Select issue
Silva Fennica 1926-1997
Acta Forestalia Fennica
+
1992-1999
+
1984-1991
+
1974-1983
+
1968-1973
+
1953-1968
+
1933-1952
+
1913-1932
Articles by Ola Lindroos
Category : Research article
article id 10755,
category
Research article
Rikard Jonsson,
Lotta Woxblom,
Rolf Björheden,
Eva-Maria Nordström,
Bosko Blagojevic,
Ola Lindroos.
(2022).
Analysis of decision-making processes for strategic technology investments in Swedish large-scale forestry.
Silva Fennica
vol.
56
no.
3
article id 10755.
https://doi.org/10.14214/sf.10755
Keywords:
information needs;
qualitative analysis;
harwarder;
forest technology development;
semi-structured interviews;
unstructured decision processes
Highlights:
When making development decisions, respondents representing six relatively large users of forest technology aimed to maximize economic criteria without falling below threshold values for criteria such as operator well-being, soil rutting, and wood value; Collaboration between users, manufacturers, and researchers was found to be important; Decision-making could be improved by using tools such as problem-structuring methods, simulations, and optimization.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
Technological development gives forest companies opportunities to maintain competitiveness in the highly cost-sensitive market for forest products. However, no previous studies have examined the technological development decisions made by forest companies or the support tools used when making them. We therefore aimed to describe and analyze 1) the processes used when making such decisions, 2) the associated decision situations, and 3) the use of and need for decision support tools in these processes, with a harwarder concept as case. Semi-structured interviews were conducted with respondents from six forestry organizations. Two theoretical frameworks were used to analyze the interviews, one for unstructured decision processes and one for decision situations. The respondents’ descriptions of their decision processes were consistent with those observed in other industries, and it was shown that decision-making could potentially be improved by investing more resources into diagnosing the problem at hand. The main objective in decision-making was to maximize economic criteria while satisfying threshold requirements relating to criteria such as operator well-being, soil rutting, and wood value. When facing large uncertainties, interviewees preferred to gather data through operational trials and/or scientific studies. If confronted with large uncertainties that could not be reduced, they proceeded with development only if the potential gains exceeded the estimated uncertainties, and implemented innovations in a stepwise manner. These results indicate a need for greater use of existing decision-support tools such as problem-structuring methods to enable more precise diagnoses, simulations to better understand new innovations, and optimization to better evaluate their theoretical large-scale potential.
-
Jonsson,
The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden
E-mail:
rikard.jonsson@skogforsk.se
- Woxblom, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: lotta.woxblom@skogforsk.se
- Björheden, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: rolf.bjorheden@skogforsk.se
- Nordström, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-901 83 Umeå, Sweden E-mail: eva-maria.nordstrom@slu.se
- Blagojevic, University of Novi Sad, Department of Water Management, Trg D. Obradovica 8, 21000 Novi Sad, Serbia E-mail: bosko.blagojevic@polj.edu.rs
- Lindroos, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 1546,
category
Research article
Jussi Manner,
Lauri Palmroth,
Tomas Nordfjell,
Ola Lindroos.
(2016).
Load level forwarding work element analysis based on automatic follow-up data.
Silva Fennica
vol.
50
no.
3
article id 1546.
https://doi.org/10.14214/sf.1546
Keywords:
harvesting;
cut-to-length logging;
haulage;
data gathering;
automatic recording;
classification algorithm;
Hidden Markov Models
Highlights:
Recent developments in on-board technology enables automatic collection of follow-up data on forwarder work; Time consumption per load was more strongly associated with Loading drive distance than with extraction distance, indicating that the relevance of extraction distance as a main indicator of forwarding productivity should be re-considered; Data, within variables, were positively skewed with a few exceptions with normal distributions.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
Recent developments in on-board technology have enabled automatic collection of follow-up data on forwarder work. The objective of this study was to exploit this possibility to obtain highly representative information on time consumption of specific work elements (including overlapping crane work and driving), with one load as unit of observation, for large forwarders in final felling operations. The data used were collected by the John Deere TimberLink system as nine operators forwarded 8868 loads, in total, at sites in mid-Sweden. Load-sizes were not available. For the average and median extraction distances (219 and 174 m, respectively), Loading, Unloading, Driving empty, Driving loaded and Other time effective work (PM) accounted for ca. 45, 19, 8.5, 7.5 and 14% of total forwarding time consumption, respectively. The average and median total time consumptions were 45.8 and 42.1 minutes/load, respectively. The developed models explained large proportions of the variation of time consumption for the work elements Driving empty and Driving loaded, but minor proportions for the work elements Loading and Unloading. Based on the means, the crane was used during 74.8% of Loading PM time, the driving speed was nonzero during 31.9% of the Loading PM time, and Simultaneous crane work and driving occurred during 6.7% of the Loading PM time. Time consumption per load was more strongly associated with Loading drive distance than with extraction distance, indicating that the relevance of extraction distance as a main indicator of forwarding productivity should be re-considered.
-
Manner,
The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala, Sweden
E-mail:
jussi.manner@skogforsk.se
- Palmroth, John Deere Forestry, P.O. Box 472, FI-33101 Tampere, Finland E-mail: PalmrothLauri@JohnDeere.com
- Nordfjell, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: tomas.nordfjell@slu.se
- Lindroos, Swedish University of Agricultural Sciences, Department of Forest Biomaterials and Technology, SE-901 83 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 1064,
category
Research article
Back Tomas Ersson,
Urban Bergsten,
Ola Lindroos.
(2014).
Reloading mechanized tree planting devices faster using a seedling tray carousel.
Silva Fennica
vol.
48
no.
2
article id 1064.
https://doi.org/10.14214/sf.1064
Keywords:
productivity;
cost analysis;
seedling feed;
silviculture;
time study;
tree planting machine;
containerized seedling
Highlights:
Seedling reloading onto the Bracke Planter crane-mounted planting device was twice as fast with the MagMat tray-wise-loaded carousel as today’s seedling-wise-loaded carousel; Tray-wise reloading combined with deplugging seedlings from suitable cultivation trays has the potential to be an efficient and robust way to feed seedlings on any type of tree planting machine.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
On Nordic clearcuts, today’s tree planting machines produce high-quality but costly regenerations. Much of this high cost is attributable to the planting machines’ low productivity. One promising way of raising productivity is to lessen the time spent manually reloading seedlings onto the carousels of crane-mounted planting devices. Using MagMat, a carousel test-rig designed by engineering students, we studied how much faster tray-wise seedling reloading is on the Bracke Planter compared to reloading with today’s seedling-wise-loaded carousel. The MagMat test-rig held eight Hiko cultivation trays from which seedlings were deplugged individually and dropped into the planting tube. The time study confirmed that seedling reloading was on average twice as fast with MagMat compared to today’s seedling carousel, thereby increasing assumed planting machine productivity by 8–9% depending on the planting device used. MagMat’s cost-efficiency was analysed to be particularly reliant on its added investment cost, mechanical availability and how quickly trays can be switched automatically. Nevertheless, MagMat’s field performance illustrated the overall potential of tray-wise loading compared to piecewise seedling loading for increasing the productivity of crane-mounted planting devices. Also, deplugging proved to be a reliable method of extracting seedlings from the rigid, copper-painted Hiko cultivation trays even when performed at the excavator’s boom-tip during mounding work. We conclude that, rather than piecewise seedling loading, tray-wise loading combined with deplugging seedlings from suitable cultivation trays is a reliable and much more time-efficient method to feed seedlings on probably any type of tree planting machine.
-
Ersson,
Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden
E-mail:
back.tomas.ersson@slu.se
- Bergsten, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: urban.bergsten@slu.se
- Lindroos, Department of Forest Biomaterials and Technology, SLU, SE-90183 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 1030,
category
Research article
Jussi Manner,
Tomas Nordfjell,
Ola Lindroos.
(2013).
Effects of the number of assortments and log concentration on time consumption for forwarding.
Silva Fennica
vol.
47
no.
4
article id 1030.
https://doi.org/10.14214/sf.1030
Keywords:
productivity;
time study;
forest haulage;
forwarders;
cut-to-length logging;
log extraction;
terrain transport
Highlights:
We analysed the effects of total and forwarded log concentrations (m3 (100 m)–1) and the number of loaded assortments on forwarding; The combination of the number of loaded assortments and their abundance (i.e. forwarded log concentration) affected time consumption most; This knowledge enables improved efficiency by optimizing number and assortment proportions in the various loads required to forward a stand.
Abstract |
Full text in HTML
|
Full text in PDF |
Author Info
Forwarding has been carried out for 50 years, but much is still unknown about this work. Its complexity comes from both stand features and essential decision-making. Forwarding time consumption is influenced by e.g. log concentrations and number of assortments. Traditionally, focus has been on the total log concentration (TLC), referring to all logs at the harvesting site. However, we focused on forwarded log concentration (FLC), the load-specific log concentration which depends on the assortment distribution at harvesting site and the load-specific number of assortments. To evaluate the effects of TLC, number of assortments in a load and FLC on the loading and unloading times, a standardized field experiment was carried out. Pile and load sizes were constant, while TLC and FLC were manipulated by varying the pile distribution on the test path. For all work elements, the time consumption per m3 was significantly affected by the number of assortments that were loaded, but only the “driving while loading” work element was also significantly influenced by TLC. However, when untangling the intercorrelation between tested factors, it was found that the time consumption for driving while loading significantly decreased as a function of FLC and was unaffected by the number of assortments in a load. That FLC influences the forwarding time consumption highlights the need to study the effects of combining various assortment proportions in a load. Such knowledge will enable analysis of the most efficient number and assortment proportions to combine in the various loads required to forward a given stand.
-
Manner,
Swedish University of Agricultural Sciences, Department of Forest Biomaterial and Technology, SE-901 83 Umeå, Sweden
E-mail:
jussi.manner@slu.se
- Nordfjell, Swedish University of Agricultural Sciences, Department of Forest Biomaterial and Technology, SE-901 83 Umeå, Sweden E-mail: tomas.nordfjell@slu.se
- Lindroos, Swedish University of Agricultural Sciences, Department of Forest Biomaterial and Technology, SE-901 83 Umeå, Sweden E-mail: ola.lindroos@slu.se
article id 108,
category
Research article
Back Tomas Ersson,
Urban Bergsten,
Ola Lindroos.
(2011).
The cost-efficiency of seedling packaging specifically designed for tree planting machines.
Silva Fennica
vol.
45
no.
3
article id 108.
https://doi.org/10.14214/sf.108
Keywords:
logistics;
mechanized planting;
containerized seedlings;
seedling transport;
cost analysis;
seedling feed;
nursery technology
Abstract |
View details
|
Full text in PDF |
Author Info
Today’s crane-mounted planting heads plant seedlings with biologically similar or better results than operational manual planting. However, the total cost of mechanized tree planting in southern Sweden must decrease at least 25% to compete economically with manual planting. Although seedlings packed in machine-specific packaging increase the productivity of planting machines by reducing seedling reloading time, they also increase logistics and investment costs. In this study, we analyzed the total cost of outplanting seedlings with an excavator-mounted Bracke Planter and seedlings packed according to four different concepts: cultivation trays, cardboard boxes, band-mounted seedlings in cardboard boxes and linked pots in container modules. The total cost per planted seedling was calculated for each packaging system as the sum of all costs from nursery to the recovery of empty packaging. The results showed that today’s system of transporting seedlings in cultivation trays is the most cost-efficient of the four alternatives. Machine-specific seedling packaging was 16–23% costlier per planted seedling than cultivation trays when trucking distances were 100 km. Sensitivity analyses indicated that machine-specific seedling packaging increased in cost-efficiency relative to cultivation trays primarily when more planting machines were contracted, but also as planting machine fixed costs and productivity increased. Moreover, the relative cost-efficiency of band-mounted seedlings, but not seedlings in container modules, increased with increasing trucking distance. Thus, we show that investments in machine-specific seedling packaging for today’s planting machines are justified only when the fixed costs, productivity and number of contracted planting machines increase substantially.
-
Ersson,
Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden
E-mail:
back.tomas.ersson@slu.se
- Bergsten, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ub@nn.se
- Lindroos, Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-90183 Umeå, Sweden E-mail: ol@nn.se
article id 135,
category
Research article
Ola Lindroos,
Marina Henningsson,
Dimitris Athanassiadis,
Tomas Nordfjell.
(2010).
Forces required to vertically uproot tree stumps.
Silva Fennica
vol.
44
no.
4
article id 135.
https://doi.org/10.14214/sf.135
Abstract |
View details
|
Full text in PDF |
Author Info
Stumpwood attracts renewed interest due to increased use of forest biomass for bioenergy. In Nordic countries stumps are generally uprooted with crawler excavators, which have strong cranes (ca. 400 kNm gross lift torque), but are not designed for moving in forest terrain. Their use is based on practical experience with available and tested machine types rather than thorough examinations of requirements, partly due to limited knowledge of force requirements for uprooting of stumps. Therefore, in this work mean and maximum forces required to vertically uproot stumps of Norway spruce (Picea abies) and birch (Betula spp.) were quantified together with the effects of various soil types and uprooting methods. The used excavator’s crane-mounted uprooting device enabled comparisons between usage of solely crane force, and a method in which preparatory loosening forces were applied prior to crane force. Uprooting stumps in single pieces proved difficult; 61% split unintentionally. Force requirements were similar across tree species, increasing curve-linearly with stump diameter, and stumps uprooted in a single piece required more force than split stumps. Preparatory loosening reduced crane force requirements and, surprisingly, less force was required to uproot stumps from a mesic, till soil than from a moist, finer-textured soil. No stump required more than 60 kN crane force and functions for maximum force requirements indicate that powerful harvesters and forwarders (gross crane lifting capacity of 273 and 155 kNm, respectively) should be able to uproot all stumps with ≤ 61 cm and ≤ 32 cm diameter, respectively, in one piece. Larger stumps could be managed if it is acceptable that stumps are split before uprooting.
-
Lindroos,
Department of Forest Resource Management, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden
E-mail:
ola.lindroos@srh.slu.se
- Henningsson, Komatsu Forest AB, Box 7124, SE-907 04 Umeå, Sweden E-mail: mh@nn.se
- Athanassiadis, Department of Forest Resource Management, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden E-mail: da@nn.se
- Nordfjell, Department of Forest Resource Management, Swedish University of Agricultural Sciences, SE-901 83 Umeå, Sweden E-mail: tn@nn.se
article id 227,
category
Research article
Ola Lindroos.
(2008).
The effects of increased mechanization on time consumption in small-scale firewood processing.
Silva Fennica
vol.
42
no.
5
article id 227.
https://doi.org/10.14214/sf.227
Keywords:
comparative time study;
fuelwood;
blade saw;
wedge splitter;
processor;
senior worker;
operator effects
Abstract |
View details
|
Full text in PDF |
Author Info
Firewood, which is mainly processed by the consumer, is still an important source of energy for heating houses in industrialised countries. Possibilities to compare the mechanization’s impact on efficiency of firewood processing are limited, due to variations between working conditions in previous studies. Therefore, the objective was to compare time consumption for two small-scale firewood processing systems with different levels of mechanisation under identical conditions. The systems were tested on two classes of wood: one with a homogeneous and medium-sized diameter of logs and one with a mixture of small and large-diameter-logs. Differences in time consumption were analysed for correlations with physical workloads, deviations to routine operations, operator influences and operator perceptions. Twelve operators (60–79 years old) were studied and they showed large variation in time consumption. However, the within-operator time consumption patterns were consistent. In other words, operators all responded similarly to the different combinations of systems and wood classes, but at different absolute levels. The time required to process a unit volume of wood was 25–33% lower when the more highly mechanised system was used, and the time required was 13–22% lower for the homogeneous wood class. Physical work load, deviations and perceptions of the work varied between operators, but were weakly correlated with time consumption. The results’ implications for analyses of investments in equipment for firewood-processing for self-sufficiency purposes are discussed.
-
Lindroos,
Swedish University of Agricultural Sciences, Department of Forest Resource Management, SE-901 83 Umeå, Sweden
E-mail:
ola.lindroos@srh.slu.se
Category : Research note
article id 148,
category
Research note
Ola Lindroos,
Magnus Matisons,
Petter Johansson,
Tomas Nordfjell.
(2010).
Productivity of a prototype truck-mounted logging residue bundler and a road-side bundling system.
Silva Fennica
vol.
44
no.
3
article id 148.
https://doi.org/10.14214/sf.148
Keywords:
bioenergy;
compaction;
composite residue logs;
densification;
road-side landing;
slash;
supply chain
Abstract |
View details
|
Full text in PDF |
Author Info
When recovering logging residues (LR) for bioenergy its density should be increased before road transport, otherwise a low proportion of the trucks’ load capacity will be used. One way this can be currently done is to compress LR into bundles that are forwarded to roadside landing. A less well-developed alternative is to forward loose LR and bundle it at landing. In the presented study, a prototype specifically developed for road-side bundling was found to produce larger, heavier bundles than bundling machinery intended for in-field use (mean length, diameter and raw bulk density 4.7 m, 0.8 m and 285 kg m–3, respectively, with 299–445 kg oven dry matter per bundle). The machine was also at least 30% more productive than previously described in-field bundling systems, producing 14–19 bundles per productive work hour (PWh), equivalent to 5.2–7.8 oven-dry tonnes PWh–1. Bundles were estimated to use 67–86% of an LR truck’s 30 tonnes load capacity, similar to proportions used when transporting loose LR. However, a continuous feeding and compressing process would probably almost double productivity, while longer bundles would enable full use of truck load capacity. With such improvements bundling at road-side could provide a viable alternative to current LR-recovering systems.
-
Lindroos,
Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden
E-mail:
ola.lindroos@srh.slu.se
- Matisons, Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: mm@nn.se
- Johansson, Sveaskog Förvaltnings AB, Vindeln, Sweden E-mail: pj@nn.se
- Nordfjell, Department of Forest Resource Management, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: tn@nn.se
Click this link to register to Silva Fennica.
If you are a registered user, log in to save your selected articles for later access.
Your selected articles
Silva Fennica ·
Finnish Society of Forest Science
