Current issue: 58(1)

Under compilation: 58(2)

Scopus CiteScore 2021: 2.8
Scopus ranking of open access forestry journals: 8th
PlanS compliant
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Tiina Laine

Category : Research article

article id 10762, category Research article
Karri Uotila, Jaana Luoranen, Timo Saksa, Tiina Laine, Juha Heiskanen. (2022). Long-term growth response of Norway spruce in different mounding and vegetation control treatments on fine-textured soils. Silva Fennica vol. 56 no. 4 article id 10762. https://doi.org/10.14214/sf.10762
Keywords: boreal forest; establishment; regeneration; site preparation; plantation; tree growth; scarification; fine-textured soils; mechanical vegetation control
Highlights: Spot and ditch mounding methods favoured spruce sapling development on fine-textured soils; Inverted and unprepared plots showed the weakest growth; Vegetation control suppressed the growth differences between site preparation methods; Vegetation control reduced the density of resprouts after early cleaning.
Abstract | Full text in HTML | Full text in PDF | Author Info

Mechanical site preparation (MSP) is a common practice that precedes the planting of Norway spruce (Picea abies (L.) H. Karst.) in Nordic forests. Mounding has become the most used method in spruce planting in recent years. This study examined the effects of different mounding treatments (spot and ditch mounding, inversion, unprepared control with or without herbicide application) and a mechanical vegetation control (MVC) treatment done 3–4 years after planting on the post-planting growth of spruce container seedlings and their development to saplings during the first 11–13 years on two forest till soils in central Finland, one on flat terrain and other on a southwest slope. On these fine-textured soils the spot and ditch mounding methods favoured spruce saplings development. Inversion and unprepared plots showed weakest growth. On the site with flat terrain, 11 years post planting, spruce saplings were 78–144 cm (38–80%) taller and their breast height diameters were 11–13 mm (60–74%) thicker for ditch or spot mounding than for inversion or herbicide treatment. On the site with sloped terrain the differences were minor between the MSP treatments. MVC improved spruce height growth on sites which did not have intensive MSP, especially on control saplings planted on unprepared soil in herbicide and inversion treatments. On the flat terrain, MVC reduced the density of resprouts to be removed later in pre-commercial thinning. As a conclusion, spot or ditch mounding favoured the growth of spruce over inversion especially on flat terrain with fine-textured soil.

  • Uotila, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: karri.uotila@luke.fi (email)
  • Luoranen, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland ORCID https://orcid.org/0000-0002-6970-2030 E-mail: jaana.luoranen@luke.fi
  • Saksa, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland ORCID https://orcid.org/0000-0002-1776-2357 E-mail: timo.saksa@luke.fi
  • Laine, Metsä Forest, Revontulenpuisto 2, FI-02100 Espoo, Finland ORCID https://orcid.org/0000-0002-6448-8274 E-mail: tiina.laine@metsagroup.com
  • Heiskanen, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland ORCID https://orcid.org/0000-0002-0549-835X E-mail: juha.heiskanen@luke.fi
article id 10369, category Research article
Tiina Laine, Ville Kankaanhuhta, Juho Rantala, Timo Saksa. (2020). Effects of spot mounding and inverting on growth of conifers, exposed mineral soil and natural birch regeneration. Silva Fennica vol. 54 no. 5 article id 10369. https://doi.org/10.14214/sf.10369
Keywords: boreal forest; regeneration; site preparation; mounding; young stand management
Highlights: There were 21% fewer naturally regenerated birches ha–1 in inverted areas (22 951) compared to spot mounded areas (29 086); Spot mounding exposed slightly, but not statistically significantly, larger area of mineral soil than inverting; There was no difference in seedling mortality or growth between the site preparation methods.
Abstract | Full text in HTML | Full text in PDF | Author Info

In Nordic forests, consistent evidence about better seedling survival rate and increased growth due to site preparation have been obtained in numerous studies. Proper site preparation method can reduce costs of the whole regeneration chain through its effects on survival of planted seedlings, abundance of natural regeneration and competition in early stand development. This study compared the natural regeneration of birches (silver birch (Betula pendula Roth) and downy birch (B. pubescens Ehrh.)), amount of exposed mineral soil, and growth of planted seedlings between spot mounding and inverting site preparation methods. Present study was conducted in eight forest stands established in 2012 or 2015. Even though difference was not statistically significant, inverting exposed less mineral soil than spot mounding and thus reduced the natural regeneration of birch seedlings by 6135 seedlings ha–1 compared to spot mounding. However, the variation between regeneration areas was remarkable. There was no difference in seedling mortality or growth between the site preparation methods. In order to achieve high growth of conifers, moderate amount of exposed mineral soil and thus less naturally regenerated birch, inverting should be favored over spot mounding.

  • Laine, Metsä Group, P.O. Box 208, FI-70101 Kuopio, Finland E-mail: tiina.laine@metsagroup.com (email)
  • Kankaanhuhta, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: ville.kankaanhuhta@luke.fi
  • Rantala, Metsä Group, P.O. Box 10, FI-02020 METSÄ, Finland E-mail: juho.rantala@metsagroup.com
  • Saksa, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: timo.saksa@luke.fi
article id 1323, category Research article
Tiina Laine, Kalle Kärhä, Antti Hynönen. (2016). A survey of the Finnish mechanized tree-planting industry in 2013 and its success factors. Silva Fennica vol. 50 no. 2 article id 1323. https://doi.org/10.14214/sf.1323
Keywords: regeneration; boreal; forestry; silviculture; mechanization; planting machines; critical success factors (CSFs)
Highlights: In 2013, 31 planting machines were operated by 22 businesses and planted 4.7 million seedlings on 2663 hectares in Finland; Critical success factors included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash; Growth of the industry will depend on improved cost-efficiency, appropriate worksites, marketing, development of planting machines.
Abstract | Full text in HTML | Full text in PDF | Author Info

The aim of the study was to update the information pertaining to mechanized tree-planting activity in Finland in 2013 and its success factors. All businesses providing a mechanized tree-planting service were interviewed and asked to describe their equipment and activities, identify critical success factors (CSFs), and suggest areas for improvement. In 2013, 31 planting machines (18 Bracke P11.a, 11 M-Planter and 2 Risutec) operated by 22 businesses planted approximately 4.7 million seedlings on 2663 hectares. CSFs included expertise of planting machine operators, high quality planting, adequate amount of work, stoniness, and removal of slash. Based on the survey, some recommendations for improving mechanized planting work can be made. Firstly, improving the cost-efficiency of mechanized planting is necessary to enhance businesses’ profitability. Secondly, worksite selection is crucial as stoniness, stumps and slash debris diminish productivity. Lastly, the popularity of mechanized planting in the future will benefit from more marketing. Many businesses were unwilling to increase the area of service, invest in new equipment, or increase the volume of planting work but they believed that mechanized planting will become more popular in the near future.

  • Laine, Natural Resources Institute Finland (Luke), Management and Production of Renewable Resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@luke.fi (email)
  • Kärhä, Stora Enso Wood Supply Finland, P.O. Box 309, FI-00101 Helsinki, Finland E-mail: kalle.karha@storaenso.com
  • Hynönen, University of Eastern Finland, Faculty of Science and Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: hynonena@gmail.com
article id 1161, category Research article
Tiina Laine, Veli-Matti Saarinen. (2014). Comparative study of the Risutec Automatic Plant Container (APC) and Bracke planting devices. Silva Fennica vol. 48 no. 3 article id 1161. https://doi.org/10.14214/sf.1161
Keywords: productivity; regeneration; cost-efficiency; planting cost; mechanized tree planting
Highlights: As currently designed, the prototype Risutec APC fitted with an automatic feeding system offers no significant advantage over the Bracke planting device in terms of planting productivity or quality; Cost estimates suggest that an idealized automated feeding system could increase productivity and decrease unit costs.
Abstract | Full text in HTML | Full text in PDF | Author Info
The productivity of mechanized planting could be increased by minimizing the time spent manually reloading seedling cassettes. This study compared the work-time distribution, productivity and quality of the prototype Risutec APC fitted with an automatic feeding system and the commonly-used and manually-loaded Bracke P11.a. An approach of comparative time study was employed that compared performance of two operators using both machines in four sites where slash and stumps had been removed. Operating costs were estimated and compared for these two machines and an idealized machine with automatic feeding system (referred as AUT). AUT was assumed to be similar to the Bracke planting machine with the only difference being in automatic feeding. Productivity of the Risutec APC (196 seedlings per productive work hour [pl PWh0–1]) was lower than that of Bracke (244 pl PWh0–1), making the unit cost 35.7% higher. A large portion (17.6%) of the productive work time of Risutec APC was interrupted by malfunctions, so it cannot be considered robust and reliable yet. Quality of the planting work was reasonable for both machines. The results suggest that an idealized AUT could increase planting capacity (hectares per year [ha yr–1]) by 15.4% and lower the unit cost (Euro per seedling [€ pl–1]) by 4.7% compared to today’s machines. The importance of an automated feeding system increases with planting efficiency because relatively more time is spent reloading seedlings. Proper automatic feeding system could offer a cost-effective solution and could enhance productivity, but the Risutec APC has yet to meet the technical and economic standards required to be competitive.
  • Laine, Finnish Forest Research Institute (METLA), Suonenjoki Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@metla.fi (email)
  • Saarinen, Finnish Forest Research Institute (METLA), Suonenjoki Unit, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: veli-matti.saarinen@metla.fi
article id 125, category Research article
Juho Rantala, Tiina Laine. (2010). Productivity of the M-Planter tree-planting device in practice. Silva Fennica vol. 44 no. 5 article id 125. https://doi.org/10.14214/sf.125
Keywords: silviculture; cost-efficiency; mechanisation; planting; seedling; technology
Abstract | View details | Full text in PDF | Author Info
Need to mechanise tree-planting work have recently increased for many reasons. The newest planting and soil scarification device performing work in Nordic forests is the Finnish M-Planter. This study aims to clarify M-Planter’s productivity in practice and show how various factors affect it. The follow-up data set covers 607 work shifts, of 13 operators with, in total, five M-Planters. The average productivity figures for the operators were 143 and 169 seedlings per effective working hour during the first and second planting season, respectively. Overall, the measured average productivity was 34.2% lower than that observed in an earlier work study of the M-Planter based on an experimental study design. On average, the operators learned to use the combination of the M-Planter and a base machine more efficiently while their experience in using it increased during the follow-up. Increasing number of stones and stumps as well as a thicker humus layer decreased productivity of the M-Planter. The study concludes that utilisation of the full productivity potential of the M-Planter requires not only good operators but also development of the whole planting service supply chain.
  • Rantala, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: juho.rantala@metla.fi (email)
  • Laine, Finnish Forest Research Institute, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tl@nn.fi

Category : Research note

article id 10195, category Research note
Tiina Laine, Leena Hamberg, Veli-Matti Saarinen, Timo Saksa. (2019). The efficacy of Chondrostereum purpureum against sprouting of deciduous species after mechanized pre-commercial thinning. Silva Fennica vol. 53 no. 3 article id 10195. https://doi.org/10.14214/sf.10195
Keywords: vegetation management; silviculture; mechanization; Chondrostereum purpureum; fungal treatment; stump sprouts
Highlights: Fungal treatments increased stump mortality compared to the control (cutting only); The fungal treatment did not decrease the number of sprouts per stump; Application during mechanized pre-commercial thinning did not yield as high stump mortalities as in earlier treatments performed manually.
Abstract | Full text in HTML | Full text in PDF | Author Info

The use of a white-rot fungus, Chondrostereum purpureum (Pers. Ex Fr.) Pouzar, as a biocontrol agent against sprouting has been studied with good results. The aim of the study was to investigate the efficacy of two pre-commercial thinning machines, Tehojätkä and Mense, to spread an inoculum of C. purpureum as a biocontrol agent on freshly cut birch (Betula pendula Roth and B. pubescens Ehrh.), European aspen (Populus tremula L.), rowan (Sorbus aucuparia L.), and goat willow (Salix caprea L.) stumps (the fungal treatment) and compare that to the control (cutting only, done by Tehojätkä). Efficacy was investigated in terms of stump mortality and the number of sprouts per stump. This study was conducted in one stand and sprouting was investigated for three years after treatment. The fungal treatment resulted in higher mortality of stumps (34.0% for Tehojätkä and 41.5% for Mense after three years), compared to the control (13.4%). However, the fungal treatment did not decrease the number of sprouts per stump compared to the control. The low occurrence of basidiomata indicates that the accuracy of the spreading mechanism was not satisfactory, causing low mortality figures for the fungal treatment compared to previous studies. In the future, this mechanized method may provide a promising alternative in sprout control if the spreading mechanisms, the accuracy of the treatment, and consequently the efficacy could be improved.

  • Laine, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: tiina.laine@luke.fi (email)
  • Hamberg, Natural Resources Institute Finland (Luke), Bioeconomy and environment, Latokartanonkaari 9, FI-00790 Helsinki, Finland E-mail: leena.hamberg@luke.fi
  • Saarinen, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: mulinvuori@gmail.com
  • Saksa, Natural Resources Institute Finland (Luke), Natural resources, Juntintie 154, FI-77600 Suonenjoki, Finland E-mail: timo.saksa@luke.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles