

Siipilehto, Natural Resources Institute Finland (Luke), Natural resources, P.O. Box 2, FI-00790 Helsinki, Finland E-mail: jouni.siipilehto@luke.fi
Allen, Norwegian Institute of Bioeconomy Research (NIBIO), Division of Forest and Forest Products, NO-1431 Ås, Norway; Larson and McGowin Inc., Mobile, AL 36607, USA https://orcid.org/0000-0002-7824-2849 E-mail: micky.allen@nibio.no
Nilsson, Swedish University of Agricultural Sciences (SLU), Southern Swedish Forest Research Centre, SE-23053 Alnarp, Sweden https://orcid.org/0000-0002-7624-4031 E-mail: urban.nilsson@slu.se
Brunner, Norwegian University of Life Sciences (NMBU), Faculty of Environmental Sciences and Natural Resource Management, NO-1432 Ås, Norway https://orcid.org/0000-0003-1668-9714 E-mail: andreas.brunner@nmbu.no
Huuskonen, Natural Resources Institute Finland (Luke), Natural resources, P.O. Box 2, FI-00790 Helsinki, Finland https://orcid.org/0000-0001-8630-3982 E-mail: saija.huuskonen@luke.fi
Haikarainen, Natural Resources Institute Finland (Luke), Natural resources, P.O. Box 2, FI-00790 Helsinki, Finland https://orcid.org/0000-0001-8703-3689 E-mail: soili.haikarainen@luke.fi
Subramanian, Swedish University of Agricultural Sciences (SLU), Southern Swedish Forest Research Centre, SE-23053 Alnarp, Sweden https://orcid.org/0000-0003-2777-3241 E-mail: narayanan.subramanian@slu.se
Antón-Fernández, Norwegian Institute of Bioeconomy Research (NIBIO), Division of Forest and Forest Products, NO-1431 Ås, Norway https://orcid.org/0000-0001-5545-3320 E-mail: clara.anton.fernandez@nibio.no
Holmström, Swedish University of Agricultural Sciences (SLU), Southern Swedish Forest Research Centre, SE-23053 Alnarp, Sweden https://orcid.org/0000-0003-2025-1942 E-mail: emma.holmstrom@slu.se
Andreassen, Norwegian Institute of Bioeconomy Research (NIBIO), Division of Forest and Forest Products, NO-1431 Ås, Norway https://orcid.org/0000-0003-4272-3744 E-mail: kjellandreassen@gmail.com
Hynynen, Natural Resources Institute Finland (Luke), Natural resources, P.O. Box 2, FI-00790 Helsinki, Finland E-mail: jari.hynynen@luke.fi

article id 220, category Research article

Jani Heikkilä, Matti Sirén, Anssi Ahtikoski, Jari Hynynen, Tiina Sauvula, Mika Lehtonen. (2009). Energy wood thinning as a part of stand management of Scots pine and Norway spruce. Silva Fennica vol. 43 no. 1 article id 220. https://doi.org/10.14214/sf.220

Keywords: energy wood thinning; stand management; MOTTI simulator

Abstract | View details | Full text in PDF | Author Info

The effects of combined production of industrial and energy wood on yield and harvesting incomes, as well as the feasibility of energy wood procurement, were studied. Data for 22 Scots pine (Pinus sylvestris L.) and 21 Norway spruce (Picea abies (L.) Karst.) juvenile stands in Central and Southern Finland were used to compare six combined production regimes to conventional industrial wood production. The study was based on simulations made by the MOTTI stand simulator, which produces growth predictions for alternative management regimes under various site and climatic conditions. The combined production regimes included precommercial thinning at 4–8 m dominant height to a density of 3000–4000 stems ha^–1 and energy wood harvesting at 8, 10 or 12 m dominant height. Combined production did not decrease the total yield of industrial wood during the rotation period. Differences in the mean annual increment (MAI) were small, and the rotation periods varied only slightly between the alternatives. Combined production regime can be feasible for a forest owner if the price of energy wood is 3–5 EUR m^–3 in pine stands, and 8–9 EUR m^–3 in spruce stands. Energy wood procurement was not economically viable at the current energy price (12 EUR MWh^–1) without state subsidies. Without subsidies a 15 EUR MWh^–1 energy price would be needed. Our results imply that the combined production of industrial and energy wood could be a feasible stand management alternative.

Heikkilä, L&T Biowatti Oy, P.O. Box 738, FI-60101 Seinäjoki, Finland E-mail: jani.heikkila@biowatti.fi
Sirén, Finnish Forest Research Institute, Vantaa Research Unit, P.O.Box 18, FI-01301 Vantaa, Finland E-mail: ms@nn.fi
Ahtikoski, Finnish Forest Research Institute, Rovaniemi Research Unit, P.O.Box 16, FI-96301 Rovaniemi, Finland E-mail: aa@nn.fi
Hynynen, Finnish Forest Research Institute, Vantaa Research Unit, P.O.Box 18, FI-01301 Vantaa, Finland E-mail: jh@nn.fi
Sauvula, Seinäjoki University of Applied Sciences, School of Agriculture and Forestry, Tuomarniementie 55, FI-63700 Ähtäri, Finland E-mail: ts@nn.fi
Lehtonen, Finnish Forest Research Institute, Vantaa Research Unit, P.O.Box 18, FI-01301 Vantaa, Finland E-mail: ml@nn.fi

article id 245, category Research article

Saija Huuskonen, Jari Hynynen, Risto Ojansuu. (2008). Stand characteristics and external quality of young Scots pine stands in Finland. Silva Fennica vol. 42 no. 3 article id 245. https://doi.org/10.14214/sf.245

Keywords: Scots pine; growth and yield; precommercial thinning; external stem quality; young stand management

Abstract | View details | Full text in PDF | Author Info

The effects of silvicultural practices (regeneration method and young stand management) on the stand characteristics of young Scots pine (Pinus sylvestris (L.)) stands were studied. Stand density, mean diameter, crown ratio and external quality of young Scots pine stands were analysed on the basis of extensive inventory data. The study material consisted of 181 stands containing inventory growth plots, representing the most common site types for Scots pine and covering all the important wood production areas in Finland. Intensive management practices, i.e. artificial regeneration and precommercial thinning, clearly enhanced mean diameter development of the stand. The overall stand density of the crop trees was relatively low in the material (1925 trees ha–1). In more than one third of the stands, the stem number of crop trees was below 1500 trees ha–1. Stand density was not affected by forest management, but it was slightly higher in Southern than in Northern Finland. The geographical location, in terms of annual effective temperature sum, affected the average slenderness and crown ratio. At a given mean stand diameter, the dominant height of the stand was lower, and the mean crown ratio was higher, in Northern than in Southern Finland. The average external quality of the Scots pine trees was relatively low. The proportion of trees without any observed defects was 54%. The most common external defects were curved stems (23%) and branchiness (9%). Branchiness was more frequent among the largest trees, while curved stems were more common in smaller trees. Defects were the most frequent in planted stands, and in stands growing on fresh sites. The defects were more frequent in Northern Finland than in Southern Finland. The relatively low stand density and poor external quality of the young stands emphasize the importance of stem quality as a tree selection criterion in commercial thinnings of Scots pine stands, if the goal is to produce high quality timber.

Huuskonen, University of Helsinki, Department of Forest Ecology, Helsinki, Finland E-mail: saija.huuskonen@helsinki.fi
Hynynen, Finnish Forest Research Institute, Vantaa Research Unit, Vantaa, Finland E-mail: jh@nn.fi
Ojansuu, Finnish Forest Research Institute, Vantaa Research Unit, Vantaa, Finland E-mail: ro@nn.fi

article id 320, category Research article

Saija Huuskonen, Jari Hynynen. (2006). Timing and intensity of precommercial thinning and their effects on the first commercial thinning in Scots pine stands. Silva Fennica vol. 40 no. 4 article id 320. https://doi.org/10.14214/sf.320

Keywords: Pinus sylvestris; Scots pine; growth and yield; precommercial thinning; growth modelling; first commercial thinning; diameter development

Abstract | View details | Full text in PDF | Author Info

The effects of the timing and intensity of precommercial thinning on the stand diameter development and wood production in Scots pine stands was addressed. A model was developed in order to assess the thinning response of the stand diameter development. The effect of precommercial and first commercial thinning on the stand volume and the thinning removal at first commercial thinning were also modelled. The models were developed to be applicable for forest management planning purposes. The results are based on Scots pine (Pinus sylvestris L.) trials (13 experiments and 169 plots) located in Southern and Central Finland. Precommercial thinning considerably enhanced the diameter development. Precommercial thinning (at Hdom 3 m to 2000 trees per hectare) increased the mean diameter by 15% at the first commercial thinning stage (Hdom 14 m) compared to the unthinned stand (3000 trees ha–1). Early and intensive precommercial thinning resulted in the strongest response in diameter development. Wide spacing also enhanced the diameter increment. In naturally regenerated stands the diameter development was ca 13% slower than that in seeded stands. The total volume at the time of first commercial thinning was affected by the timing of thinning and the stand structure. The volume of merchantable thinning removal depended on the timing and intensity of precommercial and first commercial thinnings. Delaying the first commercial thinning from 12 meters (Hdom) to 16 meters increased the volume of thinning removal by ca.70%. The early and light precommercial thinning (Hdom 3 m, to density of 3000 trees per hectare) increased the thinning removal by 40% compared to the late and intensive precommercial thinning (at 7 meters to the density of 2000 trees per hectare).

Huuskonen, University of Helsinki, Dept. of Forest Ecology, P.O. Box 27, FI-00014 University of Helsinki, Finland E-mail: sh@nn.fi
Hynynen, The Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: jh@nn.fi

article id 636, category Research article

Tuula Nuutinen, Hannu Hirvelä, Jari Hynynen, Kari Härkönen, Hannu Hökkä, Kari T. Korhonen, Olli Salminen. (2000). The role of peatlands in Finnish wood production – an analysis based on large-scale forest scenario modelling. Silva Fennica vol. 34 no. 2 article id 636. https://doi.org/10.14214/sf.636

Keywords: peatlands; MELA; wood production; forest scenario modelling

Abstract | View details | Full text in PDF | Author Info

Using the Finnish MELA model, a set of scenarios were produced and used to map the possibilities and risks surrounding the utilisation of peatlands in wood production in Finland. One of the scenarios was an estimate of allowable-cut calculated by maximising the net present value of the future revenues using a four per cent interest rate subject to non-decreasing flow of wood, saw logs and net income over a 50-year period, and net present value after the 50 year period greater or equal than in the beginning. The estimate for maximum regionally sustained removal in 1996–2005 was 68 million m3 per year – approaching 74 million m3 during the next decades. In this scenario, 14 per cent of all cuttings during the period 1996–2005 would be made on peatlands, which comprise ca. 31 per cent of the total area of forestry land. By the year 2025, the proportion of peatland cuttings would increase to over 20 per cent. The increase in future cutting possibilities on peatlands compensated for a temporary decrease in cuttings and growing stock on mineral soils. The allowable-cut effect was especially pronounced in northern Finland, where peatlands play an important role in wood production. In addition, the sensitivity of cutting possibilities for assumptions related to growth and price were analysed. The estimate of maximum sustainable yield as defined here seems to be fairly robust on the whole, except in northern Finland where the cutting scenarios were sensitive to the changes in the price of birch pulpwood. The proportion of peatland stands that are profitable for timber production depends on the interest rate: the higher the rate of interest the less peatland stands are thinned. The effect of cutting profile on future logging conditions and resulting costs were analysed in two forestry centres. If clear cuttings on mineral soils are to be cut first, an increase in future logging costs is inevitable.

Nuutinen, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: tuula.nuutinen@metla.fi
Hirvelä, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: hh@nn.fi
Hynynen, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: jh@nn.fi
Härkönen, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: kh@nn.fi
Hökkä, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: hh@nn.fi
Korhonen, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: ktk@nn.fi
Salminen, Finnish Forest Research Institute, Joensuu Research Station, P.O. Box 68, FIN-80101 Joensuu, Finland E-mail: os@nn.fi

Click this link to register to Silva Fennica.

If you are a registered user, log in to save your selected articles for later access.

Contents alert

Your selected articles

Follow @SilvaFennica