A spatial growth model is presented for Scots pine (Pinus sylvestris L.) on a dwarf-shrub pine mire drained 14 years earlier. The growth model accounts for the variation in tree diameter growth owing to the competition between trees, the distance between tree and ditch, and the time passed since drainage. The model was used to study the effect of tree arrangement on the post-drainage growth of a pine stand. Clustering of trees decreased the volume growth by 9–20% as compared to a regular spatial distribution. Stand volume growth, for a given number of stems, was at its maximum and variation in diameter growth at its minimum when the stand density on the ditch border was 1.5–5 higher than midway between two adjacent ditches.
Bilberry (Vaccinium myrtillus L.) and lingonberry (V. vitis-idaea L.) can be a part of healthy diet and are important for many animals. Two approaches are described to assessing their vegetation cover and berry yield via national forest inventory (NFI) observations. The aim was to provide estimates and predictions of the abundance and yield of the species at regional and national levels in Finland and Sweden. In Finland, the model-based predictions are used in evaluating the impacts of cutting intensity on forest berries needed in forest-related decision making. In Sweden, seasonal inventory-based estimates are used to evaluate the annual national and regional berry yields, and in a forecasting system aimed at large public and berry enterprises. Based on the NFI sample plots measured between 2014 and 2018, the total annual yields are estimated to be 208 Mkg of bilberry and 246 Mkg of lingonberry on productive forest land (increment at least 1 m3 ha–1 year–1) in Finland, and 336 and 382 Mkg respectively in Sweden (average of NFI inventories in 2015–2019). The predicted development of berry yields is related to the intensity of cuttings in alternative forest management scenarios: lower removals favoured bilberry, and higher removals lingonberry. The model-based method describes the effects of stand development and management on berry yields, whereas the inventory-based method can calibrate seasonal estimates through field observations. In providing spatially and timely more accurate information concerning seasonal berry yields, an assessment of berry yields should involve the elements of both inventory-based and model-based approaches described in this study.
Young, dense forest in Finland and Sweden urgently need to receive first thinning. In such stands, conventional selective thinning methods make the harvester work time consuming and, thus, costly. To make small-sized trees economically competitive as raw material for bioenergy and biorefining, new harvesting technologies and/or thinning methods need to be developed. A potential solution is boom-corridor thinning (BCT), rendering effective cutting work. The aim of this study was to describe and compare the stand structure of two Scots pine stands (Pinus sylvestris L.) and one birch-dominated (Betula pendula Roth with natural downy birch, B. pubescens Ehrh.) stand after BCT and selective thinning at the first thinning phase. Furthermore, simulations were conducted to predict the future stand development after the first thinning treatments. The density of the growing stock was 16–46% higher after BCT treatment than after selective thinning because BCT stands included more small and supressed trees with a dbh < 100 mm. However, the numbers of future crop trees with a dbh > 140 mm per hectare were at the same level in both treatments. The stem volume removal per hectare did not differ between treatments. However, simulation of stand development and intermediate thinning and clearcutting revealed that the total removal volume was 10–18% higher in BCT stands compared to selectively thinned ones. The saw log volumes harvested did, however, not differ between treatments. This study shows that BCT generates stands with higher biodiversity compared to conventional thinning as higher levels of biomass removal can be reached throughout stand rotations.
The time consumption (TC) of pre-commercial thinning (PCT) varies greatly among sites, stands and forest workers. The TC in PCT is usually estimated by field-assessed work difficulty factors. In this study, a linear mixed model for the TC in PCT was prepared by utilizing forest resources data (FRD). The modelling data included 11 848 and validation data included 3035 worksites with TC information recorded by forest workers within the period of 2008–2018. The worksites represented a range of site and stand conditions across a broad geographical area in Finland. Site and stand characteristics and previous management logically explained the TC in PCT. The more fertile the site, the more working time was needed in PCT. On sites of medium fertility, TC in the initial PCT increased with stand age by 0.5 h ha–1 yr–1. Site wetness increased the TC. PCT in summer was more time consuming than in spring. Small areas were more time consuming to PCT per hectare than larger ones. The between-forest worker variation involved in the TC was as high as 35% of the variation unexplained by the TC model. The coefficient of determination in validation data was 19.3%, RMSE 4.75 h ha–1 and bias –1.6%. The TC model based on FRD was slightly less precise than the one based on field-assessed work difficulty factors (removal quantity and type and terrain difficulty): RMSE 4.9 h ha–1 vs. 4.1 h ha–1 (52% vs. 43%). The TC model could be connected to forest information systems where it would facilitate the predictions of the labour costs of PCT without field-assessing work difficulty factors.
Operating conditions affecting the quality of spot mounding by Bracke continuously advancing mounders were investigated on 66 regeneration areas (124 ha) in eastern Finland. The quality of mounds was classified as suitable (good or acceptable after additional compression) or unsuitable for planting. Models were constructed for the number of suitable planting spots obtained per hectare (good and acceptable mounds), the probability of successful mounding (≥1600 planting spots ha–1) and the probability of creating a suitable mound as a function of terrain, site and soil characteristics, as well as slash conditions (removed, fresh or dry logging residues). The average number of mounds created was 1892 ± 290 mounds ha–1, of which 1398 ± 325 mounds ha–1 (74%) were classified as suitable for planting. The quality of spot mounding was reduced by steep terrain, a thick humus layer and fresh logging residues. Stoniness and soil texture also affected the number of planting spots created. Mounding after logging residues had dried increased the number of planting spots by 191 spots ha–1 compared with mounding in the presence of fresh residues. Removing residues did not significantly increase the number of planting spots compared with mounding amongst dry residues. A thick humus layer, very stony soil, steep slopes and valley terrain decreased the number of planting spots by 150–450 spots ha–1. The number and quality of mounds varied considerably according to the operating conditions, but with careful selection of timing and sites the quality obtained by a continuously advancing mounder can be improved.