Articles containing the keyword 'raakapuu'

When Finland attained independence in 1917–1918, about 65% of her population made their linving from agriculture and only 17% from industry. Despite the fact that most sectors of the modern forest industry, i.e. sawmilling, pulp and paper making as well as plywood industry were then in existence a considerable proportion of timber was exported as roundwood.

It was reasonable to assume, however, that further economic development would reduce the roundwood exports to provide raw material for industry. The present paper investigates the Finnish roundwood exports in 1921–1986 largely from the point of view of this hypothesis. Examination of statistics is focused on the change of volume of exports in the major categories of wood, changes in the trade policies of consumer countries, changes in competition between exporting countries and changes in Finnish export policy.

The PDF includes an abstract in English.

• Holopainen, E-mail: vh@mm.unknown

In this paper the system of collective timber price agreement in Norway is described. The history of »collective behaviour» in the roundwood market can be tracked far back in history, with different degrees of importance, and it has totally dominated the price-formation of roundwood from the 1950’s until the present. In trying to answer the question »What has been the effect of the collective price agreements» a few theoretical market models are used and the empirical data are also employed. Both the theoretical discussion and the empirical data seem to indicate that the forest owners are better off with collective price agreements than with a situation where there are no organized price-negotiations.

The PDF includes a summary in English.

• Høsteland, E-mail: jh@mm.unknown

This study was carried out on behalf of the Central Association of Finnish Forest Industries (now Finnish Forest Industries Federation) in order to obtain information about the wood raw material situation, to serve, in turn, as a basis for the forest industries’ long-term planning. The study deals with the potential supply of roundwood, industrial residue and forest residue by the year 200 by five wood-supply areas. Examination of the situation during the period of 1972–80 is based on available balances and that concerning the period 1985–2000 in the estimated quantities available for industrial use.

The PDF includes a summary in English.

• Suomen Metsäteollisuuden Keskusliitto, E-mail: –

The present study is an examination of the problems involved in raw-wood inventory from the viewpoint of business economics. The term inventory used here includes the standing timber marked for cutting as well as delivery contracts. The task of inventory is to buffer the differences in timing, locality, quantity and quality caused by purchase, production and delivery processes. The basic problem is concerned with profits.

The basic aim is to keep the inventory small. Its limits are determined by comparing the storage costs and costs of shortage. The costs may be decreased without risking the reliability of deliveries by technical development and road improvement, which also decrease dependence on the seasonal variation of harvesting of timber. A model based on present practices, statistics and practical experiences can be used to calculate different alternatives. The volume of purchases, felling, deliveries, transportation, and differences in quantities and transfer is used to estimate the target level of the inventory. It forms a forecast which the future performances can be compared to. In addition to monitoring turnover rate of the total inventory and capital tied to the inventory, also the exceptions in structure, time and quantity of the inventory and the factors changing it should be monitored. A special difficulty in timber inventory book-keeping are the continuous variations in the measured volumes even if no loss occurs.

The PDF includes a summary in English.

• Einola, E-mail: je@mm.unknown

A Commission was appointed to examine the significance of pulpwood exports from the political-economic and social point of view. A survey was made of the development of woodworking industry in Finland. The article includes a detailed review on paper industry in Finland and abroad, pulpwood resources in Finland and outlook of the industry. The export of pulpwood was significant in 1925-1927, the most important country being Germany. The commission notes that It would be more profitable to refine the wood into more expensive products. It does, however, not see it necessary to restrict export of pulpwood. If restrictions are considered necessary, prohibition of export is a better way than export duties.

The best way to promote domestic paper industry is to increase the supply of Norway spruce (Picea abies (L.) H. Karst.). Measures are suggested to increase the productivity of the forests through forest improvement. The annual increment of spruce is calculated to cover the consumption in near future, provided the export of pulpwood does not amount to 600,000 m³, and the local demand of pulpwood does not exceed 7.8 million m³ annually. The Commission proposes that state ownership of forests is increased, forest management is intensified, and restrictions of forest industry to acquire forest land are removed.

It suggests also reliefs in taxation and import duties on fields related to transport, and equipment and raw materials needed by the paper industry.

The PDF includes a summary in English.

• Paperipuun-vientikomitea, E-mail: pv@mm.unknown

Central Association of Finnish Forest Industries decided in 1953 to begin collecting annual statistics of timber transportation of its members. The survey of members covers almost 97% of the timber transportations of the member companies, which have production over 1,000 cu ft. In all 79 companies answered the survey. Their total timber transportation was 166,4 million cu ft in 1952.

The long-distance transportation of saw logs by horse transport directly to the mill or other such location was 1,297 cu ft, by truck transport 42,644 cu ft, by rail transport 6,707 cu ft, and by water transport 115,789 cu ft. The average transportation distance was for horse transport 2.4 km, truck transport 27 km, rail transport 224 km and water transport 209 km.

The Acta Forestalia Fennica issue 61 was published in honour of professor Eino Saari’s 60th birthday.
The PDF includes a summary in German.

• Lindfors, E-mail: jl@mm.unknown

The export of roundwood from Finland was studied based on the official statistics of foreign trade. The volumes were converted to solid volumes under bark. Roundwood (logs and masts) or raw timber trade consisted mainly of saw logs. The main tree species was Scots pine (Pinus sylvestrs L.) and Norway spruce (Picea abies (L.) H. Karst.). The annual volumes varied from 29,200 m³ in the war year 1918 to 657,200 m³ in 1924. Before the World War I the roundwood was exported mainly to Sweden and Russia, after the war the trade to Russia ceased. Also split spillet was a significant export item before the war. The export peaked in 1916 to 3 million m³, but decreased after the war to 30,000‒40,000 m³. The most important export item in the group of hewn timber has been Egyptian rafters, with annual export of 15,000‒284,600 m³ with the exception of the time of war. The export of spars exported to other countries than Egypt was highest before the war with 125,000 m³. The export of sleepers varied strongly, peaking in 1922. The total export of roundwood varied from 131,000 m³ in 1918 to 4.3 million m³ in 1927. Roundwood has mainly been exported to the European countries. Before the war, the main trading partners were United Kingdom and Russia. After the war the share of United Kingdom was nearly half of the volume, and Russia was replaced with Sweden.

The PDF includes a summary in German.

• Pöntynen, E-mail: vp@mm.unknown