Current issue: 58(1)

Under compilation: 58(2)

Scopus CiteScore 2021: 2.8
Scopus ranking of open access forestry journals: 8th
PlanS compliant
Silva Fennica 1926-1997
1990-1997
1980-1989
1970-1979
1960-1969
Acta Forestalia Fennica
1953-1968
1933-1952
1913-1932

Articles by Perttu Anttila

Category : Research article

article id 10798, category Research article
Perttu Anttila, Johannes Ojala, Teijo Palander, Kari Väätäinen. (2023). The effect of road characteristics on timber truck driving speed and fuel consumption based on visual interpretation of road database and data from fleet management system. Silva Fennica vol. 56 no. 4 article id 10798. https://doi.org/10.14214/sf.10798
Keywords: fuel consumption; forest roads; CAN bus; forest logistics; greenhouse gas emissions; log truck; road classes
Highlights: Finnish road and pavement classes explain driving speed and fuel consumption of a timber truck; Other significant explanatory variables include the number of road crossings, season, proportion of distance travelled with a loader, and total laden mass of a truck; In the future, higher-resolution tracking data is needed to construct generalisable models for 76-tonne vehicles.
Abstract | Full text in HTML | Full text in PDF | Author Info

Road transport produces 90% of greenhouse gas emissions in timber transport in Finland. It is therefore necessary to understand the factors that affect driving speed, fuel consumption, and ultimately, emissions. The objective of this study was to assess the effect of road characteristics on timber truck driving speed and fuel consumption. Data from the fleet management and transport management systems of two timber trucks were collected over a year. A sample of 104 trips was drawn, and the tracking points were overlaid on the road data in a geographical information system. Thereafter, work phases were determined for the points, and they were visually classified into road and pavement classes. Subsequently, the data of 80 trips were utilised in regression analysis to further study the effects of the visually interpreted variables on driving speed and fuel consumption. Fuel consumption was explained by the proportion of forest roads and distance travelled with a loader, and the number of crossings and season when driving without a load. When driving with a load, both asphalt and gravel pavements decreased consumption, in contrast to an unpaved road. Crossings increased fuel consumption, as did the winter and spring months, and the total laden mass of the truck. In conclusion, the study showed that the functional Finnish road and pavement classes can be used to predict driving speed and fuel consumption.

  • Anttila, Natural Resources Institute Finland (Luke), Latokartanonkaari 9, FI-00790 Helsinki, Finland ORCID https://orcid.org/0000-0002-6131-392X E-mail: perttu.anttila@luke.fi (email)
  • Ojala, UPM Metsä, Sirkkalantie 13 b, FI-80100 Joensuu, Finland E-mail: johannes.ojala@upm.com
  • Palander, School of Forest Sciences, University of Eastern Finland (UEF), Yliopistokatu 7, FI-80100 Joensuu, Finland ORCID https://orcid.org/0000-0002-9284-5443 E-mail: teijo.s.palander@uef.fi
  • Väätäinen, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland ORCID https://orcid.org/0000-0002-6886-0432 E-mail: kari.vaatainen@luke.fi
article id 10385, category Research article
Perttu Anttila, Tuomas Nummelin, Kari Väätäinen, Juha Laitila. (2020). The effect of winter weather on timber truck tare weights. Silva Fennica vol. 54 no. 4 article id 10385. https://doi.org/10.14214/sf.10385
Keywords: forestry logistics; payload; tare weight; weather data
Highlights: In a one-year follow-up study of eight timber trucks in Finland, up to 6–12% increase in tare weights was observed in wintertime; Compared with summertime tare weights, the maximum increase varied between 1560 kg and 3100 kg; Potential payload loss was explained by temperature, relative humidity and precipitation.
Abstract | Full text in HTML | Full text in PDF | Author Info

In wintertime, the payload capacity of a timber truck is reduced by snow that accumulates on the structures of the truck. The aim of this study was to quantify the potential payload loss due to snow and winter accessories and to predict the loss with weather variables. Tare weights of eight timber trucks were collected at mill receptions in Finland over a one-year period. Monthly and annual loss of potential payload was estimated using the tare measurements in summer months as a reference. Each load was also connected with weather data at the location and time of delivery and payload loss explained by the weather data with the aid of regression models. The maximum loss of payload varied between 1560 kg and 3100 kg. On a monthly basis, the highest losses occurred in January, when the median values varied between 760 kg and 2180 kg. Over the year, the payload loss ranged between the trucks from 0.5% to 1.5% (from 1.9% and 5.1% in January) of the total number of loads in the study. Payload loss was found to increase with decreasing temperature, increasing relative humidity and increasing precipitation. Although the average payload loss was not very high, the biggest losses occur just during the season of highest capacity utilization. Big differences were also found in the tare weights between the trucks. The results of the study give incentive to develop truck and trailer structures that reduce the adherence of snow.

  • Anttila, Natural Resources Institute Finland (Luke), Latokartanonkaari 9, FI-00790 Helsinki, Finland ORCID https://orcid.org/0000-0002-6131-392X E-mail: perttu.anttila@luke.fi (email)
  • Nummelin, Natural Resources Institute Finland (Luke), Latokartanonkaari 9, FI-00790 Helsinki, Finland E-mail: tuomas.nummelin@luke.fi
  • Väätäinen, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland E-mail: kari.vaatainen@luke.fi
  • Laitila, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland ORCID https://orcid.org/0000-0003-4431-3319 E-mail: juha.laitila@luke.fi
article id 9902, category Research article
Perttu Anttila, Vesa Nivala, Olli Salminen, Markus Hurskainen, Janne Kärki, Tomi J. Lindroos, Antti Asikainen. (2018). Regional balance of forest chip supply and demand in Finland in 2030. Silva Fennica vol. 52 no. 2 article id 9902. https://doi.org/10.14214/sf.9902
Keywords: bioenergy; energy wood; GIS; availability; potential
Highlights: The impact of increasing forest chip demand in 2030 was analyzed in Finland; Demand of small trees may exceed potential at the national level; Surplus potential will remain in logging residues and stumps; Hot spots of demand call for efficient logistical solutions.
Abstract | Full text in HTML | Full text in PDF | Author Info

According to the National Energy and Climate Strategy of Finland in 2016, the demand for forest chips, that is, wood chips made of forest biomass directly for energy use, could even double by 2030 compared to the present situation. A spatially explicit impact analysis of regional supply and demand balances for forest chips was carried out. The balances were calculated as the difference between technical harvesting potentials and demand. First, the technical potentials were estimated based on the national forest inventory data. Secondly, three demand scenarios were defined for 2030 and subsequently deducted from the potentials. The results suggested that there would be increasing competition for feedstock in southern and western Finland, whereas in eastern and northern Finland there would still be surplus potential. Moreover, due to the remarkable deficit of small trees in southern Finland, there might be pressure towards using more pulpwood-sized and/or imported wood in energy production. The results also showed that, in particular, large new plants consuming substantial amounts of forest chips could have a significant effect on the regional availability of forest chips. Moreover, with increasing transport distances, new logistical solutions will be needed.

  • Anttila, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland ORCID http://orcid.org/0000-0002-6131-392X E-mail: perttu.anttila@luke.fi (email)
  • Nivala, Natural Resources Institute Finland (Luke), Eteläranta 55, FI-96300 Rovaniemi, Finland E-mail: vesa.nivala@luke.fi
  • Salminen, Natural Resources Institute Finland (Luke), Latokartanonkaari 9, FI-00790 Helsinki, Finland E-mail: olli.salminen@luke.fi
  • Hurskainen, VTT Technical Research Centre of Finland Ltd, Koivurannantie 1, FI-40400 Jyväskylä, Finland E-mail: markus.hurskainen@vtt.fi
  • Kärki, VTT Technical Research Centre of Finland Ltd, Koivurannantie 1, FI-40400 Jyväskylä, Finland E-mail: janne.karki@vtt.fi
  • Lindroos, VTT Technical Research Centre of Finland Ltd, Vuorimiehentie 3 (Espoo), P.O. Box 1000, FI-02044 VTT, Finland E-mail: tomi.j.lindroos@vtt.fi
  • Asikainen, Natural Resources Institute Finland (Luke), Yliopistokatu 6, FI-80100 Joensuu, Finland E-mail: antti.asikainen@luke.fi
article id 1689, category Research article
Juha Laitila, Eeva Lehtonen, Tapio Ranta, Perttu Anttila, Saija Rasi, Antti Asikainen. (2016). Procurement costs of cereal straw and forest chips for biorefining in South-East Finland. Silva Fennica vol. 50 no. 5 article id 1689. https://doi.org/10.14214/sf.1689
Keywords: supply chains; stumps; young stands; logging residues; delimbed stems; agrobiomass
Highlights: Procurement cost at the plant was 59 € dry tonne –1 when the annual procurement volume of biomass was 100 000 tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%; Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips due to high baling and transporting costs.
Abstract | Full text in HTML | Full text in PDF | Author Info

In Finland the increasing use of biofuel in transport presupposes a search for new raw material sources for biorefining. The aim of this study was, at the regional level, to compare the procurement costs of logging residues, stumps, delimbed stems and cereal straw for biorefining. The accumulation and procurement costs of forest chips and cereal straw were estimated within a 100-kilometre transporting distance via existing road network from an end-use-facility located in Kouvola in South-East Finland. The analyses were performed as simulated treatments in thinnings of young stands, cereal fields and regeneration fellings using existing productivity and cost functions and yield calculations based on crop statistics, the forest industry stand data and the sample plots data of the National Forest Inventory of Finland. Accumulation of raw material assortments and costs of production stages were defined per dry tonnes. Subsidies and raw material prices were excluded from consideration in the study. The results indicate that recovering logging residues requires lower costs than utilization of stumps, delimbed stems or cereal straw. Cereal straw represents an important source of biomass in Kouvola but the cost competiveness is poor compared the procurement costs of forest chips. When the annual procurement volume of biomass was 50 000 dry tonnes the cost at the plant was 49 € dry tonne –1 and biomass was comprised totally of logging residues. Procurement cost grew to 59 € dry tonne –1 when the annual procurement volume of biomass was doubled to 100 000 dry tonnes. Of that amount, the proportion of logging residues was 58.4%, stumps 24.3% and delimbed stems 17.3%. First cereal straw dry tonnes were delivered to end-use-facility, when procurement cost grew to 60 € dry tonne –1 and annual procurement volume of biomass was 110 000 dry tonnes.

  • Laitila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: juha.laitila@luke.fi (email)
  • Lehtonen, Natural Resources Institute Finland (Luke), Green Technology, Halolantie 31A, FI-71750 Maaninka, Finland E-mail: eeva.lehtonen@luke.fi
  • Ranta, Lappeenranta University of Technology, LUT School of Energy Systems, Laboratory of Bioenergy, Lönnrotinkatu 7, FI-50100 Mikkeli, Finland E-mail: tapio.ranta@luke.fi
  • Anttila, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: perttu.anttila@luke.fi
  • Rasi, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, Survontie 9A, FI-40500 Jyväskylä E-mail: saija.rasi@luke.fi
  • Asikainen, Natural Resources Institute Finland (Luke), Bio-based Business and Industry, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: antti.asikainen@luke.fi
article id 1022, category Research article
Eero Muinonen, Perttu Anttila, Jaakko Heinonen, Jukka Mustonen. (2013). Estimating the bioenergy potential of forest chips from final fellings in Central Finland based on biomass maps and spatially explicit constraints. Silva Fennica vol. 47 no. 4 article id 1022. https://doi.org/10.14214/sf.1022
Keywords: biomass; stumps; logging residues; remote sensing; forest energy
Abstract | Full text in HTML | Full text in PDF | Author Info
The technical potential of forest chips from final fellings in Central Finland was estimated using a method based on biomass maps derived from a multi-source forest inventory technique. Image segmentation techniques were applied to a satellite image mosaic to detect stand boundaries. The technical potential of forest chips was computed based on primary forestry residues, i.e. logging residues and stumps from final fellings. Harvesting level definitions for final fellings were established using realized statistics for roundwood at the municipality level as well as larger area statistics. The sensitivity of the potential to ecological and technical constraints in the model was also examined. The technical recovery rate of stump harvesting according to biomass harvesting guidelines was evaluated separately. The critical prerequisites for using the advanced, spatially explicit approach to analysing forest energy potentials may lie in the existence of spatially explicit forest inventory data and the biometric models for tree biomass assortments. The method applied was capable of taking into account the constraints that rely upon map data, such the actual forwarding distance or steepness of the slope in the terrain. The calculation results can be used for strategic decision making in the field of forest bioenergy production.
  • Muinonen, Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: eero.muinonen@metla.fi (email)
  • Anttila, Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: perttu.anttila@metla.fi
  • Heinonen, Finnish Forest Research Institute, Joensuu Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: jaakko.heinonen@metla.fi
  • Mustonen, Stora Enso, Talvikkitie 40 C, FI-01300 Vantaa, Finland E-mail: jukka.mustonen@storaenso.com
article id 143, category Research article
Juha Laitila, Jani Heikkilä, Perttu Anttila. (2010). Harvesting alternatives, accumulation and procurement cost of small-diameter thinning wood for fuel in Central Finland. Silva Fennica vol. 44 no. 3 article id 143. https://doi.org/10.14214/sf.143
Keywords: biomass resources; multi-tree-handling; delimbed stemwood; whole trees; Finland; early thinnings; forest chips
Abstract | View details | Full text in PDF | Author Info
This study compared harvesting alternatives, accumulation and procurement costs of small-diameter thinning wood chips for fuel, when trees were harvested either as delimbed stemwood or whole trees. The calculation was made for a hypothetical plant located in Central Finland and the radius of the procurement area was 100 km via the existing road network. Cutting was done with conventional harvester head equipped with multi-tree-handling (MTH) accessories, with the logged trees being chipped at the roadside storage. The cost of delimbed stemwood chips at heating plant was 24% higher compared to the cost of whole tree chips. The availability analysis attested that delimbing lowered the regional cutting removal by 42% compared to the whole tree harvesting, when the minimum accumulation for the fuel fraction at the stand was set at 25 m3/ha. Delimbing diminishes the recovery rate at the site, resulting in a diminishing number of potential recovery sites meeting the threshold volume. However, the study showed that the forest energy potential is increased and procurement costs are reduced, if delimbed stemwood is harvested from stands where the whole tree harvesting is not acceptable due to nutrient loss or for other ecological reasons. Intelligent selection of cutting methods for different stands enables minimization of transport distance and control of procurement cost.
  • Laitila, The Finnish Forest Research Institute, Joensuu, Finland E-mail: juha.laitila@metla.fi (email)
  • Heikkilä, L&T Biowatti Oy, Seinäjoki, Finland E-mail: jh@nn.fi
  • Anttila, The Finnish Forest Research Institute, Joensuu, Finland E-mail: pa@nn.fi
article id 345, category Research article
Pekka Hyvönen, Perttu Anttila. (2006). Change detection in boreal forests using bi-temporal aerial photographs. Silva Fennica vol. 40 no. 2 article id 345. https://doi.org/10.14214/sf.345
Keywords: forest inventory; discriminant analysis; change detection; aerial photography; continuous updating
Abstract | View details | Full text in PDF | Author Info
Increased need for timely forest information is leading to continuous updating of stand databases. In continuous updating, stand attributes are estimated in the field after an operation and stored in databases. To find the changes caused by operations and forest damage, a semi-automatic method based on bi-temporal aerial photographs was developed. The test data were classified into three classes: No-change (952 stands), Moderate-change (163 stands) and Considerable-change (44 stands). The aerial photographs were acquired in years 2001 and 2004 with almost the same image specifications. Altogether 110 features at stand level were extracted and used in change detection analysis. The test data were classified with stepwise discriminant analysis. The overall accuracy of classification varied between 75.3 and 84.7%. The considerable changes were found without error, whereas the Moderate-change and No-change classes were often confused. However, 84.2% of thinned stands were classified correctly. The best accuracy in classification was obtained by using the histogram and textural features extracted from the original, uncorrected images. Radiometric correction did not improve the accuracy of classification. Soil type, characteristics of the growing stock and the location of a stand in an image were found to affect the change detection. Before the method can be applied operationally, issues related to, e.g., confusion between No-change and Moderate-change must be solved.
  • Hyvönen, Finnish Forest Research Institute, Joensuu Research Unit, P.O. Box 68, FI-80101 Joensuu, Finland E-mail: pekka.hyvonen@metla.fi (email)
  • Anttila, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: pa@nn.fi
article id 544, category Research article
Perttu Anttila. (2002). Updating stand level inventory data applying growth models and visual interpretation of aerial photographs. Silva Fennica vol. 36 no. 2 article id 544. https://doi.org/10.14214/sf.544
Keywords: aerial photographs; stand level inventory; MELA; updating of inventory data; visual interpretation
Abstract | View details | Full text in PDF | Author Info
In this study two procedures for updating stand level inventory data were developed and tested. The development of the growing stock of 62 stands over 12 years was simulated in the MELA stand simulator with no prior information of rapid changes, such as clear-cuttings. The acceptability of the simulation was decided standwise with visual interpretation of aerial false-colour photographs. If the simulated data were not accepted, new stand attributes were assessed with photo interpretation in procedure 1. In procedure 2, on the other hand, it was possible to utilise old management proposals. In case a cutting or other operation had been proposed and it looked like the operation had been realised, the interpreters accepted the proposal. Otherwise the last implemented operation and implementation year were interpreted. In case no operation had been carried out during the updating period but the growth model updated data were not acceptable, the same stand characteristics were estimated as in procedure 1. Stands where a proposal had been accepted or an operation interpreted were later updated again in MELA so that the program simulated the operations. The Root Mean Squared Errors of stem volume were 62 and 57 m3 per ha (34 and 30%) with procedures 1 and 2. With procedure 2 the accuracy of updating was comparable with a stand level field inventory carried out in the study area. The productivity of the photo interpretation procedures was 57 and 84 ha per h, respectively, whereas the productivity of a field inventory has been 3.3–5 ha per h.
  • Anttila, University of Joensuu, Faculty of Forestry, P.O. Box 111, FI-80101 Joensuu, Finland E-mail: perttu.anttila@joensuu.fi (email)

Category : Discussion article

article id 610, category Discussion article
Risto Päivinen, Perttu Anttila. (2001). How reliable is a satellite forest inventory? Silva Fennica vol. 35 no. 1 article id 610. https://doi.org/10.14214/sf.610
Keywords: forest inventory; remote sensing; satellite images
View details | Full text in PDF | Author Info
  • Päivinen, European Forest Institute, Torikatu 34, FIN-80101 Joensuu, Finland E-mail: risto.paivinen@efi.fi (email)
  • Anttila, European Forest Institute, Torikatu 34, FIN-80101 Joensuu, Finland E-mail: pa@nn.fi

Register
Click this link to register to Silva Fennica.
Log in
If you are a registered user, log in to save your selected articles for later access.
Contents alert
Sign up to receive alerts of new content
Your selected articles