Current issue: 58(1)

Under compilation: 58(2)

Scopus CiteScore 2021: 2.8
Scopus ranking of open access forestry journals: 8th
PlanS compliant
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Gunnar Jansson

Category : Research article

article id 2018, category Research article
Sima Mohtashami, Lars Eliasson, Gunnar Jansson, Johan Sonesson. (2017). Influence of soil type, cartographic depth-to-water, road reinforcement and traffic intensity on rut formation in logging operations: a survey study in Sweden. Silva Fennica vol. 51 no. 5 article id 2018. https://doi.org/10.14214/sf.2018
Keywords: soil disturbance; forestry; forwarder; decision support tool
Highlights: Soil type and traffic intensity had significant effects on rut formation; Further studies are required to identify all factors affecting rut formation, especially on soils with medium bearing capacity; The cartographic depth-to-water index (DTW) alone did not predict rut formation, but used in combination with other information, e.g. soil type, could be an interesting tool for delineating soil areas that are potentially vulnerable to rut formation in logging operations.
Abstract | Full text in HTML | Full text in PDF | Author Info

Rut formation caused by logging operations has been recognised as a challenge for Swedish forestry. Frequent traffic with heavy machines on extraction roads, together with a warmer climate, is one of the factors that increases the risk of rut formation in forests. One possible way to control this impact of logging operations is to design and apply decision support tools that enable operators to take sensitive areas into account when planning extraction roads. In this study, 16 different logging sites in south-eastern Sweden were surveyed after clear-cut. Information was collected about extraction roads (i.e. traffic intensity, whether the roads had been reinforced with slash) and ruts. Digital maps such as cartographic depth-to-water (DTW) index and soil type were also examined for any connection to rut positions. Soil type and traffic intensity were found to be significant factors in rut formation, while DTW and slash reinforcement were not. However, the DTW map combined with other information, such as soil type, could contribute to decision support tools that improve planning of extraction roads.

  • Mohtashami, The forestry research institute of Sweden, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: sima.mohtashami@skogforsk.se (email)
  • Eliasson, The forestry research institute of Sweden, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden ORCID http://orcid.org/0000-0002-2038-9864 E-mail: lars.eliasson@skogforsk.se
  • Jansson, The forestry research institute of Sweden, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden ORCID http://orcid.org/0000-0002-3018-9161 E-mail: gunnar.jansson@skogforsk.se
  • Sonesson, The forestry research institute of Sweden, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden ORCID http://orcid.org/0000-0002-2018-7496 E-mail: johan.sonesson@skogforsk.se
article id 1713, category Research article
Lars-Göran Stener, Lars Rytter, Gunnar Jansson. (2017). Effects of pruning on wood properties of planted silver birch in southern Sweden. Silva Fennica vol. 51 no. 2 article id 1713. https://doi.org/10.14214/sf.1713
Keywords: wood defects; discolouration; rot; ingrown bark
Highlights: Pruning silver birch trees increased the production of defect-free wood outside the knots; Most wood defects were found inside the knots; Pruned birch trees provide butt logs with higher value than unpruned trees.
Abstract | Full text in HTML | Full text in PDF | Author Info

Pruning was performed at midsummer in two genetically homogenous and managed planted silver birch stands in southern Sweden – one aged 9 and one aged 10 years. Wood defects were analysed 10 years thereafter, using the five uppermost twigs of the stems up to a height of 30 dm. The number of trees examined at each site was around 70, of which half were pruned. The main findings were that: a) compared to unpruned trees, pruned trees produced more defect-free wood outside the knots; b) most wood defects were found inside the knots; and c) wood defects like rot and bark ingrowth were similar for pruned and unpruned trees, while discolouration was marginally higher for pruned trees inside knots but similar outside knots. Overall, the results confirm previous findings that pruned birch trees will provide butt logs with higher value than unpruned trees.

  • Stener, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars-goran.stener@skogforsk.se (email)
  • Rytter, The Forestry Research Institute of Sweden, Ekebo 2250, 268 90 Svalöv, Sweden E-mail: lars.rytter@skogforsk.se
  • Jansson, The Forestry Research Institute of Sweden, Uppsala Science Park, 751 83 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se
article id 1562, category Research article
Mats Erik Berlin, Torgny Persson, Gunnar Jansson, Matti Haapanen, Seppo Ruotsalainen, Lars Bärring, Bengt Andersson Gull. (2016). Scots pine transfer effect models for growth and survival in Sweden and Finland. Silva Fennica vol. 50 no. 3 article id 1562. https://doi.org/10.14214/sf.1562
Keywords: Pinus sylvestris; adaptation; tree breeding; reaction patterns; forest regeneration material
Highlights: Scots pine transfer effect models for growth and survival, valid in both Sweden and Finland have been developed; The models use high-resolution gridded climate data and can predict performance in future climatic conditions; The models perform well both for unimproved and genetically improved material and can be used to develop deployment recommendations of contemporary forest regeneration material in Sweden and Finland.
Abstract | Full text in HTML | Full text in PDF | Author Info

In this study, we developed models of transfer effects for growth and survival of Scots pine (Pinus sylvestris L.) in Sweden and Finland using a general linear mixed-model approach. For model development, we used 378 provenance and progeny trials with a total of 276 unimproved genetic entries (provenances and stand seed check-lots) distributed over a wide variety of climatic conditions in both countries. In addition, we used 119 progeny trials with 3921 selected genetic entries (open- and control pollinated plus-tree families) for testing model performance. As explanatory variables, both climatic indices derived from high-resolution gridded climate datasets and geographical variables were used. For transfer, latitude (photoperiod) and, for describing the site, temperature sum were found to be main drivers for both survival and growth. In addition, interaction terms (between transfer in latitude and site altitude for survival, and transfer in latitude and temperature sum for growth) entail changed reaction patterns of the models depending on climatic conditions of the growing site. The new models behave in a way that corresponds well to previous studies and recommendations for both countries. The model performance was tested using selected plus-trees from open and control pollinated progeny tests. Results imply that the models are valid for both countries and perform well also for genetically improved material. These models are the first step in developing common deployment recommendations for genetically improved forest regeneration material in both Sweden and Finland.

  • Berlin, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: mats.berlin@skogforsk.se (email)
  • Persson, Skogforsk, Box 3, SE-91821 Sävar, Sweden E-mail: torgny.persson@skogforsk.se
  • Jansson, Uppsala Science Park, SE-75183 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se
  • Haapanen, Natural Resources Institute Finland (Luke), Green Technology, Box 18, FI-01301 Vantaa, Finland E-mail: matti.haapanen@luke.fi
  • Ruotsalainen, Natural Resources Institute Finland (Luke), Green Technology, Finlandiantie 18, FI-58450 Punkaharju, Finland E-mail: seppo.ruotsalainen@luke.fi
  • Bärring, Rossby Centre, Swedish Meteorological and Hydrological Institute, Folkborgsvägen 17, SE-60176 Norrköping, Sweden E-mail: lars.barring@smhi.se
  • Andersson Gull, Skogforsk, Box 3, SE-91821 Sävar, Sweden E-mail: bengt.andersson@skogforsk.se
article id 1243, category Research article
Curt Almqvist, Gunnar Jansson. (2015). Effects of pruning and stand density on cone and pollen production in an experimental Pinus sylvestris seed orchard. Silva Fennica vol. 49 no. 4 article id 1243. https://doi.org/10.14214/sf.1243
Keywords: spacing; seed orchard management; crown management; seed production
Highlights: Pollen production of Pinus sylvestris began at the same age for all studied stand density and pruning height combinations but increased more rapidly at higher densities; Treatments with dense spacing increased seed production earlier; Many combinations of stand density and target height gave comparable levels of seed production, yielding a wide range of viable management options.
Abstract | Full text in HTML | Full text in PDF | Author Info

Seed orchards are the link between tree breeding and reforestation. This paper presents data on cone, seed and pollen production and seed quality gathered over 21 years in a Pinus sylvestris (L.) experimental seed orchard containing plots with 14 different combinations of stand density and targeted pruning height. The treatments’ stand densities ranged from 267 to 4000 stems ha-1, and the target graft heights ranged from 2 to 6 meters. Pollen production began at the same orchard age for all studied combinations of stand density and target height but the level of pollen production per hectare increased more rapidly in treatments with higher stand densities. In treatments with dense spacing, cone and seed production initially increased more rapidly than in treatments with wider spacing, thereby providing an earlier return on investment and a shorter seed production lag time. However, the levels of cone and seed production in such treatments over the entire study period were not appreciably different to those achieved in treatments with wider spacing and higher target height. The treatments did not differ substantially with respect to seed quality. These results show that comparable levels of seed production can be obtained with different combinations of stand density and target height, giving seed orchard owners and managers a wide range of viable management options.

  • Almqvist, Skogforsk (The Forestry Research Institute of Sweden), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: curt.almqvist@skogforsk.se (email)
  • Jansson, Skogforsk (The Forestry Research Institute of Sweden), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: gunnar.jansson@skogforsk.se
article id 132, category Research article
Mats Berlin, Lars Lönnstedt, Gunnar Jansson, Öje Danell, Tore Ericsson. (2010). Developing a Scots pine breeding objective: a case study involving a Swedish sawmill. Silva Fennica vol. 44 no. 4 article id 132. https://doi.org/10.14214/sf.132
Keywords: Pinus sylvestris; economic weights; bio-economic model; tree breeding; multi-trait selection
Abstract | View details | Full text in PDF | Author Info
The aim of this study was to develop a Scots pine (Pinus sylvestris L.) breeding objective for a vertically integrated sawmill in northern Sweden. The production system was defined as comprising the sawmill and the forests supplying it. Volume per hectare, wood density, survival and straightness were used as objective traits and the related selection criteria were measurements, collected at young tree age, of height, diameter, pilodyn penetration, vitality and straightness. A bio-economic model was used to calculate economic weights for the objective traits identified. We also investigated the efficiency of different selection indices based on these economic weights, in combination with available data on genetic parameters. Furthermore, we studied the effect of different discount rates on the calculated economic weights. The results showed that, compared to the full index (which included all selection criteria), omitting either vitality or straightness had a negligible effect, reducing predicted profit gain per hectare by less than one per cent. Height or diameter each had a greater effect, with a loss of predicted profit gain per hectare of up to 6%. Excluding pilodyn penetration from the selection index caused the largest reduction in predicted profit gain per hectare, amounting to over 10%. However, when both height and diameter were removed the predicted profit gain per hectare dropped to one-third of that based on the full index. Finally, ranking and genetic selection for the developed breeding objective was insensitive to changes in the discount rate.
  • Berlin, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: mats.berlin@skogsforsk.se (email)
  • Lönnstedt, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: ll@nn.se
  • Jansson, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: gj@nn.se
  • Danell, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: od@nn.se
  • Ericsson, Skogforsk, Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: te@nn.se
article id 139, category Research article
Ulf Sikström, Curt Almqvist, Gunnar Jansson. (2010). Growth of Pinus sylvestris after the application of wood ash or P and K fertilizer to a peatland in southern Sweden. Silva Fennica vol. 44 no. 3 article id 139. https://doi.org/10.14214/sf.139
Keywords: fertilization; wood ash; nitrogen; ammonium nitrate; forest yield; needle element concentrations; potassium chloride; raw phosphate
Abstract | View details | Full text in PDF | Author Info
The effects of the application of wood ash and of fertilizer regimes including phosphorus (P) and potassium (K), with and without simultaneous addition of nitrogen (N), were investigated on a stand of Scots pine (Pinus sylvestris L.) saplings growing on a drained oligotrophic peatland site in southern Sweden. A randomized block design was used. Tree growth and concentrations of various elements in the needles were measured. The addition of similar doses of P (approx. 40 kg P ha–1) from different sources resulted in similar growth responses, amounting to 1.6–1.9 m3 ha–1 yr–1 of stem wood over the 26-year study. The P source was either wood ash (2500 kg d.w. ha–1) or PK-fertilizer (raw phosphate and potassium chloride). In response to several treatments there were both increased numbers of trees and increased growth of individual trees. The high PK-dose (40 kg P ha–1 and 80 kg K ha–1) appeared to result in a larger growth increase than the low dose (20 kg P ha–1 and 40 kg K ha–1). The N treatment had no additional effect on growth. In the control plots, tree growth was more or less negligible (0.04 m3 ha–1 yr–1). After almost 26 years, concentrations of P and K in the needles of treated plants were still higher than in the untreated control plants. Nevertheless, in spite of the elevated P concentration, P appears to limit the growth of Scots pine. In conclusion, after sufficient drainage of this type of peatland site, it is possible for a forest stand to develop to the pole stage if wood ash or PK-fertilizer is applied.
  • Sikström, Skogforsk (The Forestry Research Institute of Sweden), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: ulf.sikstrom@skogforsk.se (email)
  • Almqvist, Skogforsk (The Forestry Research Institute of Sweden), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: ca@nn.se
  • Jansson, Skogforsk (The Forestry Research Institute of Sweden), Uppsala Science Park, SE-751 83 Uppsala, Sweden E-mail: gj@nn.se
article id 154, category Research article
Henrik R. Hallingbäck, Gunnar Jansson, Björn Hannrup, Anders Fries. (2010). Which annual rings to assess grain angles in breeding of Scots pine for improved shape stability of sawn timber? Silva Fennica vol. 44 no. 2 article id 154. https://doi.org/10.14214/sf.154
Keywords: Pinus sylvestris; spiral grain angle; warp; sawn timber; breeding
Abstract | View details | Full text in PDF | Author Info
The shape stability properties of sawn timber could be improved by breeding or grading Scots pine (Pinus sylvestris L.) for reduced grain angles. Currently, only grain angle assessments performed in single annual rings can be considered feasible in forest breeding programmes. The relevance of such methods in assessing shape stability traits was evaluated by taking grain angle measurements beneath the bark in a 36-year-old Scots pine progeny trial. Several grain angle measurements from stem discs were also taken from a sample of 162 trees. Phenotypic correlations were estimated between grain angle and the bow, crook and twist developed in 316 sawn and dried boards. All single annual ring assessments, including measurements taken directly under the bark, were significantly correlated with twist. The highest correlations (0.60–0.70) were observed in annual rings numbered 8–20 and at distances of 30–70 mm from the pith, indicating those parts of logs where grain angles have the largest impact on twist. These results suggests, that grain angles measured beneath the bark are relevant to the twist of sawn small timber, and that any single annual ring could be chosen for the assessment, provided that the tree diameter is within the 60–140 mm range. No appreciable correlations were observed between grain angles and either crook or bow.
  • Hallingbäck, Dept of Plant Biology and Forest Genetics, Swedish University of Agricultural Sciences, Uppsala, Sweden E-mail: henrik.hallingback@vbsg.slu.se (email)
  • Jansson, The Forestry Research Institute of Sweden, Uppsala, Sweden E-mail: gj@nn.se
  • Hannrup, The Forestry Research Institute of Sweden, Uppsala, Sweden E-mail: bh@nn.se
  • Fries, Dept of Forest Genetics and Plant Physiology, Swedish University of Agricultural Sciences, Umeå, Sweden E-mail: af@nn.se
article id 189, category Research article
Lars Rytter, Gunnar Jansson. (2009). Influence of pruning on wood characters in hybrid aspen. Silva Fennica vol. 43 no. 4 article id 189. https://doi.org/10.14214/sf.189
Keywords: Populus tremula P. tremuloides; cicatrisation; faultless wood; twig angle; twig diameter
Abstract | View details | Full text in PDF | Author Info
Fast-growing hybrid aspens (Populus tremula L. x P. tremuloides Michx.) are currently of great interest in Sweden since they can produce biomass at high rates and, at the same time, can be used to produce higher value wood products. This study focuses on the effects of pruning hybrid aspen to improve its wood quality. About 50% of the trees in the experimental stand were pruned by removing twigs, at heights up to 4 m, when they were 7–8 years old. Ten years later, 20 pruned and 20 unpruned trees, representing four clones, were randomly selected. Ten knots or twig/stem junctions, respectively, per tree were exposed for inspection using a chain saw and examined. The results revealed that pruned trees cicatrised the knots within about three years and thereafter produced substantial amounts of faultless wood. In contrast, unpruned trees (which had retained almost 80% of their twigs, often as dry twigs with bark pockets) had produced small uneven amounts of quality wood. Removal of twigs with acute angles and/or large diameters resulted in greater colour defects and rot in annual rings outside the pruning position, but the time of cicatrisation was not significantly affected. The results show that pruning can be used to enhance the wood quality of hybrid aspen over a short time period, and that pruning should be performed early during the rotation period when branches are small, in order to minimize discolouration and rot in the new annual rings.
  • Rytter, The Forestry Research Institute of Sweden (Skogforsk), Ekebo 2250, SE-26890 Svalöv E-mail: lars.rytter@skogforsk.se (email)
  • Jansson, The Forestry Research Institute of Sweden (Skogforsk), Uppsala Science Park, SE-751 83 Uppsala E-mail: gj@nn.se

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles