Current issue: 58(4)

Scopus CiteScore 2023: 3.5
Scopus ranking of open access forestry journals: 17th
PlanS compliant
Select issue
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Anneli Viherä-Aarnio

Category : Article

article id 5542, category Article
Leena Ryynänen, Anneli Viherä-Aarnio. (1995). Growth, crown structure and seed production of birch seedlings, grafts and micropropagated plants. Silva Fennica vol. 29 no. 1 article id 5542. https://doi.org/10.14214/sf.a9193
Keywords: Betula pendula; silver birch; flowering; micropropagation; seedlings; seed orchards; seed production; grafts
Abstract | View details | Full text in PDF | Author Info

Growth, crown structure, flowering and seed production of silver birch (Betula pendula Roth) seedlings, grafts and micropropagated plants was compared during four years in a polythene greenhouse experiment. The growth of the seedlings was clearly the most vigorous and that of the grafts the weakest, the micropropagated plants being intermediate. The seedlings had the highest and the grafts the lowest number of branches before cutting the tops of the plants, but the differences between the material types were no more significant after cutting the tops. The grafts had significantly shorter and thinner branches than the seedlings and the micropropagated plants, whereas the differences in branch length and branch thickness between the latter two groups were not significant. The grafts started flowering at the age of two years, one year earlier than the other two types of material. At the age of four years the micropropagated plants had abundant seed production, about 75% of that of the seedlings and about two times higher than that of the grafts. Thus, the micropropagated plants can be used instead of grafts when establishing polythene greenhouse seed orchards of birch.

  • Ryynänen, E-mail: lr@mm.unknown (email)
  • Viherä-Aarnio, E-mail: av@mm.unknown
article id 5541, category Article
Anneli Viherä-Aarnio. (1994). Performance of micropropagated plants of silver birch (Betula pendula) in a field trial. Silva Fennica vol. 28 no. 4 article id 5541. https://doi.org/10.14214/sf.a9181
Keywords: Betula pendula; forestry; growth; mortality; seedlings; clones; tissue culture; clonal propagation
Abstract | View details | Full text in PDF | Author Info

Micropropagated and seed-borne plants of sliver birch (Betula pendula Roth) were compared for survival and growth in a field trial at the age of six years. Three clones for micropropagation were selected from open-pollinated progenies of selected southern Finnish plus trees at the age of 17 and 20. The three seed-borne lots were of southern Finnish stand origin. The best two lots of the experiment as regards the height and diameter growth at the age of six were the clones. The best of these differed significantly from the best-growing seed-grown lot. The weakest lot of the experiment was also a clone which was clearly slow-growing with a dense and bushy crown. Survival of the material was high (mean = 94%), and there was no damage caused by voles and elks, for example. The results clearly show that the selection of material for clonal propagation should be done carefully. The clones should also be tested for performance in the field before propagation on a large scale.

  • Viherä-Aarnio, E-mail: av@mm.unknown (email)
article id 5538, category Article
Anneli Viherä-Aarnio, Leena Ryynänen. (1994). Seed production of micropropagated plants, grafts and seedlings of birch in a seed orchard. Silva Fennica vol. 28 no. 4 article id 5538. https://doi.org/10.14214/sf.a9178
Keywords: Betula pendula; seedlings; seed orchards; seed production; tissue culture; grafting
Abstract | View details | Full text in PDF | Author Info

Seed production of micropropagated plants, seedlings and grafts of Silver birch (Betula pendula Roth) in a polyethylene greenhouse experiment was followed for five years. The grafts started flowering and seed production at the age of two years, one year earlier than other two types of material. At the age of three the seed production of both micropropagated plants and seedlings was already more than two times higher than that of the grafts. Variation between the clones was high and plant type x clone interaction was significant. At the age of four, in 1993, seed production was high in all three types of material. Seed production of the micropropagated plants was two times higher than that of the grafts but about 75% of that of the seedlings. In 1994 seed production of all three plant types was very low, which shows large variation between different years. The early development of the plant material types suggests that micropropagated plants have higher seed production than grafts and could well be used instead of grafts in polythene greenhouse seed orchards.

  • Viherä-Aarnio, E-mail: av@mm.unknown (email)
  • Ryynänen, E-mail: lr@mm.unknown
article id 5531, category Article
Anneli Viherä-Aarnio, Anna Saarsalmi. (1994). Growth and nutrition of willow clones. Silva Fennica vol. 28 no. 3 article id 5531. https://doi.org/10.14214/sf.a9171
Keywords: biomass; short rotation forestry; fuelwood; nutrients; clones; hybridization; Salix
Abstract | View details | Full text in PDF | Author Info

Growth and nutrition of 20 clones representing different species and interspecific hybrids of willows (Salix spp.) growing on an abandoned field were studied. There were highly significant differences between the clones as regards the survival, number of sprouts per stool, sprout mean height and diameter and stem biomass production per stool. The differences between the clones in the concentration of all nutrients in both the leaves and stems were highly significant. 

  • Viherä-Aarnio, E-mail: av@mm.unknown (email)
  • Saarsalmi, E-mail: as@mm.unknown

Category : Research article

article id 9938, category Research article
Jyrki Hytönen, Egbert Beuker, Anneli Viherä-Aarnio. (2018). Clonal variation in basic density, moisture content and heating value of wood, bark and branches in hybrid aspen. Silva Fennica vol. 52 no. 2 article id 9938. https://doi.org/10.14214/sf.9938
Keywords: moisture content; wood; bark; hybrid aspen; basic density; branches; clonal variation; heating value; ash content
Highlights: Hybrid aspen clones differed in their moisture content, ash content, basic density and heating value; Stem wood had lower ash content, basic density and effective heating value than stem bark; There was significant vertical variation in wood and bark along the stem in moisture content and basic density.
Abstract | Full text in HTML | Full text in PDF | Author Info

Hybrid aspen (Populus tremula × P. tremuloides) is one of the fastest growing tree species in Finland. During the mid-1990s, a breeding programme was started with the aim of selecting clones that were superior in producing pulpwood. Hybrid aspen can also be grown as a short-rotation crop for bioenergy. To study clonal variation in wood and bark properties, seven clones were selected from a 12-year-old field trial located in southern Finland. From each clone, five trees were harvested and samples were taken from stem wood, stem bark and branches to determine basic density, effective heating value, moisture and ash content. Vertical within-tree variation in moisture content and basic density was also studied. The differences between clones were significant for almost all studied properties. For all studied properties there was a significant difference between wood and bark. Wood had lower ash content (0.5% vs. 3.9%), basic density (378 kg m–3 vs. 450 kg m–3) and effective heating value (18.26 MJ kg–1 vs. 19.24 MJ kg–1), but higher moisture content (55% vs. 49%) than bark. The values for branches were intermediate. These results suggest that the properties of hybrid aspen important for energy use could be improved by clonal selection. However, selecting clones based on fast growth only may be challenging since it may lead to a decrease in hybrid aspen wood density.

  • Hytönen, Natural Resources Institute Finland (Luke), Natural resources, Teknologiakatu 7, FI-67100 Kokkola, Finland E-mail: jyrki.hytonen@luke.fi (email)
  • Beuker, Natural Resources Institute Finland (Luke), Production systems, Vipusenkuja 6, FI-57200 Savonlinna, Finland E-mail: egbert.beuker@luke.fi
  • Viherä-Aarnio, Natural Resources Institute Finland (Luke), Production systems, Latokartanonkaari 9, FI-00790 Helsinki, Finland E-mail: anneli.vihera-aarnio@luke.fi
article id 7731, category Research article
Anneli Viherä-Aarnio, Pirkko Velling. (2017). Growth, wood density and bark thickness of silver birch originating from the Baltic countries and Finland in two Finnish provenance trials. Silva Fennica vol. 51 no. 4 article id 7731. https://doi.org/10.14214/sf.7731
Keywords: Betula pendula; provenance; bark thickness; frost crack; seed transfer; wood basic density; wood discolouration
Highlights: Baltic origins of silver birch had significantly thicker bark than the Finnish ones; In terms of wood density, no consistent difference was detected between the Baltic and Finnish origins; Incidence of darkened core wood increased with increasing seed origin latitude; Frost cracks were most common in south Latvian origins grown in central Finland.
Abstract | Full text in HTML | Full text in PDF | Author Info

Silver birch (Betula pendula Roth) seed origins from the Baltic countries and from Finland were compared in terms of growth, wood density, bark thickness and the incidence of darkened core wood, frost cracks and decay, and the effect of seed origin latitude was examined in two Finnish provenance trials. The material consisted of 21 stand and single tree origins ranging from latitudes 54° to 63°N from the Baltic countries and Finland. The trials, measured at the age of 22 years, were located at Tuusula (60°21´N), southern Finland and at Viitasaari (63°11´N), central Finland. The Baltic origins were superior to the Finnish ones in the southern trial regarding height, whereas in central Finland the Finnish origins grew better. There was no consistent difference between the Baltic and the Finnish group of origins in wood density. Bark thickness decreased with increasing seed origin latitude. The Baltic origins had significantly thicker bark than the Finnish origins. A moderate positive correlation was detected between the seed origin latitude and the incidence of darkened core wood in the southern trial, where the darkened core wood was more common in the Finnish origins than in the Baltic ones. The highest proportion of trees with frost cracks was detected in the south-western Latvian origins growing in central Finland. Seed transfers from the Baltic would have an increasing effect on the bark thickness of birch logs, but no or only minor effects on wood density. Based on our results, there is no reason to recommend the use of non-native Baltic seed origins in Finland instead of the native locally adapted seed sources.

  • Viherä-Aarnio, Natural Resources Institute Finland (Luke), Green technology, P.O. Box 2, FI-00791 Helsinki, Finland E-mail: anneli.vihera-aarnio@luke.fi (email)
  • Velling, E-mail: pike.velling@phnet.fi
article id 226, category Research article
Anneli Viherä-Aarnio, Pirkko Velling. (2008). Seed transfers of silver birch (Betula pendula) from the Baltic to Finland – effect on growth and stem quality. Silva Fennica vol. 42 no. 5 article id 226. https://doi.org/10.14214/sf.226
Keywords: Betula pendula; yield; provenance; climatic adaptation; stem defect
Abstract | View details | Full text in PDF | Author Info
Silver birch (Betula pendula Roth) seed origins from the Baltic countries, Finland and Russia were compared for survival, growth and stem quality, and the effect of latitudinal seed transfer distance examined in two provenance trials. The trials were located on moist upland forest soils at Tuusula (60°21’N) in southern Finland and at Viitasaari (63°11’N) in central Finland. The material consisted of 21 stand and single tree origins ranging from latitudes 54° to 63°N. Survival, height, dbh, relative stem taper, stem volume/ha and the proportion of trees with a stem defect (vertical branch or forked stem), were assessed when the trees were 22 years old. Significant differences were detected among the origins regarding all the measured traits in both trials. Southern Finnish origins produced the highest volume per unit area in central Finland, whereas Estonian and north Latvian stand seed origins, as well as the southern Finnish plus tree origins, were the most productive ones in southern Finland. The more southern the origin, the higher was the proportion of trees with a stem defect in both trials. The latitudinal seed transfer distance had a significant but relatively small effect on survival, stem volume/ha and proportion of trees with a stem defect. The proportion of trees with a stem defect increased linearly in relation to the seed transfer distance from the south. The relationship of both survival and stem volume/ha to the seed transfer distance was curvilinear. Volume/ha was increased by transferring seed from ca. 2 degrees of latitude from the south. A longer transfer from the south, as well as transfer from the north, decreased the yield.
  • Viherä-Aarnio, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: anneli.vihera-aarnio@metla.fi (email)
  • Velling, Finnish Forest Research Institute, Vantaa Research Unit, P.O. Box 18, FI-01301 Vantaa, Finland E-mail: pv@nn.fi
article id 576, category Research article
Anneli Viherä-Aarnio, Pirkko Velling. (2001). Micropropagated silver birches (Betula pendula) in the field – performance and clonal differences. Silva Fennica vol. 35 no. 4 article id 576. https://doi.org/10.14214/sf.576
Keywords: micropropagation; herbivory; Betula pendula Roth; clone; clonal variation; field testing
Abstract | View details | Full text in PDF | Author Info
Micropropagated and seed-born silver birches (Betula pendula Roth) were compared for survival, height growth and occurrence of biotic damage (voles, hares, mooses, stem lesions and cankers) in field trials in southern Finland. The material consisted of 11 clones and 10 different lots of seedlings growing in 10 field trials, established in clear-cut forest cultivation areas. The plants were 6–7 years old. The micropropagated and seed-born material types did not significantly differ from each other as regards survival, height growth and frequencies of damage caused by biotic agents. Large and significant differences were, however, detected in survival, height and frequencies of all types of biotic damage between single clones. Careful selection and testing of birch clones in field conditions is recommended before wide-scale commercial micropropagation and practical forest cultivation takes place.
  • Viherä-Aarnio, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box. 18, FIN-01301 Vantaa, Finland E-mail: anneli.vihera-aarnio@metla.fi (email)
  • Velling, Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box. 18, FIN-01301 Vantaa, Finland E-mail: pv@nn.fi

Category : Research note

article id 659, category Research note
Anneli Viherä-Aarnio, Pirkko Velling. (1999). Growth and stem quality of mature birches in a combined species and progeny trial. Silva Fennica vol. 33 no. 3 article id 659. https://doi.org/10.14214/sf.659
Keywords: stem quality; growth; Betula pendula Roth; Betula pubescens Ehrh.; Betula papyrifera Marsh.; progeny; timber production
Abstract | View details | Full text in PDF | Author Info
The growth and stem quality of silver birch (Betula pendula), downy birch (B. pubescens) and paper birch (B. papyrifera) were compared in a 32-year-old field trial in southern Finland. The material consisted of different unselected stand origins and progenies of phenotypically selected plus trees of silver and downy birch from southern Finland and differing stand origins of paper birch from the North-West Territories, Canada. Growth, yield and a number of stem quality traits, including taper, sweep, stem defects, heights of different crown limits and length of the veneer timber part of the stem were measured or observed. The native Finnish silver and downy birches were superior to paper birch in terms of both yield and stem quality, silver birch being the best. Progenies of silver birch plus trees were better than the stand origin, indicating that the former are able to reach high quality veneer log size in a shorter time than unselected material. The cultivation of paper birch can not be considered viable in Finland.
  • Viherä-Aarnio, The Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FIN-01301 Vantaa, Finland E-mail: anneli.vihera-aarnio@metla.fi (email)
  • Velling, The Finnish Forest Research Institute, Vantaa Research Centre, P.O. Box 18, FIN-01301 Vantaa, Finland E-mail: pv@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles