Select issue
Silva Fennica 1926-1997
Acta Forestalia Fennica
+
1992-1999
+
1984-1991
+
1974-1983
+
1968-1973
+
1953-1968
+
1933-1952
+
1913-1932
Articles by Christian Kanzian
Category : Editorial
article id 23074,
category
Editorial
Christian Kanzian.
(2023).
Are productivity studies in forest operations old fashioned and no more publishable?
Silva Fennica
vol.
57
no.
3
article id 23074.
https://doi.org/10.14214/sf.23074
Full text in HTML
|
Full text in PDF |
Author Info
-
Kanzian,
Department of Forest and Soil Sciences, Institute of Forest Engineering, University of Natural Resources and Life Sciences, Vienna (BOKU), Peter-Jordan-Strasse 82, 1190 Vienna, Austria
https://orcid.org/0000-0002-1198-9788
E-mail:
christian.kanzian@boku.ac.at
Category : Research article
article id 23054,
category
Research article
Stephan Böhm,
Peter Baier,
Thomas Kirisits,
Christian Kanzian.
(2023).
Blue-stain development on Norway spruce logs under alpine conditions.
Silva Fennica
vol.
57
no.
3
article id 23054.
https://doi.org/10.14214/sf.23054
Keywords:
Picea abies;
moisture content;
temperature;
weather data;
bark beetle;
predictive model;
sap-stain
Highlights:
A nonlinear model was developed to predict the temperature-dependent spread rate of blue-stain in Norway spruce logs in alpine areas in Austria; The influence of temperature sum on the development of blue-stain was confirmed; The effect of harvesting season on the development and amount of sap-stain (faster and more extensive in summer than in spring) was observed.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
Discoloration of the sapwood caused by blue-stain fungi on conifer logs during interim storage causes significant loss to the forest industry. The fungal infection is often associated with bark beetle attacks because the spores are transmitted by the beetles. They can also be disseminated by rain-splash and moist air. While there are methods to protect logs from sap-stain in wood yards, this is often not possible in the forest for practical and regulatory reasons. Timing of harvesting and timely transportation are often the only ways to prevent blue-stain. To estimate the urgency of transportation, knowledge of the growth of blue-stain fungi and its dependence on weather conditions is of great interest.
The proportion of discolored sapwood on Norway spruce logs was recorded along a time series, together with weather data in two field experiments conducted in spring and summer at two alpine sites in Austria. A predictive model was developed to estimate the proportion of blue-stained sapwood based on the temperature sum to which the logs were exposed. After harvest in March, there was a time lag of 82 and 97 days at the two respective sites, caused by initially low temperatures, before discoloration started. In contrast, sap-stain occurred 14 days after the harvest in June, when warm conditions prevailed from the start. The nonlinear least square regression model can help to estimate a window of opportunity to transport wood before it loses its value and serves as a sub model for lead time estimation within logistic decision support systems.
-
Böhm,
Department of Forest and Soil Sciences, Institute of Forest Engineering, University of Natural Resources and Life Sciences, Vienna (BOKU), Peter-Jordan-Strasse 82, 1190 Vienna, Austria
https://orcid.org/0000-0001-7803-6618
E-mail:
stephan.boehm@boku.ac.at
-
Baier,
Department of Forest and Soil Sciences, Institute of Forest Entomology, Forest Pathology and Forest Protection, University of Natural Resources and Life Sciences, Vienna (BOKU), Peter-Jordan-Strasse 82, 1190 Vienna, Austria
https://orcid.org/0000-0002-1029-5637
E-mail:
peter.baier@boku.ac.at
-
Kirisits,
Department of Forest and Soil Sciences, Institute of Forest Entomology, Forest Pathology and Forest Protection, University of Natural Resources and Life Sciences, Vienna (BOKU), Peter-Jordan-Strasse 82, 1190 Vienna, Austria
https://orcid.org/0000-0002-9918-3593
E-mail:
thomas.kirisits@boku.ac.at
-
Kanzian,
Department of Forest and Soil Sciences, Institute of Forest Engineering, University of Natural Resources and Life Sciences, Vienna (BOKU), Peter-Jordan-Strasse 82, 1190 Vienna, Austria
https://orcid.org/0000-0002-1198-9788
E-mail:
christian.kanzian@boku.ac.at
article id 10178,
category
Research article
Franz Holzleitner,
Magdalena Langmaier,
Eduard Hochbichler,
Bernhardt Obermayer,
Karl Stampfer,
Christian Kanzian.
(2019).
Effect of prior tree marking, thinning method and topping diameter on harvester performance in a first thinning operation – a field experiment.
Silva Fennica
vol.
53
no.
3
article id 10178.
https://doi.org/10.14214/sf.10178
Keywords:
productivity;
time study;
harvester;
prior tree marking;
thinning method;
topping diameter;
video analysis
Highlights:
No effect on harvester performance due to prior tree marking detected; Operator selection versus prior tree marking was assessed; Operator could apply two different thinning methods; Prior tree marking seems to have a positive effect on residual stand damage.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
The effect of harvester operator tree selection or prior tree marking in thinning operations on satisfactory results and performance has been widely discussed. In harvester operator tree selection, the machine operator decides on the fly which trees are selected to remain or cut. The objective of the study was to analyze the effect of prior tree marking, thinning method and topping diameter on harvester performance in low-diameter thinning operations. The entire thinning operation was captured using video technology. Overall, 2.36 ha divided into 48 plots with 5202 trees were thinned with an average diameter at breast height (dbh) over bark for all plots of between 12.5 and 14.7 cm. In total, 3122 trees were harvested, resulting in 60% removal of stem number over all plots. The harvester achieved a mean productivity of 7.38 m3 PMH0–1 with 1.48 m3 PMH0–1 SEM, with stem volume having the major influence on harvesting productivity. Prior tree marking, topping and thinning method did not significantly affect productivity. Without prior tree marking by the foresters, harvesting removal was shifted toward lower diameters. Within the unmarked plots, 7.0% of the residual trees were damaged compared with 3.2% in marked plots.
-
Holzleitner,
University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria
https://orcid.org/0000-0001-8489-3050
E-mail:
franz.holzleitner@boku.ac.at
- Langmaier, University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Silviculture, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria; Austrian Research Centre for Forests, Department of Forest Growth and Silviculture, Seckendorff Gudent Weg 8, A-1130 Vienna, Austria E-mail: magdalena.langmaier@bfw.gv.at
- Hochbichler, University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Silviculture, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria E-mail: eduard.hochbichler@boku.ac.at
- Obermayer, University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria; Agricultural Technical School of Pyhra, Kyrnbergstraße 4, A-3143 Pyhra, Austria E-mail: bernhardt.obermayer@lfs-pyhra.ac.at
-
Stampfer,
University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria
http://orcid.org/0000-0001-9350-2859
E-mail:
karl.stampfer@boku.ac.at
-
Kanzian,
University of Natural Resources and Life Sciences Vienna, Department of Forest and Soil Sciences, Institute of Forest Engineering, Peter-Jordan-Straße 82/3, A-1190 Vienna, Austria
http://orcid.org/0000-0002-1198-9788
E-mail:
christian.kanzian@boku.ac.at
article id 899,
category
Research article
Franz Holzleitner,
Christian Kanzian,
Norbert Höller.
(2013).
Monitoring the chipping and transportation of wood fuels with a fleet management system.
Silva Fennica
vol.
47
no.
1
article id 899.
https://doi.org/10.14214/sf.899
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
Controlling and organizing the complex forest-to-consumer supply chain of wood fuels is a challenging task, especially for the chipping and transport processes. Truck mounted chippers and transport trailer-trucks must be scheduled to minimize delay to be profitable. Job management within the supply chain, including machine activity based controlling, offers a new way to increase efficiency and productivity. However, detailed data are required to detect and analyze potential gaps and improve forest fuel supply. Generally, data regarding the wood fuel supply chain process are obtained from extensive time studies that are based on a specific process step. Although time studies can detect details during the production of forest fuels, they only describe certain time frames. Long-term data that are recorded during the entire year could encompass seasonal and short term effects. This study aims to monitor the forest fuel supply processes (semi-automated), specifically regarding time and fuel consumption. Large data sets were automatically and efficiently gathered with little effort by drivers and operators. Data were recorded with fleet management equipment for more than 14 months. Vehicle data, including GPS data, were logged at an interval of one minute. Data management was conducted in a pre-configured database that contained pre-defined reports and were run by the Institute of Forest Engineering, Vienna. Work step assignments were implemented with Structured Query Language (SQL)-routines by using the raw machine activities data and GPS. The chipping and transport activities of more than 240 loads were analyzed by focusing on fuel consumption, time needed and traffic. The average distance between chipping sites and plants was approximately 54 kilometers. Fuel consumption from transport reached 50 l/100 km. The chipping unit reached a productivity of 12.8 odt/PSH15 and had a fuel consumption of 58 liters per operating hour.
-
Holzleitner,
Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria
E-mail:
franz.holzleitner@boku.ac.at
- Kanzian, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria E-mail: christian.kanzian@boku.ac.at
- Höller, Institute of Forest Engineering, Department of Forest and Soil Sciences, University of Natural Resources and Life Sciences, Peter Jordanstrasse 82/3, 1190 Vienna, Austria E-mail: norbert.hoeller@boku.ac.at
article id 910,
category
Research article
Gernot Erber,
Christian Kanzian,
Karl Stampfer.
(2012).
Predicting moisture content in a pine logwood pile for energy purposes.
Silva Fennica
vol.
46
no.
4
article id 910.
https://doi.org/10.14214/sf.910
Abstract |
View details
|
Full text in PDF |
Author Info
Determining the moisture content of naturally dried fuel stock without frequent measuring is a problem still unsolved. Modelling moisture content based on automatically captured meteorological data could provide a solution. An accurate model would allow the drying period and the point of chipping to be optimised. For the experimental study, a metal frame supported by load sensors and loaded with 17 tons of logwood was set up next to a meteorological station. A multiple linear regression model was used to link meteorological and load data to provide a formula for determining the moisture content. The pile dried for a period of 14 months (average temperature of 7.3 °C, a humidity of 81%, and 777 mm of rainfall). The overall moisture content dropped from 50.1% to 32.2%. The regression model, which based on daily means and sums of meteorological parameters, provided a mean deviance from the observed curve of –0.51%±0.71% within the period of investigation. Relative humidity was found to be most important parameter in drying. Increased moisture content resulting from rainfall greater than 30 mm per day reverted back to pre-rainfall values within two to three days, if no other rainfall events followed. Covering the pile would have a positive effect on the drying performance. In terms of economic benefit it could be shown that natural drying is beneficial. Overall this study shows that meteorological data used in site specific drying models can adequately predict the moisture content of naturally dried logwood.
-
Erber,
University of Natural Resources and Life Sciences, Peter Jordan-Strasse 82, 1190 Wien, Austria
E-mail:
gernot.erber@boku.ac.at
- Kanzian, University of Natural Resources and Life Sciences, Peter Jordan-Strasse 82, 1190 Wien, Austria E-mail: christian.kanzian@boku.ac.at
- Stampfer, University of Natural Resources and Life Sciences, Peter Jordan-Strasse 82, 1190 Wien, Austria E-mail: karl.stampfer@boku.ac.at
article id 464,
category
Research article
Christian Kanzian,
Franz Holzleitner,
Karl Stampfer,
Sarah Ashton.
(2009).
Regional energy wood logistics – optimizing local fuel supply.
Silva Fennica
vol.
43
no.
1
article id 464.
https://doi.org/10.14214/sf.464
Abstract |
View details
|
Full text in PDF |
Author Info
The promotion of electric energy production from solid biomass by the Austrian government has lead to a boom in the construction of new combined heat and power plants. The current total demand for wood chips in the research area for energy purposes is 70 400 m3 of loose volume chips per year. The expected increase in demand due to these new plants is more than 4 times greater than current demand: up to 302 700 m3 of loose volume per year. Even if the energy wood feedstock potential is satisfactory, the design of the supply chain is still unresolved. The aim of this study is to give decision-makers a base for further development. To accomplish this, we designed and tested four different supply scenarios: one for 9 plants and one for 16 plants. The scenarios were developed using a combination of geographic information systems (GIS) and linear programming methods. The results indicate that direct transport of solid fuel wood as round wood and chipping at the plant is the cheapest supply system with a resulting cost of 5.6–6.6 EUR/m3 loose. Using harvesting residues can only be recommended for large plants because of poor fuel quality. In this case, residues would be chipped at or near the landing, piled and transported via self-loading trucks at a cost between 8.4 and 9.1 EUR/m3 loose. In order to meet increasing demand and to ensure a continuous supply, especially during the winter and spring seasons it is necessary to optimize the supply chain by including storage terminals. However, using terminals and increased demand both lead to higher logistical costs. For example, if the total volume is handled via terminals, the average supply costs including storage will increase by 26%. Higher demand increases the costs by 24%.
-
Kanzian,
University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria
E-mail:
christian.kanzian@boku.ac.at
- Holzleitner, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria E-mail: fh@nn.at
- Stampfer, University of Applied Life Sciences Vienna, Institute of Forest Engineering, Peter Jordan Strasse 82, A-1190 Vienna, Austria E-mail: ks@nn.at
- Ashton, Southern Regional Extension Forestry, Forestry Bldg. 4-420, University of Georgia, Athens, GA 30602, USA E-mail: sa@nn.us
Click this link to register to Silva Fennica.
If you are a registered user, log in to save your selected articles for later access.
Your selected articles
Silva Fennica ·
Finnish Society of Forest Science
